Hi,
I was installing recovery on my phone but my phone LG P350 (Optimus Me) got stock to "Fastboot mode started" when it tries to reboot itself. Now I cant even use my phone.
When I plugged my USB it says:
Fastboot mode started
udc_start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTOR 128 6 1006 0 10
-- reset --
-- portchange --
-- reset --
-- portchange --
I was on this thread for p500, did the intructions and replaced files from p500 - p350.
link: http://forum.xda-developers.com/showthread.php?t=1088046
But when I tried keying cmd command and typed "fastboot erase recovery", it just says "waiting for device". I really hope someone can help me on this one. Thanks a lot in advance
/sob... T_T I really hope someone would help me out on this problem.
Same problem happened with my P500 today.. I resolved it by flashing KDZ through Emergency mode.
There was no other way. The "fastboot erase recovery" command would stop at "waiting for devices".
Hope so, u resolved the problem since its long back this thread was posted.
If u are still stuck at fastboot mode and no other method works.. Then, kdz may be only way if Emergency Mode can be accessed.
that far i found the same solution, but the weird thing is, everybody is writing to use KDZ_FW_UPD.RAR LG flash utility, but it is nowhere to be found for downloading???
I too face the same problem..the kds shows "device not connected"...i installed the latest drivers for lg p350 but still it shows no response...i read somewhere to open the mob in emergency mod but on doing so also no result...someone pls help me
Related
So i just got my first android device about 4 hours ago. Been reading a lot and got the sdk all setup. ADB is working fine i can see the device by typing "adb devices". I've added Fastboot to the .bash_profile and "fastboot --help" shows the help file so its working but i'm trying to flash a recovery.img and after i put in "fastboot flash recovery recovery.img" i just get "<waiting for device>
Its a Dell Streak and i know the id is -i 0x413c I've been searching google like a mad man and every instance i find is either for ubuntu or XP and solved by updating the drivers yet there is no need for the drivers on Mac.
Any help?
figured it out.. i had so many tabs open and so much going on i overlooked the simplest thing!
the device wasn't in bootloader mode! haha (power on device while holding the camera button to get into fast boot...) i feel like a fool... oh well, we all have our days right?
waiting for device
Hi fone_fanatic, I got similar problem. I've been trying to search for solution but I just found your post. I hope you can help me out.
I was trying to install recovery to my LG P350, got errors and when it reboots it self, it just says:
fastboot mode started
udc_start()
and when I plugged it in to my pc it says:
fastboot mode started
udc_start()
-- suspend --
-- reset --
-- portchange --
-- reset --
and so on and so forth...
I have tried downloading sdk and all drivers needed for my lg phone.
Tried using cmd promt and typed in "cd (directory where skd located)"
Then typed in "fastboot erase recovery" It says waiting for device. Tried "fastboot devices" but no list for devices.
I am not familliar with bootloader mode. I really hope you can give me some hints or fix for my problem. Thanks in advance..
Hi, first time i am sorry for my bad english.
I have problem with my LG optimus ONE P500. I want to root this phone, so i used manual from link:
http://forum.xda-developers.com/showpost.php?p=15217609&postcount=3
First step, I enabled debubing mode in my phone settings and I connected this phone to notebook over USB cable. I followed steps from manual. After click Download button in LGMDP, phone reboot to emergency mode (green screen) and start. LGMDP recovered and restored NV2 backup and then started upload modificate NV2 to photo (with text something like - burning, but I not sure). After 20 min LGMDP show text: TIMEOUT. Next step I wait a few minutes and disconnected my phone from notebook and manualy rebooted him. If I turn on my phone, Android OS started and worked normaly.
Next step I turn off my phone and use three-button combinatio (home + vol down + power) and phone booted to „fastboot“ mode with text:
Fastboot mode started
udc_start()
Click to expand...
Click to collapse
After connection phone to notebook, display show next lines:
-- suspens --
-- reset --
-- portchange --
-- reset --
-- portchange --
fastboot: processing commands
Click to expand...
Click to collapse
I can´t turn on phone normaly. So I searched manual how to revive a bricked P500 on fastboot mode (link on manual http://forum.xda-developers.com/showthread.php?t=1088046)
But when i write command in windows command line „fastboot erase recovery“ i get message < waiting for device >
Now I trying find and instal a lot of drivers for P500. Windows device manager normal show connected device under Android Phone - USB Modem Phone ADB port. I used LGMobile Support Tool for download driver too. I tried Windows XP and Windows 7, but the same problem. Command line still show <wainting for device>.
I don´t know how to deal problem with communication between phone and notebook. I spend 10 hours with searching how to solve this problem, but all attempts have failed.
Please can you help me?
- Follow the steps mentioned in this Thread :good:
http://forum.xda-developers.com/showthread.php?t=1827723
Phone :- LG Optimus One
Current ROM :- Paranoid Android 2.52 by ByteCode
Good evening all, My last hopes stands here guys. I have an LG Optimus 3D p920, which is completely bricked. I can't access download mode anymore, actually there is no signs of life on the phone. I searched alot on google and found this: http://forum.xda-developers.com/showthread.php?t=1942836 . I successfully installed all drivers (Changing port to 41, ETC...), and can enter Download, and fastboot mode Using OmapBoot, and OS_Hacking.
When it comes to lgflashtool, I select the BOOTV21E_AP.bin and the LGP920_110622.dll, and selecting port 1 and 10, And start. It says ready, I enter download mode using the omapBoot, And it starts. The log looks good till It reaches to:set capabilities to be used, Baudrate Change: 115200bps ===> 3000000, set flash id error, Error WM_PROGRESS_MSG, Error WM_PROGRESS_MSG, FAIL. I tried smartflash, same. I used os_Hacking [All-In-One][P920].bat, When I try flashing anything from the list, it gives me the following error: failed (remote partition does not exist) . Please Help, and thank you for your time.
Please guys I really need this phone back. I think I may found the problem, is it possible for data saved somewhere and is conflictiong with the flash process? is there anyway to delete them?
Anyone?
I'm having the same problem
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
bkpaokfc said:
hey guys I need a huge help i try update my phone with lg flash tool and it stucked. After that i try to boot into download mode again but phone automatic goes to fastboot i see some messages
Code:
[660]fastboot_init()
[670]loading keystore failed status 6 [770] USB init ept @ 0x9f1df000
[790]udc_start()
[900] -- reset --
[910] --portchange --
[950] -- reset --
[950] -- portchange --
[1130] fastboot: processing commands
[2218040] fastboot:getvar:partition-type:boot
i try to install twrp and when i send the command it fails . What happened to my phone? Is there any solution? What i have to do? My computer detects the phone to fastboot mode , so drivers are fine!
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Unfortunally there isn't device forum for your mentioned device so the better way to ask is to do it here >>> Android Q&A, Help & Troubleshooting
Good luck!
Today I got a message that I could update my telephone. So downloaded it, restarted and just near the end of the update install it gave an error.
I tried to restart but didn't get past the boot screen. I can get into the selection menu of recovery mode/ factory mode.
But when I choose factory mode I don' t get past the boot screen and in recovery mode I get a "dead android with: no command" and there is nothing I can do. (I wiped the cache etc. but nothing helped) (ALPS.KK1.MP3.V1)
And I can' t apply an update from ADB because when I connect it to my PC (windows 10) I get the message its not recognized.
Device manager gives this error: Unknown USB device (Device Descriptor Request Failed) Error Code 43.
If I connect my telephone via USB using ubuntu (15.10) it isn' t recognized at all not even when i check with the lsusb command.
I hope someone has an idea to steer me on the right way!
solved
Well.. seems like trying a different cable, trying many usb drivers and reading a bit better also helps! So if you read this and have the same problem: keep trying/ searching/ reading!