HI,
Today there was a popup on my notifications that there was a FW update.
So yeah i did update it came to the recovery menu thing it did say installing and then ERROR.
The phone turned off and then i did turn it back on and it did boot in Recovery Mode.
I tried restarting the phone 3 times.
The menu looks like this.
Android system recovery <3e>
Acer_AV0K0_Z500_1 .012. 00_EMEA_GEN1s
Volume up/down to move highlight;
enter button to select.
reboot system now
apply update from external storage
wipe data/factory reset -I did try this
fastboot mode
demo mode
Prytex said:
HI,
Today there was a popup on my notifications that there was a FW update.
So yeah i did update it came to the recovery menu thing it did say installing and then ERROR.
The phone turned off and then i did turn it back on and it did boot in Recovery Mode.
I tried restarting the phone 3 times.
The menu looks like this.
Android system recovery <3e>
Acer_AV0K0_Z500_1 .012. 00_EMEA_GEN1s
Volume up/down to move highlight;
enter button to select.
reboot system now
apply update from external storage
wipe data/factory reset -I did try this
fastboot mode
demo mode
Click to expand...
Click to collapse
Hi, and thank you for using XDA Assist
Unfortunally there isn't a specific thread for your device, but the best way to get an answer is to ask over here > Android Q&A, Help & Troubleshooting
Related
Hey people, after I tried update my phone, I can't get it out of recovery mode. As I reboot it, it gives my an Acer logo, vibrates and reboots again. Then the next picture appears:
Android System recovery <2e>
Use trackball to highlight;
click to select.
reboot system now [Home+back]
apply sdcard:update.zip [Alt+S]
wipe data/factory reset [Alt+W]
wipe cache partition
___________________________
E: Can't open /cache/recovery/command
Click to expand...
Click to collapse
I think my software is not properly installed because while updating my pc was acting weird. I tried different key combinations: 0+Q, thats probably why's the phone is in recovery mode. Volume up + Volume down + Power Button, nothing did work.
Has any of you guys a solution to get my phone running again. I would really appreciate it!
Niels
Isn't there anyone out there with a solution? Or is the only way back to send it back to the factory with the risk of a high payment?
try updating again with a safer computer
resolved
update I have successfully got clockwork recovery installed still will not boot past splash screen
help anyone?
jgrand03 said:
update I have successfully got clockwork recovery installed still will not boot past splash screen
help anyone?
Click to expand...
Click to collapse
You can try wiping data/ factory reset. Boot into Recovery Mode by holding down Power and Volume Up buttons together until the screen turns on. When the Samsung logo appears, let go of the Power button but keep holding down the Volume Up button until the device boots into recovery. In Recovery Mode, select Wipe data/Factory reset and select Yes on next screen. Select Reboot system now to reboot the tablet
Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Hi, I am having the same problem, did you get the recovery back?
i am getting this phone, and i will try to dump the system image
emensch said:
Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Click to expand...
Click to collapse
BobbyAddams said:
Hi, I am having the same problem, did you get the recovery back?
Click to expand...
Click to collapse
Here are the system boot and recovery images
https://docs.google.com/file/d/0BwvFJ8wh88noVkE3SzFaU0I4NHM/edit?usp=docslist_api
Sent from my Venue 8 3830 using XDA Free mobile app
How can you get into recovery? I'm in a loop.
cma371 said:
How can you get into recovery? I'm in a loop.
Click to expand...
Click to collapse
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Dead android
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Dead android with the door open and a red triangle with exclamation mark.
Cant even wipe the cache partition.
Cant 'reboot system now'.
Had to do the battery pull.
Started fine.
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Nope! To get into recovery mode (at least for the BLU Advance 4.0L A010U) you do the following:
1. Press (and keep holding) the Volume button in the middle so that both UP and DOWN are simultaneously pressed
2. Press (and keep holding) the Power button until you see on the screen two white lines saying:
Recovery Mode: Volume Up
Factory Mode: Volume Down
3. Press Volume UP once (do not hold). The intro logo "BLU Bold like us" will show up for a few seconds. Then you will see a black screen with a dead android, its belly open, a red exclamation mark and a line of white letters below saying:
No command
4. Press once the power button.
You are now in system recovery mode: Use Volume Up/Volume Down to select what you want to do and use the menu button on the lower-left to enter that command.
I need NVRAM file for my BLU Advance L A010. I now have invalid IMEI and I think it's because the phone was formatted but they never reflashed the entire ROM, just system, recovery, boot etc. So phone boots up fine but no nvram is present. If I could get nvram file for this phone, I can update the IMEI using MTK Engineering.
Can anyone help? Or does anyone know where I can get the complete stock ROM for this device. Most stock BLU ROMs posted online only provide the basic images needed to recover the device.
Hi for all and all G2 LS980 users
In my phone was installed rom CloudyG3. And I decided to install this rom (
http://forum.xda-developers.com/lg-g2/development/lollipop-grola-rom-5-0-1-t3028569)
I started to install rom in my phone LS980, I made full wipe, then instal this V2 rom, after installation wrote that successfully finished, and I pressed the reboot button.
So, the phone has rebooted and now on my screen is write: [860] Fastboot mode started
I flashed the all partitions (with LS980ZVE partitions .img file) in fastboot, "but" wheen I did the fastboot reboot, the phone has rebooted and after few seconds, on the screen I got a LG (symbol) an the text: Security Error ...
Now the phone automatically restarts when it comes to that stage (Security Error) , I can not enter download mode, I can not enter download mode, the phone constantly restarts after a message on the screen: Security Error
Thus I decided to open my phone, and I saw one of microprocessadorees who has written other model: MN0112-B201 LG G2 ZV8_13
I think(understand) I did the flash but with the files that were to another device.
So, now when I press the "Volume down + Power" I have acces to the:
Android system recovery <3e>
KOT49I.LS980ZVE
Volume up/down to move highlight;
enter button to select.
reboot system now
apply uptdate from external sdcard
apply update from cache
apply update from ADB
wipe data/factory reset
wipe cache partition )
Video with phone actually situation:
https://www.youtube.com/watch?v=Oj0vJbWra-A
Who know what happen ? And what I need to do next ?
Help me please.
Hi, thank you for using XDA Assist. I see you've posted here you, http://forum.xda-developers.com/lg-...hard-brick-t2904404/post61443693#post61443693. That's the best place to get help. Our mission at XDA Assist is to get you to the right place to get help. We are not a help desk. Also, power XDA rules only post your question once. Since you've posted in the correct area I'm going to close this thread.
Hello.
I have recently attempted to update my P6800's firmware from stock Android 4.0.4 to a custom 4.4 version (one of Daniel_hk's firmwares.)
I have wiped data cache and user data, and the firmware, when I attempted to install it, gave me an "E: signature verification error" error. Attempts to reboot or to install a stock 4.0.4 or 3.2 firmwares from the microSD card failed with similar errors.
I was told I can flash the device via Odin, reducing it to 3.2 and then upping the versions properly, but I cannot switch the device on into download mode, because it is stuck in usual recovery mode.
Please help.
waleeds1 said:
There will be an option reboot to bootloader from there you can go to download i guess
Click to expand...
Click to collapse
The options I get are
Reboot the device
Install stuff from SD card/navigate on SD card
Wipe data/factory reset
Wipe cache
Apply update from cache.
Which of them is the option you describe? Do I need to put the bootloader on the SD?
Altasaire said:
The options I get are
Reboot the device
Install stuff from SD card/navigate on SD card
Wipe data/factory reset
Wipe cache
Apply update from cache.
Which of them is the option you describe? Do I need to put the bootloader on the SD?
Click to expand...
Click to collapse
Greetings and welcome to assist. You are in stock recovery there so the option to reboot to bootloader is missing. You should be able to power down the tablet then boot into download mode with the power button and volume key
Good Luck
Sawdoctor
sawdoctor said:
Greetings and welcome to assist. You are in stock recovery there so the option to reboot to bootloader is missing. You should be able to power down the tablet then boot into download mode with the power button and volume key
Good Luck
Sawdoctor
Click to expand...
Click to collapse
Do I need for it to fully lose charge? It just switches on to recovery if I let it run until the battery is dry, then charge it again. Powering it down treats the power button as enter button, so I cannot actually switch it off (unless I am doing something wrong.)
Thanks for the welcome, I appreciate your help.
Altasaire said:
Do I need for it to fully lose charge? It just switches on to recovery if I let it run until the battery is dry, then charge it again. Powering it down treats the power button as enter button, so I cannot actually switch it off (unless I am doing something wrong.)
Thanks for the welcome, I appreciate your help.
Click to expand...
Click to collapse
There are only the power button and volume button on your device, no physical home button like a phone ? If press and hold volume down and power the phone should reboot showing the samsung logo. Let this happen twice then let go it should go into download mode