Hellow, i have just received a tablet with intel quad core processor. It is verry similat to other chinese tablets which have windows and android dual boot. Is it possible to flash other firmware or to install just windows??
here is the debug info from cpuz:
CPUs : 4
SoCs : 1
CPU 0 : ARMv7 processor rev 1 (v7l)
Name : Intel 0x1
CPUs : 4
Core set 0 : Intel 0x1
Core set 0 Nb Cores : 4
Core set 0 Max Clock : 1826 MHz
Core set 0 Impl.id : 0x69
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 1
Core set 0 Part.id : 0x1
Core set 0 Rev.id : 1
Core set 0 Revision : r1p1
Arch : 4x Intel 0x1 @1,83 GHz
Codename :
GPU Vendor : Intel
GPU Renderer : Intel(R) HD Graphics for BayTrail
Model : ota test (MID9768)
Manufacturer : eSTAR
Board : MID9768
Hardware : byt_t_ffrd10
Android Ver. : 4.2.2
Kernel Arch. : armv7
Battery capacity : 4000
--- CPUInfos ---
abi : armeabi-v7a
abi2 : armeabi
Processor : ARMv7 processor rev 1 (v7l)
BogoMIPS : 1500.0
Features : neon vfp swp half thumb fastmult edsp vfpv3
CPU implementer : 0x69
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x001
CPU revision : 1
Hardware : placeholder
Revision : 0001
Serial : 0000000000000001
--- Debug Infos ---
0=bq27441=30400
1=SoC_DTS0=25000
2=SoC_DTS1=25000
3=SYSTHERM0=30861
4=skin0=20724
5=skin1=29506
6=PMICDIE=34940
19=coretemp=-18000
clock0=1826000
clock1=1826000
clock2=1826000
clock3=1826000
anyone?? huh i belive i just need bios to flash it to my device....
vortexfoto said:
Hellow, i have just received a tablet with intel quad core processor. It is verry similat to other chinese tablets which have windows and android dual boot. Is it possible to flash other firmware or to install just windows??
here is the debug info from cpuz:
CPUs : 4
SoCs : 1
CPU 0 : ARMv7 processor rev 1 (v7l)
Name : Intel 0x1
CPUs : 4
Core set 0 : Intel 0x1
Core set 0 Nb Cores : 4
Core set 0 Max Clock : 1826 MHz
Core set 0 Impl.id : 0x69
Core set 0 Arch.id : 0x7
Core set 0 Var.id : 1
Core set 0 Part.id : 0x1
Core set 0 Rev.id : 1
Core set 0 Revision : r1p1
Arch : 4x Intel 0x1 @1,83 GHz
Codename :
GPU Vendor : Intel
GPU Renderer : Intel(R) HD Graphics for BayTrail
Model : ota test (MID9768)
Manufacturer : eSTAR
Board : MID9768
Hardware : byt_t_ffrd10
Android Ver. : 4.2.2
Kernel Arch. : armv7
Battery capacity : 4000
--- CPUInfos ---
abi : armeabi-v7a
abi2 : armeabi
Processor : ARMv7 processor rev 1 (v7l)
BogoMIPS : 1500.0
Features : neon vfp swp half thumb fastmult edsp vfpv3
CPU implementer : 0x69
CPU architecture: 7
CPU variant : 0x1
CPU part : 0x001
CPU revision : 1
Hardware : placeholder
Revision : 0001
Serial : 0000000000000001
--- Debug Infos ---
0=bq27441=30400
1=SoC_DTS0=25000
2=SoC_DTS1=25000
3=SYSTHERM0=30861
4=skin0=20724
5=skin1=29506
6=PMICDIE=34940
19=coretemp=-18000
clock0=1826000
clock1=1826000
clock2=1826000
clock3=1826000
Click to expand...
Click to collapse
vortexfoto said:
anyone?? huh i belive i just need bios to flash it to my device....
Click to expand...
Click to collapse
bump, no answer at all, i tried myswlf but i cant get bios to work, i know this tablet is supported because they will soon release same tablet but with windows but they wont send me files :/
Related
Hi,
I want build custom modules for kernel, but my problem is that I can't find config.gz. I'm searching in few places on system but no result :/.
I need compile pl2303 driver for GPS USB. I need this solution because my device don't have bluetooth.
My device is Fun Tab 7.0 (specification: www[dot]orange[dot]pl/kid,4002009501,id,4002825896,title,Neostrada-z-tabletem,article.html (only in polish)).
I use this tutorial for compile drivers: android[dot]serverbox[dot]ch/?p=285
I try to configure kernel manually, but no result, module don't load due to version magic issue
Is another way to get kernel configuration?
Code:
cat /proc/version
Linux version 3.0.8 ([email protected]) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #5 PREEMPT Thu Aug 23 16:37:30 CST 2012
Code:
cat /proc/cpuinfo
Processor : ARMv7 Processor rev 2 (v7l)
BogoMIPS : 1001.88
Features : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun5i
Revision : 0000
Hello Mate.!
Did you find the answers for your question?
If yes, please let me know. Even I am looking for the same.
Hi,
I'm new here. I need new rom for my phone. This phone wifi very poor, cannot go to playstore. GPS and alot problem.
Phone Model : Galaxy S4
Phone Brand: SPRD
CPU Model: Dual Core ArmV7 Processor rev1
CPU Frequency : 1024
CPU Manufacturers : MT6589
Andriod : 4.2.2
Version MocorDriod 4.2.2.W12.20_p20.01
Kernal : 2.6.35.7 [email protected]
Screen: 480 x 854
Software Version : JDQ39.I9500ZSUAMDF
Hello folks. I have an intriguing tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom recovery on it and then try to change the rom because it comes in it is terrible.
Specs:
Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4
Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c
What are my options? Compile manually and try to install?
Thank you all. (Sorry my english)
Thanks for all.
Hi,
I received a Galaxy J7 Prime, but it seems to have a Qualcomm MSM8953.
It has as type SM-G6100, so I wonder what TWRP I need.
Any advice?
Thanks,
From Android System Info:
--
Device: on7xltechn
Product: on7xltezh
Fingerprint: samsung/on7xltezh/on7xltechn:6.0.1/MMB29M/G6100ZHU1APL3
--
From /proc/cpuinfo (8 cores, shortened):
--
processor : 7
model name : AArch64 Processor rev 4 (aarch64)
Features : fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Qualcomm Technologies, Inc MSM8953
Revision : 0005
Hardware : Qualcomm Technologies, Inc MSM8953
--
I did a small search and unfortunately i can't find one for your device.
Oh. I know it. This I galaxy on 7 but it's installed ROM of galaxy j7 prime (because it isn't different except chip Qualcomm and exynose)
Are there any news about that? I need that too...
Hi, I am having difficulties rooting my device. Please, does anyone have an exploit that I can use to root the device? (BTW it is running Oreo - 8.1)
I have unlocked the bootloader and have tried all sorts of tools to root the device (Kingo Root, VRoot, etc), but to no avail. What I want to do (eventually) is port Lineage OS for the device.
The device info is as follows:
DEVICE
Model: TECNO BA2 (H8027)
Manufacturer: TECNO MOBILE LIMITED
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V222, 2019/06/18 10:42
RIL Version: android reference-ril 1.0
Build Number: BA2-H8027ABC-OGo-190710V263
Build Fingerprint: TECNO/H8027/TECNO-BA2:8.1.0/O11019/ABC-190710V263:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O MR1 (8.1.0)
SDK: 27
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: TECNO-BA2
Chipset: MT6580M
Cores: 4
Clock Speed: 604 MHz - 1300 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
CPU Governor: interactive
Kernel Version: 3.18.79+
Kernel Architecture: armv7l
Any help would be really appreciated.