just try flash miui rom , after flash the phone wont boot , and the cwr also not work , it will boot to recovey by 3 button , but i cant select anything to install or anything all i can do it pull battery to turn it off , any help please ?
Sounds like the back button is disabled in cwm ...just scroll to the top til it comes around to the bottom and then back up and it should reenable it and then you can flash...normally it takes two flashes to flash miui or cm7...
Boot into recovery
Wipe data, cache, dalvik cache
Install zip from SD card
Choose zip
Flash
Reboot
When it fails to boot
Pull battery then reinsert
Volume up, volume down plus power until Samsung logo appears. Then release...when recovery comes up
Reflash miui without wiping
Reboot
Enjoy
ALL HAIL *Z*E*U*S* !
i know take 2 flash for miui , but when im in the cwr i cant hit power to select anything , so that y i cant flash again
when im in cwm recovery , it say fail to open /etc/recovery.fstab no such file or directory and i cant use the power button to select to install zip
I have used link to root my device however it is not working for me
http://forum.xda-developers.com/showthread.php?t=1837575
Please help me with steps CWM and then rooting and also unrooting
thanks in advance
Pre-reqisites.
Download ODIN from here
Download CWM any version from here
Download ardatdats kernel from here.
How to Root.
1. Flash CWM Via Odin v1.85, let the phone restart.
2. Download Ardatdat's v4.2 beta 6 and place it in the sd card (it comes prerooted and is the safest option for rooting)
3. Now switch off the phone
4. Turn it on again and as soon as he Galaxy R screen appears, press the volume up+center button.
5. If you see "booting android recovery" that means u have done it correctly and you will enter CWM. If u dont see repeat step 3 and 4.
6. Now in CWM select the option install zip.
7. Then select choose zip.
8. Select the ardatdat's kernel zip file and select yes.
9. Let the process complete.
10. Wipe cache and dalvik's cache (option in CWM Advance) and switch off your phone for 5 minutes.
11. Turn it on..and your phone is now rooted and brick bug free.
If you do not wish to root via ardatdats kernel, download flashable zip of SUPERSU OR SUPERUSER. And follow the same steps from step 2.
How to Unroot.
Download the UNROOT package.
Flash via CWM.
Note: You cannot UNROOT if you are on ardatdats kernel.
Sent from my GT-I9103 using xda app-developers app
You can recover from boot loop issue in cwm 5....
You can try one of the following:
Download cwm 6
Put it in ext sd card
Select install zip from sd card and chooze zip
Flash it
Wipe delvik cache and cache partition
Reboot
Now the second one
(In this method you will get to stock rom and lose root)
First download odin3 v1.85
Download stock firmware
Extract both in a particular folder
Open odin
Go to Download mode in ur phone and press volume up
Connect ur phone to pc
If odin shows a yellow mark then u are ready to proceed
Mark PDA & Select The 7500ZSLD3_S7500HKTWLD3_S7500LD3_BRI_HOM
Click start in odin
Keep patience
After process is over odin will show pass
Now ur phone will reboot
(DO NOT REMOVE USB CABLE TILL ITS REBOOTED PROPELY)
Complete the setup
(NOTE THAT THE LANGUAGE IS CHINESE SO CHANGE IT BY CLIKING ON BOTTOM RIGHT OPTION AND CHOOSE ENGLISH)
Now again switch off mobile as as the process has not been completed yet
Go to recovery mode (this time it would be stock recovery not cwm)
In recovery mode select wipe data factory reset and wipe cache partition
Reboot.
Now u are done!!
HIT THANKS IF I HELPED
Cwm 6
Odin-http://www.androidlegend.com/dl/Odin3_v1.85.zip
Stock firmware-http://www.hotfile.com/dl/155496447/6a45930/S7500ZSLD3_S7500BRILD3_BRI.zip.html
Sent from my GT-S7500
Very nice tutorial bro, but there is a much easier way to fix boot loop issue without flashing another recovery.
Download this file: https://www.dropbox.com/sh/gh7yw46d45kq57n/FUMu0MIdrm/FIX BOOTLOOP.zip
And flash it through bootlooping recovery.
All credits goes to mb-14 for the shell script, I only made it flashable.
You can also use adb to execute it.
Ya its also nice
Thanks any way
Sent from my GT-S7500
[email protected] said:
You can recover from boot loop issue in cwm 5....
You can try one of the following:
Download cwm 6
Put it in ext sd card
Select install zip from sd card and chooze zip
Flash it
Wipe delvik cache and cache partition
Reboot
Now the second one
(In this method you will get to stock rom and lose root)
First download odin3 v1.85
Download stock firmware
Extract both in a particular folder
Open odin
Go to Download mode in ur phone and press volume up
Connect ur phone to pc
If odin shows a yellow mark then u are ready to proceed
Mark PDA & Select The 7500ZSLD3_S7500HKTWLD3_S7500LD3_BRI_HOM
Click start in odin
Keep patience
After process is over odin will show pass
Now ur phone will reboot
(DO NOT REMOVE USB CABLE TILL ITS REBOOTED PROPELY)
Complete the setup
(NOTE THAT THE LANGUAGE IS CHINESE SO CHANGE IT BY CLIKING ON BOTTOM RIGHT OPTION AND CHOOSE ENGLISH)
Now again switch off mobile as as the process has not been completed yet
Go to recovery mode (this time it would be stock recovery not cwm)
In recovery mode select wipe data factory reset and wipe cache partition
Reboot.
Now u are done!!
HIT THANKS IF I HELPED
Cwm 6
Odin-http://www.androidlegend.com/dl/Odin3_v1.85.zip
Stock firmware-http://www.hotfile.com/dl/155496447/6a45930/S7500ZSLD3_S7500BRILD3_BRI.zip.html
ja
Sent from my GT-S7500
Click to expand...
Click to collapse
Cwm bootloop can be also fixed by flashing amy other recovery or flash the same recovery again...
guys,
my tab2 starts up with a system recovery screen.
i started reading on the forum, and according to many threds, i ned to wipe data/factory reset and then flash a ro. so i copied a rom(omni 4.4.2) to my micro sd, wiped data/factory reset but then it stops. There is no flash option in the system recovery screen.
anyone who can help?
thanks ina dvance.
Sounds like you are dealing with the Stock recovery.
To flash a custom ROM you FIRST need to flash a custom recovery to flash the ROM.
- For CM11 flash Philz Touch or CWM Swipe Edition through ODIN3.
- For OMNI flash TWRP through ODIN3.
This means: Get the .tar.md5 from Android Andi's file repository, install ODIN3 + USB drivers on your computer, put the Tablet into Download Mode, start ODIN3, select the recovery file as a "PDA" file, connect the tablet, flash it, disconnect after flashing, get into the custom recovery (Power + Vol UP), flash the ROM + gapps.
Or ... maybe read the OP post of the custom ROM you want to flash with a bit more care and attention - it's usually pointed out that you need a custom recovery in order to flash the ROM (stock recovery won't cut it).
BoneWithABeagle said:
Sounds like you are dealing with the Stock recovery.
To flash a custom ROM you FIRST need to flash a custom recovery to flash the ROM.
- For CM11 flash Philz Touch or CWM Swipe Edition through ODIN3.
- For OMNI flash TWRP through ODIN3.
This means: Get the .tar.md5 from Android Andi's file repository, install ODIN3 + USB drivers on your computer, put the Tablet into Download Mode, start ODIN3, select the recovery file as a "PDA" file, connect the tablet, flash it, disconnect after flashing, get into the custom recovery (Power + Vol UP), flash the ROM + gapps.
Or ... maybe read the OP post of the custom ROM you want to flash with a bit more care and attention - it's usually pointed out that you need a custom recovery in order to flash the ROM (stock recovery won't cut it).
Click to expand...
Click to collapse
thanks for the reply.
SOmehow i got the tab back into flashing to a samsung rom. Am happy it is working again, although it is with a samsung rom(those things are slow )
Will start the procedure youre suggesting.
Regards.
Found this how-to guide and thought it might be nice to have it on site here in XDA. This is to go back to Stock ROM and Recovery. I know a lot of the roms right now are pretty experimental so here's a guide to go back to stock if you need a more solid daily driver for now. Anyway, onto the guide, but first, the sources:
Credit goes to Pedro Armindo over at: https://eusouandroid.co/instalacao-rom-original-zenfone-3-android-7-0-ou-6-0/
There's also a video here: Revert Zenfone 3 to Stock
HOW-TO: Go back to Stock Rom on ZE552KL/ZE520KL
Download the Original Rom
1. First things first, we need to download the original rom zip from ASUS for either Android 6.0 or 7.0. Go to the ASUS site and download the one that corresponds to your phone. The latest firmware for ZE552KL is WW-14.2020.1708.56:
Zenfone 3 ZE552KL - Download Original ROM
Zenfone 3 ZE520KL - Download Original ROM
2. Download the ROM, put it inside your SD (memory card) and put the SD in ZenFone. If you do not have a memory card, get one!
Install the Original Recovery
1. Download the original recovery for you ZenFone 3. Get the Recovery for the ROM you just downloaded eg. If you downloaded WW-14.2020.1708.56, donwload the corresponding recovery.
Download Original Recovery
2. Download the RootKit zip file that includes fastboot and extract it somewhere: Zenfone 3 Rootkit
3. Copy the recovery.img and boot.img to that folder from the zip you downloaded in Step #1.
4. Turn off your ZenFone 3 and turn on MODE Download (Fast Boot), to do this hold Volume Up + Power Button for 3 seconds.
5. Plug your Zenfone 3 into the computer.
6. In the RootKit folder, hold Shift and right-click anywhere on the screen and select Open Command Window here.
7. The next command will install Recovery Original, type:
Code:
fastboot flash recovery recovery.img
8. Now install the Original Boot, type:
Code:
fastboot flash boot boot .img
9. After that, wait for the success message to hold the power off button until Zenfone 3 reboots;
Installing the Original ROM
1. Turn on Recovery Mode by holding Volume Down + Power Button
2. You will be in the original Recovery.
3. Navigate with the volume buttons to Install update from SD.
4. Select the ROM you downloaded and wait for the installation to finish.
5. Go back and do the wipes
Code:
Wipe Data Factory Reset
Wipe Cache Partition
5. Restart and the Original Zenfone 3 Rom will be installed.
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
CLIIV3 said:
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
Click to expand...
Click to collapse
Did you make sure the boot.img was not corrupt. Maybe try downloading and flashing it again? Sounds odd.
CLIIV3 said:
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
Click to expand...
Click to collapse
maybe a mismatched recovery/kernel version.
Which version of android are you running? Easiest way to test is just to flash a newer stock Rom. Since you have TWRP, do a full nandroid back up and then flash the latest nougat Rom and it should overwrite recovery. If recovery now works, extract the recovery partition, flash TWRP, restore your data backup and then restore your recovery backup.
got it done now just had to get the right rom for the phone and flashed it over on twrp but know it said it was rooted and then kinda just took itself off of it when doing root check its taking around 30secs to tell me unrooted when before it would tell me if it wqs or wasent in a few seconds
I have done every thing correctly, in original recovery when i press "install update from sdcard" i get "Couldent mount /sdcard" and thats it. iam stuck.
(BTW there is no sd card installed, only internal memory)
how can i resolve this?
UnKnOwN-1 said:
I have done every thing correctly, in original recovery when i press "install update from sdcard" i get "Couldent mount /sdcard" and thats it. iam stuck.
(BTW there is no sd card installed, only internal memory)
how can i resolve this?
Click to expand...
Click to collapse
try to use adb sideload
I used an external sdcard and all is working, thanks ?
Bootloader open.
ZE552KL bootloader relock isn't working.
Hi,
I would like to revert to stock but i cannot find the original recovery for my ZE520KL (ASUS_Z017D) because on your mega link there is only the original recovery for the Z012D_WW_14.2020.1708.56
Could you add "Z017D_WW_14.2020.1708.56" or indicate which one to use please ?
kyle_l88 said:
Found this how-to guide and thought it might be nice to have it on site here in XDA. This is to go back to Stock ROM and Recovery. I know a lot of the roms right now are pretty experimental so here's a guide to go back to stock if you need a more solid daily driver for now. Anyway, onto the guide, but first, the sources:
Credit goes to Pedro Armindo over at: https://eusouandroid.co/instalacao-rom-original-zenfone-3-android-7-0-ou-6-0/
There's also a video here: Revert Zenfone 3 to Stock
HOW-TO: Go back to Stock Rom on ZE552KL/ZE520KL
Download the Original Rom
1. First things first, we need to download the original rom zip from ASUS for either Android 6.0 or 7.0. Go to the ASUS site and download the one that corresponds to your phone. The latest firmware for ZE552KL is WW-14.2020.1708.56:
Zenfone 3 ZE552KL - Download Original ROM
Zenfone 3 ZE520KL - Download Original ROM
2. Download the ROM, put it inside your SD (memory card) and put the SD in ZenFone. If you do not have a memory card, get one!
Install the Original Recovery
1. Download the original recovery for you ZenFone 3. Get the Recovery for the ROM you just downloaded eg. If you downloaded WW-14.2020.1708.56, donwload the corresponding recovery.
Download Original Recovery
2. Download the RootKit zip file that includes fastboot and extract it somewhere: Zenfone 3 Rootkit
3. Copy the recovery.img and boot.img to that folder from the zip you downloaded in Step #1.
4. Turn off your ZenFone 3 and turn on MODE Download (Fast Boot), to do this hold Volume Up + Power Button for 3 seconds.
5. Plug your Zenfone 3 into the computer.
6. In the RootKit folder, hold Shift and right-click anywhere on the screen and select Open Command Window here.
7. The next command will install Recovery Original, type:
Code:
fastboot flash recovery recovery.img
8. Now install the Original Boot, type:
Code:
fastboot flash boot boot .img
9. After that, wait for the success message to hold the power off button until Zenfone 3 reboots;
Installing the Original ROM
1. Turn on Recovery Mode by holding Volume Down + Power Button
2. You will be in the original Recovery.
3. Navigate with the volume buttons to Install update from SD.
4. Select the ROM you downloaded and wait for the installation to finish.
5. Go back and do the wipes
Code:
Wipe Data Factory Reset
Wipe Cache Partition
5. Restart and the Original Zenfone 3 Rom will be installed.
Click to expand...
Click to collapse
Obrigado por dar meus créditos. Mas a pasta do MEGA com o Recovery esta offline. Você tem esses arquivos?
Thanks. But this folder on MEGA is offline. Do you have this files?
is there any way of doing this without and SD Card ?
boot and recovery
https://mega.nz/#F!LIhwiCia!b_pyuHXS9E7f2VbyXcLyXA
Rom
For ZE552KL
http://dlcdnet.asus.com/pub/ASUS/Ze...2.1095520231.1509020682-1437112090.1509020682
For ZE520KL
http://dlcdnet.asus.com/pub/ASUS/Ze...8.1095520231.1509020682-1437112090.1509020682
Link for stock recovery is dead
angeloamorato said:
Link for stock recovery is dead
Click to expand...
Click to collapse
https://mega.nz/#F!LIhwiCia!b_pyuHXS9E7f2VbyXcLyXA
I want to downgrade from latest stock to a previous version. Do I really need to install the recovery from the previous version?
jpeg725 said:
I want to downgrade from latest stock to a previous version. Do I really need to install the recovery from the previous version?
Click to expand...
Click to collapse
yes
I've installed TWRP & donwgraded to Android 6.
Now I want to upgrade to 7.0 because it supports VOLTE... do I really need to rollback twrp to the original recovery?
bibile said:
I've installed TWRP & donwgraded to Android 6.
Now I want to upgrade to 7.0 because it supports VOLTE... do I really need to rollback twrp to the original recovery?
Click to expand...
Click to collapse
yes
Stock recovery not working.
I have changed the ROM to my Asus Zenfone 3 ZE552KL many times. Tried again this morning,and last night.Failed.
Long story,please be patience with me.
- I managed to get the latest ROM from: https://www.asus.com/ro/Phone/ZenFone-3-ZE552KL/HelpDesk_Download/ (actually i got it from the english version) and installed the latest using the stock recovery.
- Previously i had root on my phone by flashing with TWRP, SuperSu. With the latest firmware from the official Asus site, SuperSu is not working anymore. I tried different versions of Supersu (flash versions and app versions) nothing worked. I was unable to get root back on my phone. For me root is very important.
- If i try to install stock rom's using TWRP 3.02. i can't. TWRP 3.0.2 does not recognize my sd-card, i can only copy rom's into internal storage. NO stock rom (even the old ones from 2016) will install on twrp 3.02.
If i install TWRP 3.1.0 or TWRP 3.1.1 i can access sd-card and install all the rom's. Installing is successful but it will boot about 5 times until i get message "your device has failed verification and may not work properly . The device will shutdown in 10 seconds"
- The solution that i found 1 month ago, is to flash stock recovery, and install using stock recovery a stock rom from asus website. I tried to do this last night & this morning. Failed to do so. Reason: no stock recovery works anymore. You can find stock recoveries here : https://www.asus.com/zentalk/thread-88883-1-1.html I also tried to ask for help on that forum, but it won't let me post in that thread.
- I had an old stock recovery, but i lost it. I need a stock recovery that will work. After i flash the stock recovery it gets stuck at "powered by Android" it does not continue from there.
- I can flash back custom TWRP recovery, but even if i install official stock rom it wont boot. I need a working stock recovery, or any solution.
I am stuck . Please help me!