Mod Edit: Content Removed
XDA:DevDB Information
Dead Toolkit {Infos} Xtrem/Assault, Tool/Utility for the Xiaomi Mi A2
Contributors
Matteo
Version Information
Status: Abandoned
Current Stable Version: DEAD
Stable Release Date: -0001-11-30
Created 2018-12-16
Last Updated 2019-02-04
Latest
-----------------------------------------------------
Version 5.4
Changelog:
- donation engine
- russian fix
- update & fix ota scripts
- fix's & improvements
-----------------------------------------------------
Version 5.3
Changelog:
- russian language & support
- fix github repos
- fix git engine
- update language engine
- update & fix ota scripts
- fix's & improvements
-----------------------------------------------------
Version 5.0
Changelog:
- move repos to github
- new git engine (now download repos, ota etc using git clone)
- update language engine
- english only
- better file locations & file optimizations
- new ota scripts
- fix's & improvements
- delete offline version, soon back again
- soon a version with an option to disable auto-update verification, so user can do it manually
-----------------------------------------------------
Old Changelog
-----------------------------------------------------
Version 4.2
Changelog:
- new language engine
- english, spanish, indonesian
- better file locations & file optimizations
- new ota scripts
- fix's & improvements
-----------------------------------------------------
Version Offline 4.2
Changelog:
- first release
- same changelog as version 4.2, but without ota scripts and without the update engine
-----------------------------------------------------
Version 2.0
Changelog:
- new engine
- some UI fix's and improvements
- auto update engine
- ota notification engine
- better scripts
- better edits & scripts for the twrp part
- same for teh rom part
-----------------------------------------------------
Version 1.3
Changelog:
-delete release engine
-create release & download engine
-ui fix's & improvements
-engine fix's & improvements
-update updater scripts
-fix extract scripts
-update credits
-create version rules
-easter egg
Woo nice man, i have usb debugging enabled on stock pie when i enter adb toolkit and select flash rom i get could not detect the active partition used, please ensure your phone is plugged in and in fastboot mode.
Press any key to retry..
when i whant to flash a ROM
boot into TWRP failed.
what can I do?
Thanks
Thanks
If I install twrp permanently, will I lose the OTA updates?
bavmouse said:
when i whant to flash a ROM
boot into TWRP failed.
what can I do?
Thanks
Click to expand...
Click to collapse
try to change the usb port
BassB said:
try to change the usb port
Click to expand...
Click to collapse
thanks! after changing the usb-port the toolkit works fine. everything was flashed, rom, twrp, hex, magisk. but after reboot in system i hang now in bootloop, after few minutes device powers off and wenn i start again it stocks on androd one logo for a few minutes, until device power off again. what went wrong? thank you.
EDIT
without hex it works fine-
awesome!
will try later
Hi,, does it work on the V10.0.2.0 ???
Can i temp root and go back to unroot??
Thks
royaltartufo said:
Hi,, does it work on the V10.0.2.0 ???
Thks
Click to expand...
Click to collapse
It works on V10.0.2.0 for me.
Can u add update ROM also
Matteo said:
Hey ! Today i will share you my new project, the "Mi A2 Xtrem Toolkit" !
Click to expand...
Click to collapse
I think you should update the HEX kernel that is included with this tool. The previous version causes bootloops. Use the latest one from telegram.
Edit - Sorry, I didn't see that you haven't included files of your own. The user needs to add them.
The provided TWRP isn't decrypting user data on V10.0.2.0 :/
Is it possible to used it for enabling camera2 API?
xdxita said:
The provided TWRP isn't decrypting user data on V10.0.2.0 :/
Click to expand...
Click to collapse
That's why we use sideload... Read everything next time.
Matteo
GK_NL said:
Is it possible to used it for enabling camera2 API?
Click to expand...
Click to collapse
Maybe in the next alpha build.
Matteo
The Toolkit linked in the thread is outdated. I will update it in some hours.
Changelog :
- new engine
- now stable
- auto update ( don't need to download a specific file or something like that. The Toolkit will does everything )
- some fix's and improvements
sakiyo said:
Can u add update ROM also
Click to expand...
Click to collapse
I will check that. Thank you for your support. When the new build will be pushed you will be able to contact me using the toolkit. It will allows user to have better support than on XDA.
Matteo
Matteo said:
That's why we use sideload... Read everything next time.
Matteo
Click to expand...
Click to collapse
Matteo, problem is that I need to access /data to remove a faulty magisk module that is causing bootloop. So far my only 2 options are wait for a fully working recovery or format /data.
Related
PRIME! v1.6
This is a custom rom for the Asus Eee Pad Transformer TF101
Special thanks to: Hacre | afm | MoDaCo | dc13 | supercurio | Bumble-Bee | RaYmAn | netarchy | Vividboarder | CurtisBeef
This rom is a work in progress and all feedback is appreciated. It has everything that the stock rom has to offer with a few modifications designed to provide a better user experience. As always whenever installing any rom, please ensure that you are fully aware of what you are doing as no one enjoys seeing their pride and joy end up bricked or stuck in a boot-loop (although these are easily fixed if either were to happen so don't panic in the event that something goes wrong).
Instructions:
1. Copy ROM to sdcard
2. Verify the MD5 of the zip on the sdcard, DO NOT FLASH IF THIS DOESN'T MATCH THE MD5 UNDER THE DOWNLOAD LINK!
3. Boot into clockworkmod recovery
4. Take a nandroid backup (optional but highly recommended)
5. Install the ROM
6. Reboot and wait... The first boot may take a while...
7. After a successful restart, you can change one of the power mod or remove it if desired.
Rom Details:
Android 3.1
GPS - V1.3.2
WiFi - V5.1.50
Bluetooth - V6.17
Kernel - 2.6.36.3-g3eb19ec
Build - HMJ37.prime_epad-1.6-20110716
MobileDock - EP101-0209 (Prompts for install after first boot if required)
See the second post of this thread for the changelog
Known Issues:
In Prime 1.6 if you flash a custom kernel you may experience a slight drop in performance due to a change in the way Prime optimises I/O performance.
Install this patch in CWM to resolve the issue. - http://kan.gd/uij - This has been fixed in 1.6r2
Battery History option in Spare Parts triggers F/C
Download Links: - Main Rom (You need this one)
PRIME! v1.6 (HMJ37.prime_epad-1.6-20110716)
Alternate Link
MD5: 574d34b0923cd5ef03762ae5357acc93
Torrent Link - Thanks Aligatro
NVflash version now available: http://kan.gd/up2
Uncompress the image files into a folder and see Androidroot.mobi for details on how to flash.
Kernel - Only required to return from other kernels
Prime_v1.6_Kernel.zip
Alternate Link
MD5: d45a27115e2ac0c22659a131abb075bc
Previous versions:
PRIME! v1.5 (HMJ37.prime_epad-1.5-20110626)
MD5: 13a0923e7ad178de2ae7636cd0f628a3
Power button mods
These mods give you either a reboot or reboot to recovery option when you long press the power button.
REBOOT power button mod
Alternate Link
MD5: fc17f4bbbd37aa6dbf163604484bb3ba
RECOVERY power button mod - (included in rom)
Alternate Link
MD5: bb8b361f024246f0a8f06a06f2ee47ed
REBOOT and RECOVERY power button mod - (there is no shutdown option with this mod but some people dont ever need to)
Alternate Link
MD5: d7d7e2abca184dc59e1b912183539b3a
Changelog:
v1.6r2
Fixed I/O Performance
v1.6
Based on 8.4.4.11-20110711
Wifi enabled for chan's 12 and 13 - see 2nd post for instructions
Power mods translated to most languages thanks to CaNsA
Bash 4.2 binary added
Sqlite3 binary added
Google Maps updated to 5.7.0
Further optimisation of scripts to improve loading times
Power mods updated
sh linked to busybox to enable colour and tab completion
v1.5
Hybrid of 8.4.4.5 and 8.4.4.7 releases
Asus updated apps for the 8.4.4.7 release are inlcuded except for Splastop Remote wich was generating F/C's
Custom kernel compiled from asus source with built in cifs/tun support
Voodoo sound driver v1 kernel mod (Thanks to supercurio)
Added init.d scripts with working cron scheduler
Various performance tweaks via init.d and kernel mods
Added Terminal Emulator
Google Maps updated to 5.6.0
Updated SuperUser and su
New custom busybox 1.19.0
Ad-hoc wifi support via wpa_supplicant
Added InputSetting app to allow disabling of the touchpad tap to click (Thanks to Netarchy and Vividboarder)
Reboot to recovery mod installed by default but this can be changed or removed as desired. See the download section for details
v1.4
Based on 8.4.4.5-20110527
Insecure Boot thanks to Bumble-Bee
The First HC3.1 fully deodexed, optimised and zipaligned rom
CIFS and TUN modules added
Updated boot animation for HC3.1 thanks to Curtisbeef
Google Music updated to 3.0.1
Google Maps updated to 5.5.0
Power button mods available - see download section
v1.3r2 - bugfix release
WW version now based on UK OTA Update 8.2.3.13-20110511
Corrected issue with Google Talk F/C
Corrected issue with Double Tap not producing a full stop
Modified image in MyGazine App - feedback appreciated
v1.3
Based on US OTA Update 8.2.3.13-20110511
Deodexed and Optimised by dc13
Bluetooth and Wifi updated
Asus Keyboard Dock FW included for optional flashing (TF101-EC-0209)
New Boot animation thanks to Curtisbeef
v1.2
US and WW versions now available
The Transformer's first custom kernel with CIFS/TUN/NTFS compiled in - Thanks to afm, RaYmAn and Bumble-Bee for their efforts.
CifsManager
Google Maps updated to 5.4.0
Google Books added from stock US rom
SDCard Speed Fix thanks to brainmaster
v1.1beta2
Added Google Maps 5.3.1
Further optimised system apps, feels much smoother.
Removed DMClient (Asus FOTA Updates)
v1.0
Superuser
Busybox
Spare Parts
Ext4 performance enhancements
About wifi support for channels 12 and 13 in Prime 1.6
When set to US mode the Transformer does not see chans 12 or 13. This is the default behaviour on US and WW roms. In EU mode these channels can be used.
To allow the TF to set EU mode please wait until three minutes pass on the first power up and then restart your transformer. This is after fresh install or factory reset.
US/EU mode can also be toggled by running /system/etc/setwifi.sh from a cli and you can check whether you are in EU or US mode by looking at the flag in /data. If this is removed the TF will set EU mode automatically on next reboot.
Strange codes appearing in Dos windows using ADB
The reason you see are seeing strange stuff in ADB with windows is because the dos prompt cannot interpret the colour codes. You have two solutions.
1- enable colour support using this - http://adoxa.110mb.com/ansicon/index.html
2- disable colour support...
Code:
alias ls='ls --color=never'
Spare Parts, newest OTA - sounds like fun, will try when I get home
Working well so far, installed over the top of dc13s rom with no issues.
Cheers
I installed this fine thanks loads.
Would be nice if the asus update reminder could be taken off. I keep getting prompted to download it. I saw the thread about removing it but would rather a more permanent solution without the use for 3rd party apps.
Will give it some testing tonight
be_vigilant said:
I installed this fine thanks loads.
Would be nice if the asus update reminder could be taken off. I keep getting prompted to download it. I saw the thread about removing it but would rather a more permanent solution without the use for 3rd party apps.
Will give it some testing tonight
Click to expand...
Click to collapse
The Update tool is coming out of my next rom.
Will there be a rom that can be applied over the 20110423 rom update?
NMCBR600 said:
Will there be a rom that can be applied over the 20110423 rom update?
Click to expand...
Click to collapse
Not until there is a way to get custom recovery running, there is an exploit being developed but it was based on the first update. It's currently being tested against the second update (20110423).
Roach2010 said:
Not until there is a way to get custom recovery running, there is an exploit being developed but it was based on the first update. It's currently being tested against the second update (20110423).
Click to expand...
Click to collapse
there's a new root method in the root thread, FYI
New version out...
Also I must ask, does this keep my own apps and settings?
Yes, just flash and reboot and you won't lose your stuff.
For peace of mind though you should take a nandroid backup first, it's good practice to always do this before flashing any rom.
Oh I know, I've been flashing ROMs on my HTC hero since day 1
has this been tested with a US transformer yet?
I have only got a UK device to test my roms on but if you want to flash it and provide feedback then that would be greatly appreciated.
seshmaru said:
Oh I know, I've been flashing ROMs on my HTC hero since day 1
has this been tested with a US transformer yet?
Click to expand...
Click to collapse
Works fine.
corruptz0r said:
Will this work on US TF101's?
Click to expand...
Click to collapse
read the post above yours.
Also testing it myself now.
Just flashed it over stock US version, works fine so far.
Hmm. As soon as I try to start the camera I get a reboot. Using a US Transformer
dictionary said:
Hmm. As soon as I try to start the camera I get a reboot. Using a US Transformer
Click to expand...
Click to collapse
Confirmed here too.. UK
Have removed quite a few apks from system though.
Hmm, my camera sorta works, I get a nice green picture fom the back camera and the front one is ok. I'll do some testing.
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
I've been added on to this post as a contributor, so now you can direct blame my way. (Oh yeah, I'm @Hachamacha on this board.) All credits to Phil3759 and the guys the made CM11 happen.
Just added the 6.58.7 build (see main thread) and has a number of enhancements and is likely the final build for months: You can download from the usual spot in either .img or .zip format. Keep in mind that on this device I'm just a builder and don't have any of the "moto g" devices myself so all testing is in your hands.
Click to expand...
Click to collapse
6.58.7
- Source Update and Fixes
Click to expand...
Click to collapse
Update v6.57.8 / CWM 6.0.5.1 / libtouch_gui 1.41
- fix for ROM OTA updates generating two install scripts (openrecovery + extendedcommands)
- merge CWM updates to selinux permissions for init services
- fix adb for 3.10 kernel
Click to expand...
Click to collapse
6.57.5
- Update SuperSU
- merge a few SR/CWM changes and bug fixes
- fix aroma file manager issue with some slow mount/unmount devices
Click to expand...
Click to collapse
6.55.0
-add option to disable md5 from edify restore_rom command line
- this fixes restore of custom roms
Click to expand...
Click to collapse
6.54.9 - libtouch_gui 1.40
- support faster transfers through USB storage for voldmanaged devices
- fix compiling for devices with custom recovery key or ui files
-- This version adds many enhancements in the code to better support storage volumes
-- USB mount should have now good transfer speeds for vold volumes if you add needed entries in extra.fstab
Click to expand...
Click to collapse
Notes regarding 6.50.6:
- fix potential failure for TWRP backups (cause scan_mouned_volumes() not called)
- loki_recovery code clean up
- fix potential failure to reboot when checking config file
- never confirm wipe in ors scripts
- always show text in sideload mode
- support wipe_cache and clear_display edify script commands
Click to expand...
Click to collapse
Notes regarding 6.41.6:
- update exfat to dorimanx 1.2.9 latest sources
- fix compile error when enabling BOARD_RECOVERY_USE_BBTAR
- repo sync latest sources
- Galaxy Tab Pro 8.4 WiFi SM-T320 (mondrianwifi)
- HTC M7 variants: use new cm kernel with exfat sources
- HTC M8 variants: use new unified recovery
Click to expand...
Click to collapse
6.41.5 - Stable
- libtouch_gui 1.21: auto detect BRIGHTNESS_SYS_FILE path if it is not set during compile
* search for the file in most common locations
* if found, save it to recovery settings ini file to be called on next recovery starts
* else, disable adjust brightness function to avoid error logs on recovery start
- fix various compiler warnings and errors
- enhance pre-compile setup
- dedupe: merge clean up code from @xiaolu
- merge: fix restorecon_from_file potential crash from @xiaolu (only for BOARD_RECOVERY_USE_BBTAR)
- fix 240x320 images
- merge "cwm: Honor recovery variant "
- merge "cwm: Remove hardcoded paths"
- merge "Keep 'show log' on screen until user dismisses it"
- create /data/media directory after internal storage is wiped
prevents denial to read/write from internal storage under some circumstances
- open source touch_gui library
- update licence files
Click to expand...
Click to collapse
Download links
Last version can be found here:
Moto G (falcon)
- Unified device for xt1028, xt1031, xt1032, xt1033, xt1034, Google Play Edition: falcon
Build Links:6.58.7: Img: http://d-h.st/DEw : Zip: http://d-h.st/Dbh
Build links: 6.57.9 : Img : http://d-h.st/kgN : Zip : http://d-h.st/Unh
Build links: 6.57.8 : Img : http://d-h.st/FLK : Zip : http://d-h.st/vzql
Build links: 6.57.5 : Img : http://d-h.st/lTD : Zip : http://d-h.st/D8y
Build links: 6.55.0 : Img : http://d-h.st/ljR : Zip : http://d-h.st/Seu
Build links: 6.54.9 : Img : http://d-h.st/3GH : Zip : http://d-h.st/N6G
Build links: 6.50.6 : Img : http://d-h.st/Lwx : Zip : http://d-h.st/F8Y
Build links: 6.41.6 : Img : http://d-h.st/LmY : Zip : http://d-h.st/KUS
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
XDA:DevDB Information
[falcon][CWM Advanced Edition] PhilZ Touch, Tool/Utility for the Moto G
Contributors
Phil3759, hachamacha
Version Information
Status: Stable
Created 2014-05-11
Last Updated 2014-10-21
FIRST TO REPLY! NICE!! whats the ETA for the upload to the goo.im?
At last we got a fully stable recovery.
Hey wait wait. wait.. wait... wait....
Brought to you by my own mmmmuuuuffffffffiiiinnnn
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/falcon
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/xt1032
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/xt1033
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/xt1034
Thx phil really appreciated
done uploading xt1032, xt1033 and xt1034
Let me know about any bug
Very nice. Not fully usable for GPE devices though, cannot mount /data partition supposedly because it is fomatted to ext4 not f2fs.
Seemed to backup as expected going todo a restore now ill let you know how it goes.
I did a full cleanup before i was going to restore the rom it seems to have deleted the backup.
drfr said:
Very nice. Not fully usable for GPE devices though, cannot mount /data partition supposedly because it is fomatted to ext4 not f2fs.
Click to expand...
Click to collapse
What is GPE ?
If you need ext4 vs f2fs, let me know which devices should be fixed
Phil3759 said:
What is GPE ?
If you need ext4 vs f2fs, let me know which devices should be fixed
Click to expand...
Click to collapse
Google Play Edition
Enviado desde mi XT1032 mediante Tapatalk
GPe Moto G uses ext4 instead of f2fs. Working fine on XT1032 running 4.4.2.
Does anybody know if this also works with 4.4 on XT1033?
lost101 said:
GPe Moto G uses ext4 instead of f2fs.
Click to expand...
Click to collapse
They have same code (xt1032...) ?
Phil3759 said:
They have same code (xt1032...) ?
Click to expand...
Click to collapse
I believe so.
http://forum.xda-developers.com/showthread.php?t=2622323
One other thing, the date in CWM is wrong; backup today was labeled: 1970-02-14.11.06.59_KLB20.9-1.10-1.9
i get the 'can't mount backup path' error... what do i need to do to get rid?
lost101 said:
I believe so.
http://forum.xda-developers.com/showthread.php?t=2622323
One other thing, the date in CWM is wrong; backup today was labeled: 1970-02-14.11.06.59_KLB20.9-1.10-1.9
Click to expand...
Click to collapse
You can go into the settings and manually change the date.
Will this recovery be able to install OTA updates for stock rooted ROM?
jamesro1208 said:
You can go into the settings and manually change the date.
Click to expand...
Click to collapse
Where can i find those settings? For me is showing '2024-02-13....' after backup.
Sent from my Nexus 7 2013 using xda app-developers app
jamesro1208 said:
You can go into the settings and manually change the date.
Click to expand...
Click to collapse
Settings where?
rapunzel11 said:
Where can i find those settings? For me is showing '2024-02-13....' after backup.
Sent from my Nexus 7 2013 using xda app-developers app
Click to expand...
Click to collapse
michalurban said:
Settings where?
Click to expand...
Click to collapse
PhilZ Settings - GUI Preferences - Time Setup
Hi.! welcome to Suemax kernel thread for marshmallow update
Supported Device N910C/H/U
Change log :
Pure Basic v3.2 TEST Release
1.) Added Fake Enforce option (Magisk only)
2.) SaftyNet workaround and Bypass (Magisk only)
3.) Hide- red seandroid enforcing at boot (ONLY for SuperSU systemless)
Pure Basic v3.1 Last Release
1. Updated Linux Patch to 3.10.105
2. Updated Ramdisks to latest verions
Pure Basic v3.0 Previous
1. SM-N910C_SEA_MM_Opensource_N910CXXS2DPK7
2. Linux version Patched to 3.10.104
3. Updated ramdisks to N910CXXS2DPL8 & N910UXXS2DPL1
4. I/O Schedulers: sio,sioplus,tripndroid,Vr & zen
5. Added UX (Note7) + Stock firmware Support
6. Added CPU
+ALUCARD:
+BIOSHOCK
+INTEREXTREM
+LIONHEART
+CONSERVATIVEX
+IMPULSE
-(Ondemand + Conservative Disabled)
NOTE : Rest of changes Same as v2.0
v.2.0 (new)
1. Fixed private mode (Un-tested)
2. ADB insecure (now work with Android 6)
3. Updated ramdisk script
v1.0b
Has same change log but only compiled at my work station with initial Changes :angel:
v1.0
CPU
a. ) Enabled Ondemand & Conservative governor
b. ) Added Bio-shock governor
c. ) Added Lionheart governor
d. ) Added INTEREXTRE governor
Other Cpu tweaks
a. ) Added Freq relationship C ( For more power saving )
b. ) Tweaked Interactive Cpu governor & More
File-System support
a. ) NTFS
b. ) F2FS
c. ) CIFS
Other Miscellaneous Supported drivers
a. ) MS XPAD game controller support
b. ) ISO & UDF CDROM support
Miscellaneous Support for System
a. ) CLEANCACHE & ZCACHE
Network TCP Ipv4
a. ) enable all TCP Congestion Algorithm in-built - Westwood+ default
SELUNIX : Permissive
Ramdisk-changes
a. ) Added auto-Busybox install (If not there in system xbin)
b. ) Added init.d script (Automatic enable if not in rom )
c. ) Added other tweaks for wifi password save on reboot , Screen Mirror fix and disabled security Tima and Knox
Note : Use kernel Adiutor to control kernel and setting Playstore
Read this F.A.Q
1. Kindly do not ask ETAs & Special requests if asked will be just ignored .
2. Reporting Bugs : Kindly detail your issue with Device(model) Firmware (Stock or custom rom Name) and with possible Logs e.g valid Logcat
3. Kindly Stay on kernel thread topic.!
Version Information
Status: Stable (No Snaypse support)
Current STABLE: v3.0
Android: 6.0.1 (N910CXXU2DPCB)
Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_BASIC_MM
New
Pure Basic Kernel Source : https://github.com/djmax81/Suemax-kernel_Exynos5433_MM_Plus
Download :
v3.2
Download Pure Basic v3.2-N910C/H
N910U - SOON
v3.1
Download Pure Basic v3.1-N910C/H
Download Pure Basic v3.1-N910U
v3.0
Download Pure Basic v3.0-N910C/H
Download Pure Basic v3.0-N910U
Download Mirror (Android file host Mirror) Thanx @dicksteele
MIUI Support for N910C/H/U (Pure Basic )
v3.1
Download MiUi Pure Basic v3.1-N910C/H
Download MiUi Pure Basic v3.1-N910U
v3.0
Download MiUi Pure Basic v3.0-N910C/H
Download MiUi Pure Basic v3.0-N910U
v2.0
Download v2.0-N910C/H
Download v2.0-N910C/H (Android file host Mirror) Thanx @dicksteele
Download v2.0-N910U
v.1.0b
Download v1.0b-N910C/H
Updated to latest N910UXXU2DPC2 ramdisk
Download v1.0b-N910U
Link N910U Noise fix by not-i : http://forum.xda-developers.com/show....php?t=3228398
SCREENSHOT from v3.2
Reserved
Reserved
Great news. Thank you my friend!
thanks
Goodies coming
Sent from my SM-N910C using XDA Free mobile app
Nice I will test it when get MM update
Thank U!
beefx said:
Nice I will test it when get MM update
Thank U!
Click to expand...
Click to collapse
Thanx and do not forget to bug report if any and I will update thread with detail change log sooon.!!!!! :angel:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Delfinster said:
just flash via recovery. right ?? i am on mm poland...and i have root and twrp 3.0.2.0
Click to expand...
Click to collapse
Yes .! Flash zip via any custom recovery :good:
djmax81 said:
Yes .! Flash zip via any custom recovery :good:
Click to expand...
Click to collapse
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Delfinster said:
just flashed...everthing is fine for now ,,, i just lost all my wifi passwords but not that big deal
Click to expand...
Click to collapse
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
That was fast :good:
djmax81 said:
Reboot device again and Password will be back .!!! + do not forget to flash superSU .zip on top of kernel
Click to expand...
Click to collapse
lol..i just see that superSu not working :d i will flash right now thanks for that info
agentdeep said:
That was fast :good:
Click to expand...
Click to collapse
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Delfinster said:
lol..i just see that superSu not working :d i will flash right now thanks for that info
Click to expand...
Click to collapse
Yes .! With new superSU v2.7.1 + Its recommended to Re-Flash SuperSU .zip after any kernel update coz Now on SuperSU do changes to kernel Ramdisk
djmax81 said:
Hahaha.! Yup and you know what Gonna be fast my Next Snaypse supported Version Update :angel:
Click to expand...
Click to collapse
Will flash this and observe for few days :highfive:
Now is all okey and fine ....now testing kernel for couple of days..becose on mm battery is not that good
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Sapphire999 said:
Downloaded and flashed. Works fine! Only thing, that microsd nightmare still exists, same as on stock kernel. I wonder why TitaniumBackup and many other apps fail to get write write access even with root permission
Click to expand...
Click to collapse
its know firmware related issue on Stock roms.
you need to add this line to platform.xml
<group gid="sdcard_rw" />
via root Explorer dir System>etc>permission>platform.xml (With text editor)
Reboot device after
But if you got issue with presses then upload platform.xml (i'll edit it for you and all you need to do set permission and reboot or ican make flashable zip)
cheers
Eulah Rom
No , This Rom *Can Not* Be Used For Further Development Without My Permission .
Click to expand...
Click to collapse
Disclaimer
I am not responsible for bricked devices, dead SD cards, or any malfunction caused by carelessness. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you ! If it works and you are satisfied then I will claim all credits without leaving one
Click to expand...
Click to collapse
Main Aim Of This Rom
To Provide The Latest Samsung One UI Pie Apps & Features With All Exclusives Unlocked & Added To Our Device With Ease.
Click to expand...
Click to collapse
Rom Features
One UI Bases Rom With Latest Firmware & Security Patch
Magisk Rooted & Busy Box Installed
Has An Fully Tweaked Kernel So That User Can Have Sudo Access
Su.d, Int.d & Dm-Verity Patched
Fully DEODEXED Featuring Further Themabilty & Customization
Tweaks For Working Root Sensitive Apps
Twrp Internal Storage (Encryption) Fixed
Enabled All Possible Features With Other Exclusives Unlocked
Latest Pie App & Modded Features
(S10+) Media,Wallpapers & Theme
Added Lots Of Camera Options
View More Details :
Real Time Hdr Mode Both In Rear & Front Camera
Added Anti Fog , Photoshopping, etc Modes
Quick Focus
Motion Photo
HDR Video
Image Stabilisation
Ar-3D Emojis (Full)
Superfine Image Quality
G-Cam Included (Optional)
Overall Cam Optimization
Faceunlock
Network Speed Indicator
Fingerprint lock tweaks
Added Smart Cast IN Option
Added Multi User Option
Has Inbuilt Screen Recorder
Auto Zipalign Apps During reboot
Enabled Music Edge Lighting
Enabled Wifi/Volte Advanced Settings
One UI S10+ Media & Boot Animation
Enabled Live & Floating Messages
Full Aod With Agif, Theme, Brightness & More Options
Added SBike Mode
Included Memory Refresh
Full Bixby Integration
Added Youtube Vanced
Integrated Good Lock UI
FULL System One UI Apps
ButterSmooth UI & Animations
Major Csc Tweaks
Minor Performance Tweaks
Quicker Boot Time
Many More That I Forgot / Didn't Mention
Click to expand...
Click to collapse
# Click Here To View The Changelog For More Details About The Features & Changes In The Different Versions Of Eulah Rom.
-----------------------------
Review Video :
Tx to @Aish for sharing his Eulah Rom v2 review :highfive:
-----------------------------
Hit The "Thank / :good:" Button Below, If You Respect My Work
XDA:DevDB Information
Eulah Rom, ROM for the Android General
Contributors
jesvi, corsicanu , leexd
Source Code: https://github.com/jesvijonathan/Eulah-Kernel-SM-C701F
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Twrp , Latest Bootloader & Rom
Based On: Samsung One UI
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 2019-03-19
Created 2019-02-23
Last Updated 2020-08-12
Steps For Installation & Notes
1) Make sure you have the latest Bootloader
For more information on how to Flash latest Bootloader for C7/C7 Pro, follow the steps mentioned in this thread -
Latest Bootloader Flashing Guide
2) Make sure you have the latest TWRP recovery installed
For more information on how to install latest Twrp for C7/C7 Pro follow the steps mentioned in this thread -
TWRP Recovery Guide
3) Download the rom and transfer it to your Device
Download The Latest Version Of Eulah Rom Package & Move A Copy Of The Package To Your SD Card -
Scroll Down To The Download Section
4) Make sure OEM is unlocked in developer settings
There are three ways to unlock bootloader -
1st Method) To unlock OEM , Go to (settings/about phone/software information) and tap on "build number" 4 times , then go back to settings and you will see "developer options after "about phone" . Click on "developers option" and you will see and option called "OEM Unlock" select/turn that on .
2nd Method) Type "adb reboot bootloader" (without the quotes) in adb shell and accept the adb request in your device,
Then type "fastboot flashing unlock" or "fastboot oem unlock" (without the quotes) and press vol up if any prompt displayed
3rd Method) In case you dont have OEM Unlock in developers option, then follow this guide -
Oem Unlock Guide
5) Make sure you have at least 30%+ battery left
6) Boot your phone to Twrp recovery
There Are 2 Way To Boot To Recovery -
1st Method) By Holding The Three Key Combo For 15sec (Power Button + Volume UP Button + Home Key) When The Device Is Switched Off
2nd Method) By Typing "adb reboot recovery" (Without quotes) in adb shell
7) Do a FULL Data Format : (Twrp/Wipe/Format Data ) (Is A Must due to partition encryption in Stock):
Note : All your files from Internal Storage Will Be Deleted . So take a backup and place the rom in your SD Card, Otg or (copy the rom package from backup / PC to internal storage after formatting data incase you dont have a Sd Card)
8) Flash Eulah Rom
Drop the Rom Package (Eulah Rom.zip) into your device (If Not Done Yet) & Locate ("Eulah Rom.zip") in the location where you have kept it and install it (TWRP/INSTALL/<location where the rom is> ---SWIPE TO INSTALL)
Note : After Following All The Steps, You Should See The Eulah Rom Splash Logo . There After The Aroma Installer Will Guide You
9) Install Fix/Patch If Available
Now after installing the Rom / Installer setup, Place the fix file (If provided for a specific version of Eulah) in Your Device and locate it in your storage (via twrp) and flash it . (TWRP/INSTALL/<location where the Fix is>/ ---SWIPE TO INSTALL)
10) Reboot To System
Note : Wait patiently After Rebooting From TWRP After Installing The Rom... There Might Be 1-3 Bootloops during the First boot & It may take A While To Boot to system (7-15 min), After Setting up system make sure to reboot atleast 3 times to make butter smooth
Click to expand...
Click to collapse
Supported Variants
C7 Pro -
● SM-C701F
● SM-C7010
● SM-C7018
Click to expand...
Click to collapse
DOWNLOADS -
Eulah Rom v2 [19.3.19] (Latest) -
Download Eulah Rom V2.0 - (3 GB)
Download Fix/patch File For Eulah Rom v2 (100 MB)
Click to expand...
Click to collapse
Eulah Rom V1.1 [5.1.19] (Discontinued) -
#Download Eulah Rom v1.1 (3 GB)
#Download Fix For Eulah Rom v1.1 (10 MB)
Click to expand...
Click to collapse
SUPPORT GROUP -
https://telegram.me/eulah_rom
Click to expand...
Click to collapse
Don't Forget To Hit That Thank Button :good:
BUGS -
--- Bugs In v2 Fixed Via Patch, Fix File Available In Download Section ---
Note : Flash The Patch Zip File In TWRP After Installing The Rom From Twrp
(Flash The Patch Before Booting Into System). Once After Installing The Patch,
Boot To System And Set Samsung Dialer As The Default Dialer Application) & You Are Good To Go.
Click to expand...
Click to collapse
CHANGELOG -
Eulah Rom v2.0
Rom Date : 19-March-2019
Build Status : Stable
Based On : One UI Pie
Supported Devices/Variants :
~ SM-C701F & SM-C701F/DD (International)
~ SM-C7010 & SM-C7010/DD (HongKong)
~ SM-C7010 & SM-C7010/DD (Open China)
~ SM-C7000 & SM-C7000/DD (HongKong)
~ SM-C7000 & SM-C7000/DD (Open China)
What's New ?
• Added Aroma Installer Support
• Updated All System & Pie Apps
• Added Advanced Photo Editor
• Added G-Cam
• Magisk Safety Net Passes
• Data Icon Made Optional
• Integrated Full Pie Theme
• Added Navigation Bar Optioin
• Added One UI Font
• Added Pie Bixby Voice, Home, Routines, Etc
• Added S10+ Wallpapers
• Thread Layout Redesigned
• Fixed Led & Dual Sound Bugs
• Added One UI Animation & Extra Apps
• Added Several Options In Aroma
• Added Gcam
• Added Many One Features
• Added Video Wallpaper
• Added OneUI
Pie My Files
Pie Galaxy Store
Pie SmartThings
Pie PhotoEditor
Pie Good Lock
Pie Layout
Pie Sbrowser
Pie Video Player
Pie Bixby
Pie Finder
Pie Tasker Changer
Pie Clock
& Many More Pie Features From Previous Build
• Bloats, Dpi, etc Made Optional
• Made The Rom Lot Smoother and faster
• Fixed Dialer & Recents log
• Fixed Led Indicator
• Fixed Finder
• Fixed Alot Of Bugs
• Added Reminder
• Chanaged Base To S9+
• Lockscreen Black Out Fixed
• Added Wipe Option
• Updated Security Patch
• Modded Youtube & Touchwiz
• Added Latest IME (Multiple lang) & Live Drawing
• Added Ar 3D Avatar
• Updated RIL
• Ported Several One UI Apps & Features
• Added Dolby
• Boot Animation & Sound Made Optional
• Added Further Variant Support
• Refined Recents Menu
• Ported Pie Good Lock Goodies
• Removable Bloats Made Optional
• Patched Kernel
• Added Gl Tools
• Updated All System & Non System Apps
• Fully Deodexed, Debloated, Modded Rom
• Many Edits In Un-noticable Areas
• Updated Most Reources From Official One UI Dump
• Major Tweaks In Camera With Extra Features & Performance
• & Many More That I did'nt Mention Or Forgot
Click to expand...
Click to collapse
Eulah Rom v1.1
--Initial Build--
Rom Date : 5-Jan-2019
Build Status : Beta
Based On : One UI Pie
Supported Variants :
~ SM-C701F
~ SM-C01F/DD
Click to expand...
Click to collapse
CREDITS -
Jesvi (For Creating The Entire Rom)
corsicanu
Envy
Ananjaser1211
Voytec123
Click to expand...
Click to collapse
Kayalesh patel (Donar)
Taskas (Testers)
Click to expand...
Click to collapse
Extras -
Also Check Out New - Sudo Rom & Sudo Lite Rom For Galaxy C7/C7 Pro If You Haven't Already
Click to expand...
Click to collapse
Hit The Thank Button If You Respect My Work :good:
share some pix plz.
heartly waiting for uplod (c70101) ??
awesome work u did.. keep it up..
Uff very excited thanks for building this cant wait gonna download soon
Thank you bro
But there is little lag and phone memory is used upto 3 gb. Please fix this
CHGR1999 said:
But there is little lag and phone memory is used upto 3 gb. Please fix this
Click to expand...
Click to collapse
Did You Restart Your Phone ? As I Have Already Mentioned , It Will Lag Like Hell For The First 3-5 Min , Thereafter A Restart Would Will Make It Faaar Smoother Than The Stock Rom !
phenodev said:
Uff very excited thanks for building this cant wait gonna download soon
Click to expand...
Click to collapse
:good:
frhanhaider said:
share some pix plz.
heartly waiting for uplod (c70101) ??
awesome work u did.. keep it up..
Click to expand...
Click to collapse
I Have Every Thing Ready Except For One Thing I Am Halting The Rom , Its Coz SM-C7010 Does Not Have A TWRP , So First Get A Twrp Recovery Installed For C7010 Variants , Then I'll Upload Your Variant
UPDATE : C7010 variant support added , flash the rom via twrp ..
Hi Jesvi! Opening settings on bixby cause the application to crash. And the rom you provided works magnificently
sabindawadi said:
Hi Jesvi! Opening settings on bixby cause the application to crash. And the rom you provided works magnificently
Click to expand...
Click to collapse
Hmm ... I have the fix ready and will update it in the next update . Thanks for informing !
Hope you enjoy the rom ! Next update is quite big . So make sure you hit the like button if you like this rom ...
jesvi said:
Hmm ... I have the fix ready and will update it in the next update . Thanks for informing !
Hope you enjoy the rom ! Next update is quite big . So make sure you hit the like button if you like this rom ...
Click to expand...
Click to collapse
OK. Secure wifi is also not working. And is there a way to work with Samsung pass? As the rom is rooted, Samsung pass won't work with it. Also, Smart Lock 'face unlock' works well unless a voice unlock is added but once added the app won't work well. Samsung Internet doesn't work as well and nor play store. When downloading/updating apps from play store either 192 or 419 error code is displayed showing message can't download apps. Anyway, waiting for the next update for more fixes.
sabindawadi said:
OK. Secure wifi is also not working. And is there a way to work with Samsung pass? As the rom is rooted, Samsung pass won't work with it. Also, Smart Lock 'face unlock' works well unless a voice unlock is added but once added the app won't work well. Samsung Internet doesn't work as well and nor play store. When downloading/updating apps from play store either 192 or 419 error code is displayed showing message can't download apps. Anyway, waiting for the next update for more fixes.
Click to expand...
Click to collapse
1) secure wifi will be fixed in next update
2)Samsung pass will never work coz of root , instead use Google auto fill from(settings)
3)well , I think it is not possible to use two or more smart locks at the same time , anyway will t r y t o f I x I t .
4)Google play thing is your region problem or Google play lib not updated issue... just wait till Google play libs get updated ... :good:
Does it support dual 4G Volte?
Sai neeraj said:
Does it support dual 4G Volte?
Click to expand...
Click to collapse
Not possible , coz modem does not support dual volte ...
jesvi said:
I Have Every Thing Ready Except For One Thing I Am Halting The Rom , Its Coz SM-C7010 Does Not Have A TWRP , So First Get A Twrp Recovery Installed For C7010 Variants , Then I'll Upload Your Variant
Click to expand...
Click to collapse
Now also have the OEM unlocking issue in this variant
frhanhaider said:
Now also have the OEM unlocking issue in this variant
Click to expand...
Click to collapse
Try some guids from xda , till i know , you have to wait 7 days before unlocking dev mode and should not turn of mobile data for a week or so to get oem unlovk feature ,
Good luck with that :good:
Woah ! this rom is awesome! Thanks everything worked perfectly fine and the dialer fix also worked good .
Can you please add eulah rom control or something like that ? To turn on night mode and stuff . It will be usefull
Debloating the rom is necessary coz i dont use most of inbuilt bloat apps
Thanks for the rom
Do you have any plans to port One ui android pie rom for this device in near future?
---------- Post added at 03:33 AM ---------- Previous post was at 03:29 AM ----------
Guys help me out with a suitable google camera app for Samsung Galaxy c7 pro. I'm struggling to get one.
frhanhaider said:
share some pix plz.
heartly waiting for uplod (c70101) ??
awesome work u did.. keep it up..
Click to expand...
Click to collapse
Updated the thread , now c7010 variant support has been added (dont wipe system while flashing ).
Hit the thank button and Enjoy !:good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WELCOME TO 420 ROM - MAGISK ROM FOR SAMSUNG GALAXY NOTE 10 + 5G N976B & now N975F/0F!
Telegram-Group
Please bear in mind that things will be added as and when my learning and time permits (being a dad with a family and having ADHD myself means things get a lil gnarly) but i will aim to support this ROM as regularly as possible.
Ill usually release a test to one or two users before each release also :cyclops:
CUSTOMIZABLE MAGISK ROM FEATURES: - with Vol +/- keys
-Add YouTube Vanced - thanks to Vanced peeps github
-Add 3minit battery - thanks G Harrington - if online menus don't appear, install the apk that the module places on your internal storage in the 420rom folder.
-Add 3minit clock - thanks G Harrinton
-Add V4A (MAKE SURE YOU INSTALL AUDIO MODIFICATION LIBRARY V3.5 BEFORE STARTING V4A!!! - available in Magisk Repo)
-Add Quality bootanimation thanks to @chalmizzle
-Add SamsungSans fonts apk
-Add Goodlock
-Add SoundAssistant (for increased vol steps)
-Add Customized Secsettings (420 banner in every phone info screen)
-Add Custom wallpapers
-Remove Chrome
(further debloat options for stock rooted base)
-Remove Bixby
-Remove Netflix
-Remove kidshome
-Remove Facebook_stub
-Remove FBservices
-Remove Upday
-Remove Onedrive
CORE MAGISK ROM FEATURES
-installs custom secsettings
-Detects OMC code and ensures correct OMC folders and files installed
Enabled the following CSC fetures:
-Net-speed indicator in status bar
-Data usage in quick settings
-Call recording enabled
-Disabled SMS to MMS conversion
-Caller & Spam SMS protection
-Camera features
-vibrate for notifications incall
-enabled text templates
-MMS with data off enabled
-and a few more!!!
GOOGLE EDITION FEATURES (FURTHER TO THOSE IN MAIN MODULE ABOVE
This Module is based on the main Main 420rom Rom Module but replaces some of the Samsung apps with Google ones. It is recommended to backup your Samsung apps 1st!!!
Installed with Module - Samsung App it replaces
--------------------------------------
Google Phone - Samsung Phone
Google Contacts - Samsung Contacts
Google Messages - Samsung Messenger
Google Chrome - Samsung Internet Browser
Google Calculator - Samsung Calculator
Google Calendar - Samsung Calendar
Google Clock - Samsung Clock
Google Drive - Samsung Cloud (stays installed)
Google Files - Samsung MyFiles
Google Fit - Samsung Health (can be reinstalled from Galaxy Apps)
Google Pay - Samsung Pay
Google Keep Notes - Samsung Notes
Google Photos - Samsung Gallery
Google Recorder - Samsung Recorder
Google TTS - Samsung TTS
Google Duo - n/a
Google News - n/a
Google Tasks - n/a
Google Sounds (Sound Picker) - n/a
Google Apo - n/a
Google Carrier Services (for RCS) - n/a
GBoard - Samsung Keyboard
GMail - Samsung Email
YouTube Music - Samsung Music
YouTube Vanced, Vanced Manager & Vanced MicroG - YouTube
Nova Launcher - OneUI Launcher
RECOVERY FLASHABLE BASE FEATURES
-One for each note device supported
-Does away with warning on splash option in Aroma
-Installs up to date SHRP recovery
-Debloated
-rebased with each firmware update (when possible)
-contains 420rom kernel based on cruel
SKY HAWK RECOVERY PROJECT FEATURES BIG THANKS to Skyhawk peeps and @abun880007
Clean & Modern Design
All New Dashboard
Security Features
Theming Support
Magisk Support and Features built in
Extra Modules and Tweaks
Changelog:
v11.0
Complete Rewrite of installation procedure please refer to Post #2 on XDA
Rom Module
- Updated source base to EUA5 Sec Patch 01-2021
- Vanced Manager updated to 2.3.0
- Performance and Bug fixes
Rom Base
- Updated source base to EUA5 Sec Patch 01-2021
- Performance and Bug fixes
v10.1.3
Rom Module
- Updated Google apps (Google Edition only)
- Performance and Bug fixes
Rom Base
- Updated Kernel with Magisk 21.4
v10.1.1
Rom Module
- Fixed SafetyNet it now passes
- Updated Google apps (Google Edition only)
- Google Emojis are now a optional install (Google Edition only)
- Updated Nova Launcher to 7.0 beta 14 ( Google Edition only)
- Script updates
- Performance and Bug fixes
Rom Base
- Updated Kernel with Magisk 21.3
v10.1
Rom Module
- Updated source base to ETLL Android 11 OneUi 3.0 Sec Patch 12_2020
- Fixed wallpapers
- Updated Google apps
- Updated Nova Launcher to 7.0 beta 11
- Script updates
- Performance and Bug fixes
Rom Base
- Updated source base to ETLL Android 11 OneUi 3.0 12_2020 sec patch
- Updated SHRP Recovery to 3.0
- Fixed SHRP flashing certain zip files
- Updated 420rom Kernel to 11.1.1
- Performance and Bug fixes
v8.2 Changelog
Rom Module
- Fixed CSC Mods on Note 10 N970F
- Fixed System information in Settings on Note 10 N970F
- Performance and Bug fixes
Known Issues
-Viper4AndroidFX does not currently work with the Rom Module
v8.1 Changelog
Rom Module
- Re-added Note 10 N970F to the Rom Module (must be on Stock Rooted Base)
- Added Selectable CSC features (so you can now choose which ones you want and don't)
- Performance and Bug fixes
V8,0 Bases and Rom Modules have been Released
Changelog
v8.0
Rom Module
- Files Rebased to DTJ4 11-2020 Security Patch
- Performance and Bug fixes
- Updates all included Apps For Samsung and Google Editions
Module Base
- Files Rebased to DTJ4 11-2020 Security Patch
- Magisk Manager updated to 8.0.3
- Performance and Bug fixes
v5
Rom Module
-Added multi OMC code support - the module will detect your OMC code, OXM, OWO etc etc, and apply the relevant OMC folders to ensure no clashes with the product partition and the CSC features etc. - Basically supporting every CSC's firmware available on sammobile for N975F and N976B
-Files rebased to CTGA
-Big install script tidy up and recode using functions
Module Base
-Rebased to CTGA
-The base changes to no red warning boot automatically - PM me and i'll show you how to disable this
-Latest 420rom kernel based on cruel added
-Latest SHRP recovery added to base
v4/v.1
-Test beds for new multi OMC code support - Not released - rebased to CTG1
v3.1
-Fully odexed everything - Rom module will now work very smoothly on either 420rom module base or Rooted Stock
-added youtube vanced option
-added 3minit clock option
-added final fix for 3minit battery
-module bases have been fully odexed
v3.0
Rom Modules:
-massive overhaul of script and module structure to bring the 5 supported devices into one zip. - 5 device all in one solution!
-fix for bluetooth pairing issue on root - thanks @3arthur6
-rebrand of module and added a few wallpapers
Module Bases
-One for each note device supported
-Do away with warning on splash option in Aroma
-Install SHRP recovery option
-Install correct CSC files based on your CSC - Just select your CSC from the list in Aroma
-Much much cleaner installation experience than previous bases thanks to the newly implemented and aforementioned AROMA!!
v2.0
-Module recognizes whether you're on stock rooted or our base rom and gives you the relevant custom options on install - big script re-rite hence v2.
-Fixed 3minit battery as res folder was in wrong app folder.
-improved and more informative installation experience.
-new way of implementing multidisabler in rom
-lastly we now have our own team SHRP recovery!!!!!
V1.3
-Rebased to CDT1 on both devices
-WALLPAPERS added to wallpaper-res.apk
-3minit battery added
-Option to re-add bixby (if you use that lol)
-hopefully sorted out carrier bloat after Dr Ketan's advice
V1.2
-DEBLOAT - fix for bixby removal (missed an apk in 1.1)
-CHAT SETTINGS - restructured omc folders for the gazillionth time to fix RCS chat settings (took ages to work this out lol) all good now, cscfeatures AND chat settings now perfect
-SECSETTINGS - 420'd secsettings in both module and rom (you have an option of either custom secsettings app, 1 with logo only in software information, the other has a 420 banner on all phone info screens, selectable as an option at install)
V1.1
-added samsung daily under Bixby options
-fixed upday not removing
-fixed kids home not removing
-fixed facebook not removing
V1.0 - first non Beta release!!!
-extensive changes to omc folders and code for features - CSC features are now injected into the xmls depending on what CSC you are under!! (rather than replacing the xmls with a crappy generic copy) - this should drastically improve reliability and hopefully not break anything - I removed one or two defunct features.
-rebased to CTC9 (Both devices)
-made remove system update a standard feature
-added Bluetooth fix for gear - thanks @onkel_tom and @lupin (and anyone else involved)
-will include pairing on reboot as soon as tests allow. - I had a pretty nasty crash earlier today - need to make sure that's not this
v0.6.3
-the knackered mule the work for v1 was done on - not released
v0.6.2
-added option for installing v4a
-added option to remove Tips
-added tonnes of prop tweaks
v0.6.1
-Rebased files to BTC1 (N976B) & BTB9 (N975F)
-Added option for custom 420 Bootanimation
-Added option for GoodLock
-Added option for SoundAssistant
V0.6 - Not released
-Worked out vol +/- custom install options:
-Add SamsungSans
-Remove Bixby
-Remove Chrome
-Remove Netflix
-Remove kidshome
-Remove software update
-Remove Facebook_stub
-Remove FBservices
-Remove Upday
-Remove Onedrive
v0.5.2
-knox remains (for now)
-removed FBservices
-removed all bixby crap apart from the useful camera bits
-removed chrome
-removed netflix
v0.5.1 - Unreleased
-Final rework of OMC folders in module so that bear minimum is replaced - 5g should now be fixed for all users - thanks @Leeum for testing fix
-partial success at removing knox - thanks @abun880007 - we'll keep on this
-removed bixby
-removed facebook
v0.5 - "Durban Poison"
-REBASED TO MAGISK MODULE - INSTALL VIA MODULES IN MAGISK!!
-removed facebook_stub
-removed upday
-New Bootanimation Included
v0.4.1 - "Purple Punch" - Rebased to BTB4 firmware
- Feb sec patch
- added the following to CSC Fetures
-camera features-vibrate for notifications incall-enabled display mirroring-reboot with safe mode enabled-control font size with volume keys in messages-enabled text templates-MMS with data off enabled-Enabled full context menu in messages-enabled add sender info when forwarding-enabled block call message-enabled dual dashboard in smart manager-enabled call reject count (voice recorder)-enabled clear today's history (web)-enabled home page option (web)-enable visible wifi password (presumably when entering password)-and a few more!!!
v0.4 - Never released.
- a futile attempt at merging multidisabler - if anyone can help please shout lol
previous versions...
V0.3.1 – Based on BTA1/2 firmware
RO-Knox and TIMA bollox set to zero
CSC features now applied to all CSC folders
Removed software update and FOTAagent.apk
V0.3 – Based on BTA1/2 firmware
Fixed 5G Connectivity
Restructured OMC folders to provide Multi CSC support
Applied CSC features to most OMC folders
Fixed Camera Force close bug
V0.2 – Based on BTA1/2 firmware
-(edit) this version was dog s##t :silly:
V0.1 - Based on BTA1/2 firmware
Magisk 20.3 included - thanks @topjohnwu
Zipaligned framework apps
removed DM_Verity
removed Force_encrypt
removed knox
debloated basic crap
whats next? & Known Bugs we can't do much about or will sort eventually
-if A SYSTEM APP hasn't been removed, try uninstalling it you should now be able to - any updates installed over an original system app remain as they are data apps following an update - small yet annoying bug - i'm on it
CORE DEV TEAM
Myself - team owner and Rom Module chef
@abun880007
Huge thanks to.................
@sevsman for the work on the module bases up to now. all the best in whatever you do going forward!:good: & for the Multidisablers
@abun880007 for the bullet proof testing and everything else!!!
@Didgeridoohan for the magisk assistance and @Zackptg5 for the brilliant MMT Extended zip
Rooted with Magisk - thanks @topjohnwu
@dr.ketan for the various pointers given
@topjohnwu for magisk
@Winb33) for the samsungsans7.2 fonts
@superr for the awesome kitchen
@starbucks2010 for help with our awesome CSC features implementation
@speedyjay for GDRIVE file hosting!
@Zackptg5 and @~clumsy~ for your help in getting Vol Custom Install working!!!
@Team_DeWitt for the Awesome V4A 2.7 - a must have for audiophiles!!
G Harrington for the 3minit apps
Team Vanced for bringing us all youtube Vanced
DOWNLOADS
420roms Downloads Folder
XDA:DevDB Information
[MAGISK Rom / Recovery Flash-able Base / Recovery], ROM for the Samsung Galaxy Note 10+
Contributors
exocetdj, abun880007
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: Magisk MMT Extended template & Samsung Firmware
Version Information
Status: Stable
Current Stable Version: v11.0
Stable Release Date: 2021-02-03
INSTALLATION INSTRUCTIONS
YOU MUST BE ON ROOTED STOCK TO USE THE MOTHER MODULE AND ROM MODULE!
As always it is strongly recommended to make a backup if you have TWRP installed
Install procedure for v11.0 onwards has changed drastically as has the format of the module base itself
From now on the N10 Series has a new install procedure but you will have exactly the same end result!!!!!!.
There is now a "Mother Module" or "MM" which, when flashed in Magisk, places a (Magisk installed) Rom Module zip and a (TWRP flashable) Module Base Convertor zip into their own folder on internal/420.
The next thing to do is to go to TWRP and locate the Module Base Convertor zip and flash it. This will apply all debloat and This will also trigger a marker that will allow the rom module to be flashed.
Once the first zip is flashed, you can then go and install the rom module as normal in Magisk
There is also a rooted stock firmware to start the whole thing off
BEFORE YOU START. DO NOT ATTEMPT TO FLASH THIS OVER A DIFFERENT DEVS ROM - IT WILL CAUSE ISSUES. BACKUP APPS AND DO A FRESH STOCK INSTALL FIRST - that's even if you get past the failsafe
Clean Install Process assuming you are on the matching firmware to the released Rom and rooted
1, Download the "Mother Module" from Downloads (Check in Telegram Group or on XDA).
2, Flash the Mother Module in Magisk - Reboot to TWRP
3, In TWRP, Flash Module Base Convertor located in internal/420 - this will apply all the modifications and debloat to your rom like the old Base did.
4, Reboot and Install Rom Module in Magisk as normal located in internal/420 - all done!!!
Install Process assuming you are coming from earlier 420rom:
1, Download the "Odin Files", "Mother Module" and latest "420rom Release Kernel" from Downloads (Check in Telegram Group or on XDA).
2, Using the "Odin Files" i have provided, Flash Modded BL, Modded AP, CP and HOMECSC in Odin with AUTOREBOOT off
3, Keeping phone plugged in, hold vol down and power to exit download and immediately hold vol up and power to enter TWRP.
4, Flash Multidisabler then Flash the "420rom Release Kernel" image to the boot partition and then Reboot.
5, Flash the Mother Module in Magisk - Reboot to TWRP
6, In TWRP, Flash Module Base Convertor located in internal/420 - this will apply all the modifications and debloat to your rom like the old Base did.
7, Reboot and Install Rom Module in Magisk as normal located in internal/420 - all done!!!
Reserved
Process for getting round SAMSUNG screen issue caused by older TWRPs with future dates (Rollback protection issue)
prerequisites
-TWRP patched tar packaged (patched AP with TWRP from IAN included)
-Stock Patched Recovery
-420 Base Rom
process
-Return to stock by flashing AP/BL/CP&CSC in odin
-Reboot and confirm oem unlocking greyed out, reboot to download, meanwhile unzip the magisk_patched.tar package
-In download mode and with auto reboot off in odin, flash BL, Magisk_patched.tar(with the TWRP from Ian in), CP & HOMECSC.
-When flashing is complete exit download mode and immediatly hold power and vol up and hold until on TWRP slider screen. swipe to allow modifications, format internal storage and flash multidisabler.
-Reboot TWRP wipe data, system, cache and dalvik and flash the base rom for your device...then..... FLASH THE STOCK PATCHED RECOVERY FOR YOUR DEVICE AND THEN FLASH MULTIDISABLER (THIS IS IMPORTANT AS YOU WILL THEN BE ABLE TO INSTALL TWRP VIA THE APP WITHOUT HAVING TO REFORMAT INTERNAL - the process will fail otherwise)
-Reboot straight to stock recovery (reboot from TWRP and hold Vol up and power until in stock recovery) and factory reset then reboot to system.
-You should now boot up as normal, setup your device, in particular have TWRP app and Magisk set up and running.
-Flash the Unpatched TWRP for your device in the TWRP app - reboot TWRP and check the box to kill that annoying swipe to allow modifications and then you are good to install the module !!!
...
...
Last one!!
Nice to see some love for N976B for a change. Appreciate it buddy.
CodeFox said:
Nice to see some love for N976B for a change. Appreciate it buddy.
Click to expand...
Click to collapse
No problem! got to admit its basic at first but i will be constantly evolving this so expect a few quick roms to start with lol!!
How did you fix magisk rootfs on your rom ??
for magisk 19.4 and newer to work?
and don't just causes a bootloop lol
Отправлено с моего iPhone с Tapatalk
pzayx said:
How did you fix magisk rootfs on your rom ??
for magisk 19.4 and newer to work?
and don't just causes a bootloop lol
Отправлено с моего iPhone с Tapatalk
Click to expand...
Click to collapse
its rooted via Geiti's kernel - allowing us to keep using the BLSA TWRP
exocetdj said:
its rooted via Geiti's kernel - allowing us to keep using the BLSA TWRP
Click to expand...
Click to collapse
Is magisk 19.3 or 19.4(or newer) included?
am custom rom maker but in custom (system folder style) after Magisk 19.3 i just get bootloop
From logs @ rootfs is broken
How did you work that out in this ROM?
Or are you using classic 19.3?
I will allso publish my asap rom when it is worked out
pzayx said:
Is magisk 19.3 or 19.4(or newer) included?
am custom rom maker but in custom (system folder style) after Magisk 19.3 i just get bootloop
From logs @ rootfs is broken
How did you work that out in this ROM?
Or are you using classic 19.3?
Click to expand...
Click to collapse
i should probably add that it's magisk 20.3 - so basically it will be whatever magisk version is included in the kernel at time of release
this means obviously that updating magisk manually is not recommended
ill add details to 1st post
also take a look at the 1st post in the kernel thread for an explanation of how this root works
exocetdj said:
i should probably add that it's magisk 20.3 - so basically it will be whatever magisk version is included in the kernel at time of release
this means obviously that updating magisk manually is not recommended
ill add details to 1st post
also take a look at the 1st post in the kernel thread for an explanation of how this root works
Click to expand...
Click to collapse
is it ok if i reuse some stuffs from your rom in my rom so i can make my rom work
I promise i not gonna touch the kernel that you use btw
Please
pzayx said:
is it ok if i reuse some stuffs from your rom in my rom so i can make my rom work
I promise i not gonna touch the kernel that you use btw
Please
Click to expand...
Click to collapse
to be honest mate i'm not sure what you could use, its a very stock rom and whilst it works great, the stuff that makes it work, the kernel namely, arent mine to share i'm afraid bro
as i learn and make my own addidtions going forward, ill be happy to share my own stuff if you provide credit and links to my thread (thats if i ever create anything useful haha!)
exocetdj said:
to be honest mate i'm not sure what you could use, its a very stock rom and whilst it works great, the stuff that makes it work, the kernel namely, arent mine to share i'm afraid bro
as i learn and make my own addidtions going forward, ill be happy to share my own stuff if you provide credit and links to my thread (thats if i ever create anything useful haha!)
Click to expand...
Click to collapse
i need some files for comparison espeically your updater-script symlink please let my use it please? i need to publish my ROM? :fingers-crossed:
Отправлено с моего iPhone с Tapatalk
pzayx said:
i need some files for comparison espeically your updater-script symlink please let my use it please? i need to publish my ROM? :fingers-crossed:
Отправлено с моего iPhone с Tapatalk
Click to expand...
Click to collapse
reckon you can get TWRP working for me? also do you know where to add CSC mods? - its not under csc/other.xml lol
hit me via PM and we're on :good:
exocetdj said:
reckon you can get TWRP working for me? also do you know where to add CSC mods? - its not under csc/other.xml lol
hit me via PM and we're on :good:
Click to expand...
Click to collapse
yes and i will show you how to do High Screen frame rate Mod too if you want to try (@75hz) (@144hz) but it depend what panel the note 10 5G is using and if its same as Note 10+ 5G (note 10 5G works at 75hz but my phone is brick so stopped testing that lol)
pzayx said:
yes and i will show you how to do High Screen frame rate Mod too if you want to try (@75hz) (@144hz) but it depend what panel the note 10 5G is using and if its same as Note 10+ 5G (note 10 5G works at 75hz but my phone is brick so stopped testing that lol)
Click to expand...
Click to collapse
Hi Augustin
For mod suggestions, I suggest iOS emojis, as it's simple too, maybe try to integrate viper like Dr ketan did. I wish all success on your rom sir
Love the name btw one of main reasons I'm downloading it lol
---------- Post added at 12:57 AM ---------- Previous post was at 12:56 AM ----------
pzayx said:
yes and i will show you how to do High Screen frame rate Mod too if you want to try (@75hz) (@144hz) but it depend what panel the note 10 5G is using and if its same as Note 10+ 5G (note 10 5G works at 75hz but my phone is brick so stopped testing that lol)
Click to expand...
Click to collapse
Augustin that you?
lil.kapten said:
For mod suggestions, I suggest iOS emojis, as it's simple too, maybe try to integrate viper like Dr ketan did. I wish all success on your rom sir
Love the name btw one of main reasons I'm downloading it lol
---------- Post added at 12:57 AM ---------- Previous post was at 12:56 AM ----------
Augustin that you?
Click to expand...
Click to collapse
Hehe I love the plant!
Let me know how flashing goes. It takes a lil while but when done, flash multidisabler and THEN reboot
One user reporting error 6 but it flashed fine my end and everything seems in order