i recently installed cm11 on my device and it was a bad experience.i tried to install the stock back and it installed but the rom which was loading was cm11 not stock.
The tablet is in a black screen and i don't know how to restore it back to normal.i know it is a software brick.how can i resolve it. i wanted to install aokp on it as cm11 dint run well.
:crying:
plz help.
Related
I had AOKP Build 29 installed on my Transformer and I decided I wanted to go back to stock so I attempted to flash the stock FW through CWM. I ended up with a CWM bootloop and like an idiot I didn't make a back up of my previous setup. So I tried flashing back to AOKP with the rom I had saved on the tablet and still got the same thing. I cleared data and tried flashing an old version on Android HD that I had on the internal SD card and that still didn't work. So I then figured I'd try flashing stock FW again....This is where things got weird. It seems that it only flashed the recovery. So now I'm stuck with stock recovery, but as soon as it boots into recovery I get the android w/! and ADB won't recognize it. I also tried doing an NVflash, but after I put the tab in APX mode and start the NVflash the tab disappears from my list of devices on my PC running windows 7 64bit. Any help to fix this will be awesome. The only thing I can think of is to uninstall the drivers and reinstall them to see if that fixes it.
I got a similar problem today. I put it to APX mode, start nvflash, it flashes the first images and when it starts flashing the bootloader my TF disconnects and turns off.
Please help!
Bump. Over 230 views and no ideas yet?
Sent from my Galaxy Nexus using Tapatalk 2
Hi, I have problem with my A510. The situation right now is that i am stuck in CWM menu. I mean, i can let the system to boot up, but as soon i see the desktop it freezes and reboot. And then over and over again.
I have cynogenmod version 10.1.2 with android 4.2.2. As I said a few weeks it was ok, but now suddenly system had stopped.
Is there any solution. Of course i can't get adb commands to work.
I tried to flash another ROM, but no luck. It says update successfully installed but, when i restart i still have old cyanogenmod installed. I don't understand this...:crying:
Anyone?
I think there must be a solution for this. Please help!
I just updated to Cyanogen 10.2
I have the GT- N8013 Note 10.1
Ever since I updated it my touch screen doesn't work half the time or when it does it doesn't do anything.
I wanted to know if anyone has had the problem or so of some things I can do to fix it.
I've done a factory reset. I've even tried to flash a different rom and nothing. Any help would be appreciated.
Hi everybody,
First of all, I must tell you that I've been using Android devices for over 3 years. So, I'm not a total newbie with Android. I must say that I've always been using Stock Android so far. Which makes me a real amateur in customisation.
That been said, here's my actual problem. I have rooted my tablet and unlocked the bootloader through the Transformer Toolkit available on Asus website following a step by step walkthrough. Everything went well. I have SuperSU installed and I'm rooted. Also, I have that little message saying my bootloader is unlocked when I turn my tablet on. No issue yet.
Since I'm still an amateur in installing custom ROM, I downloaded ROM Installer which is supposed to do all the dirty work for you. I chose CM 10.1.3 Stable since I wasn't interested in Nigthly yet. It downloaded normally. Once that was done, I used the ''Install ROM from SD Card'' option. It then rebooted in TWRP Recovery Mode, did a Backup and I wiped cache & Dalvik. It did what it had to.
Now, the tablet rebooted and the CynagenMod logo appeared with a blue circle spinning. Visually, it seemed to do something like an installation or something so I let it run all night. This morning, it hadn't change. The logo is still there with the spinning blue line. I can't do anything, no icon, nothing. I rebooted my tablet by holding the power button a few seconds. It restarted, showed the Asus logo and went back to the CyanogenMod logo again. Same thing as yesterday. I'm stuck there. Whatever I do, I can't get pass that logo.
My question is... Is there something I did wrong ? Otherwise, is there a way to get back to my stock 4.2.1 Android version ? I'm kinda afraid to do anything since I don't want to brick my tab.
I'm awaiting your tips and comments. Oh and please, don't be too harsh, English isn't my primary language and I tried to be as clear as possible. If you need more information, don't hesitate to ask.
Thanks in advance
I do not run CM roms, but it sounds as if you are on the wrong bootloader. Check here: http://forum.xda-developers.com/showthread.php?t=1957660
Try to get into TWRP by holding Volume Down and Power buttons. Hopefully you made a nandroid before you flashed??? Restore it and you are back on your stock rom.
Or copy the Asus firmware on a microSD (unzip the downloaded file once on your computer, put the resulting zip on the microSD) and flash that in TWRP.
But you will loose your custom recovery and probably all data if you do this, and will have to start from scratch.
Thanks, I was able to restore my recovery and went back to my Stock ROM.
I tried flashing CROMI and it worked at first try. Now this pad is a bomb!
Envoyé de mon ASUS Transformer Pad TF700T en utilisant Tapatalk
(backstory) Hi, ive had an Asus TF300T, for about 3 years now, unlocked, rooted it pretty early on... cycled between cyanogenmod and omnirom quite a bit, without really any major issues. Until today, i was running Cyanogenmods latest nightly build (CM11 Nov 5 2014), it worked just as any other nightly does a few bugs here and there, but nothing major and i hadn't done any major flashing or modding to the device. On my home from university, I turned my tablet off. And when i got home i plugged in the charger, and just as always the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.5
I had TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Edit: I dont know why, but when i try using fastboot or adb, the device isnt recognized. It doesnt show up on device manager either. I dont know if its the cable cause i bought it new, it says its can sync data, or a faulty charge/sync port....
razr9622 said:
(backstory) the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.1 (I know that theres a newer version 10.6.1.27.5, but when i try to flash it, the recovery says error and fails)
I have TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Click to expand...
Click to collapse
^THIS!
I was just to open a similar thread, then i saw your post. I join your request for help!
A month ago i have done a favor to a friend by unlocking his tf300t and installing CM11 on it. A few days ago he comes to me with this problem. I've tried anything but still no success:
- restore a backup done before flashing CM11 --> restore ends correctly but the problem remains
- flash a rom (CM11 and OmniRom) --> flash ends correctly but the problem remains
- flash the stock firmware found on asus website (WW_epad-user-10.6.1.27.5.zip, the SKU is correct for my version) --> the flash process stuck (i had to force restart the tablet after almost 2 hours of "flashing")
Since the boot animation changes according to the rom, i suppose the flashing process works. But the problem remains: after a few seconds the animation freeze and the device restarts, in loop.
Informations on the system:
- build 10.6.1.27.5
- TWRP v2.7.0.1 (working!)
- adb works (i managed to set /data as rw and push the .zip file to flash)
- fastboot should work
Please help! I feel a bit responsible for bricking my friend's device
SOLVED!
Finally!
I had already tried this method, before requesting for help, but the first time didn't worked... I don't know why this evening the tablet decided to collaborate:
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
That worked for me! :victory: