I've been running a ROM I built from the consolidated kitchen this weekend without any problems. Today I updated the radio to 2.69.11 from the cingular 2.25.11. After the flash the phone froze on the windows mobile screen. After some time I tried to reset the phone and it froze again, a few more tries and it finally boots up. I didn't pull the memory card when I flashed and thought that might have been the problem so I flashed again even though the phone was showing 2.69.11. I don't remember everything after that but it wouldn't boot up and I have tried flashing the original Cingluar ROM & T-mobil 2.26 without any luck.
The phone is stuck in bootloader now and is getting a error code 302 I think it's because the phone doesn't stay on when the USB cable is attached. It gets to about 15% and the phone resets and the error 302 pops up. When connected and not trying to update the phone turns on and off in the bootloader screen. I have pulled the battery, rebooted the laptop, tried using mtty,and pulled the sim. I thought the original problem might have been because I flashed at 52% battery. I put a older battery in after that appeared to have a good charge. Right now I put the phone on charge with the newer battery to see if this helps. I am not sure if it is charging because the orange light is not on, I can't get the phone to stay turned off when plugged into the charger and the bootloader screen is on.
And yes I have been searching for hours for a solution to this problem.
Also looking for a post I read about doing a master reset, I have tried holding the 2 soft keys when turning on, didn't help.
I think this says it all I have tried everything, does anyone anything else to try?
Thanks
UPDATE: went out for a few beers and some food. Not sure it the battery charged (bootloader screen on the whole time it was plugged into the charger)
Tried flashing again with cingular ROM, got about 20% and phone shut off and turned on again in bootloader. Flash gave 302 error again. Tried again and phone reset (on and off) every 5 seconds when connected to laptop with USB.
I'm hopping someone out there has a answer for this problem.
Back from the dead HALLAULA!!!!
This morning I spent more hours searching still didn't out find anything.
I tried mtty again and noticed that I never got to the screen that shows USB>
to enter the command "set 14 0"
I came up with a thought and this is what I did. Created a new ROM, OS only. Thinking it will load faster than any other ROM. It reached 100% in 3 minuets the whole I'm coaching come on baby don't restart and than going (don't know how to explain the feeling) waiting the next 2 minuets to get to finished. But it got there booted fine. I don't know why it stayed on this time and didn't restart, maybe having the battery out all night had something to do with it. After I flashed the Cingular ROM than the original I created and lastly Radio 2.69.11
I hope this helps someone in the future,
i need your help
hi man I had a prophet s200 and give me the same error 302 but, with the diference in my case got 98% adn then stuck in boot screem, please help me if you can...and sorry for my english
Guys,
It may help checking out this thread!
http://forum.xda-developers.com/showthread.php?t=294107
Can you help me out?
How did you create a new ROM - OS only? I'm having the same problem..can you walk me through this?
Thanks
How did you create another ROM (Operating System only)? I'm having the same problem and I have tried for the past 2 weeks - but no luck. Can you walk me through it?
Thanks
I used the consolidated kitchen (sticky at the top of this forum)
Uncheck everything on Build OS.
My problems started from a version of battery status that caused the original problem and not having enough of a charge on my battery.
Make sure you are CID unlocked (if you have a G3) and your battery is charged.
Umm, you can't uncheck everything in build OS or you will have problems, especially if you don't check a tuchflo or non touch flo dll or choose a commanager and probably a few others things. I don't have build OS up in front of me to check. The whole point to this msg is that you can check everything in build OS (besides the ones that say choose only 1) and it will build an OS only rom for you. That's the whole point behind build OS.
You are correct, I was kind of going from memory since I had built the striped down ROM awhile ago.
Hey there!
The last time I powered up the display of my RAZR HD and unlocked it a lot of messages about processes and apps (I can just remember a lot of Google apps and services but I am not sure if there was anything else as well) which stopped working/running popped up (I hope I translated that correctly from German). So I thought it would be better to restart the phone. I turned it off and after a few minutes I tried to power it back on. But it got stuck right at the beginning where the red/white Motorola logo shows up. It never started pulsating. I tried to start it serveral times but it was the same every time. So I laid it down for a few days to make sure the battery is totally empty and after that I tried to start it again but it got stuck at the logo again. The only solution which I found is to reset the phone but I really need the data from the internal storage. My phone is completely stock JB 4.1.2 and was never rooted or unlocked. How can I save my data? If there is a way I would love to hear about it even if it kills my phone.
need to flash stock without erasing data, you can manage that via editing the xml file.
I bought my Xoom when they first came out and have never rooted or unlocked it. It's been a good tablet all these years, but for no apparent reason, now won't boot up. I haven't loaded any new apps on it in months. I picked it up off the charger one morning and it was frozen. I rebooted it, and it refuses to go past the "M" logo screen. Multiple soft resets had no effect. I tried a factory reset - it says "Wiping data...Performing BP Clear...BP clear failed. Formatting /data...formatting /cache...Data wipe complete." Another reboot takes me back to the "M" screen, and I'm stuck once again.
I loaded up the Motorola drivers into my computer, and plugged the Xoom in. The computer sees it on a hardware level (in Devices, it shows up as MZ602, but it never shows up as a drive letter where I could actually drag files to and from it. (As I recall, it has to be fully booted and on before it shows up as a drive letter, but I may be wrong on that. I haven't plugged it in to the computer very often)
So I'm out of ideas, other than spending $160 to send it back to Motorola repair, which I don't think I'll do for a four year old tablet. Any ideas, anyone? Thanks!
jfran2 said:
I bought my Xoom when they first came out and have never rooted or unlocked it. It's been a good tablet all these years, but for no apparent reason, now won't boot up. I haven't loaded any new apps on it in months. I picked it up off the charger one morning and it was frozen. I rebooted it, and it refuses to go past the "M" logo screen. Multiple soft resets had no effect. I tried a factory reset - it says "Wiping data...Performing BP Clear...BP clear failed. Formatting /data...formatting /cache...Data wipe complete." Another reboot takes me back to the "M" screen, and I'm stuck once again.
I loaded up the Motorola drivers into my computer, and plugged the Xoom in. The computer sees it on a hardware level (in Devices, it shows up as MZ602, but it never shows up as a drive letter where I could actually drag files to and from it. (As I recall, it has to be fully booted and on before it shows up as a drive letter, but I may be wrong on that. I haven't plugged it in to the computer very often)
So I'm out of ideas, other than spending $160 to send it back to Motorola repair, which I don't think I'll do for a four year old tablet. Any ideas, anyone? Thanks!
Click to expand...
Click to collapse
have u tried re-flashing the rom?
I have a totally stock phone, i.e. no root no flashing. From about a week ago my phone had a weird problem of automatically rebooting, also getting popups like google play services has stopped. Same messages came yesterday so i switched off my phone and when i tried to turn it on, it just wont turn on. It is not charging too and i'm sure it is not taking any power to charge or at least give a sign of life. Then i tried connecting it to computer, and in Devices and printer section computer shows unspecified device. It shows it for few seconds then wont and after few seconds it shows it again, and this process keeps repeating.
So if any one knows what can i do to solve this problem, please help!
Any help would be appreciated!
Yesterday as I was using my device just like I normally would. Browsing the web. It suddenly froze. Then it proceeded to shut down and turn itself back on and started the restart procedure. This is normal and since the Tablet is 4+ years old it used to sometimes shutdown during usage and turn itself on again. But this time it didn't. It showed the Amazon logo, went on the shining Fire logo and after staying on it for a while. It shuts itself off and again starts from the Amazon logo. I thought that if I just keep it doing that for a while it would fix itself. Sadly it did not. Luckily though it does boot to the Bootloader and I thought that maybe clearing the cache partitions would do the trick. It did not. Again I thought if I cleared the data it would fix it. That did not work either.
I never tried to root or do anything on that device. I didn't even have playstore installed. I use that device as my daily web browsing machine so I really need it to work.
Please Help
(This is my first ever forum post so please forgive me if I do anything wrong)