Database Info

Hardware or Software Audio Issue

First of all, I've been searching for 4 days and trying everything that has been suggested, but I haven't found a solution yet. The only issue I have with the phone's audio is that I "can't hear" the person on the other end with the phone alone. If I have a headset plugged in or I'm on speaker phone then everything works fine.
I have tried the stock rom with both the new 21Y baseband and old 21E baseband. I have tried custom roms with both basebands. I have flashed the new and old audio fixes (owain) for both. I have exhausted every possible solution I could find; however, I might have overlooked some. So, that is why I'm asking for your help.
I have basically come to the conclusion that it is a hardware problem with the phone.
Currently:
Baseband 21E
ROM Stock 2.3.3 (untouched)

Jawbone UP not recognized with 4.2.2 ROMS

Hey All,
I purchased a jawbone UP this weekend and was running Slim Rom on my HD. The way the UP works is it syncs its data through the 3.5mm headphone jack. The first one I bought wouldn't get recognized at all on any 4.2.2 ROM and when I revert back to a 4.1.2 based ROM it would recognized and unlock and everything, just woudlnt sync. I ended up with a defect DOA device and had to get a new one.
the new one however now works fine on the 4.1.2 ROM. i havent tried to switch back to 4.2.2 yet but i have a hunch that it won't work.
I wanted to know if anyone else has one of these and if they are using a 4.2.2 ROM and have it working. if so what ROM and Kernel combo are you using? I didnt wanna go nuts flashing random crap just to see if it works but i'll get a feeler here and see
thanks,

It's a known issue with 4.2.2 ROM. I had the issue with my Bionic too. I ended up returning it.

I can vouch that it works on the carbon night lies.

But it works with stock
I had the same issue with my Buttered AOKP ROM. Since I used SS3, I switched to my stock ROM and everything works fine. So, I just switch ROMs (a matter of a couple of reboots) whenever I want to sync data. I know it sucks... But till Jawbone supports custom ROMs, this seems the only way to use the UP app.
I have installed UP on both ROMS (my stock ROM (4.0.3) for syncing and on my 4.2.2 ROM for my other data-wrangling stuff).

GPE kit-kat
I have the galaxy s4... i was running gummy rom 4.4.2 and had this problem. I didn't want to go stock cuz i would lose tethering ability unless I modded this separately, so i tried the Google play edition and this works for me. have been using since with no problems.
xavierroy said:
I had the same issue with my Buttered AOKP ROM. Since I used SS3, I switched to my stock ROM and everything works fine. So, I just switch ROMs (a matter of a couple of reboots) whenever I want to sync data. I know it sucks... But till Jawbone supports custom ROMs, this seems the only way to use the UP app.
I have installed UP on both ROMS (my stock ROM (4.0.3) for syncing and on my 4.2.2 ROM for my other data-wrangling stuff).
Click to expand...
Click to collapse

Oneplus One Proximity sensor problem after reverting to CM11 (WITH CORRECT MODEM)

Hello,
I am facing a weird problem regarding the proximity sensor on all CM11 roms.
I was using lollipop roms for a long time now, and have been following latest builds, until I decided that I liked KitKat more. I already had a backup of temasek's last CM11 build, so I reverted to that one, after flasing the cm11 firmware. All was working perfect until I reverted a backup of my 5.1.1 rom, to try xposed. Again, before doing so, I flashed the latest cm12 firmware. After a couple of days experimenting with xposed, I eventually went back to my kitkat rom. After boot, I noticed that the proximity sensor wasn't working. I had already flashed the cm11 firmware before restoring, but I went and flashed it again. Problem was still there. I then tried cm11s 44s firmware, 05Q firmware and 05Q modem only. The proximity sensor problem was there in all cases. (Shows 0.0cm, like I always have my phone in my ear or pocket). I then tried flashing a complete cm11s rom (05Q) with no success.
This is not a hardware problem, as the sensor is working FINE on ALL lollipop roms. I used sensor box in all my tests. I even tried proximity fix from play store, but it did nothing. I also tried to install it as secondary on multirom, then flash the firmware, but again, no success.
I really really need some help on this one, I can't troubleshoot it on my own, I am out of ideas.
Thanks in advance.
(My device is OnePlus one - always using boeffla kernel on both lollipop and kitkat roms.)
EDIT: Solved. Look at my last post.

Flash again only modem but matching http://forum.xda-developers.com/oneplus-one/general/ref-oneplus-one-modem-collection-t2858734 I had the same problem, flashing again modem solved this issue for me.

chazxt said:
Flash again only modem but matching http://forum.xda-developers.com/oneplus-one/general/ref-oneplus-one-modem-collection-t2858734 I had the same problem, flashing again modem solved this issue for me.
Click to expand...
Click to collapse
Hello,
Which modem did you flash from that thread? I have only tried the 44s from there but it was a no go.
Thanks in advance.

XNPH44S for me it worked

Hello,
Finally found a fix for my problem.
It seems that I had to flash from fastboot the CM11 nightly modem from here: http://forum.xda-developers.com/showpost.php?p=57125376&postcount=389
The process doesn't wipe anything in case anyone is wondering, it just flashes the modem ( NON-HLOS.bin)

[HELP] All Sensors NOT Working after Flashing Lollipop ROMs

I flashed Euphoria-OS 1.1 (June-29 build, Lollipop v5.1.1), everything was great except non of the sensors work - accelerometer, orientation, proximity etc. I then downloaded a sensor app and it said "sensors are not present on your device".
The Euphoria Lollipop was a clean flash from PA v4.45 (Kitkat 4.4.4), I wiped everything and did factory reset. Flashed cm12 firmware before I flashed ROM and Gapps to avoid problems. Because I only noticed sensor issue after several hours, I thought it might be caused by an app I installed, went back to the drawing board and did a another clean flash, still no dice. Went on and flashed other Lollipop ROMs like CM12 nightly and XenonHD, still the same problem.
I've now done a Nandroid restore and back to PA Kitkat, all the sensors are working fine. So no hardware issue, definitely Lollipop specific.
Any help would be greatly appreciated, desperately wanting to bring my OPO to lollipop. Maybe I should flash a new radio? not sure if that'd do anything to the sensors :crying:

mickey4mice said:
I flashed Euphoria-OS 1.1 (June-29 build, Lollipop v5.1.1), everything was great except non of the sensors work - accelerometer, orientation, proximity etc. I then downloaded a sensor app and it said "sensors are not present on your device".
The Euphoria Lollipop was a clean flash from PA v4.45 (Kitkat 4.4.4), I wiped everything and did factory reset. Flashed cm12 firmware before I flashed ROM and Gapps to avoid problems. Because I only noticed sensor issue after several hours, I thought it might be caused by an app I installed, went back to the drawing board and did a another clean flash, still no dice. Went on and flashed other Lollipop ROMs like CM12 nightly and XenonHD, still the same problem.
I've now done a Nandroid restore and back to PA Kitkat, all the sensors are working fine. So no hardware issue, definitely Lollipop specific.
Any help would be greatly appreciated, desperately wanting to bring my OPO to lollipop. Maybe I should flash a new radio? not sure if that'd do anything to the sensors :crying:
Click to expand...
Click to collapse
Haven't ran CM12.1 so I'm not sure if they're having any issues with the sensors but have you tried OxygenOS or CM12S?
I know those 2 lollipop builds by far are the most stablest as I use them as a base for my ROM and all works fine. But to reduce the hassle, you can always stay on kitkat
Side note: Do you have a link for AOSPA KK?

Are you sure, you flashed the latest firmware? What is your baseband version in Settings>about phone?

Okay I finally got it resolved after reading through the thread about non-working proximity sensor. What I did was extracting NON-HLOS.BIN file from firmware and flash it with fastboot. Apparently flashing firmware in TWRP did not update at all, wired.

WiFi, Cellular and Bluetooth not working after flashing cm12.1

I was using CM12 on my device for quite some time and everything was working fine. Then I decided to flash CM12.1 and coincidentally, it was the a couple days after CM had announced their discontinuation of CM ROMs. After flashing the ROM all of my WiFi, Bluetooth and Cellular were not working when booted in CM12.1. I thought it was the ROM's bug and then clean flashed the old CM12, but my my WiFi, Bluetooth and Cellular were still not working! So I flashed my device's original firmware like I always did using flashtool "C2104_15.3.A.1.17_Generic". WiFi, Bluetooth and Cellular were still not working in the now 4.2.2. I tried various ROMs - LOS14.1, CM13, Resurrection remix but no luck, my wireless utilities are still not working. Do you know how to solve this? I don't have any data on the device so I am prepared to use any tools/techniques to get the wireless utilities back.