hi forum
i try root with version zv7 but not work, will have any idea?
thanks
josephmediina said:
hi forum
i try root with version zv7 but not work, will have any idea?
thanks
Click to expand...
Click to collapse
Did you try to flash the rootedsystem.img ???
When I received my flex I updated all the way to ZV7 and rooted that way.
Tonight I will test ZV8.
can you tell me what is the procedure or where is the tutorial? please
thanks
I am also having the same problem
Dude android development forum has a turorial named root ls997zv6&7 you just gotta look for it....
I 've been looking for a ZV8 Root as well. Been looking for months. Any assistance would be greatly appreciated.
Franglestine said:
I 've been looking for a ZV8 Root as well. Been looking for months. Any assistance would be greatly appreciated.
Click to expand...
Click to collapse
SEARCH the forums... its there
I uploaded stock IMG and it has been rooted by @Sj12345 and @randrew87
UGH
Alex_XV6700 said:
SEARCH the forums... its there
I uploaded stock IMG and it has been rooted by @Sj12345 and @randrew87
Click to expand...
Click to collapse
I definatly have. Dude I have the Stagefright update. There's no roots for it yet. I've been looking daily and tried several suggestions. If you want to upload a zv8 ROM please do and link it. But I've looked plenty. Those ZV7/ZV6 roots don't work.
ZV7 and ZV6 are directly for each version. Not for ZV8.
And could you please enlighten me which methods have you tried @Franglestine cause just to make sure I just rooted my ZV8 LS996 Stagefright patched Flex2.
BTW @randrew87 @Sj12345 sorry I took this long but root works flawlessly.
Alex_XV6700 said:
ZV7 and ZV6 are directly for each version. Not for ZV8.
And could you please enlighten me which methods have you tried @Franglestine cause just to make sure I just rooted my ZV8 LS996 Stagefright patched Flex2.
BTW @randrew87 @Sj12345 sorry I took this long but root works flawlessly.
Click to expand...
Click to collapse
its ok , just tested yesterday too works like a charm!
Can you guys post a link to your steps for zv8
Again with this... SEARCH THE FORUMS. its there.
zvoo
Alex_XV6700 said:
ZV7 and ZV6 are directly for each version. Not for ZV8.
And could you please enlighten me which methods have you tried @Franglestine cause just to make sure I just rooted my ZV8 LS996 Stagefright patched Flex2.
BTW @randrew87 @Sj12345 sorry I took this long but root works flawlessly.
Click to expand...
Click to collapse
link me to how u rooted your zv8 please
its here in the forums look for it @ItsJetz7s
go to development forums....
Alex_XV6700 said:
its here in the forums look for it @ItsJetz7s
go to development forums....
Click to expand...
Click to collapse
i triwd rooting my phone for the first time and i had to pull out unplug the wire on my battery,inside,of,my LG G Flex 2 and i plugged,it back in. Ttiee turning it on and it wouldnt so i plugged it,into my pc and,went to device manager to,make,sure it detected my phone and i tried turning it on, boom it turned on. But when it was booted up it aaod i had no service, this was 2-3 days ago and since then i randomly get a little service but the majority of the time it says i have no service. After that btw i re tried rooting it instead of pulling the wire on the battery i typed "LEAVE" in the cmd prompt and it rebooted i had root checked it and everything, but still had no service please help. Its my only phone and i need the service
Related
Has anyone been successful with this?
I am trying the guide posted in the general thread.. it worked while my phone had the f510s firmware
but after flashing h959 10d it does not work at all.. I get up to step 11 (where you have to enter the sh command) and nothing happens.
I've tried it a few times, sometimes the cursor will just blink
other times, it will return to the # immediately
a couple of times i got the word 'EXEC' and some garbage text.
I've done some research and all I could find is other people complaining about the same problem, but no solutions.
Does anyone have any suggestions?
hbcdfpq said:
Does anyone have any suggestions?
Click to expand...
Click to collapse
Umm Root appears to only work for V10c and Earlier firmwares...I had to roll back to V10c to root again. Dont know if this helps. :silly:
Waynato said:
Umm Root appears to only work for V10c and Earlier firmwares...I had to roll back to V10c to root again. Dont know if this helps. :silly:
Click to expand...
Click to collapse
Yes I am using 10c now and the root is fine.
I was previously able to root v10i on the korean firmware
I really regret flashing the 959 firmware now as they already have 5.1.1
Just received the ZV9 update,
LS996ZV9 11/20/2015
Sprint Global Roaming
Minor UI Updates
App Updates
Bug Fixes
Has anyone rooted this yet? if so, how?
sfate2009 said:
Just received the ZV9 update,
LS996ZV9 11/20/2015
Sprint Global Roaming
Minor UI Updates
App Updates
Bug Fixes
Has anyone rooted this yet? if so, how?
Click to expand...
Click to collapse
I highly doubt it....since it so new...i would wait b4 updating sometimes....."Bugs Fixes" usually mines root/security exploits patched...meaning they found a new way of blocking root...making it that much harder to root
bountyman334 said:
I highly doubt it....since it so new...i would wait b4 updating sometimes....."Bugs Fixes" usually mines root/security exploits patched...meaning they found a new way of blocking root...making it that much harder to root
Click to expand...
Click to collapse
Normally i wouldnt have taken it, but a failed root attempt broke my download mode, this fixed it, I know there was a rootedsystem.img floating around somewhere. I heard it worked for zv7 on through, but cant find it anymore.
sfate2009 said:
Normally i wouldnt have taken it, but a failed root attempt broke my download mode, this fixed it, I know there was a rootedsystem.img floating around somewhere. I heard it worked for zv7 on through, but cant find it anymore.
Click to expand...
Click to collapse
be careful of thatas well...i tried to downgrade after not reading whatwill happened and i ended up bricked and had to send to LG repair
So basically, word of the wise is to wait, I have the zv9 unrooted, anyone you would suggest i make a dump and send to?
Links updated on my "Back to stock" forum on General.
Have uploaded all the system imgs since zv6 on my gdrive if anyone needs them.
And have EMMC backups too from zv7 and zv8. (Soon for ZV9)
Alex_XV6700 said:
Links updated on my "Back to stock" forum on General.
Have uploaded all the system imgs since zv6 on my gdrive if anyone needs them.
And have EMMC backups too from zv7 and zv8. (Soon for ZV9)
Click to expand...
Click to collapse
I have zv9 system image if you want it. just need to upload it
donaldmull said:
I have zv9 system image if you want it. just need to upload it
Click to expand...
Click to collapse
I have stock system images since ZV6 to ZV9. And ZV9 has already been rooted by @randrew87.
Is there a way to unroot ZV9 and be back to stock like nothing happened?
It's not any different than the other build versions. The stock image is on the forum.
sfate2009 said:
It's not any different than the other build versions. The stock image is on the forum.
Click to expand...
Click to collapse
I know how to install tot files, but not factory system images. Is there a guide?
donaldmull said:
I know how to install tot files, but not factory system images. Is there a guide?
Click to expand...
Click to collapse
The guide is in development forum there you can find step by step guide on how to root your device.
In General section there´s another forum by me RETURN TO STOCK.
Alex_XV6700 said:
The guide is in development forum there you can find step by step guide on how to root your device.
In General section there´s another forum by me RETURN TO STOCK.
Click to expand...
Click to collapse
Are you saying the rootedsystem.img can be applied to ZV9? The "[ROOT] LG G FLEX 2 ..." thread hasn't been updated to include this ver so I'm skeptical. Would love to hear from those who've had some success since I'm still evaluating whether I want to keep this thing or not. The sprint bloatware installed upon activation is almost too much to bare.
hallucinate said:
Are you saying the rootedsystem.img can be applied to ZV9? The "[ROOT] LG G FLEX 2 ..." thread hasn't been updated to include this ver so I'm skeptical. Would love to hear from those who've had some success since I'm still evaluating whether I want to keep this thing or not. The sprint bloatware installed upon activation is almost too much to bare.
Click to expand...
Click to collapse
There is a ZV9 rootedsystem.img and its there if you look for it.
I was talking about getting back to stock (I made a thread where there's all the sys images from ZV6 to ZV9 pure stock).
And yes the image is there. I'm already on ZV9 rooted. Apply the fixes from itson and lab network and bloatware wont bother you at all.
K, I found it, be great if it added to the OP but w/e thanks for letting me know it was somewhere - in this post:http://forum.xda-developers.com/showpost.php?p=64087953&postcount=378. Working great! Next I'll try to track down those "itson and lab network" fixes you suggested.
hallucinate said:
K, I found it, be great if it added to the OP but w/e thanks for letting me know it was somewhere - in this post:http://forum.xda-developers.com/showpost.php?p=64087953&postcount=378. Working great! Next I'll try to track down those "itson and lab network" fixes you suggested.
Click to expand...
Click to collapse
Im looking for those "itson and lab network" fixes as well.
I have posted those fixes in several forums :good:
EDIT: Looks like its not MM but some security update, so that sucks but I'd still like to know if anyone successfully got back to stock from rooted 5.1.1
Hi everyone.
I'm trying to find a way to restore my H950 to stock and completely remove any trace of root so that I can install an OTA update. I have tried installing the update with LG PC Suite and LGMobile Support Tool. Both of them say that I am on the latest software (5.1.1 H950v11?). It has been so long since I rooted it that I can't remember what method I used. If anyone has any idea how to flash it back to stock, I'd appreciate the help!
More Details:
I have an H950 (US AT&T) rooted on 5.1.1 and I just started getting an update yesterday saying that I have a system update available. When I tried to download and update, the phone I got an error while the update was still at 0%. When the phone restarted I got the "This phone is suspected in rooting..." Error.
I have tried following this thread [Guide] LG G Flex 2 Stock Firmware (Go Back to Stock) KDZ & TOT Method
but it didn't work. I got the flash utility to run but I still had SuperSU after it flashed my phone and the update still failed due to "Suspect in rooting."
I also tried following this thread [Tool] Easy Restore/Unroot Tool for LG G Flex 2 [09/15/15]!!
but I could not get it to work. The utility just hangs at "Working..."
Anyone successfully used either of these methods on an H950 with 5.1.1 to get back to stock?
Thanks in advance!
2nd method
timishue said:
EDIT: Looks like its not MM but some security update, so that sucks but I'd still like to know if anyone successfully got back to stock from rooted 5.1.1
Hi everyone.
I'm trying to find a way to restore my H950 to stock and completely remove any trace of root so that I can install an OTA update. I have tried installing the update with LG PC Suite and LGMobile Support Tool. Both of them say that I am on the latest software (5.1.1 H950v11?). It has been so long since I rooted it that I can't remember what method I used. If anyone has any idea how to flash it back to stock, I'd appreciate the help!
More Details:
I have an H950 (US AT&T) rooted on 5.1.1 and I just started getting an update yesterday saying that I have a system update available. When I tried to download and update, the phone I got an error while the update was still at 0%. When the phone restarted I got the "This phone is suspected in rooting..." Error.
I have tried following this thread [Guide] LG G Flex 2 Stock Firmware (Go Back to Stock) KDZ & TOT Method
but it didn't work. I got the flash utility to run but I still had SuperSU after it flashed my phone and the update still failed due to "Suspect in rooting."
I also tried following this thread [Tool] Easy Restore/Unroot Tool for LG G Flex 2 [09/15/15]!!
but I could not get it to work. The utility just hangs at "Working..."
Anyone successfully used either of these methods on an H950 with 5.1.1 to get back to stock?
Thanks in advance!
Click to expand...
Click to collapse
i've had success by 2nd method (stock system.img) when i flashed chinese v11z tot.
did u enabled usb debugging option?
also permitted adb access on your computer?
that window show up for a very first few seconds when your computer tries to get adb permission.
all of them fails... tell me i have v12d tot file
sjc0211 said:
i've had success by 2nd method (stock system.img) when i flashed chinese v11z tot.
did u enabled usb debugging option?
also permitted adb access on your computer?
that window show up for a very first few seconds when your computer tries to get adb permission.
all of them fails... tell me i have v12d tot file
Click to expand...
Click to collapse
Could you please upload v12d tot?
It will be very helpful.
Thanks
I cannot upload that on public because of network traffic
fyter said:
Could you please upload v12d tot?
It will be very helpful.
Thanks
Click to expand...
Click to collapse
Instead, give me private message
timishue said:
EDIT: Looks like its not MM but some security update, so that sucks but I'd still like to know if anyone successfully got back to stock from rooted 5.1.1
Hi everyone.
I'm trying to find a way to restore my H950 to stock and completely remove any trace of root so that I can install an OTA update. I have tried installing the update with LG PC Suite and LGMobile Support Tool. Both of them say that I am on the latest software (5.1.1 H950v11?). It has been so long since I rooted it that I can't remember what method I used. If anyone has any idea how to flash it back to stock, I'd appreciate the help!
More Details:
I have an H950 (US AT&T) rooted on 5.1.1 and I just started getting an update yesterday saying that I have a system update available. When I tried to download and update, the phone I got an error while the update was still at 0%. When the phone restarted I got the "This phone is suspected in rooting..." Error.
I have tried following this thread [Guide] LG G Flex 2 Stock Firmware (Go Back to Stock) KDZ & TOT Method
but it didn't work. I got the flash utility to run but I still had SuperSU after it flashed my phone and the update still failed due to "Suspect in rooting."
I also tried following this thread [Tool] Easy Restore/Unroot Tool for LG G Flex 2 [09/15/15]!!
but I could not get it to work. The utility just hangs at "Working..."
Anyone successfully used either of these methods on an H950 with 5.1.1 to get back to stock?
Thanks in advance!
Click to expand...
Click to collapse
You chose cse flash and wiped correct? If you didn't that's why my guide removes everything 100% if you follow it correctly.
Sent from my iPhone using Tapatalk
CSE flash? Sorry I didn't see that in your guide for the H950 on the AT&T network. I'm looking at your guide and not seeing the CSE Flash unless the LG Tool is the CSE FLash? I had the same problem with SuperSU left over and not able to update. I tried the default Upgrade method, then got a minios OS screen on the the Board method.
hyelton said:
You chose cse flash and wiped correct? If you didn't that's why my guide removes everything 100% if you follow it correctly.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
It's entirely possible that I am technologically inept, but I am having the exact same issue as the OP. I followed your guide (which was very helpful) for the TOT method, and there is no option to use CSE flash, or at least it's not discussed in the instructions.
I flashed my phone twice using your TOT guide -- pretty sure I followed it to the letter. It completed successfully, but when the phone rebooted, I still had root access. I'm not sure how to unroot this thing so I can receive OTA updates (and maybe sell later on down the road).
Thanks for the help!
---------- Post added at 04:29 PM ---------- Previous post was at 03:41 PM ----------
Umm, so I found a possible solution on another thread in this forum. Maybe the answer was so simple that nobody thought to mention it. But apparently, you can just remove root access within the SuperUser app; just select "Full Unroot" or "Total Unroot" from settings. Then run this TOT flash, and you should be GTG. I am trying this now and will report as to whether I am successful.
jwhite326 said:
It's entirely possible that I am technologically inept, but I am having the exact same issue as the OP. I followed your guide (which was very helpful) for the TOT method, and there is no option to use CSE flash, or at least it's not discussed in the instructions.
I flashed my phone twice using your TOT guide -- pretty sure I followed it to the letter. It completed successfully, but when the phone rebooted, I still had root access. I'm not sure how to unroot this thing so I can receive OTA updates (and maybe sell later on down the road).
Thanks for the help!
---------- Post added at 04:29 PM ---------- Previous post was at 03:41 PM ----------
Umm, so I found a possible solution on another thread in this forum. Maybe the answer was so simple that nobody thought to mention it. But apparently, you can just remove root access within the SuperUser app; just select "Full Unroot" or "Total Unroot" from settings. Then run this TOT flash, and you should be GTG. I am trying this now and will report as to whether I am successful.
Click to expand...
Click to collapse
Rooted or not you should be able to go back to stock. And CSE flash is for the kdz method of lg flash tool. Which I didn't realize what model they were needing help with. Also with the H950 LGUP should be used instead of normal flash tool to avoid any issues with the flash tool.
Sent from my iPhone using Tapatalk
hyelton said:
Rooted or not you should be able to go back to stock. And CSE flash is for the kdz method of lg flash tool. Which I didn't realize what model they were needing help with. Also with the H950 LGUP should be used instead of normal flash tool to avoid any issues with the flash tool.
Click to expand...
Click to collapse
Hmm. Thanks for helping us out. So I am kind of confused. I reinstalled the Tot file using LGUP, and it completed successfully. I selected "REFURB" mode, and it completed successfully. But after it finished, my phone is still rooted. (I verified with root checker.) I just want to go back to stock so I can get OTA updates (and MM hopefully, when/if AT&T releases it). Now my phone won't get OTA updates because it says it's "suspected of rooting." I bought the phone used off of Swappa, so I'm not sure how exactly the original owner rooted it.
jwhite326 said:
Hmm. Thanks for helping us out. So I am kind of confused. I reinstalled the Tot file using LGUP, and it completed successfully. I selected "REFURB" mode, and it completed successfully. But after it finished, my phone is still rooted. (I verified with root checker.) I just want to go back to stock so I can get OTA updates (and MM hopefully, when/if AT&T releases it). Now my phone won't get OTA updates because it says it's "suspected of rooting." I bought the phone used off of Swappa, so I'm not sure how exactly the original owner rooted it.
Click to expand...
Click to collapse
At this point you'd be better off waiting for a KDZ of MM when it comes out for the H950. (But remember, root will probably never be achieved for our devices on MM, if that's something you care about).
I remember buying TWO H950s. Both needed the OTA for the latest Lollipop. But despite several hours, several methods, and several hours at the ATT store, I was never able to get OTAs working on either of them. It was impossible.
And supposedly impossible for several other users on XDA, who couldn't get OTAs working for their ATT Flex 2's. So even if you manage to unroot, don't get your hopes high believing OTAs will work.
Did somebody ever able to go back to stock (H950) from rooted 5.1.1? Where did you get the TOT file?
trudeo said:
Did somebody ever able to go back to stock (H950) from rooted 5.1.1? Where did you get the TOT file?
Click to expand...
Click to collapse
i think it is only for sale.
tswtech2 said:
i think it is only for sale.
Click to expand...
Click to collapse
It's not for sell.. it's on my server and it's free. Along with h it being in my back to stock thread.
Sent from my iPhone using Tapatalk
hyelton said:
It's not for sell.. it's on my server and it's free. Along with h it being in my back to stock thread.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
oh ok . i apologize for the confusion
tswtech2 said:
oh ok . i apologize for the confusion
Click to expand...
Click to collapse
No problem. I think I've had it since March
Sent from my iPhone using Tapatalk
tswtech2 said:
oh ok . i apologize for the confusion
Click to expand...
Click to collapse
is it the v12d tot?
tswtech2 said:
is it the v12d tot?
Click to expand...
Click to collapse
11z. 12d is non existent or if it is available it's being sold for a crazy price.
Sent from my iPhone using Tapatalk
hyelton said:
11z. 12d is non existent or if it is available it's being sold for a crazy price.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
yeah that's why i was saying it was for sale. i had you confused with this jinior member that says they have it but they aren't posting it.
tswtech2 said:
yeah that's why i was saying it was for sale. i had you confused with this jinior member that says they have it but they aren't posting it.
Click to expand...
Click to collapse
If any member is trying to sell it on the forums report them. That's not allowed and looked down upon here. I pubically post everything I have and can get for everyone
Sent from my iPhone using Tapatalk
tswtech2 said:
yeah that's why i was saying it was for sale. i had you confused with this jinior member that says they have it but they aren't posting it.
Click to expand...
Click to collapse
i flashed this v11 firmware to a [hone that had 12d and now it shows authenticate error #9. so i was looking for 12d firmware
---------- Post added at 02:16 PM ---------- Previous post was at 02:07 PM ----------
tswtech2 said:
i flashed this v11 firmware to a [hone that had 12d and now it shows authenticate error #9. so i was looking for 12d firmware
Click to expand...
Click to collapse
and now when i connect to lg support tool it says i have the latest firmware eventhough it has v11 not, v12d.
As promised,
here above you have some TOTs just created and only for Development use
This image files are been created in Stock bootloader locked mode, but should be the same as unlocked mode for sure.
V 10d TOTs
Stock FULL TOT -----> LINK
Stock System and boot partitions TOT -----> LINK
Stock only Recovery TOT -----> LINK
Stock only Boot Partitions TOT -----> LINK
Sick! Do these flash correctly though? Have you tested on your device?
Honestly Annoying said:
Sick! Do these flash correctly though? Have you tested on your device?
Click to expand...
Click to collapse
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing
wolfgart said:
Still not Bro.
Waiting @tungkick to have a way to always go back, but i'm pretty sure if you flash only recovery TOT for example, you don't have any risk of brick nothing
Click to expand...
Click to collapse
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono
Honestly Annoying said:
Alright, I am going to attempt to make a TOT with TWRP. Just need the TWRP file from @jcadduono
Click to expand...
Click to collapse
He already posted it on his website a few pages back. Check it out
arjuna_ said:
He already posted it on his website a few pages back. Check it out
Click to expand...
Click to collapse
Oh damn, I'll check that out! Totally missed that, my bad
Wait. Is there a TWRP for the T-Mobile V20??...
stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
There is a twrp recovery.img, but it's not yet flashable.
What is @tungkick website where I can find all of this stuff? Looking forward to flashing everything in the near future.
stanleyopar2000 said:
Wait. Is there a TWRP for the T-Mobile V20??...
Click to expand...
Click to collapse
Yes, there seems to be one already, but as far as i know it is not flashable yet.
Look on this thread:
http://forum.xda-developers.com/v20...-stock-tot-t3484982/post69308906#post69308906
I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks
bud951 said:
I have a bricked v20 and I have tried flashing this .tot and the other posted in this forum and I keep getting error messages at 9% on all attempts on two windows machines. Any ideas on what this issue could be? I am using LGUP version 1_14_3. Is this the latest build or the build compatible with the V20? Drivers were latest I could find also using the LG common.dll which I needed for LGUP to recognize the V20. This is my only way out of brick I think. Any suggestions would be greatly appreciated. Thanks
Click to expand...
Click to collapse
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.
frostmore said:
mate, as of today, i have read that there is no dll file for the v20. i.e there is no updated dll file to recognise the v20 in lgup.
u might want to wait a bit longer before u can unbrick your phone.
Click to expand...
Click to collapse
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
I don't think the flash tool is meant to be public, so they are probably leaked files.
I have a soft bricked LG V20 and have tried the LGUP DLL for every LG phone model I could find. The most progress I got was with the LG G5 dll and it only went to 10%.
bud951 said:
Not good news.. it is just the dll? I mean i knew it had to be a missing piece because it was ready to flash. Every file failed at the same time. If anyone hears anything please post here or PM me just for a heads up. Im sure a few other desperate souls out there are anxiously waiting. Any reason the flash tools are incomplete? It doesnt seem like a big deal. Can someone here in the forum make one? Just couious.. i would gladly donate. Thanks for the info.
Click to expand...
Click to collapse
not really sure as i am new to LG.
been reading up on xda relating to flashing and rooting (i came from samdung phones) this baby. i think being patient here is what you can do at the moment.also, not only the dll file is missing, i read twrp is not saving backup properly due to the new security protocols in place android 7.0.
take heart mate,i know it sucks to have a bricked phone.
all im getting is "Unknown Model"
Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.
Perion said:
Managed to soft brick my H918 as well, so if anyone working on this needs a tester, I'd love to get my phone back.
Click to expand...
Click to collapse
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk
alane708 said:
Check here
http://forum.xda-developers.com/v20/development/h918-stock-deodex-debloat-t3499423/page13
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I appreciate it, wish I'd seen that the day before. I tried to go back to stock recovery to see if that would fix my boot loop issue, so, without access to TWRP, I'm hosed until we have a method to reflash recovery from Fastboot or Update modem connection..
I am screwed as well, I messed my phone up too, and when I turn my phone on it automatically goes the to the upgrade mode screen, I want to through away this damn phone, hehehe.
I have both the h901 and h900. I updated my 901 to Nougat, and in the same thread the Dev says it is possible to use on the 900. Anyone tried this or willing to try?? My wife uses the h900, sooooo, if I screw that up I'm sleeping on the couch..
https://forum.xda-developers.com/showthread.php?t=3638750
Sent from my LG-H901 using XDA-Developers Legacy app
Hi
I tried to use it, but I am unable to boot into any recovery and if I try "and reboot boot loader" the h900 just reboots back into MM.
I am currently on H90021w.
Sent from my LG-H901 using Tapatalk
The instructions say to cd into directory /dev/block/bootdevice/... but you need to be root to cd into this directory.
Just for grins I tried to do some adb commands on mine, after adb reboot, I got the android with a red triangle and from that point couldn't issue adb commands..
Sent from my LG-H901 using XDA-Developers Legacy app
bobbylx said:
I have both the h901 and h900. I updated my 901 to Nougat, and in the same thread the Dev says it is possible to use on the 900. Anyone tried this or willing to try?? My wife uses the h900, sooooo, if I screw that up I'm sleeping on the couch..
https://forum.xda-developers.com/showthread.php?t=3638750
Click to expand...
Click to collapse
My ATT H900 is still on lollipop and is rooted. Do you think this would work on my phone and if so, what steps do you think I should follow?
TayzGpa said:
My ATT H900 is still on lollipop and is rooted. Do you think this would work on my phone and if so, what steps do you think I should follow?
Click to expand...
Click to collapse
I can't really say. My H900 was rooted and on LP, but I upgraded it back in January. Now when I try to do anything with ADB, nothing works and my PC doesn't even recognize it. My plan was to follow the Dev's directions, only pushing system.img and boot.img.
I may try again later
Waiting for good news... ?
TayzGpa said:
My ATT H900 is still on lollipop and is rooted. Do you think this would work on my phone and if so, what steps do you think I should follow?
Click to expand...
Click to collapse
You may want to send a message to the Dev over in the H901 section. Here is what he told me just today. Sounds like you are at the right point according to him.
Quote:
Originally Posted by runningnak3d
@bobbylx @Stransky To use this on an H900 you have to already be rooted. It is my understanding that only people that had orignal LP have root? Dirtycow doesn't work on MM on H900? That doesn't make sense. Where does the dirtycow root procedure fail on the H900?
Stransky said:
Hi
I tried to use it, but I am unable to boot into any recovery and if I try "and reboot boot loader" the h900 just reboots back into MM.
I am currently on H90021w.
Click to expand...
Click to collapse
I have the same phone h900 with same mm firmware but i have a bit of a problem i cant open security and fingerprints section in settings ...