Related
SM-G900P Downgrade Lollipop
I want to restore my phone to it's initial release.
I now have...
Android version: 5.0 (Lollipop)
Software version: G900PVPU3B0F6
I want...
Android version: 4.4.2 (Kit-Kat)
Software version: G900PVPU1ANCB
I've downloaded G900PVPU1ANCB from SamMobile.com
File name: G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5
I use ODIN to install, but there's an error...
Odin version: 3.09
Message log from ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Message log from ANDROID:
ODIN MODE
PRODUCT NAME: SM-G900P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX WARRANTY VOID: 0X1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, R1, A3, P1
SECURE DOWNLOAD: ENABLE
UDC START
SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1
Any ideas as to why I can't downgrade? Thanks.
It's not possible to downgrade due to security changes made in its system.
Sent from my SM-G860P using Tapatalk
SeanRinVA said:
It's not possible to downgrade due to security changes made in its system.
Sent from my SM-G860P using Tapatalk
Click to expand...
Click to collapse
Can I still use custom firmware as long as it runs off Lollipop?
Proxxemic said:
Can I still use custom firmware as long as it runs off Lollipop?
Click to expand...
Click to collapse
Rooted?
Custom Recovery?
Probably. You'll need to check the other threads for your specific model. As you can see, I'm running the Sprint S5 Sport or SM-G860P.
Sent from my SM-G860P using Tapatalk
SeanRinVA said:
Rooted?
Custom Recovery?
Probably. You'll need to check the other threads for your specific model. As you can see, I'm running the Sprint S5 Sport or SM-G860P.
Sent from my SM-G860P using Tapatalk
Click to expand...
Click to collapse
My phone is rooted as of now, but I'm not sure what custom recovery is... yet. I'll do my research on that. Thanks.
You can't downgrade from this firmware.
Hey,
I'm having the same problem..
Does anyone have a nandroid backup for 4.4 or 4.2? I think that should work
Thanks in advance,
mprodani2003 said:
Hey,
I'm having the same problem..
Does anyone have a nandroid backup for 4.4 or 4.2? I think that should work
Thanks in advance,
Click to expand...
Click to collapse
Noone reads.
You cannot run or flash an older rom or firmware if your phone is running firmware newer than OA6.
tdunham said:
Noone reads.
You cannot run or flash an older rom or firmware if your phone is running firmware newer than OA6.
Click to expand...
Click to collapse
Right? Lol. O further elaborate tho, the bootloader prevents older versions from being flashed or from running. That's just how it is. I can't even remember how many downgrade threads I have read -.-
Sent from my SM-G900P using Tapatalk
tdunham said:
You can't downgrade from this firmware.
Click to expand...
Click to collapse
Hi, If I'm running OG1 and flash a custom 5.0 rom, can I odin back to OG1 later?
Thanks!
im on oa6 and ran nk4 roms by just installing the nk4 kernel.
21071992 said:
Hi, If I'm running OG1 and flash a custom 5.0 rom, can I odin back to OG1 later?
Thanks!
Click to expand...
Click to collapse
Yes, you can go back to OG1 using Samsung Kies 3.
---------- Post added at 04:03 PM ---------- Previous post was at 03:52 PM ----------
I was able to install Clockworkmod recovery on Galaxy S5 SM-G900P running lollipop OG1 firmware using this method and then flash a custom 4.4.4 and 4.4.2 roms with recovery mode and flash NE5(for 4.4.2) and NK4(4.4.4) kernels with odin and also flash NE5 modem in order to install SSU.apk (Samsung Sprint Unlock) which unlocked the phone but i did not get a signal with T-Mobile sim card and with more research i found out that this unlock is not made for in USA but for international use.
anatoliy0813 said:
Yes, you can go back to OG1 using Samsung Kies 3.
---------- Post added at 04:03 PM ---------- Previous post was at 03:52 PM ----------
I was able to install Clockworkmod recovery on Galaxy S5 SM-G900P running lollipop OG1 firmware using this method and then flash a custom 4.4.4 and 4.4.2 roms with recovery mode and flash NE5(for 4.4.2) and NK4(4.4.4) kernels with odin and also flash NE5 modem in order to install SSU.apk (Samsung Sprint Unlock) which unlocked the phone but i did not get a signal with T-Mobile sim card and with more research i found out that this unlock is not made for in USA but for international use.
Click to expand...
Click to collapse
You mean you can flash a custom rom based on KK from OG1? I have only tried flashing by odin, havent tried a cusrom rom yet. I will try it later, thanks very much!
21071992 said:
You mean you can flash a custom rom based on KK from OG1? I have only tried flashing by odin, havent tried a cusrom rom yet. I will try it later, thanks very much!
Click to expand...
Click to collapse
Yes you can if you install clockworkmod recovery but you can't flash roms (stock or costom) with odin from download mode anymore if you have OG1 and higher i think because i tried flashing stock roms with odin even when i was on costom rom, it would always say fail.
anatoliy0813 said:
Yes you can if you install clockworkmod recovery but you can't flash roms (stock or costom) with odin from download mode anymore if you have OG1 and higher i think because i tried flashing stock roms with odin even when i was on costom rom, it would always say fail.
Click to expand...
Click to collapse
Which rom did you try to flash with odin? OG1 or earlier version?
So if I flash a custom 4.4 rom through CWM, can I flash back to OG1 by odin later? Sorry because I ask too much, but Sprint 5.0 is too confusing @@
21071992 said:
Which rom did you try to flash with odin? OG1 or earlier version?
So if I flash a custom 4.4 rom through CWM, can I flash back to OG1 by odin later? Sorry because I ask too much, but Sprint 5.0 is too confusing @@
Click to expand...
Click to collapse
I tried flashing 4.4.2 and 4.4.4 stock roms and a few other costom roms with odin, all of them failed. I haven't tried 5.0 with odin though. You could use Samsung Kies 3 to go back to latest android version of the phone but the phone has to be turned on since i don't think samsung kies will detect the phone if it is recovery mode or download mode.
Is that possible?
Whenever I restore from Kies I no longer have wifi calling. Does anyone else have this issue?
so there's no way to downgrade from running fusion ROM 5.1.1 to OA6?
i update my phone from 4.4.2 to 5 ok4 latest fw
and i lost my network
any solution?
can i downgrade to 4.4.2???????????
Here's my problem which I was trying to fix for a week now. I got a Galaxy S6 (G920FXXU3COI9 - international) which was working fine but I decided to make some improvements (tmobile wifi calling, etc). So, I decided to root the phone with new kernel (S6-UniBase_BOG8_v2) and then put a new ROM in (Rapture 2.1, my build became G920TUV2COF8). And everything works fine but when I make phone calls on tmobile tower I'm getting nasty while noise (but wifi calling, viber, etc, work just fine. 4G network works fine too but it looks like phone reception is kinda low).
So, I decided to try another ROM or change modem/BL files but Odin 3.10.7 (and 1.8) cannot pass NAND write stage. On another hand, I was able to change kernels. I also tried to reinstall samsung drivers and use another USB port - same result. Trying to flash with new BL/modem throws error on the phone "SW rev check fail device: 3 binary: 2" which doesn't show up when I try to flash ROM.
Any ideas on how to fix noise or change ROM to international or T-Mobile one? I suspect that I'm using incompatible files somewhere but I tried 4 different ROMs with the same results.
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Failed in sboot.bin means your flashing an older bootloader.
Sorry to say but you cant downgrade your bootloader.
Your phone has COI9 based from what you said. Where did you get the modem/bootloader file? Im suspecting it is not on COI9 bootloader.
Just flash a latest stock firmware from sam firmware to get the latest bootloader.
batuzai04123 said:
Failed in sboot.bin means your flashing an older bootloader.
Sorry to say but you cant downgrade your bootloader.
Your phone has COI9 based from what you said. Where did you get the modem/bootloader file? Im suspecting it is not on COI9 bootloader.
Just flash a latest stock firmware from sam firmware to get the latest bootloader.
Click to expand...
Click to collapse
thanks. Thants what I thought the problem is. Can you send me the link for the latest bootloader/modem I can flash on my phone.
Do you think I can use T-mobile ROM with my international edition phone?
Dude, Im just using my phone right now, Just search your exact phone model in sammobile and download the whole firmware.
SamMobile provides original/verified/stock full firmwarw for your device. They wouldnt upload a single bootloader or modem img or bin files.
Maybe someone can share their extracted sboot.bin based from COI9. Just be sure to convert it to flashable odin file before flashing or else youll be facing some problems again. Or better, a ready made flashable odin bootloader based from COI9.
batuzai04123 said:
Dude, Im just using my phone right now, Just search your exact phone model in sammobile and download the whole firmware.
SamMobile provides original/verified/stock full firmwarw for your device. They wouldnt upload a single bootloader or modem img or bin files.
Maybe someone can share their extracted sboot.bin based from COI9. Just be sure to convert it to flashable odin file before flashing or else youll be facing some problems again. Or better, a ready made flashable odin bootloader based from COI9.
Click to expand...
Click to collapse
Many thanks, man.
I found the firmware on sams mobile but they have 5 different ones for PDA: G920FXXU3COJ1; I'm confused with CSC code. Thats why I was asking for a direct link.
Excuse my ignorance but by "convert it to flashable odin file" you mean .img to md5 conversion or something else?
And, one more question, I guess it is not a good idea to change ROM from 920F to 920T, or I should try few more 920T before giving up?
Hmm why would you want to flash a TMo version??? If I were you, just stick with your current ROM.
There is no direct link for sammobile, just forget what I've said with COI9 build number, just download the latest firmware for your region. If you find any file just pick the latest date and youll do good. It contains the latest bootloader for your phone.
Md5 thing is just for the checksum for odin. It is added for verification and its the most praticed and suggested way of creating ODIN flashable files.. But IMG will do good.
batuzai04123 said:
Hmm why would you want to flash a TMo version??? If I were you, just stick with your current ROM.
There is no direct link for sammobile, just forget what I've said with COI9 build number, just download the latest firmware for your region. If you find any file just pick the latest date and youll do good. It contains the latest bootloader for your phone.
Md5 thing is just for the checksum for odin. It is added for verification and its the most praticed and suggested way of creating ODIN flashable files.. But IMG will do good.
Click to expand...
Click to collapse
ok, finally got it fix, sorta.
Rapture 2.1 ROM gave me loud white noise during calls but the rest was working fine. The post says to flash the phone with BL and Modem files but Odin failed (I assume since I have newer BL already). So, I went back with latest G920FXX stock ROM and the phone works fine.
As title says, can i downgrade to 5.1.1 from 6.0.1? My phone is G920F. Will there be issues with bootloader? On sammobile forum, they said to me that downgrade is not possible because of bootloader.
Yes you can downgrade without any issues
Sent from my SM-G925F using Tapatalk
yes you can , just you must do a factory reset
can you tell me how to enter recovery mode from odin download?
acamiki said:
can you tell me how to enter recovery mode from odin download?
Click to expand...
Click to collapse
first download the 5.1.1 stock rom
second run odin
third enter download mode using three buttons
forth click start
fifth when finished enter recovery using volume up home and power button
last do a wipe system and cache and reboot
yes, i know that, in odin i must ucheck autoreboot, but when finished installing the firmware, it stays in download mode, what is combitation of buttons to enter recovery mode directly from download mode
I'm currently using XtreStoLite Deo Mod v.2.4 - XXU3COI9 with engineering bootloader, root and knox 0x0. Can I clean install some stock MM ROM without tripping the flag and can I go back from MM to the mentioned ROM (5.1.1) with engineering bootloader without tripping the flag or damaging the phone in any way? Is it possible did any1 tried it? I know that if you update your bootloader to COI9 or higher version you won't be able to use engineering bootloader anymore, which means no root with knox 0x0 on 5.1.1.
Done, I put Lp following the instructions above, all ok.
After the flash of fw the phone goes into bootloop, just go into recovery and make various wipe.
For me the LP look is better and I have dozens of settings in more than MM.
Thanks.
acamiki said:
As title says, can i downgrade to 5.1.1 from 6.0.1? My phone is G920F. Will there be issues with bootloader? On sammobile forum, they said to me that downgrade is not possible because of bootloader.
Click to expand...
Click to collapse
why do you want to downgrade? maybe it's easier to try and solve your issue with MM
musmax said:
Done, I put Lp following the instructions above, all ok.
After the flash of fw the phone goes into bootloop, just go into recovery and make various wipe.
For me the LP look is better and I have dozens of settings in more than MM.
Thanks.
Click to expand...
Click to collapse
So you were on stock android 6.0.1 with marshmallow bootloader installed on Galaxy S6 and you downgraded to lollipop 5.1.1 and flashed engineering bootloader again and Knox is 0x0? I'm asking because I just want to make sure. I want to install some stock MM but I don't know yet if I will be able to live without root and want to know if I can go back to my previous ROM and bootloader, without tripping the flag.
SM-G920F & Tapatalk
There's already a few threads on this
http://forum.xda-developers.com/galaxy-s6/help/help-downgrading-g920f-6-0-1-to-5-1-1-t3332530
http://forum.xda-developers.com/galaxy-s6/help/downgrade-6-0-1-to-5-1-1-g925f-t3330845
http://forum.xda-developers.com/galaxy-s6/help/help-downgrade-please-t3330551
It's always best to search before posting
All OK and KNOX 0x0.
@musmax I also want to downgrade
You have success- from which to which roms exactly (can you give me names of both firmwares)?
thanks
ivanox1972 said:
@musmax I also want to downgrade
You have success- from which to which roms exactly (can you give me names of both firmwares)?
thanks
Click to expand...
Click to collapse
I'm Italian (wind) from ... DPBG to ... COI9, all ok.
I was on mm6.0.1 , I downloaded the very first 5.1.1 fw from sammobile but everytime I try to flash ,odin says 'Fail'
can anyone please help me with this?
+ 1.
I was on MM update and downgrade to LP because I liked the old stock clock widget.
Mainly because of my old themes work better with LP update.
MM clock widget is crap doesn't change shape or size with your themes. Plus the MM stock clock widget shadow is gone.
No special effects on lock screen either like bobble effects with MM update.
I hope they fix old themes to work with android 7 and bring back the old clock widget weather.
Who else likes the old LP update? I used December android 5.1.1
(XEU). Europe firmware
What version of MM were coming?
Thank you.
I tried but it does not work from G920FXXS4DPG2, Odin said FAIL.
hi, i upgraded my s6 to one of the latest builds of marshmallow, now i want to downgrade to lollipop.
when i flash with odin, it gets every time an error (with hidden). If i flash the lollipop bootloader, it stops the flash at half, and it fails...
so it's impossible for me to downgrade! i tried installing xtrestolite (lollipop version) but it stucks at "Samsung Galaxy S6", so it is in a bootloop....
how to solve?
I'm trying to solve my main problem and decided to downgrade from 6.0.1 (G920FXXU4DPH7_G920FTEN4DPH1_G920FXXU4DPFY_HOME.tar.md5) to 5.1.1 (G920FXXU3QOLH_G920FTEN3QOL2_G920FXXU3QOKD_HOME.tar.md5) unfortunately it fails:
<ID:0/006> Removed!!
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can be the problem?
So ummmm... Slight noob here. I searched this thread (http://forum.xda-developers.com/gal...e-deodexed-mod-edition-1-0-t3094423/page1630) to see if it works on G920p and found comments saying it does. Being overjoyed I flashed it. Ran into touchscreen problems so I flashed the correct kernel. It works pretty good except I don't have root for whatever reason. I tried cf auto root... No go. So I just wanted to back to stock and give up finding Roms for this device BUT Odin keeps giving me a fail message like this
Added!!
Odin engine v(ID:3.1005)
File analysis..
SetupConnection..
Initialization..
Get PIT for mapping..
Firmware update start..
SingleDownload.
shoot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed
Can anybody help me. I never had this problem it usually works. Is it because I flashed firmware that wasn't based on G920p???
Troundtree97 said:
So ummmm... Slight noob here. I searched this thread (http://forum.xda-developers.com/gal...e-deodexed-mod-edition-1-0-t3094423/page1630) to see if it works on G920p and found comments saying it does. Being overjoyed I flashed it. Ran into touchscreen problems so I flashed the correct kernel. It works pretty good except I don't have root for whatever reason. I tried cf auto root... No go. So I just wanted to back to stock and give up finding Roms for this device BUT Odin keeps giving me a fail message like this
Added!!
Odin engine v(ID:3.1005)
File analysis..
SetupConnection..
Initialization..
Get PIT for mapping..
Firmware update start..
SingleDownload.
shoot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed
Can anybody help me. I never had this problem it usually works. Is it because I flashed firmware that wasn't based on G920p???
Click to expand...
Click to collapse
You can encounter that problem when PIT or modem or bootloader are incorect for a rom version you're trying to flash with Odin. Did you manually flashed some modem/bootloader when you were flashing that custom rom? And which version of stock rom are you trying to flash with Odin?
mildj84ns said:
You can encounter that problem when PIT or modem or bootloader are incorect for a rom version you're trying to flash with Odin. Did you manually flashed some modem/bootloader when you were flashing that custom rom? And which version of stock rom are you trying to flash with Odin?
Click to expand...
Click to collapse
No i didn't install anything besides the ROM. I tried installing all the MM files for the s6 found here http://updato.com/firmware-archive-select-model?r=SPR&v=Marshmallow(Android+6.0.1)&q=SM-G920P. It used to work before i flashed this ROM. Now i get a "fail" message every time.
Have you tried the firmware that officially came with yours?
I had once the same problem with a friends G925F which I tried the latest version of MM on and had the same issue. When installing back the firmware of our country it succeeded.
And you can always try Smart Switch the Emergency Recovery function.
RDDraco said:
Have you tried the firmware that officially came with yours?
I had once the same problem with a friends G925F which I tried the latest version of MM on and had the same issue. When installing back the firmware of our country it succeeded.
And you can always try Smart Switch the Emergency Recovery function.
Click to expand...
Click to collapse
If you mean "out of the box" then no. I did try to flash the official MM for my Sprint version. No luck
So ummmm... Slight noob here. I searched this thread (http://forum.xda-developers.com/gal...e-deodexed-mod-edition-1-0-t3094423/page1630) to see if it works on G920p and found comments saying it does. Being overjoyed I flashed it. Ran into touchscreen problems so I flashed the correct kernel. It works pretty good except I don't have root for whatever reason. I tried cf auto root... No go. So I just wanted to back to stock and give up finding Roms for this device BUT Odin keeps giving me a fail message like this
Added!!
Odin engine v(ID:3.1005)
File analysis..
SetupConnection..
Initialization..
Get PIT for mapping..
Firmware update start..
SingleDownload.
shoot.bin
NAND Write Start!!
FAIL!
Complete(Write) operation failed
Can anybody help me. I never had this problem it usually works. Is it because I flashed firmware that wasn't based on G920p???
You can't flash older firmware than the installed firmware.
Hello, i have the problen in odin... cm.bin fail, any idea?
Alex93917 said:
You can't flash older firmware than the installed firmware.
Click to expand...
Click to collapse
im not tho. im flashing the latest firmware