PRE-ROOTED STOCK KERNEL FOR N910C/H (ONLY)
Using this kernel will trip your KNOX Warranty Void flag. Use it at you own risk.
FEATURES:
- Stock TW Kernel,
- Build from COH4 sources,
- COJ5 compatible,
- SELinux Permissive,
- Pre-rooted,
- BusyBoxed,
- KNOX totally disabled,
- Init.d support added,
- Fixed battery capacity calculation for custom batteries,
- Battery life improvements,
- Secure Storage disabled to allow Private Mode and S Health usage.
ROOT HELP:
This kernel installs and configures all SU obligatory files. That gives you unlimited access to root privilages. Because of space limitations I couldn't attach SuperSU apk which lets you control su binaries. Just install it manually from Google Play - SuperSU. (Of course root works also without it, but it is not secure solution).
PRIVATE MODE HELP:
After installing this kernel, Private Mode is no longer accessible, if you had configured it before. Remember to copy all your files you've put into it before modifying system (eg. by flashing custom kernel or rooting). If you cannot open Private Mode anymore, just follow my instructions here: How to fix Private Mode in Samsung Galaxy and perform given steps to make it work again.
THANKS:
- Chainfire for his great SuperSU app.
- Stericson for BusyBox binaries
XDA:DevDB Information
Shreqg2 Kernel, Kernel for the Samsung Galaxy Note 4
Contributors
Shreqg2
Source Code: https://drive.google.com/file/d/0B33S4SdD8nuKZEJUX3FmcDloekU/view?usp=sharing
Kernel Special Features: KNOX fully disabled, Pre-Rooted, BusyBoxed, SELinux permissive, init.d support added
Version Information
Status: Stable
Current Stable Version: 1.4
Stable Release Date: 2015-10-03
Created 2015-09-20
Last Updated 2015-11-11
CHANGELOG:
03.10.2015 (v1.4):
- fixed battery capacity calculation for custom batteries
- battery life improvements
25.09.2015 (v1.3):
- auto-root fixed to allow future SuperSU updates
- changed "deKNOXing" instructions to work properly with new COI4 ROM
- removed unused files
- more small code improvements
23.09.2015 (v1.2):
- auto-root instructions rewritten to fix bootloop issues
- added root files verification on every reboot (no performance impact)
- added automatic busybox installation
22.09.2015 (v1.1.2):
- improved some root instructions
21.09.2015 (v1.1):
- auto root implementation added
- some scripts performance improvements
20.09.2015 (v1.0):
- initial release
DOWNLOAD:
v1.4:
TAR: COH4.KERNEL.Shreqg2_1.4.tar.md5
ZIP: COH4.KERNEL.Shreqg2_1.4.zip
HOW TO INSTALL:
- download TAR file and flash it with ODIN
OR
- download ZIP file and flash it with TWRP/CWM
Interesting , let's try it
Thanx and good luck.
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
Tar ?? is it odin or TWRP flashable ??
It is ODIN flashable file. I will upload TWRP/CWM zip soon.
--------------------------------
Done!
Thanks buddy .installed and rooted it .no problem so far.
Working fine , thanx and good luck in adding more features .
Uploaded new version (1.1). Now it's pre-rooted and a little more stable.
Is this supposed to root my GN4 or I misunderstood?
Causes I installed it and...
Sent from GN4
bryanstevecl said:
Is this supposed to root my GN4 or I misunderstood?
Causes I installed it and...
Sent from GN4
Click to expand...
Click to collapse
perfectly working on me. ThAnks dev!
Sent from my SM-N910C using Tapatalk
bryanstevecl said:
Is this supposed to root my GN4 or I misunderstood?
Causes I installed it and...
Sent from GN4
Click to expand...
Click to collapse
Try new 1.1.2 version. I've changed some root instructions on it. Should work better than previous one, but remember that sometimes you have to reboot twice manually to let it properly root your device.
Can I try on my N910H?
Yesterdaty I have flashed 5.1.1 ROM via ODIN, I haven't yet rooted, shall I try this via ODIN.
As i can see, most of kernels for N910C works fine with N910H, but I have no N910H to test it. You can try and tell here if it works or not. If doesn't, just flash your previous kernel to make your phone work properly again.
And yes, if you flash my kernel with ODIN it will root your device automatically after reboot (or two)...
Hi Shreqg2, I tried to flash on a stock 910c, result is bootloop, any way to get out of this? You dont need to downgrade bootloader right?
This kernel is working with the newest 5.1.1 ROM (COH4) and on the newest bootloader as well. As long as you are using this ROM there should be no problems or bootloops. If you are using this version of firmware then try to download and flash the file again. I suggest you to choose ODIN flashable "tar" file because it has md5 checksum which is always verified before file is flashed to the phone.
Thanks for your response, I will try to download the file again. For some reason this is the format of the file when i download COH4.KERNEL.Shreqg2_1.1.2.tar.tar
BTW, what version of odin did you use? still the same on my end
Tested on Odin 3.09 and 3.10
---------- Post added at 02:40 AM ---------- Previous post was at 02:28 AM ----------
After I flashed, it will boot, but when i check for root checker, it is not rooted, then when i restart, it doesn't boot anymore, just bootloop. Will try again later with the original usb cable
Try previous version - 1.1 please.
Shreqg2 said:
Try previous version - 1.1 please.
Click to expand...
Click to collapse
Tried v1.1, no bootloop but still no root, restarted twice now, any idea? thanks
fatbuccha said:
Tried v1.1, no bootloop but still no root, restarted twice now, any idea? thanks
Click to expand...
Click to collapse
Just the same here
Sent from GN4
ok, pre-root doesn't work as I expected. I will try to repair it and reupload files. until it's done you can use v 1.0 and root your device normally .
Related
Important notes for Developers / ROM Chefs !!!
This ROM is NOT based on any other custom ROM. My work contains many original ideas and innovations that I introduced as the first in the ROM development (see "Changelist" in post #2). Of course, it does not mean that I do not need to thank anyone - there are a lot of people who helped / inspired me anyhow (see "Credits").
I will risk the statement that at this moment my "DevBase" is the most tuned and nuanced custom ROM available at XDA Forum
I agree to use any part of my work to create other custom ROMs, but it would be great if you add me to the credits
Hello
I have decided to create a pure base, which can be a pattern for ROM Chefs (not only for beginners) ROM is initially safe de-bloated (read below what does it exactly mean), but all features are present and works!
ROM can be installed by normal users as well. If you like a little de-bloated ROMs, clean, but with all working features - there is no better alternative I think
ROM contains my extended CSC package, which I called G900FDAXX (this is a combination OXE, OJV + some additional). Final list of available CSC is as follows:
CAC, CAU, ECT, ILO, KSA, LEB, LYS, SEK, SER, SKZ, THR, TMC, WTL, XEO, XSG
NEW !!! I present you new, unique option: "Keep current CSC", so you can install my DevBase keeping your original CSC. My DevBase contains all possible CSCs from G900FD variant so there is no need to worry about it
How does it work? This option detects your current CSC and automatically applies it during install.
NOTE: Do not use so called "Superwipes" and/or additional /system formats, otherwise "Keep current CSC" option will not work properly. Please read THIS for explanation.
How can I check my current CSC?
Install Phone INFO app from Play Store and check your CSC. If you are using stock ROM and everything is ok with your CSC - all CSC fields in Phone Info app should display the same CSC, as below (otherwise, you probably forgot about wipe data when you were installing ROM with another CSC).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How can I change my current CSC?
Q: Recently I tested several ROMs, in result of it my CSC has changed. I would like to install your DevBase, but first I want to restore my country's original CSC. What should I do?
No special/additional steps are needed. Just install my DevBase with edited options.prop file placed on internal sdcard or extSdCard -> type CSC=[your_csc] instead of CSC=KCSC. Remember to perform "Wipe data" in the recovery before install. Note that sometimes additional reboot is required after completing pre-configuration steps to display your CSC correctly in Phone Info app).
ALEXNDR.G900FDXXS1CQD1:
1. Base:
- Odexed (original stock files) + stock kernel
- Multi CSC (list of natively supported CSC as above) (*)
- Removed SecurityLogAgent (annoying on rooted phones)
- Rooted systemlessly (Magisk v13 or SuperSU 2.82) (*)
- All original features are present and works
- No visual changes (100% stock look)
- Safe De-Bloated (more info below)
What does it mean and why is it called "safe"?
- ONLY apps available in stores are removed from DevBase, so you can easy (re)install any of these app if you like
- ONLY pre-installed system apps are removed, DevBase installer never touch any updated app nor app installed manually from store
Thus, the following conclusions can be drawn:
1. If you install my DevBase directly over stock ROM without performing "Wipe data" - in most cases almost all these apps will remain untouched, because almost all apps have been updated already (stored on /data). But then you will be able to remove any useless app using the "Application manager", like any other app. Removed manually app will not appear again until you use my DevBase while updating.
2. If you perform "Wipe data" while installing my DevBase - then all apps listed below will be removed. If you would like to use any of these apps - just install it manually from appropriate store. Installed manually app will not be removed during the next DevBase update.
Removed apps list:
ChatON
Chrome
Drive
Dropbox
Flipboard
Google+ / Photos
Group Camcorder
Group Play
Hangouts
Play Books
Play Games
Play Movies
Play Music
Play Newsstand
Smart Remote
2. Modded systemlessly - contains SYSTEMLESS DevBase
- All mods known from previous DevBase versions (up to v3.x) are applied systemlessly - all modified files (including modded apps) are placed in /data/devbase/system instead of physical /system partition. Mods section (#4) has been updated to install mods to /data/devbase/system/(priv-)app if systemless DevBase has been detected (otherwise will be installed as usual, to /system). Init.d support has been removed as it is deprecated (use post-fs-data.d or su.d instead). For more information, guides, tips & tricks - see SYSTEMLESS DevBase.
(*) - these options can be controlled by editing options.prop file (you can find such file in ZIP's root directory). Just place modified options.prop file (use e.g. Notepad++ to edit) in the root directory of internal emulated scdard (/data/media/0) or extSdCard (recommended if you plan to format internal emulated sdcard) and then start the installation. More info below:
#
# DevBase by ALEXNDR (_alexndr @ XDA)
#
# Configuration file to allow customize the installation.
#
# File inside the ZIP installer is just for reference - please do not modify it!
# If you want to change some options listed below - copy this file, then edit it using
# e.g. Notepad++ (do not use Windows Notepad!), then place your modified options.prop file
# in the root directory of internal emulated scdard (/data/media/0) or in the root directory
# of extSdCard (recommended if you plan to format internal emulated sdcard) and then start
# the installation.
#
# TIP: You do not need to repeat this step every next update I will release. As long as your
# customized options.prop file is present in the (ext)SdCard - future DevBase installers will
# "read in your mind" that you want to install with such options again.
#
# I agree to use any part of my work to create more advanced custom ROM,
# but it would be great if you add me to the credits
# Enable root access with the selected method. Allowed values:
# magisk - install Magisk & MagiskSU as root solution (default)
# supersu - install SuperSU as root solution, without Magisk
# noroot - do not root device (NOTE: you will get unmodified ROM!)
root=magisk
# CSC Selection. Allowed values:
# KCSC - Keep current CSC, recommended in most cases (automatic selection or copy your current CSC contents).
# You can force the use of natively supported CSC by typing (use UPPERCASE!): CAC, CAU, ECT, ILO, KSA, LEB,
# LYS, SEK, SER, SKZ, THR, TMC, WTL, XEO, XSG
CSC=KCSC
NEW !!! Starting from DevBase v3.0 there is a new customization method - you can change frequently switched root options just by renaming installer's ZIP file name (instead of editing options.prop file). Currently supported "strings" in the file name: "magisk", "supersu", "noroot":
Case 1 (default) - install the ROM with Magisk & MagiskSU as root solution
(just flash ZIP file "as it is")
Case 2 - install the ROM with SuperSU as root solution, without Magisk
(place "supersu" string anywhere in the ZIP file name, e.g. "G900FDxxx_DevBase_v4.x_supersu.zip")
Case 3 - do not root device (NOTE: you will get unmodified ROM!)
(place "noroot" string anywhere in the ZIP file name, e.g. "G900FDxxx_DevBase_v4.x_noroot.zip")
Installation:
CWM / TWRP recovery (KNOX 0x1) - open file using "Install (Zip)" option and confirm operation. If you want to perform "clean install' - perform "wipe data/factory reset" BEFORE flashing Zip! I highly recommend you to update bootloader/modem also to the newest versions available in post #3, to avoid potential bugs/issues.
Wipe data is NOT required if you are coming from stock ROM or a previous version of my DevBase (if you leave "Keep current CSC" option untouched in /options.prop or if you choose same CSC as you are currently using). In other cases - wipe data is highly recommended!
I do not recommend using any additional superwipes or formats before install my DevBase (my installer cleans your system well enough!).
Credits:
@Chainfire for systemless SuperSU and a lot of inspiration
@topjohnwu for Magisk, Xposed, another inspiration & some binaries used separately
@wanam for Xposed framework used in older DevBase versions
@amarullz for Aroma Installer used in older DevBase versions
@svadev & @_riddle for deodexed tools/binaries used in older DevBase versions
Hit Thanks button if you like my work. If you really appreciate my work - feel free to buy me a beer
DOWNLOADS
Download ROM:
>> G900FDXXS1CQD1_DevBase_v4.3.zip << (Android 6.0.1, updated Jul-04-2017, more info in post #300)
>> Recent ROM versions for SM-G900FD <<
Note:
Check MD5 sum BEFORE flash (useful TOOL), because flashing damaged or incomplete ZIP files could (soft) brick your phone! Correct MD5 sum is shown on the AndroidFileHost website while downloading.
Changelog
v4.3 (starting from G900FDXXS1CQD1 DevBase):
- "root.supersu" & "root.magisk" variables in the options.prop file have been replaced by one "root" variable (dropped possibility to install both -
SuperSU & Magisk - due to the fact that Magisk v13+ does not support SuperSU as root solution)
- SYSTEMLESS DevBase updated to v1.9 (see changelog HERE)
v4.2 (not released for G900FD):
- Added possibility to add systemlessly NEW apps to /data/devbase/system/(priv-)app (up to 5 apps in "app" & 5 apps in "priv-app"). The only condition is that you need to rename its directories to CustomApp[1...5] (e.g. CustomApp1, CustomApp2, etc..). These apps will remain even if you flash a new DevBase as corresponding dummy directories will exist in future DevBase updates
- In case of DevBase update or re-installation - installer will not remove your custom entries in /data/devbase/system/build.prop and in *.xml files placed in /data/devbase/system/csc
- SYSTEMLESS DevBase updated to v1.6 v1.8 (see changelog HERE)
v4.1 (not released for G900FD):
- Added full Magisk support - MagiskSU is now default root solution (ROM should pass SafetyNet with Magisk Hide enabled in settings)
- Since systemless Xposed does not need to be re-installed every new DevBase I will release (in case of using the same root solution) - it makes no sense to keep it anymore as installation option
- SYSTEMLESS DevBase updated to v1.5 (see changelog HERE)
v4.0 (not released for G900FD):
- A huge step in the systemless direction! DevBase installer now installs pure odexed stock ROM (just slightly debloated), then systemless SuperSU, then systemless DevBase, then (optionally) systemless Xposed
- All Knox related applications are available again (except SecurityLogAgent, to prevent annoying security alerts)
- Fake KNOX 0x0 status (check it in PhoneINFO app) - most of Knox related apps should work again, like in case of untouched KNOX flag
- All mods known from previous DevBase versions (up to v3.x) now are applied systemlessly - all modified files (including modded apps) are placed in /data/devbase/system instead of physical /system partition. Mods section (#4) has been updated to install mods to /data/devbase/system/(priv-)app if systemless DevBase has been detected (otherwise will be installed as usual, to /system)
- Deodex on-the-fly feature has been removed. If you really need deodexed ROM - you can install someone else's deodexed ROM, then systemless DevBase as an overlay
- Init.d support has been removed as it is deprecated (use su.d instead)
v3.8 (starting from G900FDXXS1CPH1 DevBase):
- Added hexpatch to root_from function (support for SM-N930x, thanks to @Chainfire)
v3.7 (starting from G900FDXXU1CPF4 DevBase):
- Another major improvement/bugfix in deodex_from function (full support for 64 bit OS)
v3.6 (starting from G900FDXXU1CPE1 DevBase):
- Major improvement/bugfix in deodex_from function (added "-g" switch to zip command - finally no issues in case of deodexed Android 6.0.1)
v3.5 (starting from G900FDXXU1CPE1 DevBase):
- Improved root_from function (Android 5.1+) - added "setprop selinux.reload_policy 1" removal from init.rc (thanks to @Chainfire)
- Fixed bug in new alghoritm for checking whether stock recovery should be installed or not (introduced in v3.4)
- Added new functionality - installer will store a copy of patched stock kernel in /data for those who flashed custom kernel but for some reasons want to revert to the stock kernel (Android 5.1+)
v3.4 (not released for G900FD):
- Completely changed alghoritm for checking whether stock recovery should be installed or not (it applies to FlashFire users). Now it depends on previously used recovery (instead of checking KNOX flag which was not 100% reliable across devices/recoveries)
v3.32 (starting from G900FDXXU1CPE1 DevBase):
- Updated set_csc, kcsc_backup, kcsc_restore functions to support more devices
- Updated partition detection algorithm to support more devices
- Fixed path to options.prop file placed in external sdcard in case of updating Marshmallow while using FlashFire
- Minor intaller's optimizations/bugfixes
v3.31 (not released for G900FD):
- Potential fix for reported problems with root (rare cases)
v3.3 (starting from G900FDXXS1BPD3 DevBase):
- Improved method of reading options from ZIP file name (previous was directory/path sensitive also)
- Added support to mod_csc function for other than UNIX text format (it's a little ridiculous, but in case of some CSCs - original /system/csc/other.xml file has Windows or MAC text format!)
- Initial support for options.prop file in CRLF text format (DOS/Windows)
v3.21 (not released for G900FD):
- Fixed installer's issue if there is a [space] present in ZIP filename or a directory containing DevBase (see #1728)
v3.2 (not released for G900FD):
- Another improvements in add_initd function (details - see v1.3)
- Improvements in set_perm, set_perm_rec and root_from functions (recovery-independent structure)
- Improvements in deodex_from function related to Android MM
- New get_con function in the main sh script (useful for devs)
- BusyBox updated to 1.22.1 (bionic) [no, this is NOT a mistake!]
- Minor intaller's optimizations/bugfixes
v3.1 (not released for G900FD):
- Significantly improved "add_initd" function in the update-binary shell script. Added support for (probably) all available Samsung's platforms (e.g. Exynos) and all available firmwares (based on Android 4.4+)
- In case of installation with Xposed framework installer checks if Xposed Installer app is present in /data/app and installs it automatically if necessary
- Minor intaller's optimizations/improvements
v3.0 (starting from G900FDXXS1BPC3 DevBase):
- Entire installer has been re-written from the scratch! All "magic" moved to update-binary which is a shell script. It opens up new possibilities never possible before!
- Introduced new customization method - you can change most frequently switched options just by renaming installer's ZIP file name. Currently supported "strings" in the file name:
"noroot" (means "do not root"), "deodex", "xposed", "initd" (no other comments are required, I hope..)
- Starting from v3.0 init.d support is disabled by default
v2.3 (not released for G900FD):
- Added option to install suitable Xposed framework in one step while installing DevBase (for maximum comfort). There is a new xframework.sh script - device independent structure and full Android 5.1+/6.0+ support. Backup method is compatible with well known Xposed uninstallers (tested with @wanam's)
v2.2 (not released for G900FD):
- Significantly improved root_supersu.sh script - device independent structure and full Android 5.1+/6.0+ suport including on the fly kernel/ramdisk/sepolicy patching if necessary. SU binaries are still copied to /system as it is the best choice in case of custom ROMs
- Changed order of performed operations in the updater-script due to new root_supersu.sh script advantages
- Installer wipes partitions designated for RAW content (e.g. kernel / recovery image) before writing to them
- Minor additions in dex_injector.sh script related to Android 6.0+
v2.11 (not released for G900FD):
- Fixed some minor installer's issues ("set_perm" function in set_csc.sh did not work correctly while using wildcards in the path (it was exclusively FlashFire issue! no problem with TWRP / CWM). Fortunately - only /system/etc/csc_*.txt were really "affected" - it didn't cause real issues as these files are empty)
v2.1 (not released for G900FD):
- As some people felt a bit disapointed / worried about DevBase v2.0 ROM file size - finally I have decided to debloat stock system.img (in same way as in v1.x => "Safe De-Bloat") and remove option to install all available bloatware. ROM file size has been reduced from about ~1.6GB to about ~1.3GB. Note for Devs / Chefs: Do not use Windows tools - you need Linux with "selinux" package installed (to handle SELinux contexts) to mount (rw) system.img safely. If you want to add / change any system content this way - remember about proper chown/chmod/chcon
- Added device check during install as flashing directly to EMMC block is potentially more risky for "other" devices. Installer will abort installation if device is not N910F (trlte(xx)). If you want to try this ROM on other N4 devices - you need to remove this check manually from updater-script (it is more conscious procedure)
v2.0 (not released for G900FD):
- Completely new concept of ROM development that makes it easy to build most tuned and nuanced custom ROMs. No more arduous manual analysis or (often) invalid permissions / SELinux contexts taken from a kitchen. The main idea is to flash original, stock /system image as EMMC block (in same way as PC Odin does) instead of extracting ZIP's contents to mounted partition, then setting permissions, then creating symlinks, etc. However, it requires more knowledge related to sh scripts as ALL necessary changes need to be done on the fly, while installing (e.g. by injecting modified classes.dex and/or modified images/xmls to /res/../* into an apk). There are no limits, all depends on your creativity!
- One common ZIP installer for Odexed and Deodexed ROM - you can control it by new "deodexed.rom" entry in options.prop (there is new dex_injector.sh script which can deodex on the fly the whole ROM using previously processed classes.dex files)
- ROM is still Safe De-Bloated by default but removing bloatware during install is not mandatory - you can control it by new "safe.debloat" entry in options.prop (there is new protection included to avoid overfilling /system in case of large size of additional MODs and/or large multi CSC package)
- Major improvements in csc_detect.sh script - it is able to detect previous CSC even in cases of flashing over e.g. CM based ROM and/or previously formatted system partition. However, if detected CSC is NOT included in my multi CSC package, in both mentioned cases it is still not possible to keep detected CSC (as there is no CSC related content to backup / restore)
- Improvements in all sh scripts - additional "metadata" entries in updater-script (related to processed contents) are not required
- Improvements in root_supersu.sh script - it is suitable for 32 and 64 bit OS
- Added full zip support from the command line
v1.x (initial version, further improvements, up to G900FDXXU1BOJ1 DevBase):
- Built without using a kitchen. All set_metadata* / symlink entries are result of arduous manual analysis. For more info about the method - see hidden content for Devs / Chefs in THIS thread.
- New customization method without using Aroma (options.prop)
- Many useful scripts for easy installation: CSC applying/autodetection, backup/restore of security files, backup/restore of existing CSC package, XML modding on the fly, root, init.d support
- Many small changes and improvements "in the meantime" which I simply do not remember...
- Safe De-Bloated (see post #1 for details)
DOWNLOADS
Useful PC Odin flashable files:
>> Recent bootloader versions for SM-G900FD <<
>> Recent modem versions for SM-G900FD <<
>> Recent kernel versions for SM-G900FD <<
(suitable kernel is already included in my ROM)
Note:
To update bootloader and/or modem you have to power off the phone, wait min 10 seconds and then go directly to Download Mode using Vol_down+Home+Power key combination. Load bootloader using BL button and/or modem using CP button in PC Odin. Push "Start".
DOWNLOADS
Optional MODs
I put some of my favorite MOD's - especially for normal users who want to use my rom - as it is. These modifications I have done personally using (bak)smali tools - these are NOT "borrowed" from other custom rom, nor from someone else's thread (thanks to @majdinj & @tdunham for their excellent modding guides). All files are TWRP / CWM / FlashFire flashable ZIPs:
1. Modified Camera app:
- Full functionality of the Camera app in low battery
2. Modified Phone app:
- Disabled increasing ringtone
3. Modified Messages app:
- Disabled SMS to MMS auto-converting
- Increased SMS/MMS recipient limit (10 -> 1000)
- Increased SMS/MMS hour limit (100 -> 1000)
- Disabled SMS / MMS log history in call logs
- Disabled SMS delivery notifications (*)
(*) If you long press a message you can still check if the message has been delivered or not, we do not need to see and hear notifications for every sms. It's annoying to me!
>> MODs for G900FD (Marshmallow) <<
>> MODs for G900FD (Lollipop) <<
In case of MODs installed to /system - you can restore original apk using backup stored in /data/backup/alexndr
Nice work
Have you found much difference between the G900F and G900FD firmwares?
For example, would it be easy enough to patch a F firmware to work on FD?
Only FD S5???
djb77 said:
Nice work
Have you found much difference between the G900F and G900FD firmwares?
For example, would it be easy enough to patch a F firmware to work on FD?
Click to expand...
Click to collapse
No, it's not easy as FD kernel and many FD apps have some special features included to support dual sim (e.g. Messages app from G900F works with G900FD but doesn't recognize many dual SIM operations).
core720 said:
Only FD S5???
Click to expand...
Click to collapse
I have no experience with MD variant. I bought G900FD variant 3 days ago
Maybe it is enough to replace the kernel and the modem to work properly in Brazil...
_alexndr said:
No, it's not easy as FD kernel and many FD apps have some special features included to support dual sim (e.g. Messages app from G900F works with G900FD but doesn't recognize many dual SIM operations).
Click to expand...
Click to collapse
Cool, thanks for that info. If it was possible I would integrate FD support into TGP, but it doesn't sound as easy as the other variants.
alexndr Thank you for your work
deodexed clearance
_alexndr said:
Download ROM:
>> G900FDXXU1BOF1_DevBase_alexndr.zip << (Android 5.0, updated Jun-27-2015)
>> Recent ROM versions for SM-G900FD <<
Note:
Check MD5 sum BEFORE flash (useful TOOL), because flashing damaged or incomplete ZIP files could (soft) brick your phone! Correct MD5 sum is shown on the AndroidFileHost website while downloading.
Download Deodexed ROM:
Note:
Deodexed ROM might be potentially less stable due to performing additional actions using tools that are still under early development (thanks to @_riddle & @svadev). If you do not know why do you really need deodexed ROM then it means you do not really need it! Please do not report bugs without the information that you are using deodexed version.
>> Recent Deodexed ROM versions for SM-G900FD <<
Click to expand...
Click to collapse
Finally some new action abt this awesome phone, so 1st of all let me say thank you!!!!
Second, I just want to clear something about the deodexed version of this rom. You said might be unstable due....
Unstable ight come from the fact that you have used those scripts to deodex it? Or due the fact that some apps might not work on deodexed roms? im a bit confused abt that afirmation.
Anyway Im downloading both versions for testing and I will try to use them for couple of days before posting up again for info.
chasemyass said:
Finally some new action abt this awesome phone, so 1st of all let me say thank you!!!!
Second, I just want to clear something about the deodexed version of this rom. You said might be unstable due....
Unstable ight come from the fact that you have used those scripts to deodex it? Or due the fact that some apps might not work on deodexed roms? im a bit confused abt that afirmation.
Anyway Im downloading both versions for testing and I will try to use them for couple of days before posting up again for info.
Click to expand...
Click to collapse
Testing started...
I was on android 4.4.2 as you can see from my BB from screenshot and used FlashFire to flash the odexed version and all my installed apps remained, but (there is always a but isnt it? ) phone was working in slow motion and the google didnt wanted to upgrade play services since i was coming from an older version (didnt received any error) so my next logical reaction was tdo a factory reset from recovery.
After that everythings works awesome so far. I will keep you guys updated if anything needs to get noticed here.
Congratz again and ty for this rom
Sent from my SM-G900FD
chasemyass said:
Finally some new action abt this awesome phone, so 1st of all let me say thank you!!!!
Second, I just want to clear something about the deodexed version of this rom. You said might be unstable due....
Unstable ight come from the fact that you have used those scripts to deodex it? [...]
Click to expand...
Click to collapse
Yes, exactly As I have mentioned already - these tools are under early development. Potentially problems may occur but not necessarily
BTW - I'm on deodexed for 3 days (just for testing) - no problems so far
chasemyass said:
Testing started...
I was on android 4.4.2 as you can see from my BB from screenshot and used FlashFire to flash the odexed version and all my installed apps remained, but (there is always a but isnt it? ) phone was working in slow motion and the google didnt wanted to upgrade play services since i was coming from an older version (didnt received any error) so my next logical reaction was tdo a factory reset from recovery.
After that everythings works awesome so far. I will keep you guys updated if anything needs to get noticed here.
Congratz again and ty for this rom
Sent from my SM-G900FD
Click to expand...
Click to collapse
I highly recommend you to update BL / CP also (note that BL / CP contains also a part of radio firmware -> NON-HLOS.bin / modem.bin).
It is not good combination: Lollipop ROM + KitKat baseband (NON-HLOS+modem)
_alexndr said:
Yes, exactly As I have mentioned already - these tools are under early development. Potentially problems may occur but not necessarily
BTW - I'm on deodexed for 3 days (just for testing) - no problems so far
I highly recommend you to update BL / CP also (note that BL / CP contains also a part of radio firmware -> NON-HLOS.bin / modem.bin).
It is not good combination: Lollipop ROM + KitKat baseband (NON-HLOS+modem)
Click to expand...
Click to collapse
Hmm I will try, but if I will do that, will I loose root? And what will be so problematic regarding kk bb with lp rom cooked over? No need to explain, just pass a link so I can see by myself. Thx
Sent from my SM-G900FD
chasemyass said:
Hmm I will try, but if I will do that, will I loose root? And what will be so problematic regarding kk bb with lp rom cooked over? No need to explain, just pass a link so I can see by myself. Thx
Sent from my SM-G900FD
Click to expand...
Click to collapse
No, you will not lose root
There were a lot of problems reported in G900F in case of using the newest firmware + an older modem/baseband (e.g. lost of wifi passwords every reboot).
I'm not sure if there are same problems in G900FD, but devices are very similar so could be...
_alexndr said:
No, you will not lose root
There were a lot of problems reported in G900F in case of using the newest firmware + an older modem/baseband (e.g. lost of wifi passwords every reboot).
I'm not sure if there are same problems in G900FD, but devices are very similar so could be...
Click to expand...
Click to collapse
I will test and report here then. As I will test a bit more with this setup... Thank you mate!
EDIT: Bug confirmed. Wifi psswd lost after reboot when using KK baseband, duh!
Sent from my SM-G900FD
thanks for this rom
I found one bug on deodex version
when I set alarm and turn it off the alarm icon still appear on statusbar
chasemyass said:
I will test and report here then. As I will test a bit more with this setup... Thank you mate!
EDIT: Bug confirmed. Wifi psswd lost after reboot when using KK baseband, duh!
Click to expand...
Click to collapse
So please update bootloader + modem to the newest version (BOF1 + BOE2) and should be ok
iNTER5LOve said:
thanks for this rom
I found one bug on deodex version
when I set alarm and turn it off the alarm icon still appear on statusbar
Click to expand...
Click to collapse
Strange, no problem here on deodexed. Try to backup your apps & data and then perform wipe data / factory reset from recovery
(note that deodexed version needs about 10 minutes for first boot after performing wipe data)
_alexndr said:
So please update bootloader + modem to the newest version (BOF1 + BOE2) and should be ok
Strange, no problem here on deodexed. Try to backup your apps & data and then perform wipe data / factory reset from recovery
(note that deodexed version needs about 10 minutes for first boot after performing wipe data)
Click to expand...
Click to collapse
my fault
its wanam xposed issue not your rom :good:
Hello!
My phone says in About menu 900FD, but on the download screen: 900MD. Is it normal? I have bought it as 900FD.
Now I'm on a deodexed stock ROM (installed with FlashFire to save KNOX0x0). Do I need clean install the DevBase ROM, or simply dirty flash is enough?
G.
Georgie9117 said:
Hello!
[1] My phone says in About menu G900FD, but on the download mode: G900MD. Is it normal? I have bought it as G900FD.
[2] Now I'm on a deodexed stock ROM (installed with FlashFire to save KNOX0x0). Do I need clean install the DevBase ROM, or simply dirty flash is enough?
Click to expand...
Click to collapse
[1] Don't worry, same here. I was also confused due to this info in DM, but did some test that confirmed it is definitely G900FD. See attachments G900MD doesn't support e.g. LTE800 (band 20) while G900FD support it. No comments are required
[2] Dirty flash SHOULD be enought.. I could guarantee that wipe data will not be necessary only in case of flashing over pure stock installed via PC Odin or FlashFire
xXx No Limits ☆ S5 ROM for G900F/W8
☆Fast☆Snappy☆Smooth☆Stable ☆
[FONT="][FONT="][FONT="]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/FONT]
[/FONT][/FONT]
About the ROM
GALAXY S5 Model ☆ SM-G900F/W8
Android 6.0.1 ☆ G900FXXS1CQAV
Changelist: 9493471
Security Updates: Januar 1, 2017
Rooted: SuperSU v2.77 Stable
Major flash options
SuperSU + suhide
Odexed
Deodexed
xXx Tweaks
Keyboards
Kernel selections
Xposed
Xposed Material Design Installer
Viper4Android|Beats|Atmos
Good Lock
Modded Camera
The base of this rom is very close to the original Samsung Touchwiz build and I’m flashing the original stock system image as I believe that this provides the most stable rom base for the S5. This method ensures totally correct permissions and symlinks which makes the rom most stable and compatible. You can choose if you want to install the rom either odexed or deodexed.
xXx System Tweaks
Based on that I added several useful CSC, build.prop and init.d tweaks for more and consistent system and network speed and improved Ram management. These tweaks also improve multitasking and keeps the system constantly fast.
A modified hosts file take care of the annoying ads and I added a fix which solves some issues which was introduced with the new security handling of Marshmallow.
Debloating
The rom is light debloated already and removes only apps which could be downloaded anytime later from Google Playstore
You could use my BareBone Cleaner to selectively remove much more apps and services which you don’t need to further improve available Ram and Speed and come down to a Barebone level and a very light Rom. The advantage to do this with the stock based TouchWiz rom is that the Camera, Bluetooth, NFC, Fingerprint etc. keep 100% working as expected.
SystemUI variations
Also I’m offering some extra flashable SystemUI options to add Good Lock or 3minit battery, the S7 white taskbar theme, and some more little tweaks.
Xposed
To round up everything you can install the Xposed framework which is totally ready to go. You just need to add the modules you want to use.
Sound enhancements
This is a combo of Viper4Android, Sony Beats, eXtremeBeats Aural Maximizer and Dolby ATMOS for a class’s better sound experience than you know it from the stock rom thanks to xda members guitardedhero, Ben Feutrill and worstenbrood.
[FONT="]Kernels[FONT="]
Currently you can choose between 3 different kernels. [/FONT] [FONT="]The default kernel is obviously the stock kernel for highest compatibility and stability. [/FONT] [FONT="]If you are interested in true SELinux permissive kernels with plenty of additional features you are able to choose between the [/FONT]Phoenix Kernel[FONT="], [/FONT]CrazySuperKernel and Boeffla-Kernel. Just visit their threads to see which kernel fits best your requirements.
[FONT="]Keyboards[/FONT][FONT="]
Currently you can choose between 3 different keyboards. [/FONT] [FONT="]The S5 stock keyboard, the S6 keyboard, the Sony Xperia Keyboard and the C5 Keyboard.[/FONT] [FONT="]The S6 keyboard unfortunately do not support key vibration while this and much more options are available with the Sony and very similar C5 Keyboard.[/FONT]
[/FONT]
Instructions
Flash Options
In the root of the rom installer package you find the file “xXx.options.prop”.
To change any installation options you will need to edit this file with Notepad++.
You may also copy this file onto your internal or external sdcard. In this case the installer will read the options from the sdcard instead of the file inside the installer.
xXx.options.prop editing
The easiest way is probably to download the xXx.options.prop using the download link in the op or second post to your PC and install Notepad++.
Never edit this file with any other editor on your PC. But you could also edit the prop file on with your phone. In this case you can use any given editor.
Then you change all desired values. You will always get explanation line and after that the option to be changed.
Then save your changes and place the modified xXx.options.prop to the root of your internal sdcard.
This way also future rom updates will use this settings instead the default settings in the rom zip.
xXx.options.prop options
root.supersu=
0 = no root
1 = enable root access (default)
2 = Experiental might bootloop - SuperSU + suhide 0.55 by @chainfire to get Safety Net & Pokemon Go working
deodexed.rom=
0 = odex (default)
1 = deodex
Difference between Odexed and De-Odexed Roms
kernel=
0 = Stock Kernel (default)
1 = Phoenix Kernel Reborn v1 powered by @tamirda
2 = CrazySuperKernel v4 powered by @CrazyGamerGR
3 = Boeffla-Kernel new Anykernel v2.4 Final powered by @Lord Boeffla
keyboard.mod=
0 = Stock S5 keyboard (default)
1 = S6 Keyboard (key vibration not working!)
2 = Stock S5 + Sony Xperia Keyboard
(Sony keyboard needs to be enabled in android settings)
3 = C5 Keyboard (like S6 Keyboard but newer and key vibration works!)
systemui.mod=
0 = pure stock SystemUI (default)
1 - White theme, 3minit battery, rounded notifications and recents, Sdcard notifications fix
2 = Good Lock v24.0.16
Here you find an introduction and demo as a Youtube video.
Good Lock is a SystemUI enhancement developed by Samsung which provides many new options for the notification area, recent apps screen and lock screen. I added that as a third “battery.mod” option in the xXx.options.prop. Default is 0 which will install the stock SystemUI. If you set it to 2. Just flash the separate SystemUI options to get Good Lock or one of the other SystemUI options. If you flashed Good Lock you will get a new app in the drawer which provides you with configurations and tons of options.
Please Note: Good Lock is replacing the complete SystemUI. This means when you want to have one of the other SystemUI options with the mods like 3minit or rounded notifications etc. it will totally replace Good Lock again.
3 - White theme, rounded notifications and recents, Sdcard notifications fix
Like option 1 but without 3minit battery
xXx.tweaks=
0 = no Tweaks
1 = Tweaks enabled (default)
A collection of system tweaks which optimizes overall speeds and RAM management
5-Way Reboot menu
Privat Mode fixed
Changed default Window Animation Scales to 0.5 for faster animations
Updated hosts file for Adblock
Screen Overlay Fix
SystemUpdateService Disabler
2 = xXx Tweaks + Qualcomm Adreno 330 Beta Drivers with Stability Fix by @DAS82 based the on @airidosas252 framework
Detailed information about this you will find here
Camera Mod=
0 = stock camera (default)
1 = camera mod thanks to @amk1
Detailed information about all mod features you will find here
Screen.overlay.fix=
0 = stock camera (default)
1 = camera mod thanks to @amk1
Detailed information about all mod features you will find here
xposed=
0 = no xposed
1 = Xposed + original Rovo Xposed Installer (default)
2 = Xposed + Material Design Xposed Installer thanks to @dvdandroid
sdcard.fix=
sdcard Fix Permissions script
fix ownership and permissions of files and directories on the sdcard to what they would be
if Android OS had put them there itself, since some apps can't access pushed files that have root.root as owner/group
Sometimes Apps FC when trying to access/write files on sdcard even with correct r/w permissions.
This might fix this issues.
Please Note: Depending on how much files you have stored on your sdcard it can take
up to several minutes to scan and fix it!!
Don't become nervous when Rom flashing process will stuck here for a while,
it will continue - Promised !!
Allowed values:
0 - disabled
1 - enabled (default)
sound.mod=
0 = Stock sound system
1 = OLD - V4A Combo - Viper4Android + Sony Beats + eXtremeBeats Aural Maximizer by @guitardedhero and Ben Feutrill
2 = OLD - Like Option 1 + Dolby ATMOS thanks to worstenbrood
3 = NEW - Viper4Arise/eXtremeBeats Combo by @A.R.I.S.E. Sound Systems and @Ben Feutrill (default)
security.files=
Take care of security-related system files if there are any like SuperSU PIN, Avast Anti-Thelf in root mode etc.
0 - skip backup
1= (default) - makes a backup and then restore at the end of installation
stock.recovery=
Flashing Marshmallow and installing SuperSU will trip Knox to 0x1 anyway. So just keep the default setting here to stay with your custom recovery.
0 – (Default) - check KNOX status and overwrite if 0x0
1= force overwrite current recovery with stock recovery
CSC=
This will provide you with two major options
KCSC – (default)
Keep current CSC, recommended in most cases.
This will save your current CSC before the system partition will be overwritten and after the new system is in place your current CSC will be restored.
Choose one of the following CSC’s and force this CSC to be installed during rom flash.
It should look like this sample CSC=BTU
Make sure everything is UPPERCASE
ALB, ALE, ARO, ATL, ATO, AUT, BGL, BMC, BTU, BVO, CHO, CMF, COO, CYO, DBT, DTM, EON, ETL, EUR, H3G, ILO, ITV, KSA, LUX, MEO, MET, MOB, MOT, MSR, MWD, NEE, NZC, OMD, OMN, ORX, PCI, PCW, PEO, PHE, PHN, PRO, ROM, SEB, SEE, SER, SIO, SWC, TDR, TEB, TEM, TEN, TMB, TMZ, TNZ, TOP, TPA, TPH, TSI, TSR, TTT, TUR, TWO, UPO, VD2, VDH, VDS, VIA, VIM, VNO, XEF, XEH, XEO, XME, XSG, XTC, ZTO
Click to expand...
Click to collapse
Space
CSC Options
This is a multi CSC rom which currently provides with the following sales codes
ALB, ALE, ARO, ATL, ATO, AUT, BGL, BMC, BTU, BVO, CHO, CMF, COO, CYO, DBT, DTM, EON, ETL, EUR, H3G, ILO, ITV, KSA, LUX, MEO, MET, MOB, MOT, MSR, MWD, NEE, NZC, OMD, OMN, ORX, PCI, PCW, PEO, PHE, PHN, PRO, ROM, SEB, SEE, SER, SIO, SWC, TDR, TEB, TEM, TEN, TMB, TMZ, TNZ, TOP, TPA, TPH, TSI, TSR, TTT, TUR, TWO, UPO, VD2, VDH, VDS, VIA, VIM, VNO, XEF, XEH, XEO, XME, XSG, XTC, ZTO
By default the “CSC” option in “xXx.options.prop” is set to CSC=KCSC.
This means "Keep current CSC". As long as you don’t wipe your system partition before you flash this rom this will keep the CSC of your current rom in place.
If you are typically using one of the above listed CSC’s just replace KCSC with the desired code of your mobile provider.
Click to expand...
Click to collapse
Space
Modem and Bootloader
It’s recommended to flash the corresponding Modem and Bootloader before you flash this rom.
As in most cases Modem and Bootloader will be flashed at the same time I combined them in one tar.md5 which have to be flashed with Odin. Just open the file AP…….tar.md5 in the “AP” section in Odin and flash it.
Bootloader & Modems for G900F
https://www.androidfilehost.com/?w=files&flid=39275
Click to expand...
Click to collapse
Space
Debloating
This rom is only very light debloated. If you want to debloat further you could use my BareBone Cleaner.
The BareBone Cleaner is an Aroma Installer based tool which will debloat your TouchWiz Lollipop rom up to a core minimum in order to increase available ram and get rid of performance wasting apps and services which are not mandatory.
You get rid of all the Samsung crap, bloatware, the annoying “check cover” warning or other apps which you could easily add again to your personal liking from the Google Playstore.
http://forum.xda-developers.com/galaxy-s5/development/mod-urwsoft-barebone-cleaner-t3043479
Click to expand...
Click to collapse
How to Flash everything
Create a Nandroid Backup in custom recovery of everything first
Shutdown the phone and pull the battery for about 10 sec.
Disconnect your phone from your PC
Then restart the phone straight to the download mode.
Now open Odin as Administrator on your PC and load the bootloader md5.
Now connect the phone to the PC and make sure Odin reports the phone connected.
Now hit ?Start? in Odin to flash it.
To be on the save side, shut down the phone and pull the battery again for about 10 sec.
Boot the phone into custom recovery (TWRP 3.0.0.0)
Hit ?Wipe? and then ?Advanced Wipe?
Go to Install Section, select Rom zip, flash the rom and reboot.
Wipe Dalvik / Art Cache, System, Data and Cache.
Optional you could now debloat your rom with the BareBone Cleaner. Could be done later as well.
Takes about 8-10 min until setup screen will show up.
Enjoy the rom.
Click to expand...
Click to collapse
xXx.options.prop editing
The easiest way is probably to download the xXx.options.prop using the download link in the op or second post to your PC and install Notepad++.
Never edit this file with any other editor on your PC. But you could also edit the prop file on with your phone. In this case you can use any given editor.
Then you change all desired values. You will always get explanation line and after that the option to be changed.
Then save your changes and place the modified xXx.options.prop to the root of your internal sdcard.
This way also future rom updates will use this settings instead the default settings in the rom zip.
Click to expand...
Click to collapse
Download folders
The following download links are fixed folder links which will provide you with a list of all available versions. Just choose your preferred version.
xXx No Limits Roms for G900F/W8
https://www.androidfilehost.com/?w=files&flid=48391
Bootloader & Modems for G900F/W8
https://www.androidfilehost.com/?w=files&flid=39274
Download "xXx.options.prop" only
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
URWsoft Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?w=files&flid=27003
Please Note: FlashFire 0.30+ users need to deselect the reboot option on the very last Cleaner Screen. Otherwise you would need to pull the battery.
Credits
:good::good::good:
@_alexndr - @airidosas252 - @amarullz - @amk19 - @arter97- @bejunk - @Ben Feutrill - @Chainfire - [FONT="]@[FONT="]CrazyGamerGR[/FONT] - [/FONT][FONT="]@DAS82 - [/FONT][FONT="]@dvdandroid - @edgarf28 - @gharrington - @guitardedhero - @klenamenis [/FONT]- [FONT="]@[FONT="]Lord Boeffla - [/FONT][/FONT][FONT="]@loserskater - @mcdachpappe [/FONT]- @mike1986. - [FONT="]@or1m - @osm0sis - [/FONT]@rufus.wilson - @tamirda - [FONT="]@topjohnwu - @wanam[/FONT]
XDA:DevDB Information
S5 Rom, ROM for the Samsung Galaxy S 5
Contributors
xXx
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Current Stable Version: 6.1
Stable Release Date: 2017-2-02
Created 2016-01-31
Last Updated 2017-2-02
Instructions and Features of the latest available Rom version
Version 6.1 based on CQAV is available for Download Many of you who are using TWRP 3.0.0-0 or PhilZ Recovery experienced issues after flashing v6.0 with write access of apps to the internal sdcard. This was caused by the sdcard fix script from osm0sis which obviously only works with TWRP 3.0.2 or higher.
Version 6.1 solves this issue and is compatible again with TWRP 3.0.0-0 or PhilZ Recovery.
If you are already successfully using v6.0 you can stay with it as this is the only difference between v6.0 and v6.1. If you need to flash the rom again to use other options etc. you should use v6.1.
Downloads
G900F specific downloadsxXx_NoLimits_6.1_ G900FXXS1 CQAV.zip
https://www.androidfilehost.com/?fid=745425885120704156
G900F - Lastest CQAV bootloader & CQAW modem combination
https://www.androidfilehost.com/?fid=529152257862691417
G900W8 specific downloadsxXx_NoLimits_6.1_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=529152257862700164
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 6.0 based on CQAV is available for DownloadMany of you was looking for an update of the sound mods. Thanks to all beta testers I was able to implement a new combo of the latest ARISE + eXtremeBeats.
Big thanks again to all beta testers who helped me to keep the rom alive as I don’t have my S5 anymore.
What’s new in 6.0 vs. 5.9:
New G900F Rom base CQAV
Change list 9493471
New Android Security Patch Level – Jan. 1, 2017
New Bootloader & Modem Combi
CQAV Bootloader
CQAW Modem
Updated several build.prop settings to improve smoothness, multitasking and lag free operation thanks to @airidosas252
More details here
Sound mods
NEW Viper4Arise/eXtremeBeats xXx Combo thanks to @A.R.I.S.E. Sound Systems and @Ben Feutrill
Set sound.mod=3 in xXx.options.prop to get it. (new default)
To get my favorite headset sound profile for perfect bass and clarity open Viper4Arise app, go to the menu and “Load Effect Profile” called “Deep Bass+Clarity” thanks to @mantakos
After applying the profile, don’t forget to switch on the Master Power” switch in Viper4Arise
Please Note: This new sound mod combo is not compatible with the previous one. It will completely replace any old sound mod and I didn’t add Dolby ATMOS as an option for this as this new combo itself is more than awesome especially in combination with the Effect Profile from mantakos.
Known Issue: After each phone restart you will see the green apps updating screen for about 1 sec. Don’t worry, but we couldn’t get rid of this so far.
OLD V4A Combo is still available with the following settings:
Set sound.mod=1 in xXx.options.prop to get Viper4Android + eXtremeBeats
Set sound.mod=2 in xXx.options.prop to get Viper4Android + eXtremeBeats + Dolby ATMOS
SDcard Fix Permissions script thanks to @osm0sis
Added this script as a new option.
It’s NOT solving the known r/w access permission issues in Marshmallow but fix ownership and permissions of files and directories on the sdcard to what they would be if Android OS had put them there itself, since some apps can't access pushed files that have root.root as owner/group.
Sometimes Apps FC when trying to access/write files on sdcard even they seem to have correct r/w permissions. This might fix this issues.
Set sdcard.fix=1 in xXx.options.prop to get it. (new default)
Please Note: Depending on how much files you have stored on your sdcard it can take up to several minutes to scan and fix it!! Therefore don't become nervous when Rom flashing process will stuck here for a while. It will continue. Promised J
Also this sdcard.fix option is triggered whenever you choose the new sound mod to be installed.
Updated xXx.options.prop to v14
New defaults
sdcard.fix=1
xposed=2
sound.mod=3
SuperSU 2.7.7 Stable for best compatibility
Updated Boeffla Config App to 2.4.28
Requires a system restart after a clean install and the very first initial Boeffla Settings App execution
Special Notes:
Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
Please make sure to provide root permission to the SystemUpdateService Disabler when asked
sdcard.fix option is triggered no matter what if you choose the new sound.mod=3 to be installed
Known issue: There seem to be an issue that the stock music player fc after it was updated to the latest version via Play store. We will look into that and hopefully find a fix.
Suhide is still on v0.55 and most probably don’t work since Nov. security updates anymore.
root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop.
So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_6.0_ G900FXXS1 CQAV.zip
https://www.androidfilehost.com/?fid=745425885120704155
G900F - Lastest CQAV bootloader & CQAW modem combination
https://www.androidfilehost.com/?fid=817550096634741921
G900W8 specific downloadsxXx_NoLimits_6.0_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767133248
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=817550096634742364
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.9 based on CPLV is available for Download
Even I always said that I would like to stay on the G900FXXU1 type firmware I decided now to switch to G900FXXS1. The reason is that for 2 or 3 month now the monthly Android Security updates was always provided as “S1” about 2 weeks before “U1”. Also as @TheHiman reported earlier, it looks like the S1 type firmware supports VoLTE which the “U1” firmware don’t. http://forum.xda-developers.com/gala...7#post70012597
The main reason why I wanted to keep staying with the U1 type was that switching back and forth may not allow dirty flashes without experiencing errors from Google Partner Setup etc. I had some beta testers who tested several configurations and confirmed that even dirty flashing works fine. So shouldn’t be an issue.
There was several users complaining about slow boot up times and it was reported that SuperSU 2.7.7 stable didn’t have this issue. For beta testing I used latest v2.7.9 SR1 and this failed in combination with PhoeniX Reborn kernel. Therefore I decided to go for SuperSU 2.7.7 stable. If you still want to go for the latest SuperSU just flash it after the rom in sequence or any time later.
I saw several requests to update the sound mods like V4A and eXtremeBeats to the latest version. I didn’t find the time yet to do so.
Big thanks again to all beta testers who helped me to keep the rom alive as I don’t have my S5 anymore.
What’s new in 5.9 vs. 5.8:
New G900F Rom base CPLV
Change list 9493471
New Android Security Patch Level – Dec. 1, 2016
New Bootloader & Modem Combi
CPLV Bootloader
CPJ1 Modem
Updated SuperSU 2.7.7 Stable
Updated PhoeniX Kernel to new PhoeniX Reborn Kernel V1.0 MM
Set kernel=1 in xXx.options.prop to get it
Updated Good Lock to v24.0.16
Set battery.mod=2 in xXx.options.prop to get it
Please Note: Fingerprint don’t work with Good Lock. Workaround here
Changelog
Updated Boeffla Config App to v2.4.22
Requires a system restart after a clean install and the very first initial Boeffla Settings App execution
Special Notes:
Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
Please make sure to provide root permission to the SystemUpdateService Disabler when asked
Known issue: There seem to be an issue that the stock music player fc after it was updated to the latest version via Play store. We will look into that and hopefully find a fix soon.
Suhide is still on v0.55 and most probably don’t work with latest Nov. security updates anymore. root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop. So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_5.9_G900FXXS1CPLV.zip
https://www.androidfilehost.com/?fid=673368273298919727
G900F - Lastest CPLV bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=529152257862691417
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devd...3659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.8 based on CPK3 is available for Download
Yes, I said I will stop the development for the S5. That’s still true. What I did is just created a new 5.8 version based on CPK3 and updated several components like supersu, kernel, xposed etc. As long as this method is working without the need to update any of the mods it’s an faily easy task for me.
Nevertheless, an experienced user tested it for me and everything seems to work fine. Therefore, herewith I make the G900F version available to all of you.
What’s new in 5.8 vs. 5.7:
New G900F Rom base CPK3
Change list 9493471
New Android Security Patch Level – Nov. 1, 2016
New Bootloader & Modem Combi
CPK3 Bootloader
CPJ1 Modem
Updated SuperSU 2.7.8 SR5
Updated Xposed framework by wanam to v87.1
· Updated Material Design Xposed Installer to latest Nov. 2016 Version
Set xposed=2 in xXx.options.prop to get it
Set xposed=1 for original Rovo Xposed Installer v3.1 (default)
Updated Boeffla-Kernel and App to v2.4 Final
Set kernel=3 in xXx.options.prop to get it
Requires a system restart after the very first initial Boeffla Settings App execution
Special Notes:
· Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
· Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
· Version 5.8 can be dirty flashed over at least all 4.x versions. All earlier Versions especially Lollipop version like v1.6 or older should definitely be clean installed.
o Although it helps to make a clean install from time to time to get rid of some weird issues. Read user experience here
· Please make sure to provide root permission to the SystemUpdateService Disabler when asked
· Suhide is still on v0.55 and most probably don’t work with latest Nov. security updates anymore. root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop. So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_5.8a_G900FXXU1CPK3.zip
https://www.androidfilehost.com/?fid=385035244224402767
G900F - Lastest CPK3 bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=385035244224402568
G900W8 specific downloadsxXx_NoLimits_5.7_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767103996
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.7 based on CPJ6 is available for Download
What’s new in 5.7 vs. 5.6:
New G900F Rom base CPJ6
Change list 9493471
New Android Security Patch Level – October 1, 2016
New Bootloader & Modem Combi
CPJ6 Bootloader
CPJ1 Modem
Hopefully finally fixed DCMprovider error message
G900W8 stock firmware was not updated yet but got the xXx 5.7 rom update which this time is the DCMprovider error message fix only. If you don’t experience that, no need to update.
Special Notes:
· Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
· Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
· Version 5.7 can be dirty flashed over at least all 4.x versions. All earlier Versions especially Lollipop version like v1.6 or older should definitely be clean installed.
o Although it helps to make a clean install from time to time to get rid of some weird issues. Read user experience here
o Important Note for G900W8 users: v5.7 is based on latest G900W8VLS1DPF3. If you are coming from v5.0 (or lower) G900W8VLU1DPD3 you most probably will experience errors from Google Partner Setup etc. You could try to wipe data of the respective app to fix this but best you can do is a clean install.
· Please make sure to provide root permission to the SystemUpdateService Disabler when asked
· Suhide is still on v0.55. Chainfire recently posted that he will update it but it might take some more time as he is planning to release a new SuperSU version first.
· If anybody is missing his desired CSC please provide me with information which specific stock rom includes that.
Downloads
G900F specific downloadsxXx_NoLimits_5.7_G900FXXU1CPJ6.zip
https://www.androidfilehost.com/?fid=457095661767103997
G900F - Lastest CPJ6 bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=457095661767103992
G900W8 specific downloadsxXx_NoLimits_5.7_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767103996
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
reserved for further resources
Downloading,thanx.
My baseband now is BOJ3,must i change in BOL3 or just flash your rom.Iam on 5.1.1 lolipop
Isn't their an option for tweaks and odex? Are there any tweaks like build prop added for odex? Cheers
Congratulations @xXx ! This is an amazing ROM! It is super fast and smooth and yet friendly on the battery under normal usage/sleep. Everything I tried works without a hitch so far. Thank you very much for sharing!
Two questions bro, it works on 900M? And your rom has system control? Like hct or phoenix?
Again i say that your work is very good and i rated it 5 stars ...i flashed the rom deodexed + tweaks, smooth as butter here. Because i posted in your cleaner thread i also repeat this:
!WARNING!: Deleting 3minit app from system makes the system ui crashing;
FIX: Dirty re-flash the rom and all goes well. For who wants the stock battery, simple open 3minit and navigate to "user", then choose the 15th one (even if it's not the 15th you should see the stock icon in users section) for having the stock battery icon back
Probably a stupid question, but do you think this will work on a G900i variant? This rom sounds really good and there are not many options for rom based on G900i.
I just get 50k on antutu
Thanks for this rom , i will test today and i will report !
mladenovic73 said:
Downloading,thanx.
My baseband now is BOJ3,must i change in BOL3 or just flash your rom.Iam on 5.1.1 lolipop
Click to expand...
Click to collapse
this depends on the rom you are using right now. If this is very close to stock without any tweaks and mods you should be fine if you just flash over. Otherwise I would recommend to wipe system first to make a clean install.
Thanx man.
What about xposed?
Sent from my SM-G928F using Tapatalk
luigy-cer7 said:
Two questions bro, it works on 900M? And your rom has system control? Like hct or phoenix?
Click to expand...
Click to collapse
john-au said:
Probably a stupid question, but do you think this will work on a G900i variant? This rom sounds really good and there are not many options for rom based on G900i.
Click to expand...
Click to collapse
this rom is basically for G900F and includes the respective stock kernel. You might be lucky to get it working if your G900 variant is snapdragon based and if you flash a custom kernel right after you flashed the rom. Rom content for G900M, G900T or G900W8 is similar to G900F. So should work fine with custom kernel while G900i, G900L are a bit different and might show some NFC, Wifi issues etc. Exynos based models like G900H are not working at all with this rom.
tobs3596 said:
I just get 50k on antutu
Click to expand...
Click to collapse
Debloated? Are you using stock kernel?
lovewisher said:
What about xposed?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
xXx said:
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
Click to expand...
Click to collapse
thnx for reply dear can u tell me name which file should i download lots of file showing i have no idea
marko11071989 said:
Debloated? Are you using stock kernel?
Click to expand...
Click to collapse
which kernel is recommended?
lovewisher said:
What about xposed?
Click to expand...
Click to collapse
xXx said:
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
Click to expand...
Click to collapse
lovewisher said:
thnx for reply dear can u tell me name which file should i download lots of file showing i have no idea
Click to expand...
Click to collapse
This Xposed Framework installation description is for deodexed rom only!
Create a backup first
Install XposedInstaller app from from rovo89 XposedInstaller_3.0_alpha4.apk
Important! Install the apk first before you flash the following xposed framework zip, otherwise you will end up in a bootloop.
Download the xposed framework zip xposed-v75-sdk21-arm-arter97-snapdragon.zip and place it on your internal/external SDcard
Flash the xposed framework zip
Reboot your system and you are ready to add your desired xposed modules
Galaxy Note 5 PC3 Marshmallow Stock Deodexed Rom
This build is based on the stock PC3 6.0.1 Marshmallow build.
This is a first release. Even though it has been tested, please report any issues.
You MUST be running a Marshmallow bootloader to run this rom!
The FULL odin firmware must be flashed at least once to prep the phone. It is available here -- > Marshmallow 6.0 Odin files N920PVPU2BPC3
Features:
- Rooted
- Busybox
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- 5 way reboot
- Signature verification removed
- Netflix & screen mirroring fixes
- All apps updated to current versions
Download Link ---> N920P_PC3.6.0.1.De-Odexed.Ver1.1.zip
MD5 Checksum: 324eb4f81999acb0d39ad68f3ed4abb2
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
twrp-3.0.2-0-M-nobleltespr.tar.tar
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode
(press and hold Power + Volume Down buttons and as soon as the phone reboots hold Home + Power + Volume Up buttons )
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Code:
[B]Changelog:[/B]
[B]Version 1.1[/B]
- permission fixes tnx to [user=3699616]@mwilky[/user]
- SuperSU Beta updated to v2.71
- OTG storage fixed
- Gear VR fixed
- Fixed something else, I just don't remember what it was ;)
[B]Version 1.0[/B]
- initial release
Android M Debloat tool
Attached at the bottom of this post.
HIGHLY recommended to remove all the unnecessary bloat.
Flash right after rom install (before rebooting) for best results.
Credits:
@mwilky for permission fixes to get things running the way its supposed to
@SuperR. for the rom kitchen and his ongoing support
Note 5 Recoveries
Note 5 Kernels
Sprint Galaxy Note 5 Modems
** Modems are flashed in Odin. The tar file gets placed in the CP slot.
================================================
Mini-Bootloaders
These will allow you to flash between 5.1.1 and 6.0x with ease.
Important note:
- You MUST flash the full marshmallow tarball at least once to prepare the phone.
- You MUST match the Bootloader version to your backup, they are not interchangeable. The OK3 firmware will run older versions of 5.1.1 too.
Mini Bootloaders Link
OK3 = 5.1.1
PA2 & PC3 = 6.0.1
Use of Mini Bootloaders:
- These do not include the OS and REQUIRE that you have a matching OS backup already saved to restore
- Flash the bootloader with Odin (same instructions apply as rom flash in Post #1). Make sure you uncheck the auto reboot choice first.
Once the flash is complete unplug the phone, press and hold pwr + volume/down to reboot and as soon as the phone resets, immediately press pwr + home + volume/up to enter custom recovery and restore your backup.
** If you missed the key sequence try again, it takes good timing but I'm sure you'll be a pro at it in no time.
Just for Fun
ZTE 'DiscoBall' Lockscreen
- two finger hold on disco ball brings up extended shortcut menu
- works ONLY on swype type lockscreen
- does not have onscreen notifications, its just a cool little app
- little bug, pressing home button takes you right to the desktop so be aware if you carry this in your pocket, it may unlock on its own
SElinux permissive or enforced?
primaleph said:
SElinux permissive or enforced?
Click to expand...
Click to collapse
Stock kernel.
So we have to be on mm to flash this? This might be a dumb question, is there anyway of being on 5.1.1 to flash this?
Tdunham always got our hack thanks bro
Sent from my SM-N920P using XDA Premium HD app
Debloat tool updated v1.1 to deal with some of those nasty Sprint apps that get installed to the data partition if you forget to flash it before the first boot.
Known issue - some of the Sprint bloat will popup with some errors that they cannot install. Not really interested in getting all the downloaded bloat working at the moment, just thought I would point it out to prevent some questions.
tdunham said:
Debloat tool updated v1.1 to deal with some of those nasty Sprint apps that get installed to the data partition if you forget to flash it before the first boot.
Known issue - some of the Sprint bloat will popup with some errors that they cannot install. Not really interested in getting all the downloaded bloat working at the moment, just thought I would point it out to prevent some questions.
Click to expand...
Click to collapse
To fix this, remove Sprint ID. Freezing it or hiding it with Debloater may not be enough.
Is there a kernel for this rom?
tdunham said:
Galaxy Note 5 PC3 Marshmallow Stock Deodexed Rom
This build is based on the stock PC3 6.0.1 Marshmallow build.
This is a first release. Even though it has been tested, please report any issues.
You MUST be running a Marshmallow bootloader to run this rom!
Features:
- Rooted
- Busybox
- Hotspot enabled
- Knox Removed
- ItsOn Removed
- 5 way reboot
- Signature verification removed
- Netflix & screen mirroring fixes
- All apps updated to current versions
Download Link ---> N920P_PC3.6.0.1.De-Odexed.Ver1.0.zip
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
twrp-3.0.0-3-M-nobleltespr.tar.tar
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode (press and hold Home + Power + Volume Up buttons)
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Android M Debloat tool
Attached at the bottom of this post.
HIGHLY recommended to remove all the unnecessary bloat.
Flash right after rom install (before rebooting) for best results.
Click to expand...
Click to collapse
Freaking cool dude..
It says my USB storage is corrupt. But I put in my S6 and it works fine. I even formatted it and it still says corrupt. If you could upload a patch to fix that'd be sweet. That's the only issue I've come across. Thanks for the ROM.
---------- Post added at 06:54 AM ---------- Previous post was at 06:46 AM ----------
I even went into TWRP and it let me mount USB storage and select from it. So gotta be something in ROM that keeps saying it's corrupt. Thanks again.
The hotspot hack you have on this rom, do you use The HiddenMenu.apk from the OK3 Rom?
Androidwarrior said:
The hotspot hack you have on this rom, do you use The HiddenMenu.apk from the OK3 Rom?
Click to expand...
Click to collapse
No, patched in services.
Bobthahog said:
It says my USB storage is corrupt. But I put in my S6 and it works fine. I even formatted it and it still says corrupt. If you could upload a patch to fix that'd be sweet. That's the only issue I've come across. Thanks for the ROM.
---------- Post added at 06:54 AM ---------- Previous post was at 06:46 AM ----------
I even went into TWRP and it let me mount USB storage and select from it. So gotta be something in ROM that keeps saying it's corrupt. Thanks again.
Click to expand...
Click to collapse
I'm hearing about this on other versions of MM as well. Someone suggested that they formatted the SD on the phone and its working fine again.
As far as I know, its not doing it on stock but this version is so new that I cant verify if it has something to do with marshmallow being deodexed or what the issue is with that. We'll have to keep an eye on it. I have a few smaller SD cards, maybe I'll start swapping them around to see if I can duplicate it. We need more information and input from other people. :good:
tdunham said:
No, patched in services.
Click to expand...
Click to collapse
If the prl or profile gets updated will it break the hotspot hack?
Androidwarrior said:
If the prl or profile gets updated will it break the hotspot hack?
Click to expand...
Click to collapse
Dude, you've run a bunch of my stuff, has that EVER broken hotspot?
For everyone else, the real answer is no.
Quick question. Does the MM debloat tool effect GearVR?
For those with internal storage issues, open up a terminal & try
su
restorecon -FR /data/media/0
Not sure if will work but it would on my Nexus 5 when I encountered that issue.
Can this be used as a daily
I just stumbled onto this thread. Is the ROM buggy? I can't tell from the comments
Flashed this morning and running great. Good work Dunham. Question, what was the ad block app you used on MOAR rom?
Hi.! welcome to Suemax kernel thread for marshmallow update
Supported Device N910C/H/U
Change log :
Pure Basic v3.2 TEST Release
1.) Added Fake Enforce option (Magisk only)
2.) SaftyNet workaround and Bypass (Magisk only)
3.) Hide- red seandroid enforcing at boot (ONLY for SuperSU systemless)
Pure Basic v3.1 Last Release
1. Updated Linux Patch to 3.10.105
2. Updated Ramdisks to latest verions
Pure Basic v3.0 Previous
1. SM-N910C_SEA_MM_Opensource_N910CXXS2DPK7
2. Linux version Patched to 3.10.104
3. Updated ramdisks to N910CXXS2DPL8 & N910UXXS2DPL1
4. I/O Schedulers: sio,sioplus,tripndroid,Vr & zen
5. Added UX (Note7) + Stock firmware Support
6. Added CPU
+ALUCARD:
+BIOSHOCK
+INTEREXTREM
+LIONHEART
+CONSERVATIVEX
+IMPULSE
-(Ondemand + Conservative Disabled)
NOTE : Rest of changes Same as v2.0
v.2.0 (new)
1. Fixed private mode (Un-tested)
2. ADB insecure (now work with Android 6)
3. Updated ramdisk script
v1.0b
Has same change log but only compiled at my work station with initial Changes :angel:
v1.0
CPU
a. ) Enabled Ondemand & Conservative governor
b. ) Added Bio-shock governor
c. ) Added Lionheart governor
d. ) Added INTEREXTRE governor
Other Cpu tweaks
a. ) Added Freq relationship C ( For more power saving )
b. ) Tweaked Interactive Cpu governor & More
File-System support
a. ) NTFS
b. ) F2FS
c. ) CIFS
Other Miscellaneous Supported drivers
a. ) MS XPAD game controller support
b. ) ISO & UDF CDROM support
Miscellaneous Support for System
a. ) CLEANCACHE & ZCACHE
Network TCP Ipv4
a. ) enable all TCP Congestion Algorithm in-built - Westwood+ default
SELUNIX : Permissive
Ramdisk-changes
a. ) Added auto-Busybox install (If not there in system xbin)
b. ) Added init.d script (Automatic enable if not in rom )
c. ) Added other tweaks for wifi password save on reboot , Screen Mirror fix and disabled security Tima and Knox
Note : Use kernel Adiutor to control kernel and setting Playstore
Read this F.A.Q
1. Kindly do not ask ETAs & Special requests if asked will be just ignored .
2. Reporting Bugs : Kindly detail your issue with Device(model) Firmware (Stock or custom rom Name) and with possible Logs e.g valid Logcat
3. Kindly Stay on kernel thread topic.!
Version Information
Status: Stable (No Snaypse support)
Current STABLE: v3.0
Android: 6.0.1 (N910CXXU2DPCB)
Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_BASIC_MM
New
Pure Basic Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_MM_Plus
Download :
v3.2
Download Pure Basic v3.2-N910C/H
N910U - SOON
v3.1
Download Pure Basic v3.1-N910C/H
Download Pure Basic v3.1-N910U
v3.0
Download Pure Basic v3.0-N910C/H
Download Pure Basic v3.0-N910U
Download Mirror (Android file host Mirror) Thanx @dicksteele
MIUI Support for N910C/H/U (Pure Basic )
v3.1
Download MiUi Pure Basic v3.1-N910C/H
Download MiUi Pure Basic v3.1-N910U
v3.0
Download MiUi Pure Basic v3.0-N910C/H
Download MiUi Pure Basic v3.0-N910U
v2.0
Download v2.0-N910C/H
Download v2.0-N910C/H (Android file host Mirror) Thanx @dicksteele
Download v2.0-N910U
v.1.0b
Download v1.0b-N910C/H
Updated to latest N910UXXU2DPC2 ramdisk
Download v1.0b-N910U
Link N910U Noise fix by not-i : http://forum.xda-developers.com/show....php?t=3228398
SCREENSHOT from v3.2
Reserved
Reserved
Great news. Thank you my friend!
thanks
Goodies coming
Sent from my SM-N910C using XDA Free mobile app
Nice I will test it when get MM update
Thank U!
beefx said:
Nice I will test it when get MM update
Thank U!
Click to expand...
Click to collapse
Thanx and do not forget to bug report if any and I will update thread with detail change log sooon.!!!!! :angel:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Delfinster said:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Click to expand...
Click to collapse
Yes .! Flash zip via any custom recovery :good:
djmax81 said:
Yes .! Flash zip via any custom recovery :good:
Click to expand...
Click to collapse
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Delfinster said:
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Click to expand...
Click to collapse
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
That was fast :good:
djmax81 said:
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
Click to expand...
Click to collapse
lol..i just see that superSu not working :d i will flash right now thanks for that info
agentdeep said:
That was fast :good:
Click to expand...
Click to collapse
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Delfinster said:
lol..i just see that superSu not working :d i will flash right now thanks for that info
Click to expand...
Click to collapse
Yes .! With new superSU v2.7.1 + Its recommended to Re-Flash SuperSU .zip after any kernel update coz Now on SuperSU do changes to kernel Ramdisk
djmax81 said:
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Click to expand...
Click to collapse
Will flash this and observe for few days :highfive:
Now is all okey and fine ....now testing kernel for couple of days..becose on mm battery is not that good
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Sapphire999 said:
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Click to expand...
Click to collapse
its know firmware related issue on Stock roms.
you need to add this line to platform.xml
<group gid="sdcard_rw" />
via root Explorer dir System>etc>permission>platform.xml (With text editor)
Reboot device after
But if you got issue with presses then upload platform.xml (i'll edit it for you and all you need to do set permission and reboot or ican make flashable zip)
cheers
Mod Edit: Content Removed
XDA:DevDB Information
Dead Toolkit {Infos} Xtrem/Assault, Tool/Utility for the Xiaomi Mi A2
Contributors
Matteo
Version Information
Status: Abandoned
Current Stable Version: DEAD
Stable Release Date: -0001-11-30
Created 2018-12-16
Last Updated 2019-02-04
Latest
-----------------------------------------------------
Version 5.4
Changelog:
- donation engine
- russian fix
- update & fix ota scripts
- fix's & improvements
-----------------------------------------------------
Version 5.3
Changelog:
- russian language & support
- fix github repos
- fix git engine
- update language engine
- update & fix ota scripts
- fix's & improvements
-----------------------------------------------------
Version 5.0
Changelog:
- move repos to github
- new git engine (now download repos, ota etc using git clone)
- update language engine
- english only
- better file locations & file optimizations
- new ota scripts
- fix's & improvements
- delete offline version, soon back again
- soon a version with an option to disable auto-update verification, so user can do it manually
-----------------------------------------------------
Old Changelog
-----------------------------------------------------
Version 4.2
Changelog:
- new language engine
- english, spanish, indonesian
- better file locations & file optimizations
- new ota scripts
- fix's & improvements
-----------------------------------------------------
Version Offline 4.2
Changelog:
- first release
- same changelog as version 4.2, but without ota scripts and without the update engine
-----------------------------------------------------
Version 2.0
Changelog:
- new engine
- some UI fix's and improvements
- auto update engine
- ota notification engine
- better scripts
- better edits & scripts for the twrp part
- same for teh rom part
-----------------------------------------------------
Version 1.3
Changelog:
-delete release engine
-create release & download engine
-ui fix's & improvements
-engine fix's & improvements
-update updater scripts
-fix extract scripts
-update credits
-create version rules
-easter egg
Woo nice man, i have usb debugging enabled on stock pie when i enter adb toolkit and select flash rom i get could not detect the active partition used, please ensure your phone is plugged in and in fastboot mode.
Press any key to retry..
when i whant to flash a ROM
boot into TWRP failed.
what can I do?
Thanks
Thanks
If I install twrp permanently, will I lose the OTA updates?
bavmouse said:
when i whant to flash a ROM
boot into TWRP failed.
what can I do?
Thanks
Click to expand...
Click to collapse
try to change the usb port
BassB said:
try to change the usb port
Click to expand...
Click to collapse
thanks! after changing the usb-port the toolkit works fine. everything was flashed, rom, twrp, hex, magisk. but after reboot in system i hang now in bootloop, after few minutes device powers off and wenn i start again it stocks on androd one logo for a few minutes, until device power off again. what went wrong? thank you.
EDIT
without hex it works fine-
awesome!
will try later
Hi,, does it work on the V10.0.2.0 ???
Can i temp root and go back to unroot??
Thks
royaltartufo said:
Hi,, does it work on the V10.0.2.0 ???
Thks
Click to expand...
Click to collapse
It works on V10.0.2.0 for me.
Can u add update ROM also
Matteo said:
Hey ! Today i will share you my new project, the "Mi A2 Xtrem Toolkit" !
Click to expand...
Click to collapse
I think you should update the HEX kernel that is included with this tool. The previous version causes bootloops. Use the latest one from telegram.
Edit - Sorry, I didn't see that you haven't included files of your own. The user needs to add them.
The provided TWRP isn't decrypting user data on V10.0.2.0 :/
Is it possible to used it for enabling camera2 API?
xdxita said:
The provided TWRP isn't decrypting user data on V10.0.2.0 :/
Click to expand...
Click to collapse
That's why we use sideload... Read everything next time.
Matteo
GK_NL said:
Is it possible to used it for enabling camera2 API?
Click to expand...
Click to collapse
Maybe in the next alpha build.
Matteo
The Toolkit linked in the thread is outdated. I will update it in some hours.
Changelog :
- new engine
- now stable
- auto update ( don't need to download a specific file or something like that. The Toolkit will does everything )
- some fix's and improvements
sakiyo said:
Can u add update ROM also
Click to expand...
Click to collapse
I will check that. Thank you for your support. When the new build will be pushed you will be able to contact me using the toolkit. It will allows user to have better support than on XDA.
Matteo
Matteo said:
That's why we use sideload... Read everything next time.
Matteo
Click to expand...
Click to collapse
Matteo, problem is that I need to access /data to remove a faulty magisk module that is causing bootloop. So far my only 2 options are wait for a fully working recovery or format /data.