I'm looking for the ability to contact certain people using prefxes such as international access numbers, pin numbers, suffex dialing for extensions, etc without having to edit each contact manually (i.e. entering commas for hard pauses and what not). If you manually edit contacts for automatic dialing sequences they lose their original formating and so you run into problems with caller ID and sms functionality. For example if you have an x number of contacts whose numbers begin with the same international access number it will get confused and think all the contact entries are the same.
A program like this could also support other dialing prefixes such as *67 for anonymous calling, (11) + 10-digit phone number for direct voicemail calling. It can also be used to setup automatic dialing sequences for those who need to access voice mails on other numbers, so no and so forth.
Up until now I have only been able to find one program that supports this for WM2003 (MyPrefixDial), but I don't think it works for WM5. There's only one prefix dialer called long distance dialer for WM5 but it's too basic of a program.
Anyone have plans or know of plans the development of a more complete program? I currently find that there are more applications for the Palm OS interface, which I find rather strange...any other ideas on the subject?
Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
Hey guys,
I just started using Treo 750. I love it so far except few things I miss about my old Nokia. Earlier I used to dial a calling card number and then just choose the contact's destination number by selecting "Touch Tone" option from the menu while in call, and it would touch tone that number for me and I was connected. Now, WM5 phone app doesnt seem to be able to do it, and I have to write down the contact's number on a paper first before dialing calling card access number.
Also, I know a comma can be used a 1-second soft pause, but any possible way to add hard pauses in the phone number like traditional cell phones can do... Its cumbersome carrying calling card's PIN code in pocket, and then entering it after dialing calling card number and then punching in destination number from a paper again... its frustrating...
I tried to look up a lot of dialers and apps, but none was a helpful find. Could someone suggest any way out.
anybody???
http://www.google.dk/search?source=...c&btnG=Google-søgning&meta=lr=lang_da|lang_en
I am using a product called MagiCall which has the calling card feature as well as calls filtering and SMS filtering.
I think it can help you.
I have a contract with my cellphone company that provides me besides normal cellphone service, unlimited calls to a group of people in my country, all people in that group are identified with an aditional short phone number, so we have two phone numbers in our SIM, the normal one and the short one.
Happens that we use the short number to call ourserlves in the group (we could also use the normal number, but that'd be charged in my invoice as a normal call), but the normal phone number is always shown in our phones as incoming number when receiving a call from the group or outside, and that's how it is saved in call log.
So, in my contacts list, each contact has the two numbers added (I've set the normal phone number as cell phone number, and the short number as work phone).
Now the problem, the way smartdialer in WinMo5 and later work is to show the last call (made/missed/received) of every contact, then contacts list (if contact not already shown before), and after receiving a call from the group in my case the normal number is shown, and there's no way to use the short number to reply, unless I take the long path and go to contacts list and choose the contact and number manually; usually I'm in a hurry and just forget and call the contact using smartdialing and happens that the normal number is dialed.
I had no problem using smardialing with WinMo2003 as there was an option to choose a default number when there were multiples numbers on a contact, so, no matter what number a contact used to call me, when using smartdialing the default number was always chosen, I see no equivalent in WinMo5 or later.
Now, is there a way to replicate that behavior from WinMo2003? (registry/patch/etc.), thanks for taking the time to read.
P.D. the same can be said when we have multiples numbers in a contact (work/home/etc.) and receive calls from some of them but just want to reply to just one of them.
I'm trying to set up my voicemail and although I was successful, I did run into a few problems.
1st problem: I tested my voicemail by calling my cellphone from a landline. I was able to leave a message and I was able to hear the message when I checked my voicemail. After listening to my message, I tap the star key and then I get a message on my P7P that says "Visual voicemail isn't working" and that I should "Call voicemail to finish setting it up". What is "visual voicemail?
Furthermore the P7P states, "Saved voicemails (0)---->" even though I did save my message. If I tap the ">" that's to the right of the "Saved voicemails..." I get a "Saved Voicemails" screen that says "You don't have any voicemail messages yet." I don't know why these messages are appearing. What should I do?
2nd problem: When I'm asked to enter my password I press the Keyboard symbol but I can't see the full number pad without fiddling around with it. It does eventually appear. How do I get rid of whatever keeps blocking the full number pad?
3rd problem: How do I get rid of the little dot indication that's at 1 o'clock on my phone app icon?
Skuddle said:
I'm trying to set up my voicemail and although I was successful, I did run into a few problems.
1st problem: I tested my voicemail by calling my cellphone from a landline. I was able to leave a message and I was able to hear the message when I checked my voicemail. After listening to my message, I tap the star key and then I get a message on my P7P that says "Visual voicemail isn't working" and that I should "Call voicemail to finish setting it up". What is "visual voicemail?
Furthermore the P7P states, "Saved voicemails (0)---->" even though I did save my message. If I tap the ">" that's to the right of the "Saved voicemails..." I get a "Saved Voicemails" screen that says "You don't have any voicemail messages yet." I don't know why these messages are appearing. What should I do?
2nd problem: When I'm asked to enter my password I press the Keyboard symbol but I can't see the full number pad without fiddling around with it. It does eventually appear. How do I get rid of whatever keeps blocking the full number pad?
3rd problem: How do I get rid of the little dot indication that's at 1 o'clock on my phone app icon?
Click to expand...
Click to collapse
Voice mail is carrier-related, not device-related. So the first question is, who is your carrier?
Second, I find it hard to believe there are people who don't know what Visual Voicemail is. That is an app that is set up through your carrier that transcribes your voice mails into text and is accessible in your dialer or the VM app itself so you don't have to call your VM, you read and manage it through the app
Here's what I do for easy access to voicemail...been doing it for years.
I create a new contact and name it AaaaVoicemail. All the A's make sure it stays at the top of the alphabetical list.
Then for the phone number I use the default voicemail number supplied by your carrier followed by TWO commas and the 4 digit passcode with NO SPACES and ending with the #.
Here is a generic non-functional example of what it looks like: 18056377356,,9999#
The commas are for a short delay between the phone number and the passcode.
One comma may be enough but I find that 2 commas works best.
Then all you have to do is call this "new" contact and it inputs your passcode for you automatically.
Or you can just bring up the phone dialer and hold the 1.
PS. If you are managing your cellphone voicemail from a landline or another phone. Michael Jordan will tell you, "Stop it, Get some help"
@jaseman-
When I tried to edit my voicemail number I ran into more problems. Here's what I did:
I tapped my voicemail number and on the resulting screen I tapped the Edit icon at the top right of the screen. That brought up the contact info edit screen with the voicemail number.
I tapped the number. The cursor appeared at the end of it and the keypad appeared below it. But there was no comma on the keypad that I could tap, so I couldn't add the commas and my password (which, by the way, has to be 7 digits on my P7P).
How do I then add the 2 commas if they're not on the keypad???
HipKat said:
Voice mail is carrier-related, not device-related. So the first question is, who is your carrier?
Second, I find it hard to believe there are people who don't know what Visual Voicemail is.
Click to expand...
Click to collapse
My carrier is Consumer Cellular.
I thought Visual Voicemail was what one used if one wanted to send a live, moving message. I didn't think that "visual" meant the voicemail would be translated into text, since the P7P has a voice-to-text option already installed.
schmeggy929 said:
If you are managing your cellphone voicemail from a landline or another phone. Michael Jordan will tell you, "Stop it, Get some help"
Click to expand...
Click to collapse
No, I'm managing it from my P7P.
Skuddle said:
@jaseman-
When I tried to edit my voicemail number I ran into more problems. Here's what I did:
I tapped my voicemail number and on the resulting screen I tapped the Edit icon at the top right of the screen. That brought up the contact info edit screen with the voicemail number.
I tapped the number. The cursor appeared at the end of it and the keypad appeared below it. But there was no comma on the keypad that I could tap, so I couldn't add the commas and my password (which, by the way, has to be 7 digits on my P7P).
How do I then add the 2 commas if they're not on the keypad???
Click to expand...
Click to collapse
Without editing the actual voicemail number, just follow the guys instructions - [note down or copy the original voicemail number] create a new contact and use the name 'AaVoicemail' (Aa so that the number is always at the top of your contacts list). Then enter the voicemail number followed by 2 commas and your pin/password. If you still don't have the comma option, try using Truephone Dialer and Contacts... See screenshot, it has comma option. OR, using the full keyboard in any text environment (so that commas are available) type out the number, commas and pin as you want it, then select and copy that text. Then create the new contact as described by previous guy or above and when it comes to entering the number just paste in the text you copied.
Don't think there's any other way to explain in more plain terms with every step...
HipKat said:
Voice mail is carrier-related, not device-related. So the first question is, who is your carrier?
Second, I find it hard to believe there are people who don't know what Visual Voicemail is. That is an app that is set up through your carrier that transcribes your voice mails into text and is accessible in your dialer or the VM app itself so you don't have to call your VM, you read and manage it through the app
Click to expand...
Click to collapse
Well you live and learn, I've never heard of it lol
@reg66
But I can only see the bottom part of the keypad and I cannot find any way to get rid of the text that's covering the top part. Please see Problem #2. Any ideas?
HipKat said:
Voice mail is carrier-related, not device-related. So the first question is, who is your carrier?
Second, I find it hard to believe there are people who don't know what Visual Voicemail is. That is an app that is set up through your carrier that transcribes your voice mails into text and is accessible in your dialer or the VM app itself so you don't have to call your VM, you read and manage it through the app
Click to expand...
Click to collapse
I would argue the complete opposite. 4 providers in total offer it here in the UK, 3 MNOs and 1 MVNO. That's it.
ExperiencersInternational said:
I would argue the complete opposite. 4 providers in total offer it here in the UK, 3 MNOs and 1 MVNO. That's it.
Click to expand...
Click to collapse
Sure, a lot of it depends on your locality and carrier.
But, it's been around going on 20+ years now, and it is (or was, I suppose) a VERY highly requested feature, for quite some time. Many carriers in the US, or perhaps a couple, wouldn't provide the service, not for a techncal reason, but mostly because you weren't buying a phone from them.
I suspect the same is the case in the UK, to some extent?