ElementalX after despair kernel
Hi,
I've installed Android M. After, I've installed despair kernel to root my nexus.
I would like to install elementalX, but when i lauch the install, there is a windows qhich says i must'nt install elementalX if I have already a custom kernel....
How to do to install elementalX on my nexus ?
Thanks.
Reinstall the ROM and then flash ElementalX
flar2 said:
Reinstall the ROM and then flash ElementalX
Click to expand...
Click to collapse
if I reintall the rom, I'll loose the root ? Because I want root AND android M AND elementalX.....
Wolfen38 said:
if I reintall the rom, I'll loose the root ? Because I want root AND android M AND elementalX.....
Click to expand...
Click to collapse
Flash your ROM > ElementalX > SuperSU 2.49. Voilà.
It's ok for android M + elementalX + root.
But i don't understand where I have to go to parameter elementalX.... ? What is aroma ? i believed it was installed in the same time than the kernel ?
is it possible to have explains how to parameter elementalX ?
thanks.
Wolfen38 said:
It's ok for android M + elementalX + root.
But i don't understand where I have to go to parameter elementalX.... ? What is aroma ? i believed it was installed in the same time than the kernel ?
is it possible to have explains how to parameter elementalX ?
thanks.
Click to expand...
Click to collapse
AROMA is just an installer to let the user select which options he wants to enable/disable before flashing the kernel, ROM, GApps...
I suggest you to leave the stock settings for the moment or to use this version: ElementalX-N5-5.03-express
Ok, if I understand, if one day i want to test some features, I have to re install the kernel ? We can change settings only during install ?
Wolfen38 said:
Ok, if I understand, if one day i want to test some features, I have to re install the kernel ? We can change settings only during install ?
Click to expand...
Click to collapse
Nope. The AROMA Installer is a tool to define settings at every boot. You can of course change them in the config file (/etc/elementalx.conf) or through a kernel manager app like Ex Kernel Manager, Kernel Adiutor,...
Read post 2 of flar2's thread for further details: http://forum.xda-developers.com/google-nexus-5/orig-development/kernel-elementalx-n5-0-44-t2519607
Thanks
Related
Hi guys
I need a Kernel like "GRIMLOCK_KERNEL_CM_V0.8", my device use CROMBI-KK, or other recomend me, for OC graphic chip! pls!!
i try to find link for downloading but no results
thanks
-excuse my English
caelum prime said:
Hi guys
I need a Kernel like "GRIMLOCK_KERNEL_CM_V0.8", my device use CROMBI-KK, or other recomend me, for OC graphic chip! pls!!
i try to find link for downloading but no results
thanks
-excuse my English
Click to expand...
Click to collapse
You have this: http://forum.xda-developers.com/showthread.php?t=2686235 ROM, right?
The Kernels for it are included in the installer, when you first flash the zip. You can just reflash it and select a kernel this time.
cmendonc2 said:
You have this: http://forum.xda-developers.com/showthread.php?t=2686235 ROM, right?
The Kernels for it are included in the installer, when you first flash the zip. You can just reflash it and select a kernel this time.
Click to expand...
Click to collapse
Thanks!
The problem: i flash with the grimkernel included, but, after boot screen appear " Encryption Unsuccessful" with the option factory reset to can "work"
Whats wrong?
now i open other post, with the problem, thank!:laugh:
Hello friends.
Someone could tell me where I can get the 4.2.2 kernel I should use first to start upgrading to a higher version. The phatom already in its version r15 and I think it would no longer be appropriate.
I appreciate your help and forgive my bad English.
Stronger1101 said:
Hello friends.
Someone could tell me where I can get the 4.2.2 kernel I should use first to start upgrading to a higher version. The phatom already in its version r15 and I think it would no longer be appropriate.
I appreciate your help and forgive my bad English.
Click to expand...
Click to collapse
What do you mean by 'upgrading to a higher version'??
the latest version for jb is v7 and all those after that are for kitkat only.
Also you can flash a kitkat kernel and flash a kitkat rom WITHOUT installing JB first. It means that you can install r15 along with any kitkat rom without going through the installation of v7.
Hope this helps.
Hit thanks if it does.
I thought you ought to install the modules that make referncia enconctre a tutorial on explaining how to flash kernels
Stronger1101 said:
I thought you ought to install the modules that make referncia enconctre a tutorial on explaining how to flash kernels
Click to expand...
Click to collapse
I don't understand what you just said.
Could you use simple English?
sorry
abhi007.john said:
I don't understand what you just said.
Could you use simple English?
Click to expand...
Click to collapse
Okay, this was my neglect sorry.
In a tutorial says I should install some modules and then flash the kernel. You know something?
Stronger1101 said:
Okay, this was my neglect sorry.
In a tutorial says I should install some modules and then flash the kernel. You know something?
Click to expand...
Click to collapse
Installing modules flashing the kernel zip using recovery.
Follow these steps
Extract boot.img from the zip file.
Flash it using fastboot (I assume you know how to flash). After that your kernel will be installed. Then power on the phone and let it boot completely. Then copy the kernel zip that you downloaded and from which to you extracted boot.img to your internal storage.
Reboot your device and enter recovery. Flash the kernel zip (This step is called installing modules)
Done. Restart
Hope it helps
Hit thanks if it does
http://forum.xda-developers.com/htc-butterfly-s/development/s-rom-superrom-kk4-4-4-sense6-eye-3-34-t2968365
Someone tried this rom on our butterfly yet?
tried myself..two times still not booting eventhough no error during flashing.
keep showing the first bootscreen htc...
Tried it too. Flashed over insertcoin, not booting. Same situation as you.
xunus said:
Tried it too. Flashed over insertcoin, not booting. Same situation as you.
Click to expand...
Click to collapse
really? hmm..planning to flash latest stock for cid 61..and flash superrom after that.
How did it go for you? I'm not planning to update to a 4.4.4 because I will miss the awesome kernel by Kairi.
try this !
creezalird said:
really? hmm..planning to flash latest stock for cid 61..and flash superrom after that.
Click to expand...
Click to collapse
Did you edit the build.prop file ?
---------- Post added at 12:35 PM ---------- Previous post was at 12:34 PM ----------
try by editing build.prop
xunus said:
How did it go for you? I'm not planning to update to a 4.4.4 because I will miss the awesome kernel by Kairi.
Click to expand...
Click to collapse
can u tell me how did u run Kairi's 4.4.2 with InsertCoin 3.0.6, i dont see, the any performance tweaks section, not even I/O schedulers?
waleedezz said:
can u tell me how did u run Kairi's 4.4.2 with InsertCoin 3.0.6, i dont see, the any performance tweaks section, not even I/O schedulers?
Click to expand...
Click to collapse
Use Synapse to do the tweaks
xunus said:
Use Synapse to do the tweaks
Click to expand...
Click to collapse
i tried to install it but synapse shows, no uci support detected?!
1- did you get Synapse from play store right or u installed a specially tweaked build from another source for this kairi's kernel?
2- anyways i noticed there are 2 files in the Kairi's kernel page, one is is the actual kernel build, the other is a reset kernel file to install before the kernel, did u install both files from the same page or u installed, only the kernel build?
3- did u install the kernel files first or insertcoin rom first then the kernel?
waleedezz said:
i tried to install it but synapse shows, no uci support detected?!
1- did you get Synapse from play store right or u installed a specially tweaked build from another source for this kairi's kernel?
2- anyways i noticed there are 2 files in the Kairi's kernel page, one is is the actual kernel build, the other is a reset kernel file to install before the kernel, did u install both files from the same page or u installed, only the kernel build?
3- did u install the kernel files first or insertcoin rom first then the kernel?
Click to expand...
Click to collapse
1) Synapse from play store
2) Flash reset kernel followed by Kairi's kernel.
3) Insertcoin ROM -> Reset kernel -> KairI's kernel
xunus said:
1) Synapse from play store
2) Flash reset kernel followed by Kairi's kernel.
3) Insertcoin ROM -> Reset kernel -> KairI's kernel
Click to expand...
Click to collapse
oh ok,
1- do i have to flash busybox the superuser for rooting after i flash insertcoin n before i install reset build & kairi's kernel? in order for this to work or not needed?
2- what version of kairi's kernel are u running. i mean in case the latest version doesnt work.
---------- Post added at 03:32 AM ---------- Previous post was at 02:45 AM ----------
waleedezz said:
oh ok,
1- do i have to flash busybox the superuser for rooting after i flash insertcoin n before i install reset build & kairi's kernel? in order for this to work or not needed?
2- what version of kairi's kernel are u running. i mean in case the latest version doesnt work.
Click to expand...
Click to collapse
i did as u said in the same order insertcoin > reset > kairi's kernel (last build), but this gave me bootloop, maybe the last build is not working, i also experimented with installing the kernel first then insertcoin rom, but Synapse didnt work even when i was rooted, i tried to flash insertcoin then kairi's kernel without the reset, the rom booted successfully this time no bootloops, but synapse showed "No UCI support detected" after accessing root permission, guess it means something went wrong, either reset was causing the issue or the latest kairi's kernal build is not working?
i tried to get the same build u r using, which is (27-5-2014) the link show to versions under it, on is called lockless edition the other is called ordinary edition, i tried lockless edition n its working fine with reset, insertcoin rom and even synapse, i tweaked it for better performance
waleedezz said:
oh ok,
1- do i have to flash busybox the superuser for rooting after i flash insertcoin n before i install reset build & kairi's kernel? in order for this to work or not needed?
2- what version of kairi's kernel are u running. i mean in case the latest version doesnt work.
---------- Post added at 03:32 AM ---------- Previous post was at 02:45 AM ----------
i did as u said in the same order insertcoin > reset > kairi's kernel (last build), but this gave me bootloop, maybe the last build is not working, i also experimented with installing the kernel first then insertcoin rom, but Synapse didnt work even when i was rooted, i tried to flash insertcoin then kairi's kernel without the reset, the rom booted successfully this time no bootloops, but synapse showed "No UCI support detected" after accessing root permission, guess it means something went wrong, either reset was causing the issue or the latest kairi's kernal build is not working?
i tried to get the same build u r using, which is (27-5-2014) the link show to versions under it, on is called lockless edition the other is called ordinary edition, i tried lockless edition n its working fine with reset, insertcoin rom and even synapse, i tweaked it for better performance
Click to expand...
Click to collapse
Yep thats right. Hope you enjoy it!
xunus said:
Yep thats right. Hope you enjoy it!
Click to expand...
Click to collapse
i noticed this kairi's kernel has an issue, the performance tweak app synapse is troublesome, it resets my tweaks for no reason after restarts, the I/O schedulers, memory buffer size, not only that but it default my CPU clock to 1 ghz only which is far lower than the stock 1.5
waleedezz said:
i noticed this kairi's kernel has an issue, the performance tweak app synapse is troublesome, it resets my tweaks for no reason after restarts, the I/O schedulers, memory buffer size, not only that but it default my CPU clock to 1 ghz only which is far lower than the stock 1.5
Click to expand...
Click to collapse
For every bootup, it requires you to stay for at least 2mins before any reboot. If not it will resets your tweaks. Then you just have to go to synapse app and press the "X" option to return back to your tweaked settings.
Hello mates!
I am currently editing ROM for HTC Desire 300. Now, there is already SuperSU,superuser app, but I am not very satisfacted with it. I am planing to change it to Superuser (Made by ChainsDD) and I need to know following:
Are those 2 apps using same binary ?
Can I simply replace SuperSU apk in system/apps/ with ChainsDD superuser app, or I must something additionally ?
Thanks !
I think they are different binaries
jukson said:
Hello mates!
I am currently editing ROM for HTC Desire 300. Now, there is already SuperSU,superuser app, but I am not very satisfacted with it. I am planing to change it to Superuser (Made by ChainsDD) and I need to know following:
Are those 2 apps using same binary ?
Can I simply replace SuperSU apk in system/apps/ with ChainsDD superuser app, or I must something additionally ?
Thanks !
Click to expand...
Click to collapse
Install the new superuser will prompt you to delete the old one. BTW "SuperSU" is the very best superuser access tool ever made in my opinion
Why not just uninstall the superuser first and then Flash the laster SuperSU
pushkardua said:
Why not just uninstall the superuser first and then Flash the laster SuperSU
Click to expand...
Click to collapse
Because my phone is s-on. And I cant do that. I have already tried it + as I said "I am editing ROM"
jukson said:
Because my phone is s-on. And I cant do that. I have already tried it + as I said "I am editing ROM"
Click to expand...
Click to collapse
Man, even with S-ON you can flash ANY superuser app via custom recovery. May I ask why u prefer another app and NOT SuperSU???
LS.xD said:
Man, even with S-ON you can flash ANY superuser app via custom recovery. May I ask why u prefer another app and NOT SuperSU???
Click to expand...
Click to collapse
I don't know. I always used Superuser (app) on my older phones and I am somehow used to it. I tried to flash it but then dead android appears (if you know what I mean) and it says instalation failed. I downloaded Superuser.zip from their official website
jukson said:
I don't know. I always used Superuser (app) on my older phones and I am somehow used to it. I tried to flash it but then dead android appears (if you know what I mean) and it says instalation failed. I downloaded Superuser.zip from their official website
Click to expand...
Click to collapse
Which custom recovery are you using?
LS.xD said:
Which custom recovery are you using?
Click to expand...
Click to collapse
CWM Advanced Edition 5
CWM Base version: v6.0.3.7
jukson said:
CWM Advanced Edition 5
CWM Base version: v6.0.3.7
Click to expand...
Click to collapse
Can you flash the SuperSU zip? Just for figuring out whats the problem with the recovery...
If your recovery causes the error, you can choose another one HERE
LS.xD said:
Can you flash the SuperSU zip? Just for figuring out whats the problem with the recovery...
If your recovery causes the error, you can choose another one HERE
Click to expand...
Click to collapse
I will try it now. Thanks for patience
I tired it and it worked. It flashed it without any problems.
jukson said:
I will try it now. Thanks for patience
I tired it and it worked. It flashed it without any problems.
Click to expand...
Click to collapse
Means its not caused by S-ON. You just need a flashable zip of your superuser tool. But installing via play store is th easier choice i think.
How to install xposed on my Sparkle V sprout4 running cm13 6.0.1??
Coojlazz said:
How to install xposed on my Sparkle V sprout4 running cm13 6.0.1??
Click to expand...
Click to collapse
Just DL arm_v86_zip from here, then reboot recovery, flash the zip > Reboot phone > once the phones boots install xposed installer apk > voila! You're done!
Then DL modules, activate & enjoy!
Xposed arm_v86_zip > http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
Xposed installer > http://www.apkmirror.com/wp-content...er_3.1.1-39_minAPI15(nodpi)_apkmirror.com.apk
Goodluck!
sachin n said:
Just DL arm_v86_zip from here, then reboot recovery, flash the zip > Reboot phone > once the phones boots install xposed installer apk > voila! You're done!
Then DL modules, activate & enjoy!
Xposed arm_v86_zip > http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
Xposed installer > http://www.apkmirror.com/wp-content...er_3.1.1-39_minAPI15(nodpi)_apkmirror.com.apk
e
Goodluck!
Click to expand...
Click to collapse
Are You sure It wont ruin my phone> Coz I haven't seen any sprout user with xposed installed.
I am using philz revcovery.
thanks for asssistance
Coojlazz said:
Are You sure It wont ruin my phone> Coz I haven't seen any sprout user with xposed installed.
I am using philz revcovery.
thanks for asssistance
Click to expand...
Click to collapse
Are you kidding me?? Lol.
In fact I'd xposed framework installed on my sprout.
Nothing to worry dude, just do what I said there.
Oh, and you're on philz? Nothing to worry... Just go to philz > flash zip > reboot > once the boots up > install apk > done!
Don't install apk before installing zip via recovery.
Edit - look here for Screenies - http://imgur.com/a/1w2dF
sachin n said:
Are you kidding me?? Lol.
In fact I'd xposed framework installed on my sprout.
Nothing to worry dude, just do what I said there.
Oh, and you're on philz? Nothing to worry... Just go to philz > flash zip > reboot > once the boots up > install apk > done!
Don't install apk before installing zip via recovery.
Edit - look here for Screenies - http://imgur.com/a/1w2dF
Click to expand...
Click to collapse
Thanks for the help
successfull instalation of xposed and working modules
But Doze is not working
It drains battery at standby about 50% in 5 hours
Earlierthre was hardly 1-2% lose in battery
please help
Coojlazz said:
Thanks for the help
successfull instalation of xposed and working modules
But Doze is not working
It drains battery at standby about 50% in 5 hours
Earlierthre was hardly 1-2% lose in battery
please help
Click to expand...
Click to collapse
Which kernel are you using?
sachin n said:
Which kernel are you using?
Click to expand...
Click to collapse
The stock one I think.I havent flashed any custom kernel yet. Just running CM13 Snapshot Build.
Coojlazz said:
The stock one I think.I havent flashed any custom kernel yet. Just running CM13 Snapshot Build.
Click to expand...
Click to collapse
Just flash a custom kernel
sachin n said:
Just flash a custom kernel
Click to expand...
Click to collapse
any suggestions for a better kernel?
coz I am facing hotspot bug
Coojlazz said:
any suggestions for a better kernel?
coz I am facing hotspot bug
Click to expand...
Click to collapse
Tz/Zeus!
Edit - BTW, @Coojlazz that hotspot bug wasn't the kernel's, it's a Rom bug.