Hi,
I've just gotten my new s6 and I found there was a bit too much bloatware on it so I went ahead and tried to root it using CF-Autoroot.
I went into download mode, opened up Odin and tried flashing it. It said passed, then when it booted up it got stuck on the samsung logo and said "recovery is not seandroid enforcing" at the top.
I had the latest software update on my s6 (which came out like a couple of days ago), this is probably why it didn't work. I've tried flashing this "stock firmware" I found on the net with Odin but it gets stuck on "Setupconnection".
Any help is well appreciated.
Try a different cable, or try rooting with unikernel, it might boot up after that
Sent from my SM-G920T using Tapatalk
serio22 said:
Try a different cable, or try rooting with unikernel, it might boot up after that
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
My problem doesn't lie within Odin, it's just that I'm bricked and no matter what I try it does not work.
I tried to flash Unikernel and I've also tried flashing TWRP as well as quite some full stock ROMs, nothing seems to be working. I'm out of ideas.
This is what I get when I try to install a full stock rom
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If anyone could help me via skype my skype name is thefastandme
Thanks in advance
What message do you get when you flash twrp?
Sent from my SM-G920T using Tapatalk
serio22 said:
What message do you get when you flash twrp?
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
I fixed it, TWRP was installing correctly but it would boot into normal mode before I was able to get into recovery.
thefastandme said:
I fixed it, TWRP was installing correctly but it would boot into normal mode before I was able to get into recovery.
Click to expand...
Click to collapse
So your phone is working again?
Have fun customizing!
I have same problem as OP with the S6, could you share how you fixed the problem?
Related
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I am also having this same issue when trying to use CF autoroot and if I try to flash any custom recovery.
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
OK tried using odin 3.10.7 and it still failed at the same exact point:crying:
Suntar said:
I have OG1 on my S5 and never had a problem with getting root. I used Odin3_v3.10.7 and used CF-Auto-Root-kltespr-kltespr-smg900p.tar.md5. TWRP works well but I used Philz. Try this order when rooting. Its seems to me its always something small that your missing.
Put your phone in download mode
activate odin and then plug in your phone to the usb.
click on the AP tab load the md file from cf auto root
make sure your comm port shows up and is blue, if all is right
click the start button and in 9 seconds you should be rooted and then follow up with twrp or Philz and you should be all set...
Click to expand...
Click to collapse
[email protected] said:
My Galaxy S5 (Sprint) updated to G900PVPU3BOG1 "OG1" firmware.
SInce then I can not root the phone with CF-Auto_root as usual. I tried TWRP (my fav), Clockworkmod, & philz touch. All give me a FAIL in ODIN.
I tried ODIN 3.10 and 3.09.
I also tried to flash custom ROMs with ODIN with similar FAIL in ODIN.
Now, I've flashed and rooted my S3 and S5 a number of times of different PCs without issues but nothing seems to work since I got OG1.
Is this a security issue with OG1? Am I missing something? I've exhausted all options I know of.
Joe
Here is what ODIN says when applying TWRP 2.8.7.0
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
j3ffm1ll said:
So after many many attepts and failures I saw a post that said that the problem that I was running into was that I had reactivation lock on. I shut off reactivation lock and my phone rooted and allowed me to install a custom recovery without any issue. Hopefully this helps others who are having this same problem
Click to expand...
Click to collapse
That was it!! The reactivation lock option was checked.
Back to normal now, rooted, etc. Thanks!
https://youtu.be/1Vo_QFpSLhg
Glad you got rooted..
would this be the fix if i'm on OG1 update?
lifesgood88 said:
would this be the fix if i'm on OG1 update?
Click to expand...
Click to collapse
Just make sure that it is unchecked. Then you can flash a recovery with ODIN and then supersu if you want rooted stock.
can i change a recovery.img into a md5 file so i can flash it?
lifesgood88 said:
can i change a recovery.img into a md5 file so i can flash it?
Click to expand...
Click to collapse
Go here, https://www.androidfilehost.com/?w=files&flid=15340
Download either the first one on the page the KTsoonez TWRP or philz_touch_6.57.8-klte.tar. Turn off phone and reboot to download mode (power + home + vol down) . Open ODIN on the computer when the phone is in download mode. Connect phone to computer. ODIN should recognize it. Put recovery in PA slot and check auto reboot. Hit start and the recovery should flash in a few seconds. After it is finished, unplug phone and pull battery. turn on phone normally and let it boot. Download this file https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip and copy to phone SD. Turn off phone. Turn on phone to recovery power+vol up+home and Install Zip and select this file you just downloaded. Reboot. You are rooted.
So I'm trying to root my roommates S5 G900P/OG1 with Odin 3.10.7 and I cant disable the reactivation lock on it. It will let me put in his password then it goes back to the security page with the lock still on. Ive tried the factory reset workaround to no avail. Ive searched and searched. Does anyone have any ideas?
I accidentally used 5.0.2 root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
It does not show the "RECOVERY IS NOT SEANDROID ENFORCING" anymore but it still stuck at the samsung logo
I tried to flash it back to stock android but still get the "Sw rev check fail device 3 binary 2"
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
lummujaj said:
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
Click to expand...
Click to collapse
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
help pls got the same problem
nguye205 said:
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
Click to expand...
Click to collapse
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
BL
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
NotTheDroidsUrLooking4 said:
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
Click to expand...
Click to collapse
hi i have a s6 sm-g925i and not flash always same error sw rev check fail device 3 binary 2
sunnyce said:
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
Click to expand...
Click to collapse
Did you find a solution?! I have the exact same problem
nguye205 said:
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
Click to expand...
Click to collapse
Did you fix it?
I guess I'm fixing it now. I tried to flash 4-file firmware separately.
First: I downloaded and installed this TWRP zeroflte
BUT you can begin with -
Second: I flashed ONLY BOOTLOADER of this 4-file service firmware I9500XXUFNB3 (Unfortunatelly I cannot write down outside links of this file, because of I'm new user and system didn't allow me, but you can Google it and download from 4pda).
Third: I flashed ONLY AP
Fourth: I flashed CP (Modem)
Fifth: Last one CSC
FIRST START!...
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
ToY9CiTo said:
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
Click to expand...
Click to collapse
Hello did u get this fixed ?
i am facing the same issue
i d really appreciate if u update ur solution here
thanks
After installing twrp my phone is not showing IMEI and baseband. So sim card also not working. Using custom rom but still the same.
faurionutz said:
Flash back stock rom, if still no imei or baseband you must repair imei and baseband, contact me if you need this
Click to expand...
Click to collapse
Now stock rom also not working. I have tried to install many roms which used to work fine before installing twrp now they are giving error. I managed to install just 1 rom but Network and baseband is empty. I have no clue.
Can u sant me the bootloader pls? [email protected]
Help
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Can u plz send me the bootloader [email protected]
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
stonytony666 said:
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
Click to expand...
Click to collapse
Try this recovery mate
xfury94 said:
Try this recovery mate
Click to expand...
Click to collapse
this is what i get after trying your recovery:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hey,
I have a sm-n920t (tmobile note 5)
How it started: Was trying to load a new rom, kept telling me no OS installed.
The Error: Stuck at the samsung galaxy note 5 screen powered by android
What I tried (other than everything):
load up every firmware in obin 3.10.7, all of it downloads on the phone successfully, but still stuck on the same screen.
After I load up the firmware(s), I did the typical wipe data/factory reset, even cleared the cache, still nothing.
I tried every firmware: COj5, COKC, COI5
Goal: Just trying to get it to boot, I can't even get stock crap to work!
Here is obin results, which says successful:
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Have you tried emergency firmware loading through the Samsung smart switch computer program? Pretty simple, download it to your computer and plug your phone in to your computer run smart switch and it has instructions.
Also I've found some versions of Odin don't work on this phone. I don't have my computer where I'm at or I'd tell you which version that works for me.
Sent from my SM-N920T using XDA Free mobile app
tylerholbrook said:
Have you tried emergency firmware loading through the Samsung smart switch computer program? Pretty simple, download it to your computer and plug your phone in to your computer run smart switch and it has instructions.
Also I've found some versions of Odin don't work on this phone. I don't have my computer where I'm at or I'd tell you which version that works for me.
Sent from my SM-N920T using XDA Free mobile app
Click to expand...
Click to collapse
Yes I tried that and the phone doesn't pop up in the list.
techprint said:
Yes I tried that and the phone doesn't pop up in the list.
Click to expand...
Click to collapse
Have you tried to use Odin3. V3.09 with stock rom N920TUVU2COJ5? After Odin, try to factory wipe and reset the phone in recovery mode, the phone should boot up fine.
techprint said:
Hey,
I have a sm-n920t (tmobile note 5)
How it started: Was trying to load a new rom, kept telling me no OS installed.
The Error: Stuck at the samsung galaxy note 5 screen powered by android
What I tried (other than everything):
load up every firmware in obin 3.10.7, all of it downloads on the phone successfully, but still stuck on the same screen.
After I load up the firmware(s), I did the typical wipe data/factory reset, even cleared the cache, still nothing.
I tried every firmware: COj5, COKC, COI5
Goal: Just trying to get it to boot, I can't even get stock crap to work!
Here is obin results, which says successful:
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
When you go to recovery what's say. ..seems you don't have permission to boot stock firmwares with stock kernel. ..now go to flash a custom kernel with Odin and the device go OK. ..i have the same problem with my Canadian version sm-n920w8 ...
---------- Post added at 09:45 PM ---------- Previous post was at 09:43 PM ----------
ebusuhejbi said:
When you go to recovery what's say. ..seems you don't have permission to boot stock firmwares with stock kernel. ..now go to flash a custom kernel with Odin and the device go OK. ..i have the same problem with my Canadian version sm-n920w8 ...
Click to expand...
Click to collapse
go again to flash the firmware and after flash the custom kernel and i hope to work
Go with Odin 3.09 I always have success with it.
techprint said:
Hey,
I have a sm-n920t (tmobile note 5)
How it started: Was trying to load a new rom, kept telling me no OS installed.
The Error: Stuck at the samsung galaxy note 5 screen powered by android
What I tried (other than everything):
load up every firmware in obin 3.10.7, all of it downloads on the phone successfully, but still stuck on the same screen.
After I load up the firmware(s), I did the typical wipe data/factory reset, even cleared the cache, still nothing.
I tried every firmware: COj5, COKC, COI5
Goal: Just trying to get it to boot, I can't even get stock crap to work!
Here is obin results, which says successful:
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> cache.img
<ID:0/005> modem.bin
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Download Team Viewer ... And PM me your ID and Password ...
JUSMEJOSE said:
Download Team Viewer ... And PM me your ID and Password ...
Click to expand...
Click to collapse
I saw you were offering to user TV to help OP. Any way you could do the same for me? I have the same issued pretty much.
yugendreams said:
I saw you were offering to user TV to help OP. Any way you could do the same for me? I have the same issued pretty much.
Click to expand...
Click to collapse
Yeah PM me ....
Did you do a factory reset after you odin'ed? Make sure your usb drivers are good and your usb cable is also good.
Psyscope said:
Did you do a factory reset after you odin'ed? Make sure your usb drivers are good and your usb cable is also good.
Click to expand...
Click to collapse
I'm on the same boat here. I did factory reset, wipe cache after flashing odin (3.10.6). I also tried to repair the EFS folder using Octoplus box but the problem remains the same. It's just stuck on Samsung logo.
Any help will be appreciated.
Psyscope said:
Did you do a factory reset after you odin'ed? Make sure your usb drivers are good and your usb cable is also good.
Click to expand...
Click to collapse
+1 for the USB cable. I haven't had a problem on this phone, but back in the Vibrant days I ran into the exact same problem as you're having. Come to find out that something with the USB cable was making it so that everything wasn't getting copied correctly. Don't know how, but once I changed the USB cable, everything went smoothly. And if you're using the stock USB cable, with the reputation these cables have with failing, it wouldn't surprise me.
I had the same problem. Apparently the partition was corrupt. I used the PAC file from ere http://dl.samfirm.net/post/133865885867/full-note-5-n920t-n920tuvu2coj5tmb-511 or http://dl.samfirm.net/tagged/N920T, (the second link has a widr range of PAC files of which the newest you have to pay, but older files are free) which cleared up the issue. I don't know if it's free, my cost you a dollar or two, but in my case (I paid for the latest) it was worth it.
I hope you find a work-around.
Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....
no one?
Are you using the correct recovery file for J7?
Which recovery are you flashing ?
I suggest you flash the latest TWRP 3.0.2
https://dl.twrp.me/j7elte/twrp-3.0.2-0-j7elte.img.tar
Then it will reboot to the recovery after its done in odin and then flash supersu zip
Sent from my SM-A710F using Tapatalk
Also what actual model of the j7 are you using? That also makes a difference.
sent from this device on this app....
OriginalShinken1 said:
Also what actual model of the j7 are you using? That also makes a difference.
sent from this device on this app....
Click to expand...
Click to collapse
Samsung Galaxy J7 J700M, 16GB, Dual SIM LTE, Factory Unlocked (Black)
is the model, thanks
and yeah I will try that version of TWR thanks!
Did you enable the usb debugging in the developer option and oem unlock?
I suggest try searching it at the youtube for tutorial!
Sent from my SM-A710F using Tapatalk
I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me
tryer2 said:
I had the plan to give my GT-N8010 a new rom, I had an old stock Samsung ROM. So I succeeded to root my device bij flashing CF-Auto-Root by using Odin. Next I downloaded Twrp in the Googles Playstore and tried to install the right Twrp. And then......it gave a mistake. Since that time I can't start my device. I succeeded in coming in download mode and flashed Twrp. But the the device is now continiously starting en starting. The only thing I can do is coming in Downloadmode. Flashed Twrp with Odin. It indicates "passed" and no failure, but after that the device is continiously starting only with the startviews from samsung.
Please please, who can help me
Click to expand...
Click to collapse
after installing Twrp I get next message:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Flash stock rom via Odin .
I succeeded inrecovering my device bin flashing stock rom by Odin. Thank you JJEgan