Database Info

[Completed] [HELP] bootloop after format system in CWM

my device is EVERCOSS AT1A
i got bootloop after go to advanced menu on CWM and choose format system
i still can enter device logo when turn my phone on
but i cant enter recovery mode
bateray non-removable
the tablet can connect to pc but it show as unknow device so i cant instal driver so i cant flash it
help me.... thank you

XDA Visitor said:
my device is EVERCOSS AT1A
i got bootloop after go to advanced menu on CWM and choose format system
i still can enter device logo when turn my phone on
but i cant enter recovery mode
bateray non-removable
the tablet can connect to pc but it show as unknow device so i cant instal driver so i cant flash it
help me.... thank you
Click to expand...
Click to collapse
Sounds like a hard brick.
If neither recovery mode nor flash/download mode works, you can't do much yourself.
Check this thread about CWM on a similar device: [ROOT] [GUIDE] [CWM] For Evercoss A7A MTK 6572 100% Working Root Guide.
Maybe you find a way to get your tablet recognized on a PC so that you can flash back a working recovery/firmware.
If you are registered xda, you can also post in the Android Q&A, Help & Troubleshooting forum.
Good luck !

Thread closed. Thank you.

[Completed] Help motorola moto g 2014 xt1068

im pretty much doomed
i use a motorola moto g 2nd gen 2014 version
recovery TWRP-2.7.1.1
till now i was using the titan prime rom for xt1068 - lollipop
yesterday i tried to flash the cyanogenmod 12.1 nightly titan
i have flashed 3-4 roms before and am not new to the process, i've been using a rooted device for almost an year
yesterday i copied the rom to my external sd card , took backups using titanium backup,did the standard wiping procedures and proceeded to flash the rom. when i tried to flash the rom
it gave me an error E:/ error executing updater binary in zip ' /sdcard1/cyanogenmod12.1 nightly.zip'
at first i thought there was a problem with my rom, so i took out my external sd , put my titan prime rom's zip on it and then did the standard wiping procedures again and tried to flash it
only to get the same error again
now i dont have any os on my device.
when i try to mount the storage on my laptop using the twrp / mount usb storage my laptop doesn't read the device at all.
it doesnt read the device when it is connected through usb cable and the recovery mode is on
however it does read it till it is in the bootloader state as - fastboot titan
as soon as i turn on the recovery it doesnt read
at first i thought it's because i had the rom on my external sd so i searched the internet on how to copy the rom to my internal memory that is 16GB
i got many methods using adb so i installed adb copied it ito c:/adb. then i tried using the adb commands to copy the files
in this tutorial the device is detected while in the recovery mode but mine doesnt get detected. i have installed the proper drivers , motorola device manager etc but nothing seems to work. i need help ASAP

Hi there,
All you need is in this threads:
G 2014 General -> [INDEX] Start here....
[WINDOWS TOOL][ROM][Lollipop][5.0.2][XT1068] Stock Android 5.0.2 Easy Installer
For more questions please use this forum : G 2014 Q&A, Help & Troubleshooting
Good luck

[Completed] Need help on Flashing Xperia SP C5302. Its gone dead while flashing.

I'm using Xperia SP from 3 years. Recently, I was about to flash CM12.1 Lollipop ROM.
I did these things seqentially as below -
1. I rooted the phone via Towelroot app.
2. Backup DRM keys with Bakup_TA_Master.
3. Then, Unlocked the Bootloader via Fastboot cmd. (link : http://forum.xda-developers.com/showthread.php?t=2354721 )
4. After that I flashed CWM v6.0.3.5 & created full Backup.
5. Wiped Chahe, Dalvik Chahe, Data & System.
6. Tried to Flash CM 12.1 ROM (downladed from LINK: https://github.com/CyanogenMod/android_device_sony_huashan )
BUT soon after a few minutes of installalation my device showed an error message and it shut down and doesn't started.
It don't shows bootloader, no SONY logo, not reboots to CWM Recovery. It is almost dead, But.....
The only two things it allows me to do is boot to Fastboot Mode & Flashboot Mode when connecting to PC via usb cable.
I dont know what to do now..........

Hi,
Zip from Github have not to be flashed from a recovery.
Try posting your question here to recover your device:
Xperia SP Q&A, Help & Troubleshooting
The experts there may be able to help.
EDIT: Thread closed - Support provided in another thread and by PM.

[Completed] Blu Studio 6.0 LTE how to bypass rom verification please help

I have a Blu Studio 6.0 LTE after update it just boots to recovery mode - note: recovery mode is stock not mod and i can't even install clockworkmod. Please Help!! debug mode is off because i did a factory reset, so adb does not recognize the phone only in adb sideload. so i tried to install a factory rom from adb sideloan [verification failed] also tried from sd card [verification failed] how do i bypass the verification if its possible so i can force install a rom to fix my phone. drivers are installed tried wiping cache and reset phone no go. I need someone to please help me out here!!!

dreamsta said:
I have a Blu Studio 6.0 LTE after update it just boots to recovery mode - note: recovery mode is stock not mod and i can't even install clockworkmod. Please Help!! debug mode is off because i did a factory reset, so adb does not recognize the phone only in adb sideload. so i tried to install a factory rom from adb sideloan [verification failed] also tried from sd card [verification failed] how do i bypass the verification if its possible so i can force install a rom to fix my phone. drivers are installed tried wiping cache and reset phone no go. I need someone to please help me out here!!!
Click to expand...
Click to collapse
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in > General discussion > General > BLU STUDIO 6.0 LTE (Y650Q) - Everything about Root/Recovery/Mods/Tips. Experts there may be able to help you.
Don't post in all bold when you get there.
Good luck

Art Vanderlay said:
Hi
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA. Try posting your query in > General discussion > General > BLU STUDIO 6.0 LTE (Y650Q) - Everything about Root/Recovery/Mods/Tips. Experts there may be able to help you.
Don't post in all bold when you get there.
Good luck
Click to expand...
Click to collapse
ok thanks

[Completed] my moto e2 otus have beeb failure in booting up

hai, my mobile moto e2 otus boot up failed...
My device have been unlocked bootloader...after a. while. i switch off the phone ...and when i goto recovery mode they says BOOT UP FAILED...and also when i click on normal recovery mode that Bootloader unlocked warning is just came....when i click power off+lower button that window goes to boot mode...
.i want my device back...please anyone help me out of it.....Pls pls pls plss.........somebody gotto help me!!!

Hi there and welcome to Assist,
If you are able to boot into the fastboot, try restoring your stock firmware.
[GUIDE] Restore Moto E (2015) Stock Firmware
Additional info: How to remove the unlocked bootloader message?
You'll have to create an account to post in the main forums if you have any other questions.
> Moto E 2015 > E 2015 Q&A, Help & Troubleshooting
Good luck