Database Info

Ascend G6- Need Original boot.img For G6-U10

need original boot.img for g6-u10
hey
i was working on boot.img for add TWRP 2.7 Recovery
after i flashed boot.img from here
How to Install TWRP 2.7 Recovery:
TWRP 2.7 works only with the Android 4.4.2 KitKat powered Huawei Ascend P6.
You must have installed Android ADB & Fastboot drivers on your PC. Get the Fastboot folder using the guide.
Once done with the ADB and Fastboot installation, download TWRP 2.7 Recovery.img file.
Rename the downloaded file to boot.img.
Enable USB debugging mode on your Huawei Ascend P6 and connect it to your PC.
Now open the Fastboot folder that you created using our ADB & Fastboot guide.
Press and hold the shift key and then right click on an empty area inside the Fastboot folder, now click on “Open Command Window Here”.
Now in command prompt type “adb reboot bootloader”.
It should reboot your phone into the bootloader mode, now push this command in command window
“fastboot flash boot boot.img”
This will quickly flash the TWRP 2.7 recovery in your device.
Once done, reboot your device.
Boot into recovery by pressing Volume Up or Down Key as soon as you see the Red LED while booting up your phone.
You should see the TWRP recovery interface now.
That’s all with the recovery installation on the Huawei Ascend P6. In case you got any queries or your facing any problems regarding this post, feel free to stop by the comment box below and reach us. Thanks all.
Click to expand...
Click to collapse
phone wont start only fastboot mode
please help me guys to reinstall system again

finally i install cwm on my phone from other topic here
but now only 2 screen 1 the cwm and 2 screen for fastboot mode
now i need to reinstall system like it come from huawei then i try again to install cwm again or it just install once
sorry guys this frist time to edit huawei phones and i try before with samsung and it so easy with it not like huawei phone
im now download G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip
from huawei site to try install it
so guys this way to install G6-U10_V100R001C900B146CUSTC408D004_Firmware_Algeria_Egypt_Jordan_Sudan_Tunisia_Channel-Others_4.3 JB_EMUI 2.0 Lite_05012HLX.zip from cwm is corruct or need download another file to reinstall system?
hope guys help me fast becuze this frist time with huawei phones

any help guys

any help to rest my phone?

you can't install original firmware from cwm, you have to proceed with the included instruction (in zip)

can u give me the firmware to download and flash it
need help guys

Huawei g6 u10
Mount cache fail
Mount data fail
Help us solve this issue please....
---------- Post added at 07:27 PM ---------- Previous post was at 07:04 PM ----------
Need zip files or scatterfile to flash via sp flashtool..
Is it possible to flash p6 rom on g6 via sp flashtool???
Please help us solve this issue.....

[Unofficial] [Recovery] TWRP 3.0.0 For XOLO BLACK

Hello fellow BLACK owners, I know that HIVE has not got an update for a long time and is full of bugs but today I present you guys TWRP 3.0.0 for XOLO BLACK
TWRP 3.0.0 was announced on 5th February, 2016 and the changelog can be found here.
What works?
Everything, as far as I've tested it, everything works fine
Any Bugs?
I haven't found any! If you do, then please report.
How to flash?
Make sure you have unlocked your bootloader, guide can be found here.
Download, install and open Minimal ADB and Fastboot.
Execute adb reboot bootloader and your device will reboot into fastboot mode with the XOLO logo showing up. To ensure that your device is connected execute fastboot devices command and your device should be listed.
Download TWRP 3.0.0 for BLACK and unzip it and then place the "twrp-3.0.0-black.img" file inside the Minimal ADB and Fastboot folder which could be found at C:\Program Files (x86)\Minimal ADB and Fastboot
Now execute fastboot boot twrp-3.0.0-black.img (If you don't want to flash the recovery and want to test it out before you do) and the device will temporarily boot into recovery mode.
If you want the recovery image to be flashed to your device then execute fastboot flash recovery twrp-3.0.0-black.img
Now, to reboot normally, execute fastboot reboot
How to reboot to TWRP recovery?
When your device is booted up normally, you can go to recovery mode via adb reboot recovery command or using third party apps which offer reboot options.
When your device is powered off, you can reboot to recovery by pressing both volume keys at the same time + power key.
NOTE: The tutorial part was a bit copied from here, sorry, I'm a bit lazy hehehe.

thread closed as per OP request
an updated thread here [Recovery] [Stable] TWRP 3.0.2-2 For XOLO BLACK
Dan - forum moderator

Bootloader unlock,Twrp Recovery and Rooting OPPO F1f Easy Guide and Index

Guys im opening this thread on how to unlock Boot loader and flashing twrp in steps clearly...as there are no clear guide to do this in main threads and people can also share things here...Thanks for the devs who are working for us[emoji3]
Thanks and all credit goes to Dev (Uberlaggydarwin) for developing the magic tool (Magictricks.zip) for unlock and initiating development of this device and all I need from you is just clicking thanks button below that's all [emoji12] [emoji12] [emoji12]
Sent from my F1f using XDA-Developers mobile app

Steps: Making bootloader unlockable
Download Magictricks.zip by (uberlaggydarwin) - go to stock recovery- select install from storage- select the downloaded zip- flash or update it.
This will make the boot loader unlockable and brings fastboot to our device...see below how to unlock bootloader through fastboot completely.
Sent from my F1f using XDA-Developers mobile app

Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command in adb shell properly to fastboot and to flash custom recovery...let's begin
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7- Disconnect your oppo f1 and put your phone in fastboot mode(press and hold vol+ and power button} u will see fastboot screen on phone then connect via usb then let the system install bootloader driver....proceed below
7-Then finally Command in fastboot for our device.
Put twrp recovery image(rename as twrp) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb in fastboot mode and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot) command will show 'ok finished' with some like 0.07secs
Type this "fastboot flash recovery twrp.img" then press enter. wait it will flash then command will show 'ok finished' then disconnect and boot in to new recovery.....enjoy
Note - once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...To boot in to twrp recovery command as "fastboot boot twrp.img" press enter
That's it you have unlocked your boot loader and installed twrp recovery successfully[emoji3] [emoji12] [emoji3] [emoji12]
Credits
Thanks to @uberlaggydarwin for developing magictricks to unlock
Download links:
Magictricks by uberlaggydarwin - https://strangebinaries.re/f1f/magictricks.zip
ADB driver installer(optional) - www14.zippyshare.com/v/ufYG71o0/file.html
ADB Folder files-https://drive.google.com/file/d/0B9SasC5iWK5kT1liMlpKRGY3LVU/view?usp=sharing
Twrp recovery for f1f - http://build.twrp.me/twrp/twrp-3.0.2-0-f1f.img

Rooting guide:
After installing TWRP recovery flash this Super Su Stable version and reboot then install super su from playstore if you dont see any icon
Flashable Su Binaries - http://forum.xda-developers.com/showthread.php?p=23427715
Sent from my F1f using XDA-Developers mobile app

reserve

Thankss a lot

drganbds said:
Adb commands for fastboot and flash twrp.
First set up adb shell on your Windows..Download link available below...
Steps to command adb properly please share it somebody[emoji12] ill share once I know and master it
1-Download adb and install adb drivers for oppo f1.
2-extract the files from adb.rar to your c directory in a folder named adb(creat one) or just extract the folder in c directory.
3-once the files are located in c:\adb go to start menu then search for cmd
4-Type in cd c:\adb then click enter
5-Type in "adb devices" it will show the connected devices it should be bunch of numbers
6-If you can't see them it means adb drivers for your device are not installed then install with adb installer
7-THEN FINALY COMMAND some for our device.
Put twrp recovery image(rename as twrp.img) in the same folder where adb is present then tick 'oem unlock' on developer option settings in the device before you continue.
Don't proceed here unless you flash "magictricks.zip" through stock recovery.
Starting Boot loader unlock and custom recovery steps:
Connect your device via usb and command as below..
Type this "fastboot oem unlock" then press enter.(Will wipe your data so backup before you do and wait for reboot)
stucked at waiting for device ( then i press vol + plus power button) command shows Ok finished but nothing happened to device no changes nothing...help please
Click to expand...
Click to collapse

I think you have not installed your adb drivers properly...use pdanet pc version to install otherwise use adb installer which is available in dl.
Sent from my F1f using XDA-Developers mobile app

Guys if u stuck at "waiting for device"
solution - disconnect the device, put it in fastboot mode (press and hold vol+ and power you will see fastboot screen)and connect it again then it will install bootloader drivers and continue. It will show 'ok finished' then u can continue to flash recovery and other stuffs...enjoy[emoji3] [emoji12] [emoji3] [emoji12]
Sent from my F1f using XDA-Developers mobile app

@ teteakholhring. you have done it right go head flashing recovery step.....now u unlocked the bootloader then flash the recovery
Thread re edited please check if u have doubts.

Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!

^^ I've read from other thread that right after you flashed the TWRP recovery image, you must start-up the phone in TWRP recovery first before eventually booting to Android.
I haven't unlock my phone yet though but I will once I see some custom ROMs available.
Sent from my F1f using Tapatalk

x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
All your steps are perfectly right but once u flash the recovery disconnect the phone and switch off from the fastboot then u should boot the twrp recovery first otherwise system will reflash the stock recovery...
Do the recovery flash again and boot to twrp first...
It is not necessary that oem unlock will wipe your data so no worry.

Me too I'm waiting for available alternative roms to install twrp recovery ....I just flashed magictrick and it said that I have update the build.... Thanks sure it will be functional....

x36023x36023 said:
Hi
sorry about my poor English.
I am sure that I flashed magictricks.zip and ticked "OEM unlock"
and the phone is in fastboot mode.
And I typed in "fastboot oem unlock", it showed "Okay, finished",
then I typed in "fastboot flash recovery twrp.img", it also showed "Okay, finished".
Then nothing happen, my phone is still with stock recovery, and my data is stilled there, can someone give me a help?
I attached my cmd picture.
Thank you!
Click to expand...
Click to collapse
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..

teteakholhring said:
Ok you did everything right.. I've attached the picture how i did it.. I was busy solving the same problem.. Remove the usb when it says booting then it will boot into twrp recovery.. Then flash latest supersu..that's it download super user from playstore.. Thre you go.. You got what you wanted..
Click to expand...
Click to collapse
Ya right guys...Please check this thread's main page everything was written clearly for how to do it correctly...enjoy
Sent from my F1f using XDA-Developers mobile app

hoping someone will upload a video on how to properly root our device.

wakaranay said:
hoping someone will upload a video on how to properly root our device.
Click to expand...
Click to collapse
What doubt you have? I'm here to clear it all and every steps are clearly explained in the main page...
Sent from my F1f using XDA-Developers mobile app

thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why

x36023x36023 said:
thank you for all your help
I made my phone rooted
but when I forced to delete original apps like original browser
and reboot
all the things on home page will disappear
when I delete original browser only
it still happened
this never happened on my other Sony device
can anyone tell me why
Click to expand...
Click to collapse
Use root app delete from playstore or manually remove .apk file along with .odex file...
Sent from my F1f using XDA-Developers mobile app

Unbrick Huawei P9 Eva-L19 - 100 % Working

1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone

Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
its not working for me

rohitgohan said:
its not working for me
Click to expand...
Click to collapse
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .

Arnys said:
Jeah, this metod will not work to anyone, who have locked bootloader.
But, there is bug, when bootloader is unlocked (atlest in fastboot its shows that its unlockd), but realy its locked.
Why there are this bug? i dont know, but its happen when someone try with dload method to fix phone, or when with twrp recovery are flashing official nuget zip. In developer options there are turned of option "alow to unlock bootloader", and thats reason why cant flash with fastboot thease img files.
So, at the end, this method will work only in certain circumstances, and not for everyone who bricked phone, due this bug .
Click to expand...
Click to collapse
I have unlocked bootloader i even flashed .imgs through fastboot but no use

Rakhib.Mistry said:
1. Turn of your phone
2. HOLD volume Down & connect to your pc
3. Extract your firmware via Huawei UPDATE Extractor Software [ Extract Boot , Recovery & System Only ]
Software Link - https://forum.xda-developers.com/att...6&d=1481543154
4. DOWNLOAD SRK TOOL
Link - https://www.androidfilehost.com/?fid=23991606952598964
5. Copy Boot , Recovery & System AND paste into Srk Tool FOLDER (Don't paste into any FOLDERS)
6. DOWNLOAD ADB & Fastboot
Link - https://docs.google.com/file/d/0B2gh...dBR3VkRlE/view
Open ADB & Fastboot FOLDER
7. HOLD Shift Key & Right Click on FOLDER of ADB & Fastboot
8. Click on OPEN COMMAND WINDOW HERE
9.Type
Fastboot flash boot BOOT.img
Than press Enter Key & again type
Fastboot flash recovery RECOVERY.img
Than press Enter Key & again type
Fastboot flash system SYSTEM.img
Than press Enter Key & again type
Fastboot reboot
I'm sure sure it's will work 100% also work on any Huawei Phone
Click to expand...
Click to collapse
Thanks bro it work for me..?

Bro my phone is locked and it is rooted then how to unbrick it Huawei y6 scl-l21 region middle east

P9 eva l19 dead after flash
Please Help..
Br..
p9 eva l19 flashing with sigma.
Done. Ok.
Now dead. Press only vibreting. No connecting with
Computer. Please help..
Its urgent...
Thanks a Lot.....!!!

Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC

kazshizka said:
Quick question, I bricked my phone when I did a factory reset and deleted internal storage and accidentally deleted important files while doing so. I flashed a stock update from the warehouse and completely deleted the system instead. I then flashed Lineage ROM which reinstalled the system but now causes me to get stuck in bootup. When I installed Lineage ROM, I got the following error.
Attached photo
https://imgur.com/a/nx6U5bC
Click to expand...
Click to collapse
Download the FULL OTA files on the last approved update you were and flash via HuRupdater method.
If you are on the Chinese variant, you can flash stock recovery via fastboot and then download firmware from there on.

cant you just restore your nandroid backup?

blitzball said:
cant you just restore your nandroid backup?
Click to expand...
Click to collapse
Not on Oreo because TWRP does not support encryption and thus cannot backup/restore Data partition

TWRP recovery menu not showing

hi, im new in this android arena and this is my first time using smartphone so please forgive my noobness.
i want to root my phone Xiaomi Redmi 5A and i follow some tutorial on youtube where he told to use Minimal ADB & fastboot, TWRP, lazyflasher noverity and lastly Magisk.
im flashing my phone using this command on ADB:
fastboot devices
fastboot flash recovery twrp.img
fastboot reboot
i guess this is it so im rebooting my phone to get into twrp recovery mode by pressing volume up+power but it showed xiaomi stock recovery instead not twrp recovery.
so what i do wrong that i cannot get into twrp recovery menu?
please help me

Don't type fastboot reboot command after flashing, reboot to recovery manually

StillrunsKK said:
Don't type fastboot reboot command after flashing, reboot to recovery manually
Click to expand...
Click to collapse
i type that command after the first try not working (without fastboot reboot command)
it still gave me the same problem even not typing fastboot reboot command

Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.

StillrunsKK said:
Is the TWRP flash successful?
Ensure that your mobile drivers are installed properly on your pc and that you've enabled USB debugging.
Now after connecting your device to the computer :
1)open adb
2)type adb devices, if it shows a serial number then proceed
3)adb reboot bootloader
4)fastboot flash recovery xxxx.img
After this, remove the USB and reboot to recovery by Holding the appropriate combination of keys.
If you reboot your device first, and then power off and reboot to recovery, you will still get stock recovery.
Click to expand...
Click to collapse
Ensure that your mobile drivers are installed properly
Click to expand...
Click to collapse
i dont know where to find this drivers
i've enable the usb debugging
and while flashing it didn't gave any error

im using adb from this thread https://forum.xda-developers.com/showthread.php?t=2317790
where it didn't show any devices when typing adb devices but it showed my devices when typing fastboot devices