Custom recovery to ARMLOGIC MESON3 8726M SKT SH? - Android General

Hello folks. I have an intriguing tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom recovery on it and then try to change the rom because it comes in it is terrible.
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Compile manually and try to install?
Thank you all. (Sorry my english)
Thanks for all.

Related

[Q] Intel 3735D e-star tablet - install windows??

Hellow, i have just received a tablet with intel quad core processor. It is verry similat to other chinese tablets which have windows and android dual boot. Is it possible to flash other firmware or to install just windows??
here is the debug info from cpuz:
CPUs : 4
SoCs : 1
CPU 0 : ARMv7 processor rev 1 (v7l)
Name : Intel 0x1
CPUs : 4
Core set 0 : Intel 0x1
Core set 0 Nb Cores : 4
Core set 0 Max Clock : 1826 MHz
Core set 0 Impl.id : 0x69
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 1
Core set 0 Part.id : 0x1
Core set 0 Rev.id : 1
Core set 0 Revision : r1p1
Arch : 4x Intel 0x1 @1,83 GHz
Codename :
GPU Vendor : Intel
GPU Renderer : Intel(R) HD Graphics for BayTrail
Model : ota test (MID9768)
Manufacturer : eSTAR
Board : MID9768
Hardware : byt_t_ffrd10
Android Ver. : 4.2.2
Kernel Arch. : armv7
Battery capacity : 4000
--- CPUInfos ---
abi : armeabi-v7a
abi2 : armeabi
Processor : ARMv7 processor rev 1 (v7l)
BogoMIPS : 1500.0
Features : neon vfp swp half thumb fastmult edsp vfpv3
CPU implementer : 0x69
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x001
CPU revision : 1
Hardware : placeholder
Revision : 0001
Serial : 0000000000000001
--- Debug Infos ---
0=bq27441=30400
1=SoC_DTS0=25000
2=SoC_DTS1=25000
3=SYSTHERM0=30861
4=skin0=20724
5=skin1=29506
6=PMICDIE=34940
19=coretemp=-18000
clock0=1826000
clock1=1826000
clock2=1826000
clock3=1826000
anyone?? huh i belive i just need bios to flash it to my device....
vortexfoto said:
Hellow, i have just received a tablet with intel quad core processor. It is verry similat to other chinese tablets which have windows and android dual boot. Is it possible to flash other firmware or to install just windows??
here is the debug info from cpuz:
CPUs : 4
SoCs : 1
CPU 0 : ARMv7 processor rev 1 (v7l)
Name : Intel 0x1
CPUs : 4
Core set 0 : Intel 0x1
Core set 0 Nb Cores : 4
Core set 0 Max Clock : 1826 MHz
Core set 0 Impl.id : 0x69
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 1
Core set 0 Part.id : 0x1
Core set 0 Rev.id : 1
Core set 0 Revision : r1p1
Arch : 4x Intel 0x1 @1,83 GHz
Codename :
GPU Vendor : Intel
GPU Renderer : Intel(R) HD Graphics for BayTrail
Model : ota test (MID9768)
Manufacturer : eSTAR
Board : MID9768
Hardware : byt_t_ffrd10
Android Ver. : 4.2.2
Kernel Arch. : armv7
Battery capacity : 4000
--- CPUInfos ---
abi : armeabi-v7a
abi2 : armeabi
Processor : ARMv7 processor rev 1 (v7l)
BogoMIPS : 1500.0
Features : neon vfp swp half thumb fastmult edsp vfpv3
CPU implementer : 0x69
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x001
CPU revision : 1
Hardware : placeholder
Revision : 0001
Serial : 0000000000000001
--- Debug Infos ---
0=bq27441=30400
1=SoC_DTS0=25000
2=SoC_DTS1=25000
3=SYSTHERM0=30861
4=skin0=20724
5=skin1=29506
6=PMICDIE=34940
19=coretemp=-18000
clock0=1826000
clock1=1826000
clock2=1826000
clock3=1826000
Click to expand...
Click to collapse
vortexfoto said:
anyone?? huh i belive i just need bios to flash it to my device....
Click to expand...
Click to collapse
bump, no answer at all, i tried myswlf but i cant get bios to work, i know this tablet is supported because they will soon release same tablet but with windows but they wont send me files :/

Galaxy J7 Prime SM-G6100, Qualcomm MSM8953, what TWRP?

Hi,
I received a Galaxy J7 Prime, but it seems to have a Qualcomm MSM8953.
It has as type SM-G6100, so I wonder what TWRP I need.
Any advice?
Thanks,
From Android System Info:
--
Device: on7xltechn
Product: on7xltezh
Fingerprint: samsung/on7xltezh/on7xltechn:6.0.1/MMB29M/G6100ZHU1APL3
--
From /proc/cpuinfo (8 cores, shortened):
--
processor : 7
model name : AArch64 Processor rev 4 (aarch64)
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Qualcomm Technologies, Inc MSM8953
Revision : 0005
Hardware : Qualcomm Technologies, Inc MSM8953
--
I did a small search and unfortunately i can't find one for your device.
Oh. I know it. This I galaxy on 7 but it's installed ROM of galaxy j7 prime (because it isn't different except chip Qualcomm and exynose)
Are there any news about that? I need that too...

Tecno POP 2 plus (Tecno BA2) Rooting

Hi, I am having difficulties rooting my device. Please, does anyone have an exploit that I can use to root the device? (BTW it is running Oreo - 8.1)
I have unlocked the bootloader and have tried all sorts of tools to root the device (Kingo Root, VRoot, etc), but to no avail. What I want to do (eventually) is port Lineage OS for the device.
The device info is as follows:
DEVICE
Model: TECNO BA2 (H8027)
Manufacturer: TECNO MOBILE LIMITED
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V222, 2019/06/18 10:42
RIL Version: android reference-ril 1.0
Build Number: BA2-H8027ABC-OGo-190710V263
Build Fingerprint: TECNO/H8027/TECNO-BA2:8.1.0/O11019/ABC-190710V263:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (8.1.0)
SDK: 27
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: TECNO-BA2
Chipset: MT6580M
Cores: 4
Clock Speed: 604 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79+
Kernel Architecture: armv7l
Any help would be really appreciated.

Need Rom Moto C

Hello everyone in this forum, I am am looking for a solution to my problem ..
This is my phone information :
**
DISPOSITIF
Modèle: Moto C (namath_54)
Fabricant: motorola
Version de bande de base: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P59, 2018/11/09 15:47
Version de RIL: android reference-ril 1.0
Numéro de build: NRD90M.062
Définir l'empreinte digitale: motorola/namath_54/namath:7.0/NRD90M.062/1553044434:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
Version OS: Nougat (7.0)
SDK: 24
PROCESSEUR
Architecture du CPU: ARMv7 Processor rev 4 (v7l)
Board: unknown
Chipset: MT6737M
Coeurs: 4
Vitesse d'horloge: 221 MHz - 1092 MHz
Sets d'instructions: armeabi-v7a, armeabi
Caractéristiques du CPU: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm sha2
Gouverneur du CPU: interactive
Version du noyau: 3.18.35+
Architecture du noyau: armv7l
GRAPHIQUE
Rendeur: Mali-T720
Vendeur: ARM
Version OpenGL: OpenGL ES 3.1
RAM
Total: 907 MB
Monceau Java: 16 MB
**
-- Recently it has been running slow and some applications do not start and many windows appear (this application does not work)
I will not prolong you. I have modified it and I do not know how to find a suitable ROM for it. ## Please help me to search for a ROM that matches this information so I can avoid all errors. ##

Help

I need help rooting my phone I could not get it any exploding with the app DevCheck Report
ZTE
ZTE 981
HARDWARE
Qualcomm® Snapdragon™ 617
Hardware: MSM8952
Cores: 8
CPU:
4 x Cortex-A53
4 x Cortex-A53
Process: 28 nm
Frequencies:
806 MHz - 1209 MHz
offline
Governor: interactive
GRAPHICS
Vendor: Qualcomm
GPU: Adreno (TM) 405
OpenGL: OpenGL ES 3.1 [email protected] ([email protected])
Max frequency: 550 MHz
RAM 32 GB
RAM size: 2 GB
Type: LPDDR3 933 MHz
Bandwidth: 14.9 GB/s
Channels: 32-bit dual channel
Storage
Size: 32 GB
Filesystem: ext4
OTHER HARDWARE
Bluetooth support: Yes
Bluetooth LE support: Yes
USB host support: Yes
Infrared transmitter: No
NFC support: No
DEVICE
Model: Z981
Codename: urd
Manufacturer: ZTE
Serial Number: a07d8f1
SYSTEM
Android Version: 6.0.1 (Marshmallow)
Build: Z981V1.0.0B21
Security patch: August 1, 2017
Architecture: aarch64 (64-bit)
Instruction sets: arm64-v8a armeabi-v7a armeabi
Kernel: 3.10.84-perf-gcdba782-00725-g9a1b90d #1
[email protected]
gcc version 4.9.x-google 20140827 (prerelease) (GCC)
Wed Aug 2 13:48:17 CST 2017

Categories

Resources