Q&A for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
no sound, no auto-rotate
I am fairly new to Rooting and updating my Xoom to the newest Kitkat system. I am having 2 issues as of right now. The sound has never worked no matter what the settings say, and initially the auto-rotate was functioning and suddenly it stopped.
I have checked all options/setting and see nothing that should explain either of these 2 issues. I also didnt add any new apps in the time from initial update to the auto-rotate not working so if anyone has any suggestions or ideas, it would be greatly appreciated.
Again I am fairly new to all this, so the simpler or more detailed the potential solution the more likely I will understand it.
Thanks.
No sound on Omni 4.4 cmda version
I love the rom, only problem is I have no sound on the cmda version. I read the comments and saw people suggest install the top rom version over the bottom and then reflashing gapps. Should have sound. When I do this tablet boots but keeps giving me error "Unfortunately, the process com.android.phone has stopped" I say ok but it keeps coming up and wont let me get any further. Any suggestions?
volume issue
Anyone know how to fix the no sound issue in omni rom 4.4.4 stingray cdma? I cant get any sound at all. Help would be appreciated.
Took a couple go's but now up and running 4.4.2!
Thank you!
First time I've moved from the standard stock implementation, never even rooted the device before, but a couple attempts and following your instructions I managed to install BigPart, Flash omni-4.4.2-201XXXXX-everest-HOMEMADE_XXXX.zip, gapps-xxxx.zip & UPDATE-SuperSU-v1.86.zip.
I was about to give up on the Xoom and buy something newer, Tab S or something, but this appears to have put new life back into the old Xoom!
Followed the instructions above, but could not get it to clear Dalvik, failed every time. In the end I bit the bullet and formatted the internal drive, then flashed again - worked like a charm - figured since I was going to pass it over for a new one or this was going to work I had little to lose. As it happens I now seem to have it back & working well.
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Blackdogn3 said:
Now have bunch of apps back installed and trying them all out, so far most appear to be fine; though Google maps crashes whenever I zoom in too far.... less than a country level, I don't mean excessively far - thoughts?
Click to expand...
Click to collapse
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
slow1234 said:
Google Maps v9+ has problems on the Xoom with all the different custom ROMS (Omni, CWM, EOS, etc). You need to downgrade to Maps v8.4.1 to get it to work.
Click to expand...
Click to collapse
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Blackdogn3 said:
Thanks as said a newbie! Downgraded and working fine - thanks for quick reply
Click to expand...
Click to collapse
It has also been noted that 9.2.0 is rolling out and that it works on the Xoom. I updated yesterday and did a quick check - it does appear to work fine!
No Sound
After I flashed "[ROM][4.4.4] OmniROM - Stingray/Stingray_CDMA - bigPart." onto my Verizon Motorola Xoom 4G Tablet,
I have no sound at all and also the auto-rotate feature does not work (stays locked in portrait mode until reboot).
A number of other forum members have posted the same problem. Can we get a solution from someone on the forum?
have all but twrp v 2.6.3 big part
I have every thing I need except big part v2.6.3, none of the links I've found work? Does it have to be v2.6..3. ? There seem to be updated versions?
No 3g or 1x fallback
Install this today, everything went ok, execpt i could not get verizon 3g or 1x service. 4g works fine, when i have coverage. SBF back to stock again i guess.
e:unable to mount '/cache
The process for flashing the xoom (stingray model) seems somewhat straightforward. Yet I can't seem to get a working flash from the effort. Two problems:
1) during the "wipe this and that" stage while running in recovery, I get "FAILED" for each of the requisite areas to wipe, along with other messages such as that in the title. while i find a handful of other posts within this forum from folks experiencing the same problem, i find nothing in response with useful suggestions to fix what's apparently broken;
2) the tablet boots up to the OMNI splash-screen, and that's it.
I've repeated the steps at the head of this thread umpteen-zillion times. But the result is the same after each attempt. Either some critical step (or two) is/are missing from the initial (and horribly written) description, or I have the most stubborn tablet built.
i haven't bricked the thing... i can access it via adb, and i can get into recovery with no issues. what i can't seem to do is:
1) find a TWRP download using the links provided that doesn't trip quarantine due to virus detection; or,
2) find a coherent set of instructions that correctly describe the logical flow of the process of flashing a ROM on a Xoom.
Suggestions?
CDMA Voice and data programming
Hi,
Thanks for your effort and excellent work but I need some help, The main thing i want to try, is to get back my CDMA signal because since i tried the stock rom 4.1.2 i was not able to get any Data working there, my xoom is a just CDMA with no sim or LTE upgrade and i already tried 2 basebands on it the one with the last version of the stock room and the one that gets installed with the IMML update but no luck, if by any chance you have the first baseband it would be great i guess its something like 2.00.
Another question that I have is related to BP tools or programming the Cdma xoom, every time I try to start in bp tools I was not able to see the utility, just today i tried to connect to my PC and its not able to connect to CDMA Workshop or QPST, is there a way to do that? i need to activate something? any idea would be great!
And would be great if you have any MZ600 SBF where has included the first baseband 2.00 'cause probably it will help me to recover my 3g data (it's the only thing i didn't find and try).
Thanks!!!
is this have a default calling future like any mobile?
Thank You to OmniRom for xoom devolopers (all of you)
I just wanted to post a thank you to all of the developers of the omnirom for xoom. I was able to install it tonight, with a couple soft brick scares, but it is up and ruining. I love my xoom and am very appreciative.
Thanks....Steve
Xoom OnmiROM freezes
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
semi-anonymous said:
I've got a similar problem to the problem outlined in this post. My son also has seen it on his Xoom.
When it becomes unresponsive (either on the dock or not), the only way I can recover is to hold the volume up and the power button until the tablet reboots. To me, it appears it goes into a deep sleep that the power button alone can't wake it up from.
There seems to be no set time period that the tablet has to be up before it hangs. Sometimes I can set it down for an hour and other times it's still responsive the next day.
Click to expand...
Click to collapse
It's not real common for this to happen, but this same issue does occasionally happen on the CyanogenMod 11 Rom also. Other than this, and the workarounds to do a few other things in Android 4.4.4, the Xoom has been a real God send that is just amazing.
Non-Functioning Sensors post-flash w/Omni Stingray
Finished flashing XOOM 4G with (in order listed):
Xoom-Universal-Root
R.A.H._TWRPv2.6.3
omni-4.4.4-20141130-1816+0100-stingray_cdma-HOMEMADE
pa_gapps-modular-pico-4.4.4-20150215-signed
UPDATE-SuperSU-v2.45
After I noticed that the auto-rotate didn't work, I downloaded "My Android Sensors" from the Play Store. It shows the NO sensor is working. What gives..?
Looking for file EOS-Stingray-imm76l-radios-update.zip
Hi all,
Can someone help with the file ?
EOS-Stingray-imm76l-radios-update.zip
Thank you
The Rom works great.
I installed it month ago and it is working fine.
Batterylife is perfect and all things are working.
Thanks
Hi there, I bought an S Relay when it was first released here in the US. I just have a tiny issue with it that still hasn't been resolved in however many times I've updated the damn thing.
I currently have a cyanogenmod based rom on the phone, but this happens with almost any cyanogenmod rom. (Including the official ones) The screen, even though I unlock the phone, will sometimes decide to stay dark or give me this weird broken-crt pattern with bits of what I'm supposed to be looking at jumbled in. Does anybody else have this issue? Or am I just crazy?
In this respect, the offical samsung rom works great with the phone. I would use it if it didn't suck so bad, which is why I want to figure this out. The specific rom is FatToad[Android 5.0.2] by TeamApexQ, but this has happened ever since they started development on the cyanogenmod rom way back when.
Are you using bluetooth when this happens? As of FatToad 5.0.2, currently the only verified reason for this to happen is memory exhaustion (and resultant spike in CPU as it attempts to swap and fails) The only thing I've seen to cause this and not fall prey to Android's low memory killer is the bluetooth stack which seems a bit buggy. If you are not using bluetooth, please send me a logcat of the issue. Also, when this happens, can you still get to adb?
Magamo said:
Are you using bluetooth when this happens? As of FatToad 5.0.2, currently the only verified reason for this to happen is memory exhaustion (and resultant spike in CPU as it attempts to swap and fails) The only thing I've seen to cause this and not fall prey to Android's low memory killer is the bluetooth stack which seems a bit buggy. If you are not using bluetooth, please send me a logcat of the issue. Also, when this happens, can you still get to adb?
Click to expand...
Click to collapse
I'm going to install android studio now and see if I can get the log info. But no, without bluetooth enabled, this still happens.
I just dumped the log from my phone around when this happens. It took a few tries to get it to happen, but it eventually did. I stopped logcat right after I got the screen to wake and unlock successfully. I'll attach it here.
Also, adb does work even when the screen doesn't wake up.
(I had to zip it since the size nazis caught me 36 kb over the 512 kb limit.)
jjsullivan5196 said:
I currently have a cyanogenmod based rom on the phone, but this happens with almost any cyanogenmod rom. (Including the official ones) The screen, even though I unlock the phone, will sometimes decide to stay dark or give me this weird broken-crt pattern with bits of what I'm supposed to be looking at jumbled in. Does anybody else have this
Click to expand...
Click to collapse
Same problem here, and I have yet to find a solution (CM11)
I tried to change the governor, and it seemed to work, but then I*updated to Valdius 5.0.2, and no wakelocks.
Can anyone help me regarding my Huawei Ascend Mate Rooted its on rom B907 , android 4.2.2 the problem is wifi frequently disconnects and then reconnects on its own it's so annoying especially im playing Clash of Clans then just disconnects, i already tried changing security type of my router/change power manager from endurance/smart/normal mostly im on normal mode. Also keep wifi on during sleep is set to always/ Avoid Poor Connections Uncheck/ Wifi optimization Unheck. Really appreciate someone could help.
I never had this problem on 4.1.2 stock rom.
Really need your'e help because im not really familiar with ROMs im not that techy
Hi, thank you for using XDA Assist. It sounds like it maybe an issue with the Rom if you did not have problems on stock. See if others are having that problem. See your device's specific forum here, http://forum.xda-developers.com/ascend-p6. They are the experts on your device.
Hello everyone.
I'm having trouble with my h950 (installed the PR 5.1.1 rom long time ago) device.
A week ago WiFi stopped working. This is:
When I choose a network I want to connect to, it starts connecting but instantly the wifi turns off and then it turns on and it turns off and so on...
I already tried doing a hard reset and also installing the KDZ for the 5.1.1 PR version again but it remains the same.
Has anyone gone through this issue or anyone who can give me any advice?
Thanks
more info?
Hi there,
what is the *exact* behaviour your WiFi exhibits? Does it keep flashing like in this video?
https://www.youtube.com/watch?v=4W8YJMDFM88
If so, you might be experiencing a hardware issue. I've written a detailed summary about this, you may want to check it out here: http://forum.xda-developers.com/general/help/qa-wifi-stuck-mac-020000000000-g2-g3-g4-t3452133
Good luck, and keep us posted if you find a solution for your problem!
NimbleWeasel, thanks for your reply.
I got a friend to upload a video. on youtube Not the best quality. Ignore the sounds
I can't post a video since I'm a new user. The youtube id for the video is R1pKIzJ5mwg
I think it IS the same problem.
If it actually is a hardware issue, I guess I'll just have to get a new phone.
WiFi trouble...
hi disreggae,
i watched your video but it seems to be a different problem.
i'll write you a private message with something that you can try if you want.
my wifi is not working
It says its on but nothing is showing up and I can't connect to anything and my wifi will not turn off and I tried to reset everything and still is not working