Hello Guys
First sorry for my bad english
I have a big problem with my transformer . Someday i have go to install new rom via TWRP. By accident i aborted the instalation in half of process ,and my tablet is stuck on TEAMWIN bootlogo bootloop . Here is the video https://youtu.be/a2LtouyGqZc
When i plugged TF to PC in apx mode, windows (7 64BIT) recognized the tablet as unkown device.I Try to install Universal Naked driver,ASUS original USB driver adbdriver but windows tell me the drivers is'nt for 64 BIT system and i cant install it.
I cant open TWRP .When i try to wipe data from (POWER+VOL DOWN) ii will see this https://youtu.be/y-vntgxKJcQ
In this video after wipe its shown the low bettery but after this is the same bootloop with TEAMWIN logo .
I have tried every opiton i have found but its doesnt work.
This thread is something like last chance for me and my TF so if you have any ideas please help me =)
AFTERO21
eloole said:
Hello Guys
First sorry for my bad english
I have a big problem with my transformer . Someday i have go to install new rom via TWRP. By accident i aborted the instalation in half of process ,and my tablet is stuck on TEAMWIN bootlogo bootloop . Here is the video https://youtu.be/a2LtouyGqZc
When i plugged TF to PC in apx mode, windows (7 64BIT) recognized the tablet as unkown device.I Try to install Universal Naked driver,ASUS original USB driver adbdriver but windows tell me the drivers is'nt for 64 BIT system and i cant install it.
I cant open TWRP .When i try to wipe data from (POWER+VOL DOWN) ii will see this https://youtu.be/y-vntgxKJcQ
In this video after wipe its shown the low bettery but after this is the same bootloop with TEAMWIN logo .
I have tried every opiton i have found but its doesnt work.
This thread is something like last chance for me and my TF so if you have any ideas please help me =)
AFTERO21
Click to expand...
Click to collapse
Hello. Nobody can help me with this problem?
Use a 32bit Windows 7 machine
Related
Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...
Hello! I have a huge problem with my tf700t, Windows 8 won't recognise my device. In device manger it just says: Unknown device.
I'v tried to install the usb drivers manualy but it won't work... I just get "can not find driver software for this device" the error device mangere gives me is "Windows has stopped this device because it has reported problems. (Code 43)" I also tired to install asus sync....
I'm running newest frimware form asus (4.2.1)
Before i installet the 4.2.1 from asus I was running offical cm 10.1 and everything was working. Then i decided to go back stock because i was going to sell the device. I wiped everything including system to unroot the device. After that I downloaded the firmware for asus web page and flashed it. Everything was working except i couldn't connect it to a computer. So i decided to try to flash a older frimware (4.1.1) but I was not able to get into recovery.
I don't know what to do now. I can't install a new rom becouse i can't connect it to my computer or get ot the recovery. I can also not install a new recovery because i don't have root or adb and fastboot won't work.
Any ideas ?
TheGprodz said:
Hello! I have a huge problem with my tf700t, Windows 8 won't recognise my device. In device manger it just says: Unknown device.
I'v tried to install the usb drivers manualy but it won't work... I just get "can not find driver software for this device" the error device mangere gives me is "Windows has stopped this device because it has reported problems. (Code 43)" I also tired to install asus sync....
I'm running newest frimware form asus (4.2.1)
Before i installet the 4.2.1 from asus I was running offical cm 10.1 and everything was working. Then i decided to go back stock because i was going to sell the device. I wiped everything including system to unroot the device. After that I downloaded the firmware for asus web page and flashed it. Everything was working except i couldn't connect it to a computer. So i decided to try to flash a older frimware (4.1.1) but I was not able to get into recovery.
I don't know what to do now. I can't install a new rom becouse i can't connect it to my computer or get ot the recovery. I can also not install a new recovery because i don't have root or adb and fastboot won't work.
Any ideas ?
Click to expand...
Click to collapse
You do have USB debugging enabled??
What happens if you boot with Power and Volume Down, then select the flashing RCK icon with Volume Up? No recovery???
no....
Yes USB debugng is checked, and i'm not able to get to the recovery while pressing Power and Volume Down, then select the RCK icon....
See the picture of what happen when i choose RCK
TheGprodz said:
Yes USB debugng is checked, and i'm not able to get to the recovery while pressing Power and Volume Down, then select the RCK icon....
See the picture of what happen when i choose RCK
Click to expand...
Click to collapse
What you see there IS the stock recovery which overwrote CWM or TWRP when you flashed the stock firmware.
You can use the stock recovery only for one thing: Flashing an official Asus update. The Droid on his back tells you that the stock recovery does not find an update.
So that part is good. You're rom is intact and healthy.
Do you have access to a different computer? Can you try to get the tablet to connect in Windows 7?
I have no experience with Win8 - no idea what the driver problem may be. But that's what it is: You need to find he correct drivers....
I tried with my mothers laptop but that's also running windows 8 but same problem apres, and the other pc I have runs ubuntu :/
TheGprodz said:
I tried with my mothers laptop but that's also running windows 8 but same problem apres, and the other pc I have runs ubuntu :/
Click to expand...
Click to collapse
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1583801
I'm not able to install drivers.... this is the error message translated from Norwegian to English
Can not install unknown device!
can not find driver software for device
If you know the name of the manufacturer of your device, please visit the manufacturer's website and look for driver software in the support section.
This is the error i get when i locate it to the drivers that i downloaded. I haved tried manny different drivers.
bump
I have a TF101 SN60 - SBK1. I was trying today to root it to instal a stupid USB modem app and i bricked it.
Right now it is in recovery mode and i can`t get it out. Tried all the combination of the buttons and still doesn`t work.
I tried to reput the stock rom from Asus and i had success(2 times) but was still in recovery mode and after that i tried once more and it failled.. now i have 7 " !!!!! phone update failled !!!!" and i am very pissed and mad as i do not know what to do no more. I wasted 5 hours today trying to do something to it but i can`t no more. Please help me with some tips or maybe help me put it back to it`s normal state. Thank you.
Which recovery and version do you have installed, and how did you install it?
almost same issue
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
sriv2102 said:
I have cwm 6 something and it wont recognize the sd or paths my laptop wont detect it have every method downloaded nothing what can i do about this?? Bricked for a long time !!
Click to expand...
Click to collapse
Have you tried APX mode?
I would try another PC, or get a new charging cable. It is possible for the USB cable to charge but not work for USB. Happened to me.
Hello,
I somehow managed to do something to my garmin asus m10 so that it wont boot up. It freezes at splash screen. Even windows logo wont show up. Hard reboot wont help. Sd download didnt work, or im doing something wrong. USB mode is recognized by pc but not by WMDC . Any ideas how im supposed to install new firmware ?
Thank you
Hi
i have a htc one s and its stuck on the logo
i know i can acces the recovery mode , boatloader screen , there is no os installed ,(twrp ) also my computer dosent recognize my usb
please this is urgent . ( i need my phone to study
bellding said:
Hi
i have a htc one s and its stuck on the logo
i know i can acces the recovery mode , boatloader screen , there is no os installed ,(twrp ) also my computer dosent recognize my usb
please this is urgent . ( i need my phone to study
Click to expand...
Click to collapse
As long you can access fastboot ans recovery your computer should reconginze the phone
Whats your Windows version?
LS.xD said:
As long you can access fastboot ans recovery your computer should reconginze the phone
Whats your Windows version?
Click to expand...
Click to collapse
Its windows xp and 8 i figured out that because one of the wire out of the 3 on the USB cable was cut, it was unable to recognize . still charged
so i changed the cable .....
What should i do next ?
The twrp was pre installed when i got the phone so me being a noob went to advance wipe and deleted everything trying to get rid of the trwp itself so i would be able to upgrade to new version
Do i have the option to install kitkat rom ?
thanks for reply
bellding said:
Its windows xp and 8 i figured out that because one of the wire out of the 3 on the USB cable was cut, it was unable to recognize . still charged
so i changed the cable .....
What should i do next ?
The twrp was pre installed when i got the phone so me being a noob went to advance wipe and deleted everything trying to get rid of the trwp itself so i would be able to upgrade to new version
Do i have the option to install kitkat rom ?
thanks for reply
Click to expand...
Click to collapse
Just check out THIS
TwistedKat and Pac are quite good roms. Just try some roms to find your needs