Hello,
I somehow managed to do something to my garmin asus m10 so that it wont boot up. It freezes at splash screen. Even windows logo wont show up. Hard reboot wont help. Sd download didnt work, or im doing something wrong. USB mode is recognized by pc but not by WMDC . Any ideas how im supposed to install new firmware ?
Thank you
Related
Hi,
I have tryed to upgrade my rom to a new version (Prophet WM5 AKU3.2 v3231). Followed the stept correctly, however my phone does not boot anymore. It gets stuck in the qtek logo (when it displays the AKU version i´ve got) and the sceen gets all shacky.
An addictional problem is because it is stuck at that point it does not connect to my computer....
What can I do to fix this, any good suggestions
Thank,
Sebastiaan
You should be able to enter bootloader mode by pressing and holding the camera button while you power on your phone. On the bottom left, you should then see "USB" - connect it to the PC and flash it again.
Had to do this yesterday after flashing failed.
Mike
thanks it worked
Sebastiaan
Error [296] Upgrade Only
Hello
I have same Trouble & I Make Bootloder from USB but Always I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Note: I try to Upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m
Now I trying to back to Old Software from I-mate
Also I try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but no Connection....
Please help me I with out Live (Phone)
I know it sounds strange but i used a different USB port and then it did connect. Now that everything is back to normal i can use the old one again.
maybe it works for you as well
I tried doing that, but for some reason my computer doen't recognize the device...pls help!
Hello there,
I tried to flas my MDA and now it stays in bootloader (1.01). Whatever I do: it stays there! (hard/factory reset and what not). Whenever I want to install a new rom by a RUU application, this goes wrong as well!Any help would be much appreciated!
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Aalsen said:
Ive the same problem @ the moment! I tried to do a Rom update and then an error appeared and the installation failed and the recovery afterwards aswell! Now my Universal stucks in the bootloader mode showing USB v. 1.01! How can I get out of this mode! I tried the hard reset, like joenie described but i didnt work!
Click to expand...
Click to collapse
I have the same problem sometimes when I change ROM version, the installer reboots the PDA in USB mode and nothing, the installer display an error and crash. The PDA in not recognized correctly in USB mode.
It is due to your PC (Activesync crashes in silent mode and disable WM device drivers) and not the UNI!!!
Try restart activesync (open it), unplug and replug the UNI and restart installer, the installer will not recognize the actual ROM version but it should be working...
If it fails try to restart the PC or uninstall and reinstall activesync and retry installation...
Be carrefull because in USB boot mode the UNI cannot charge the battery, if the battery is down, you cannot restart installation (And cannot disable boot mode).
I was affraid the first time of USB boot lock (It was the panic, UNI bricked...) but now, I know the problem and I resolve it fastly (restart activesync).
Good luck!!!
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Aalsen said:
Hey thanks for all the advices! i found a really good tutorial how to unbootloader it. But the actuall problem is that windows vista is not having any active sync like Windows XP. I now you can download a windows mobile device manager and I tried the deactivation of the USB port over this one, but it didnt work! Is there any other methode oder way how to get access to the phone to change the status?
Thank You very much!
Aalsen
Click to expand...
Click to collapse
Can you add here the link of the tutorial???
May be try remove usb devices in the device manager of Vista and reboot the PC to redetect the UNI USB drivers.
well lad's and gent's..
I found out what my real problem was
It was a broken USB-cable :|.. wtf!!!
Well anyway. I think you guys are great! all the posts/helps!!
It some else to do???
I try to flash my JASJAR and I brick it........The instaler send my an error and I stuck in bootloader but the instaler window says to cool reset the Universal and the Bootloader was gone and the universal now is death, can't turn on and no Boot...Its bricked and I still crying!!!!.....
Well I have installed a new Rom yesterday on my Q9000...
I whas using my laptop which has Vista on it. Dont know what happend but I got an error msg on my laptop...Tried to reboot my Qtek but it whas hanging on the bootup screen(the 1st screen which shows all Rom/ext rom and Radio version). No matter what I did it refused to bootup...
When plugging in my Qtek on to my laptop, the bootloader screen changed from serial to Usb...
Finally I tried it on the desktop wich still runs on XP and it did the Romupgrade without any pain...
I did several Romupgrades on my Herald all on my Vista laptop without any problems...I don't really understand what or why, maybe because the Qtek is older than the P4350 that it is less compatible with Vista?
Bottom line, I now have a Qtek 9000 which is fast ...
I have a Touch Pro, and i just installed this rom
[FUZE/TP1 230xx builds]Manila 2.5 beta post now WM 6.5 Build 23081 of dfreshest rom
http://www.mobilitydigest.com/forums/showthread.php?t=2002
Rom installed fine, but when the phone reset it self after it was done, the phone restarts then comes up with a black screen and says touch pro in white and just keeps restarting
obviously something is not right....how do i fix this problem or at least be able to install the stock alltel touch pro rom, which i have on my computer
Thanks Alot Chris
ya i guess i didn't read it correctly, i simply thought it was an updated version of TF3d
OK i guess got the phone into boot loader mode, but know when i try to connect to activ sync via usb it wont let me connect....i get the can not recognized error
Thanks for your help !
chris347101 said:
ya i guess i didn't read it correctly, i simply thought it was an updated version of TF3d
OK i guess got the phone into boot loader mode, but know when i try to connect to activ sync via usb it wont let me connect....i get the can not recognized error
Thanks for your help !
Click to expand...
Click to collapse
When you're in the bootloader, does it say USB or Serial at the bottom of the screen? If it says USB, you should be able to flash. ActiveSync won't work in the bootloader.
I got it fixed and back to stock rom last night,
hi, I tried to update my galaxy gt I5500 m and unplugged the usb cable by mistake. my phone boots up normal but the screen only uses half the display wifi dont work nor can i install apps anymore. the phone will go into download mode and recovery which gives me an option to hard reset which i did many times or install update.zip which i downloaded. when it tries to install i get error saying that update.zip isnt signed and it aborts install. i cant get it to connect to the computer it just doesn't recognize the phone any more. the phone will charge from computer but thats all. i tried on win xp and win 7 with no luck.i would be happy just to get my phone back the way it was. i would really be greatful for any help thanks.
Hmm...try to flash your official firmware using ODIN
http://androidwaptoday.blogspot.com/2011/10/odin-multi-downloader-flasher-program.html
get your official firmware from http://www.samfirmware.com
Hello Guys
First sorry for my bad english
I have a big problem with my transformer . Someday i have go to install new rom via TWRP. By accident i aborted the instalation in half of process ,and my tablet is stuck on TEAMWIN bootlogo bootloop . Here is the video https://youtu.be/a2LtouyGqZc
When i plugged TF to PC in apx mode, windows (7 64BIT) recognized the tablet as unkown device.I Try to install Universal Naked driver,ASUS original USB driver adbdriver but windows tell me the drivers is'nt for 64 BIT system and i cant install it.
I cant open TWRP .When i try to wipe data from (POWER+VOL DOWN) ii will see this https://youtu.be/y-vntgxKJcQ
In this video after wipe its shown the low bettery but after this is the same bootloop with TEAMWIN logo .
I have tried every opiton i have found but its doesnt work.
This thread is something like last chance for me and my TF so if you have any ideas please help me =)
AFTERO21
eloole said:
Hello Guys
First sorry for my bad english
I have a big problem with my transformer . Someday i have go to install new rom via TWRP. By accident i aborted the instalation in half of process ,and my tablet is stuck on TEAMWIN bootlogo bootloop . Here is the video https://youtu.be/a2LtouyGqZc
When i plugged TF to PC in apx mode, windows (7 64BIT) recognized the tablet as unkown device.I Try to install Universal Naked driver,ASUS original USB driver adbdriver but windows tell me the drivers is'nt for 64 BIT system and i cant install it.
I cant open TWRP .When i try to wipe data from (POWER+VOL DOWN) ii will see this https://youtu.be/y-vntgxKJcQ
In this video after wipe its shown the low bettery but after this is the same bootloop with TEAMWIN logo .
I have tried every opiton i have found but its doesnt work.
This thread is something like last chance for me and my TF so if you have any ideas please help me =)
AFTERO21
Click to expand...
Click to collapse
Hello. Nobody can help me with this problem?
Use a 32bit Windows 7 machine