After I try to install 'G920F_SER_G920FXXU2BOG8", I got a boot loop. So I try some other Official Firmware, but they still does not work. So I follow the suggestion that install a customer OS 'G920FXXU2BOFJ_G920FOXA2BOFJ_XEF(4File)_ChoiMobile.VN', this is four files suit.
The solution to fix the boot loop is that:
1. full wipe devices
2. install only AP and BL
3. install AP / BL / CP / CSC.
I tried the solution yesterday, find that.
If I install AP / BL / CP /CSC at the same time, still enter a boot loop.
If I install only AP / BL / CP, devices can start, but it can't works normally. Now I find the 4G function is totally disabled. When i use other phone, I can search the LTE signal. But when I use this phone, it can only use 3G.
I suppose this problem is caused by no CSC file on the device.
So I try to change the CSC, but when I run some code like '*#6#', there is no output.
If I do a factory reset, the device will also enter a boot loop.
If I just enter a recovery mode, it still stuck at boot loop.
I don't know how to fix it in this case.
Can anybody give some suggestions?
Tnx!
Mate
Did you find any solution
Cuz im facing the exact same problem :/
Related
Please note:
Odin "Fail! (Auth)"s everytime I try to flash a stock / any pda or bootloader. Only one pda works - still end up on same screen
Phone boots to red triangle indicating required use of 'Verizon Software Repair Assistant'
Cannot install or find working download on the web for this tool - phone won't boot so cannot use phone as installer for tool either.
Can only get into stock recovery or download mode. Regular boot ends up in Verizon triangle warning screen
Have tried using stock recovery to do factory reset / cache wipe / etc
I just need that file, but any help will be appreciated. I did find a non-working download link for it (leads to a .exe that does nothing on multiple tested computers).
BearAdama said:
Please note:
Odin "Fail! (Auth)"s everytime I try to flash a stock / any pda or bootloader. Only one pda works - still end up on same screen
Phone boots to red triangle indicating required use of 'Verizon Software Repair Assistant'
Cannot install or find working download on the web for this tool - phone won't boot so cannot use phone as installer for tool either.
Can only get into stock recovery or download mode. Regular boot ends up in Verizon triangle warning screen
Have tried using stock recovery to do factory reset / cache wipe / etc
I just need that file, but any help will be appreciated. I did find a non-working download link for it (leads to a .exe that does nothing on multiple tested computers).
Click to expand...
Click to collapse
Give this softbrick a try http://forum.xda-developers.com/showthread.php?t=2586319
buhohitr said:
Give this softbrick a try http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
It looks like using the SUA_ar tool will work. It's downloading the software in the Repair Assistant. You saved me from so much stress! :victory:
repair phone is disable
go to download mod and and flash it again like this video
http://samsony.net/download.php?IDh=SCH-I535
Hello, today i tried to unbrand my Galaxy S6 Vodafone and i did:
1. Download a no branded firmware (i used this: G920IDVU1AOE3)
2. get download mode in my galaxy s6
3. upload firmware in odin 3.10.6 (AP)
3. i select start and firmware starts to flash
4. success flashing and i boot my phone(still crapware from my carrier, boot logo. vodafone apps, etc)
5. power off and got in recovery mode
6. wipe factory/data
7. boot it
and when i did the last boot it says: Vodafone Apps Installing, and the same crapware.
What happens if i select NAND erase all in ODIN?
There is a way to erase carrier logo?
Please HELP me
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Okay, so I attempted to unroot and flash the stock 5.0.2 software and I got a error on the download screen. It says SW REV. CHECK FAIL. DEVICE: 3. BINARY: 1.
If you have no knox install MM official then flash this kernel tar file (AP) https://drive.google.com/folderview?id=0B40ItdHKfkyQcTA5bnRPWDg0X28&usp=drive_web#list it will boot to mm 5min :good:
Btw you cann downgrade from 5.1.1 to 5.0.1 you just go up not down
zach616 said:
downloaded twrp 3, was running 5.1.1 on my phone and rooted it. tried to flash a rom and got stuck in a bootloop, now I cant boot into twrp, or anything for that matter. All i can do is hold volume down and power and home and try to ODIN a new bootloader or such and it just fails. what do i do? but when I try to boot into TWRP it goes into a blueish screen with a White exclamation mark saying "An error has occurred while updating the device software. Use the Emergency recovery function in the smart switch PC software. I tried to do that but it didnt even recognize the device. At this point i dont care about the data, I just need a working device
Click to expand...
Click to collapse
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
emcardle660 said:
Happened to me a lot of times in the past few days trying to get MM, for some weird reason flashing Unikernel always works for me (takes me to recovery screen after, then i select 'reboot now'), and all my data, apps etc are still there
Click to expand...
Click to collapse
will try and update. thank you. didnt work.
Okay guys so now I need a ROM to flash using ODIN. I tried to download from sammobile but the speeds are too damn slow. What I tried to flash was this file " G920TUVU1AOCG_G920TTMB1AOCG_G920TUVU1AOCG_HOME.tar.md5 " and i got the error 3 to 1.
Download Samfirm from here, XDA itself.
Run samfirm, enter model as G920F and your region code.
It will download from Samsung servers, so high speed.
Now flash using Odin the downloaded file by putting the phone in download mode, (vol down+home+power on).
How did it happen?
Did you try to flash the VOD 6.0.1 and got stuck towards the end at hidden.IMG failing the process?
If yes, then its a two minute job. Just open the 6.0.1 tar archive and look for hidden.IMG extract it anywhere and rename it from "hidden.img" to "hidden.img.tar".
Note flash this hidden.img.tar as AP in download mode, your phone should boot.
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Um if you bought it from a samsung store, then take it back there.
my sasmsung galxy sm-j700f suddenly reboot to samsung lable
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
try this guide I made for restoring stock firmware from Samsung sever with the smartswitch app for Windows.
http://forum.xda-developers.com/galaxy-j7/j700t-development/how-to-restore-j700t1-model-to-t3423455
but you NEED YOUR SERIAL# AND MODEL # of that phone!
Fix # I dont know - if it works
Try this if it helps....
You will need ( link unavailable due to my little amount of posting and not using this account):
Galaxy J7 USB Drivers for the phone
The stock ROM for the phone (exact firmware)
Odin
First install Samsung Galaxy J7 USB drivers on Windows PC. Then Download the Samsung Galaxy J7 Stock Firmware from the link above and extract the folder on your desktop.
Download ODIN flash tool to flash the firmware on your phone. Extract the folder and you will see the ODIN.exe file in the folder.
Now Turn off your Galaxy J7 and Boot in download mode.(Hold down Volume Down + Home + Power button at the same time)
Once your Galaxy J7 is in download mode. Connect it to the PC with USB cable and run the ODIN.exe file on your desktop.
If everything is right and drivers are working properly. You will see the blue box on the ODIN screen, if not reinstall the drivers again and reboot your PC.
Now select the AP option from the ODIN screen and select the firmware file that you extracted
Hit the Start button from the ODIN screen to start the flashing process.
Once completed you will see the PASS messages on the ODIN and Phone will reboot automatically. Now you can disconnect your phone.
IMPORTANT:. If your phone is still stuck on the boot loop or in the Samsung Android Logo, then turn off the phone and reboot in recovery mode. TO do this Hold down Volume Up + Home + Power button at the same time. Now from recovery select Wipe Data/Factory Reset and after that Wipe cache partition. Now reboot you phone. If you are using a custom recovery, just wipe data/factory reset and wipe cache partition again.
DONE!!!! You unbricked your Galaxy J7. Now your Phone is running the stock ROM. Check it on the setting. ENJOY..
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
hazembadr00 said:
my mobile unable to open it flash to me "sasmung galaxy j7 powered by android" and it refuse to open then i flash the custom firmware by odin many times but it did not work then it try to flash twrp recovery and wibe data (factory reset )it did not work
Help please
Click to expand...
Click to collapse
Can you not hijack threads and make your own please?
Samsung J6 Touch Not Working
J6 touch not working after official update
gitompak said:
Here's the story,
This is my dad's phone. He just recently bought it. Out of nowhere, it stuck in bootloop (screen only show phone's model). He asked me if I can fix it.
I tried recovery mode and failed. It can't enter recovery mode. So I should fix it via download mode, right?
The thing is, I don't even know the firmware's phone. So I'm assuming it is Indonesian, cause I live in Indonesia.
I flash using odin and it passed but the phone still stuck.
When rebooting, the boot screen flashing 3-5 times (show phone's model - black screen - show phone's model - black screen - and so on), then stuck at boot screen again.
This is weird. So I thought maybe wrong firmware. I tried India and Phillipines (global) firmware too but the problem still exist.
I don't know how to solve it. Please help.
Phone's model: SM-J700F/DS
Click to expand...
Click to collapse
Try to install TWRP on the phone, then try to wipe out the stock firmware that installed. And of course, reinstall the original stock firmware that come on that region. Its actually came from Indonesia, so be sure to install the right one.
Sijaygamer said:
What is the recommended firmware for
SM-J700F/DS?? Can I flash it with any SM-J700F ?
Thanks!
Click to expand...
Click to collapse
i need to know the answer for this please
i"ve tried every j700f rom out there nothing worked for me
is there any OFFICIAL firmware for the j700f/ds model ?
Could Not find stock firmware T377AUCU3BRD1 anywhere but one site for $5. Being as my tablet was in-op, I ponied up and paid. Uploaded firmware to Google Drive.
https://drive.google.com/open?id=13FdY0w6mWZQvlZPyGB0AHMswAM0FNsSf
Now this is what I did...
If you would like a less bloated version then follow these steps.
Flashing the firmware this way gave me only 3 AT&T apps, Native Hotspot (without option on plan), ALL SPEED BACK after update from 6.0.1 to 7.1.1, Charging speed returned as well.
Shows 4G when connected as LTE, H+ -> 3G
Takes a full 20 minutes to boot afterwards, Don't worry just let it sit
1) Boot into Odin Download Mode
2) Open ODIN and Load BL, AP, and CP only (Leave out the CSC)
3) Under Option tab ensure Auto Reset, Nand Erase, F. Reset Time are the only options selected.
4) Flash
5) Tablet boots into recovery, Perform a data and cache wipe
6) Reboot and wait the 20 minutes for the tablet to boot
7) I also went into Developers Options and deselected Auto Update System. Not sure if this is for OTA's or not, but hoping
Houckinternet said:
Could Not find stock firmware T377AUCU3BRD1 anywhere but one site for $5. Being as my tablet was in-op, I ponied up and paid. Uploaded firmware to Google Drive.
https://drive.google.com/open?id=13FdY0w6mWZQvlZPyGB0AHMswAM0FNsSf
Now this is what I did...
If you would like a less bloated version then follow these steps.
Flashing the firmware this way gave me only 3 AT&T apps, Native Hotspot (without option on plan), ALL SPEED BACK after update from 6.0.1 to 7.1.1, Charging speed returned as well.
Shows 4G when connected as LTE, H+ -> 3G
Takes a full 20 minutes to boot afterwards, Don't worry just let it sit
1) Boot into Odin Download Mode
2) Open ODIN and Load BL, AP, and CP only (Leave out the CSC)
3) Under Option tab ensure Auto Reset, Nand Erase, F. Reset Time are the only options selected.
4) Flash
5) Tablet boots into recovery, Perform a data and cache wipe
6) Reboot and wait the 20 minutes for the tablet to boot
7) I also went into Developers Options and deselected Auto Update System. Not sure if this is for OTA's or not, but hoping
Click to expand...
Click to collapse
Thanks man i appreciate it i have been looking forever for this update since my tablet was stuck in factory binary mode
what is the button sequence for odin bootloader
---------- Post added at 08:01 AM ---------- Previous post was at 07:58 AM ----------
alphaeagle777 said:
what is the button sequence for odin bootloader
Click to expand...
Click to collapse
nvm i got it
It's not letting me extract the firmware download
sara.bradley said:
It's not letting me extract the firmware download
Click to expand...
Click to collapse
I found this z3e warez tool with kgen and loader which had everything but no access to (database)
I also found stock fw download t337a boxwarez.tz.md5
Igot that program to back up my pit
And flash stock binary loader
Developer options could be used in stock binary but not oem unlock
Ifound a Odin tool and tar.tool
I found a downgraded modem.img which allows oem unlock
I found this op source 7.1.1 stock
7zip un pack the
I used above method to flash but I did check csc and then pitfile targeted my backup pit flashed
Remove sim setup device connect to WiFi when it ask for new lock code or email do not enter them
Go to settings security lock change swipe to none
Power off phone
Odin boot download mode
Force shut down
Odin boot download mode but cancel this time
In the recovery bootloader now go to security wipe and cache whipe
Reboot
On launch back in system go to settings
Back ups erase device
Spent last three days on this but the Knox and frp should be disabled now as long as you don't assign Samsung email or lock screen code just
Go to Odin boot reboot Odin / cancel and then should be able to start flashing custom stuff
please help
I was able to follow this ( first part of this thread) and everything passed in odin and I continued with instructions .. but I still have the frp lock .. I have no means to recover the orginal google account … I know this is a old thread but would someone be so kind as to help me please ?
For the frp problem
Use the Eng boot file at mediafire .com/file/lbhc0vcs28tr6aj/SM-T377A_ENG_BootFile_PakFirmware.com.rar/file You have to flash this file, it'll open USB debugging on the phone, use any box to bypass from or run
Code:
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
Then flash only the boot file from the original firmware back, go through settings, backup and reset, and factory reset the tab
kagbontaen said:
Use the Eng boot file at mediafire .com/file/lbhc0vcs28tr6aj/SM-T377A_ENG_BootFile_PakFirmware.com.rar/file You have to flash this file, it'll open USB debugging on the phone, use any box to bypass from or run
Code:
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
Then flash only the boot file from the original firmware back, go through settings, backup and reset, and factory reset the tab
Click to expand...
Click to collapse
Thank you so much for taking the time to help me with this. I am following your instructions as I type this .. Its good to know that they are still people out there willing to help ..
Ray-In-VA said:
Thank you so much for taking the time to help me with this. I am following your instructions as I type this .. Its good to know that they are still people out there willing to help ..
Click to expand...
Click to collapse
I kept getting error with file , after removing the .md5 from end of it it flashed ok . my next step is how do I write the suggested code to the device ?
Awesome work, thanks for sharing!
Houckinternet said:
Could Not find stock firmware T377AUCU3BRD1 anywhere but one site for $5. Being as my tablet was in-op, I ponied up and paid. Uploaded firmware to Google Drive. (link removed b/c I'm a noob!)
1) Boot into Odin Download Mode
2) Open ODIN and Load BL, AP, and CP only (Leave out the CSC)
3) Under Option tab ensure Auto Reset, Nand Erase, F. Reset Time are the only options selected.
4) Flash
5) Tablet boots into recovery, Perform a data and cache wipe
6) Reboot and wait the 20 minutes for the tablet to boot
Click to expand...
Click to collapse
You sir are a GOD AMONG MEN. I ought to buy you a coffee or a beer for this. I had gotten my Tab E T377A stuck in factory-binary mode (also able to boot to Odin of course), but I could not find a CLEAN stock FW anywhere that matched my version. YOURS did the trick! You rock. Thank you so much for posting this and for sharing the Google Drive link and your hard-earned $5. <3
I still had to go thru Google FRP unlock, unfortunately, but thank heavens the owner DID finally remember their login info. What a nightmare, almost.