Hello to all.
Well, I have an old Motorola Cliq XT (mb501) (a friend gave it to me) that I want use like a backup phone. This smartphone has an old Android version (Android 1.5, official ROM) and I can't use basic apps like WhatsApp or Facebook Lite, so I tried upgrade to Android 2.3 using CM7. I downloaded it and I decide use the official CM guide. I haven't got any problem rooting and installing the custom recovery, but when I want boot to recovery mode is necessary use the camera and the power button. And here is the problem: this phone apparently have it (see this photo) but, if you disarm it, there is nothing and I can't boot the recovery. Is there a way to boot the recovery without using the camera button?
Regards and sorry for my broken english.
Additional info:
Info on Cyanogen Wiki: https://wiki.cyanogenmod.org/w/Zeppelin_Info
Cyanogen guide: https://wiki.cyanogenmod.org/w/Install_CM_for_zeppelin
Custom rom (CM 7.2): http://download.cyanogenmod.org/?type=stable&device=zeppelin
ranixon said:
Hello to all.
Well, I have an old Motorola Cliq XT (mb501) (a friend gave it to me) that I want use like a backup phone. This smartphone has an old Android version (Android 1.5, official ROM) and I can't use basic apps like WhatsApp or Facebook Lite, so I tried upgrade to Android 2.3 using CM7. I downloaded it and I decide use the official CM guide. I haven't got any problem rooting and installing the custom recovery, but when I want boot to recovery mode is necessary use the camera and the power button. And here is the problem: this phone apparently have it (see this photo) but, if you disarm it, there is nothing and I can't boot the recovery. Is there a way to boot the recovery without using the camera button?
Regards and sorry for my broken english.
Additional info:
Info on Cyanogen Wiki: https://wiki.cyanogenmod.org/w/Zeppelin_Info
Cyanogen guide: https://wiki.cyanogenmod.org/w/Install_CM_for_zeppelin
Custom rom (CM 7.2): http://download.cyanogenmod.org/?type=stable&device=zeppelin
Click to expand...
Click to collapse
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Vivek_Neel said:
Hi, thank you for using XDA assist.
There is a general forum for android here http://forum.xda-developers.com/android/help where you can get better help and support if you try to ask over there.
Good luck.
Click to expand...
Click to collapse
Thank you, thread moved to http://forum.xda-developers.com/android/help/help-install-cm7-motorola-cliq-xt-t3201085
This can be closed.
Related
I am using Motorola defy plus (Model MB526, Android Version 2.3.6, System version 45.0.2310.MB526.AsiaRetail.en03, Build number 4.5.1-134_DFP-231, Kernel version 2.6.32.0-ge281b6e). Its camera lens are red not green.
I have rooted my phone and would like to update with Kitkat or the latest android version. There are so many posts available but I am not sure which one to follow. I also want take backup of current ROM so that if if anything wrong happens I can restore it.
Please help me to find out which the post will work for me.
Thanks,
Atul
Hi
Thanks for writing to us at XDA Assist. Are you wanting to use a custom ROM or stock firmware?
All information for your device can be found in this device forum:
Motorola Defy
No respnose in two days, thread closed.
HI everyone!
I just recently installed V20a lollipop on my phone via LG OTA update, rooted it using 1 click root and installed bootloader using the method found on the MLKernel thread (run batch file > installs chinese recovery > install app to install english philz).
I was wondering, can I flash another kind of 5.0 based ROM on top of what I have now? (rooted stock w/ recovery and custom kernel) or do I have to go through several hoops like bootloader unlock? I know for sure the Optimus G requires an unlocked bootloader (my phone before this).
I was planning on flashing a 5.0 ROM i found on a random site that's built like stock android (i love stock), but I'm not sure if there are any more pre-requisites before flashing.
ADDED:
Here's the link to the site i found: http://www.unlock-bootloader.info/mp3-0/lg-g-pro-2-6052.html
If it makes any difference, my device is the international D838 16gb version.
Can anyone point me in the right direction? thanks
what kind of rom is this? stock with original lollipop theme?
jabi_james said:
what kind of rom is this? stock with original lollipop theme?
Click to expand...
Click to collapse
That is something I do not know and would like to find out, hence the thread.
care to help out a fellow G Pro 2 user?
vangeodee said:
That is something I do not know and would like to find out, hence the thread.
care to help out a fellow G Pro 2 user?
Click to expand...
Click to collapse
I do not think its a genuine ROM. Following is the give away:-
In tutorial it says:-
1. Install the ROM Manager on your LG G Pro 2 . Get it from Google Play Store, then install the clockwork mod recovery. You also can use ROM Installer application from JRummy Apps Inc.(Get it from Google Play Store).
ROM Manager is not compatible with GPRO2. You cannot install recovery like that on GPro 2
2. There is no AOSP/AOKP/CM/Google Stock (screenshots are for some CM type ROM) available for our device.
3. The link Tutorial Video : Easy Way To Download ROM mentioned on the page is a video for some survey filling tutorial.
Honestly I did not have the guts to check the download links.
Regards,
Cyrus
After root & flashing tab 2 is not not working properly (Android 5.1 Lollipop CM12.1)
I never flashed and rooted and android before so today I tried on my tab 2 gt-p3100 and results are not good. After flashing the custom rom my internet is not working properly. Specially 3g is not working and 2g is now slow also restricting me to use some websites and play store too. I never expected such results from It. Please advise me what should I do now. Can I go back to the official Samsung's status how it was when I purchased (unrooted and 4.1.1.) .
Also if 5.1 is not compatible to my device, than what should be the best custom rom for it?
I installed Android 5.1 Lollipop CM12.1 custom ROM
XDA Visitor said:
I never flashed and rooted and android before so today I tried on my tab 2 gt-p3100 and results are not good. After flashing the custom rom my internet is not working properly. Specially 3g is not working and 2g is now slow also restricting me to use some websites and play store too. I never expected such results from It. Please advise me what should I do now. Can I go back to the official Samsung's status how it was when I purchased (unrooted and 4.1.1.) .
Also if 5.1 is not compatible to my device, than what should be the best custom rom for it?
I installed Android 5.1 Lollipop CM12.1 custom ROM
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-tab-2
After creating your account, please post your question here:
http://forum.xda-developers.com/galaxy-tab-2/help
The experts for your device are located there and will be able to help.
Good luck!
Okay, im a new member here i live in Indonesia. Several days ago i tried to flash my AXIOO Gjt (a clone of LY-F918) and running a stock rom of android 4.0 ics. For some unknown reason it bricked and i flashed it the F918 img. And its working very fine. With that rom i rooted it and appying xppsed modification. After ot i followed tutorial on a forum to flash an a10 (my tabletis a10 sun4i) with aokp 4.1.1 jelly bean and im forgot to install the compativilityzip and gapps zip andjust installed the rom on cwm and rebooted it. And now its bootloop stuvk in aokp ritating circle bootanim. And when i wanted to flash it via livesuit it cant enter recovery. Plss helpp..Thx, any help is highly appreciated.
XDA Visitor said:
Okay, im a new member here i live in Indonesia. Several days ago i tried to flash my AXIOO Gjt (a clone of LY-F918) and running a stock rom of android 4.0 ics. For some unknown reason it bricked and i flashed it the F918 img. And its working very fine. With that rom i rooted it and appying xppsed modification. After ot i followed tutorial on a forum to flash an a10 (my tabletis a10 sun4i) with aokp 4.1.1 jelly bean and im forgot to install the compativilityzip and gapps zip andjust installed the rom on cwm and rebooted it. And now its bootloop stuvk in aokp ritating circle bootanim. And when i wanted to flash it via livesuit it cant enter recovery. Plss helpp..Thx, any help is highly appreciated.
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist.
Strange that the ROM didn't refuse to install if it wasn't compatible. As a general rule, this is something to never try (installing a ROM across devices).
Nonetheless, you should still have access to fastboot. From there, you can flash back stock (if stock is to e found), or CWM which will bring that back (at that point you could try the compatibility + gapps zips).
At any rate, please go ahead and create an account, so you can post in other forums. From there, explain your situation in the following thread:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Hope this helps, and good luck!
So I decided to take my old AT&T Fusion 2 and upgrade it to android 4.0.3. I installed clockworkmod 6 and flashed the ProFusion rom with CyanogenMod 10.1. All went well, but bluetooth isn't working and the site that the rom originally came from, no longer exists so the bluetooth fix method that is used to fix the issue isn't available for download. Is there a way (and I'm new to android development, but willing to take any steps necessary) to rewrite the bluetooth code so that my phone is compatible with bluetooth again? This rom is the only rom compatible with my phone
Drahcir-II said:
So I decided to take my old AT&T Fusion 2 and upgrade it to android 4.0.3. I installed clockworkmod 6 and flashed the ProFusion rom with CyanogenMod 10.1. All went well, but bluetooth isn't working and the site that the rom originally came from, no longer exists so the bluetooth fix method that is used to fix the issue isn't available for download. Is there a way (and I'm new to android development, but willing to take any steps necessary) to rewrite the bluetooth code so that my phone is compatible with bluetooth again? This rom is the only rom compatible with my phone
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
It looks like there is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.