I made a fix for AT&T Galaxy S4 Stagefright vulnerability.
Attached the zip file for you to flash.
Below pictures of the device before and after applying the patch.
Please rate 5 stars and thank, it doesn't cost you anything.
Note: This fix is for AT&T Lollipop ROMs on or after OC3 version.
KitKat users: Please, don't even try to flash this fix!
Giving it a shot now.
---------- Post added at 09:24 PM ---------- Previous post was at 09:16 PM ----------
Installed on OC3 rooted via flashfire and it worked great. Thanks!
Hidden - mistaken info that I posted
Applied the update from I337UCUFNJ4 [4.4.4].
It wiped and reset my phone.
Hidden - incorrect info that I posted
I took a picture of my screen with another phone while the zip was running
https://drive.google.com/file/d/0B3ePa0Zibh6URUNpeGlMdFVnV0E/view?usp=sharing
https://drive.google.com/file/d/0B3ePa0Zibh6URXZqZl9FeXpVNjA/view?usp=sharing
Hidden - incorrect info that I posted
I did make note before I flashed that I had two different zips on my sd card. One was this stagefright fix and another was 2400258.zip which was leftover from some previous flashing. I was consious not to pick that file and I'm reasonably sure I didn't (unless maybe I got confused by the color of highlighting). After phone became reset I checked my system and it was still 4.4.4 and still rooted. (that other zip if I had flashed it should have made me 4.4.2 I think).
At any rate, no big deal for me, I'll go ahead and upgrade to Lollipop latest version (including Stagefright fix) using the Flashfire method.
I guess I'm 99% certain the op's zip caused my reset but there's always the case I may be mistaken. If others reporto they have successfully flashed from the same place I started, the likelihood I was mistaken probably goes up.
@electricpete1
If you pay close attention to the pictures you posted, you will see that what you flashed was a Multi CSC update, the file I uploaded doesn't even deal with CSC.
Open my file and you will see that only stagefright libraries are included, not a single CSC file there.
Besides, the fix is intended for Lollipop and as far as I know I337UCUFNJ4 [4.4.4] is KitKat.
KitKat users: Please, don't even try to flash this fix!
@churapa Thanks, I guess I must have flashed the wrong file.
Sorry for posting bad info on your thread. I edited my posts above to "hide" the info to clean up the thread.
Thanks for your contributions to our community.
I just finished flashing to latest Lollipop with stagefright protection (I337USUGOC4), so it worked out fine for me.
Works great, thanks
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Will this patch work on S5 SM-G900A running android 5.0 OC4?
Didn't work for me :crying:
thereeladrian said:
Didn't work for me :crying:
Click to expand...
Click to collapse
If you compare that to my screenshot. That is a newer unpatchrd vulnerability. Probably the media server one
thereeladrian said:
Didn't work for me :crying:
Click to expand...
Click to collapse
The new reported CVE-2015-6602 vulnerability will need to be patched again by Google and then later by Samsung.
churapa said:
The new reported CVE-2015-6602 vulnerability will need to be patched again by Google and then later by Samsung.
Click to expand...
Click to collapse
will your patch then get updated sometime following that?
mr_horsepower said:
will your patch then get updated sometime following that?
Click to expand...
Click to collapse
If possible, yes.
Anyone know if the latest CVE-2015-6602 vulnerability has been patched yet for the US AT&T S4 (i337)? @churapa?
xdafan15 said:
Anyone know if the latest CVE-2015-6602 vulnerability has been patched yet for the US AT&T S4 (i337)? @churapa?
Click to expand...
Click to collapse
I'm not using my I337 anymore, sorry!
churapa said:
I'm not using my I337 anymore, sorry!
Click to expand...
Click to collapse
Just a few of us dinosaurs left, I guess.
Since I'm sure you know more about this than me, would you care to comment on whether you think the patch here would work on my i337 since this one was designed for the Rogers i337M? That one includes the newer patch.
Sorry for trying to drag you back here, @churapa.
xdafan15 said:
Just a few of us dinosaurs left, I guess.
Since I'm sure you know more about this than me, would you care to comment on whether you think the patch here would work on my i337 since this one was designed for the Rogers i337M? That one includes the newer patch.
Sorry for trying to drag you back here, @churapa.
Click to expand...
Click to collapse
Try the attached zip file at your own risk.
Thanks a lot!
churapa said:
Try the attached zip file at your own risk.
Click to expand...
Click to collapse
Thanks for keeping this up to date. It did not work, however, and might be my fault?
I am on OC4, using OD7 Build of GE 53 on ATT S4 i337. The first patch in OP worked and got it all fixed except 6602. Should I try with clearing cache or something? Thanks folks!
***Btw, I am flashing this with using NC1 Flasher, then after updating 6606 .zip via SS, I flash OC4 kernel again*** Is this a problem?
Related
And it started.
http://www.androidpolice.com/2013/0...e-play-edition-samsung-galaxy-s4-and-htc-one/
Probably a dumb question, but anybody know a way to force the update? I'd really like to get my phone to 100% stock, official 4.3 firmware.
I wonder how long it takes until there is a pre-rooted flashable ROM available. So glad they are updating this phone quickly.
pauleandro said:
And it started.
http://www.androidpolice.com/2013/0...e-play-edition-samsung-galaxy-s4-and-htc-one/
Click to expand...
Click to collapse
illogic6 said:
Probably a dumb question, but anybody know a way to force the update? I'd really like to get my phone to 100% stock, official 4.3 firmware.
Click to expand...
Click to collapse
I used the trick of clearing Google Application Framework. Worked like a charm! I'm pulling the OTA file now before I update.
Try to pull the zip file if you can. I think you can flash it with the stock recovery.
So I got the update OTA on my T-Mobile GS4 running the rom from this thread.
Anyone know what will happen if I update? I don't know if I'll lose root, recovery, etc.
Sirchuk said:
So I got the update OTA on my T-Mobile GS4 running the rom from this thread.
Anyone know what will happen if I update? I don't know if I'll lose root, recovery, etc.
Click to expand...
Click to collapse
If you could upload it to Mega, many of us would appreciate it.
illogic6 said:
If you could upload it to Mega, many of us would appreciate it.
Click to expand...
Click to collapse
Where would the update be stored on the phone? I doubt it's somewhere easy like Download..
Sirchuk said:
Where would the update be stored on the phone? I doubt it's somewhere easy like Download..
Click to expand...
Click to collapse
A quick google seems to point to /cache being its location.
tublah said:
I used the trick of clearing Google Application Framework. Worked like a charm! I'm pulling the OTA file now before I update.
Click to expand...
Click to collapse
didn't work for me.
illogic6 said:
If you could upload it to Mega, many of us would appreciate it.
Click to expand...
Click to collapse
I've pulled the OTA file and am uploading to MEGA right now.
illogic6 said:
A quick google seems to point to /cache being its location.
Click to expand...
Click to collapse
I'm a noob when it comes to using command line. I checked the /cache folder after logging into to SU. But not sure where to go from there.
list shows:
lost+found
recovery
and there doesn't appear to be anything in the recovery folder, and not this is in lost+found:
#117121
?! No idea.
---------- Post added at 07:30 PM ---------- Previous post was at 07:29 PM ----------
tublah said:
I've pulled the OTA file and am uploading to MEGA right now.
Click to expand...
Click to collapse
Glad to hear it! I'll stop trying now before I break something..
4.3 OTA Zip
Here ya go, hot off the presses! https://mega.co.nz/#!F8A12Tra!AuV23h8onysSyzp45M4UZgwORUZNMd1ZeU9CWLV2X6Q
So can this be flashed over top of the current GE ROMs ?
scarmon25 said:
So can this be flashed over top of the current GE ROMs ?
Click to expand...
Click to collapse
I am on a Google Edition I9505G, I reverted back to stock recovery and was able to flash this just fine. Your mileage may vary if you do not have a GT-I9505G. It may turn your device into a lawnmower...I just dunno.
I'll inspect when I get home. The ATT and I9505 are pretty much the same. I've been running I9505 GE ROM without issue for a bit while. If its just a kernel and system update then it should be fine. We will see shortly.
Can you still get the OTA if you are rooted? I've cleared Google Service Framework but I'm still not getting it.
Haven't noticed it mentioned on any websites yet, but a notable change is with cover view, we reverted from thin font time to Google favored fat hours & skinny minutes. Yuck.
Sent from my GT-I9505G using xda premium
hmm don't have the balls to put this on my i9505 someone go first
I did, works fine
Q&A for [ROM][D850][BETA] CyanogenMod 12 OFFICIAL Nightlies 5.0 Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][D850][BETA] CyanogenMod 12 UNOFFICIAL Nightlies 5.0 Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
all flashed and working fine
wifi fine first boot took around 45secs
thanks op
Someone is bound to ask
Just wondering since I'm sure several Canadians are following your thread. Will this work on out D852 models up here in Canada or is this just for AT&T Variants.
anyone struggling to get roots access? titanium isnt seeing it and supersu doesnt seem to update binary
EDIT: found the solution, just me being incompetent
Does the camera work at all? That's the only thing Stopping me from flashing
Working just fine on mine
SmokeyTech1 said:
Does the camera work at all? That's the only thing Stopping me from flashing
Click to expand...
Click to collapse
Here are the issues I've noticed thus far:
- Root access broken (the listed solution of flashing the 2.2.4 beta of SuperSU through TWRP is no longer viable as the link has been taken down by Chainfire due to numerous issues)
- The dialer crashes when attempting to import contacts
- The usual Bluetooth and WiFi tethering issues as in previous CM builds
- The camera periodically drops its connection
Other than the expected bugs, this new build of Cyanogenmod is smooth, and given some time and improvement, can definitely become a daily driver. Great job!
I obtained root by flashing BETA su 2.23
2SHAYNEZ
shayneflashindaily said:
I obtained root by flashing BETA su 2.23
2SHAYNEZ
Click to expand...
Click to collapse
I can't find a link. Do you have one?
grumpyrussian said:
I can't find a link. Do you have one?
Click to expand...
Click to collapse
in the Beta SuperSU thread someone posted a link to 2.23 a couple pages back, but 2.25 was just posted by Chainfire...
Noticed that:
NFC doesn't work - try to toggle it and it greys out until the screen locks, once unlocked it is available to try enabling again..was excited to try tap n go..oh well
Icons look small. Is anyone else experiencing this?
krazyflipj said:
Icons look small. Is anyone else experiencing this?
Click to expand...
Click to collapse
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
rawsushi said:
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
Click to expand...
Click to collapse
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
*EDIT* Went with 560. 640 seemed too big
krazyflipj said:
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
Click to expand...
Click to collapse
Cool. So you're saying it's working so far? Or did you not try it out yet?
rawsushi said:
Cool. So you're saying it's working so far? Or did you not try it out yet?
Click to expand...
Click to collapse
So far so good.
rawsushi said:
Yes. Looks like the DPI was altered. Anyone know of a good way to fix this? I've tried a couple of different apps and neither one of them worked.
Click to expand...
Click to collapse
You have to edit the build.prop and then reboot
ro.sf.lcd_density=480 (Stock is 640)
---------- Post added at 12:44 PM ---------- Previous post was at 12:42 PM ----------
krazyflipj said:
Fixed. I edited build prop to 640 (Stock) Let's see if it breaks anything
Click to expand...
Click to collapse
What he said
Does xPosed Framework work with L5.0 CM12?
jinxzn said:
Does xPosed Framework work with L5.0 CM12?
Click to expand...
Click to collapse
No. Exposed doesn't work with lolipop
Got it. Thank you guys for the tip. Looks perfect now. So far no issues here either.
I don't know if the VZW S5 dev community has realized, but Aroma now works on FF. I'm going to work on adding aroma into my ROM, and hopefully other devs can add it as well
Nandr0idC0nsumer said:
I don't know if the VZW S5 dev community has realized, but Aroma now works on FF. I'm going to work on adding aroma into my ROM, and hopefully other devs can add it as well
Click to expand...
Click to collapse
Let me know if it works or how far you get and I will try one too. Do you have one in mind to try?
ProudMarine said:
Let me know if it works or how far you get and I will try one too. Do you have one in mind to try?
Click to expand...
Click to collapse
No if you could try an aroma rom for another device that would be gr8
Nandr0idC0nsumer said:
No if you could try an aroma rom for another device that would be gr8
Click to expand...
Click to collapse
Please tell me what phone carrier is compatible to ours.
ProudMarine said:
Please tell me what phone carrier is compatible to ours.
Click to expand...
Click to collapse
Sprint
Or U.S. Cellular
it doesn't matter if the rom actually works, we just need to know if the aroma installer comes up
Thank you this is great news. I wonder though if this is going to work with the international patch in some way? That is all that has stopped me from figuring it out is the flashfire aroma issue.
---------- Post added at 10:32 AM ---------- Previous post was at 10:30 AM ----------
Nandr0idC0nsumer said:
Sprint
Or U.S. Cellular
it doesn't matter if the rom actually works, we just need to know if the aroma installer comes up
Click to expand...
Click to collapse
I have flashed Tmo roms and they were fine with the international patch. Of course these were ones without aroma at the time.
Nandr0idC0nsumer said:
Sprint
Or U.S. Cellular
it doesn't matter if the rom actually works, we just need to know if the aroma installer comes up
Click to expand...
Click to collapse
I downloaded one from T-mobile with carrier unlock the rom maker said it would work on VZW too. so I am going to install FF v.19 and give it a try.
here is @tp2215 's rom link that i am downloading from. http://forum.xda-developers.com/showthread.php?t=2723915
Edit 1: installing now time: 13:54 est time 13:58 est ff loaded all the white linex then went to a black screen so restarting the phone from pulling battery and restarting the phone now.
Edit 2: reloaded phone normally just fine. No new rom no restore ether. it just loaded with what ever my wife already had on the phone
What?!?!? No way. I thought that it couldn't work because the rom didnt let it access the framebuffer. I'm stoked.
blair.sadewitz said:
What?!?!? No way. I thought that it couldn't work because the rom didnt let it access the framebuffer. I'm stoked.
Click to expand...
Click to collapse
according to the flashfire fourm thread, yes it should work
That just made me wonder what else you could do with this beast. Could you have it load an X server? Lol.
Nandr0idC0nsumer said:
according to the flashfire fourm thread, yes it should work
Click to expand...
Click to collapse
Sorry guys it dont work
I gotta read up on it. Is flashfire its own operating system? That is a serious question
---------- Post added at 05:57 PM ---------- Previous post was at 05:57 PM ----------
Didnt think so
blair.sadewitz said:
That just made me wonder what else you could do with this beast. Could you have it load an X server? Lol.
Click to expand...
Click to collapse
maybe we could even run chrome without lag
EDIT: nevermind. That's impossible.
jrkruse said:
Sorry guys it dont work
Click to expand...
Click to collapse
Aww man. I saw on the official ff fourm it said it worked
Gonna remove this thread now.
It works on some devices just not ours. I even triedthe latest aroma installer test zip and it just froze up on both flashfire and safestrap
jrkruse said:
It works on some devices just not ours. I even triedthe latest aroma installer test zip and it just froze up on both flashfire and safestrap
Click to expand...
Click to collapse
hmmm. trying to think of another way to make a customizable rom installer.
Nandr0idC0nsumer said:
hmmm. trying to think of another way to make a customizable rom installer.
Click to expand...
Click to collapse
What we need is a recovery that uses VNC for video, lol. Well, I'm kinda serious. But not really.
blair.sadewitz said:
What we need is a recovery that uses VNC for video, lol. Well, I'm kinda serious. But not really.
Click to expand...
Click to collapse
The closest we come is having a barebones rom with flashable zips for options.
Try this ROM with the international rom patch.
https://www.androidfilehost.com/?fid=23991606952599297
Despite all the macabre artwork, after you get past the boot animation what is impressive is how well it's put together. Seriously. Maybe it's just me, but I don't think so.
blair.sadewitz said:
Try this ROM with the international rom patch.
https://www.androidfilehost.com/?fid=23991606952599297
Despite all the macabre artwork, after you get past the boot animation what is impressive is how well it's put together. Seriously. Maybe it's just me, but I don't think so.
Click to expand...
Click to collapse
Its a nice rom. I tried to do a port to Verizon but the OP would never give me permission
Hi everyone, I'm going to post a separate thread about this. None other than @jrkruse has once again made us a stock modified rom for the Verizon galaxy S5. Lets go over the basics shall we?
IMPORTANT INFORMATION
You MUST have an unlocked bootloader in order for root to work!(Or you may/probably will bootloop your phone)
This rom uses an updated bootloader, but it is not needed, you may flash this over the PD1 and PF4 bootloader!
If you wish to update your bootloader or need to unlock, please goto my thread
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Features
DEODEXED
Knox Removed!
Amazon Bloat Removed
Verizon Bloat Removed
Rooted!
Hotspot Fix!
Installation
Please read everything Above before continuing
Well you continued so I assume you understand what you are doing
One last time, you MUST HAVE AN UNLOCKED BOOTLOADER TO FLASH
You also MUST BE ON PD1+ Bootloaders!
You need to download the ROM from here
https://www.androidfilehost.com/?fid=312968873555004789
Flash it inside TWRP or Flashfire or Safestrap(Or whatever method you may be using to flash roms)
I recommend against Dirty flashing however if you are coming from a 6.0.1 ROM you probably are fine
Wipe Cache/Dalvik
Reboot!
You should be done!
Extras
If you would like xposed, this framework should work
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Thanks to @wanam and @rovo89
SuperUser Provided by @Chainfire (I Assume lol)
Screen overlay issues can be corrected by this
http://forum.xda-developers.com/attachment.php?attachmentid=3910855&d=1477064365
Useless Info
Pokemon go won't work, get over it!
Android Pay also won't work!
Really Beta Stuff
If you wish to try and play Pokemon Go or use android pay, the following may work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
You CANNOT use xposed unless you use a systemless xposed compiled for our Samsung devices @wanam usually does a good job at that)
Expect bootlooping or problems!
Reserved Cuz
@jrkruse Did I mess anything up? I'm on my phone and rushing and busy
GeTex said:
Reserved Cuz
@jrkruse Did I mess anything up? I'm on my phone and rushing and busy
Click to expand...
Click to collapse
Nope maybe just mention it has the hotspot fix
hi
I'm using Resurrection Remix rom now with PB1_Bootloader .
Do I need go back to PB1 rom and update my bootloader to flash This rom?
Normally no bootloader does not need to be updated
Sent from my SM-G900V using Tapatalk
---------- Post added at 04:32 PM ---------- Previous post was at 04:32 PM ----------
I have run a kitkat bootloader on mm rom before
Sent from my SM-G900V using Tapatalk
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
well ..... i flashed This rom and i stuck in samsung logo for 1 minute and mobile boot again to TWRP Recovery.
do i need to MM Kernel?
sjla said:
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
Click to expand...
Click to collapse
I said it because yes, you have to, if you don't hard keys and wifi will not work
theres a difference between running a MM rom on a Kitkat bootloader and running a STOCK SAMSUNG MM ROM on a kitkat bootloader
custom roms don't care as much, but stock do
Well forget what I said refer to the wisdom of the ROM developers I'm just a noob flasher
Sent from my SM-G900F using Tapatalk
sjla said:
"You also MUST BE ON PD1+ Bootloaders"
That's what @GeTex said And put a link to update Bootloader That's why I asked this question
Thanks
ـــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ
well ..... i flashed This rom and i stuck in samsung logo for 1 minute and mobile boot again to TWRP Recovery.
do i need to MM Kernel?
Click to expand...
Click to collapse
i was on remix also and flashed the rom and end it didnt get pass the samsung logo, but i followed the steps at the end of method 1 here and it worked.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
mike2550 said:
i was on remix also and flashed the rom and end it didnt get pass the samsung logo, but i followed the steps at the end of method 1 here and it worked.
http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
Click to expand...
Click to collapse
Thanks
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
drewcu said:
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
Click to expand...
Click to collapse
I don't know for sure, but my bet is it because the programs check something for security/anticheat reasons, and since we are rooted and unlocked it fails and won't work. That's just a guess though.
Sent from my SM-G900V using Tapatalk
Pokemon go uses safetynet api that checks for root
Sent from my SM-G900F using Tapatalk
Kaliaila said:
I don't know for sure, but my bet is it because the programs check something for security/anticheat reasons, and since we are rooted and unlocked it fails and won't work. That's just a guess though.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Wasn't sure if it had something to do with the fact that some of the bloatware was removed or what you are saying. I am on rooted, deodexed, modded PF4 already but never tried either app so for all I know I cannot use them already on my current ROM.
EDIT: And now I see what happens on PF4 with Samsung Pay. The app cannot verify the Android software when adding a card, rendering Android Pay useless. Oh well.
I am having screen overlay detected issue with GravityBox but the rom awesome .
Thank you @GeTex
One last thing can you Please remove verizon screen
sjla said:
I am having screen overlay detected issue with GravityBox but the rom awesome .
Thank you @GeTex
One last thing can you Please remove verizon screen
Click to expand...
Click to collapse
Try this and see if it works for screen overlay
View attachment Fixed_Google_Package_Installer.zip
drewcu said:
Any reason the Android Pay and Pokemon Go apps don't work with this ROM? I don't plan on playing Pokemon Go but might use Android Pay and just curious.
Click to expand...
Click to collapse
This will allow android pay to work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
jrkruse said:
This will allow android pay to work
http://forum.xda-developers.com/apps/supersu/suhide-t3450396
Click to expand...
Click to collapse
Last I checked SuHide was a bit of a disaster and had alot of issues(especially for xposed users since I'm not aware of a systemless xposed version for our Special Samsung ART runtime and atop that, I thought it bootlooped my S5 during testing.
GeTex said:
Last I checked SuHide was a bit of a disaster and had alot of issues(especially for xposed users since I'm not aware of a systemless xposed version for our Special Samsung ART runtime and atop that, I thought it bootlooped my S5 during testing.
Click to expand...
Click to collapse
I use it on s7 and it works fine but I don't use xposed. I used an earlier version on s5 and it worked but then again I didn't use xposed framework. So I guess the best would be just read through the suhide thread and see if latest versions work with xposed. By the way I meant to ask earlier, how is everything going. Good I hope. Thanks for posting rom
jrkruse said:
I use it on s7 and it works fine but I don't use xposed. I used an earlier version on s5 and it worked but then again I didn't use xposed framework. So I guess the best would be just read through the suhide thread and see if latest versions work with xposed. By the way I meant to ask earlier, how is everything going. Good I hope. Thanks for posting rom
Click to expand...
Click to collapse
Things are a bit of mayhem, stuff not working, computers breaking, limited internet. Always something. Anyhow, @Chainfire said it doesn't work with xposed, only systemless
Here is the screenshoot from my Galaxy S8.
Swichted from G950U1 to G950U with Modded Odin.
If you do like this then you need 3 update file.
1. CRK1 Update (Search on sammobile)
2. CRL Update (https://firmware.science/)
3. DRL6 update (https://firmware.science/)
For original guides; https://www.xda-developers.com/samsung-galaxy-s8-install-one-ui-android-pie-beta/
How is this leaked software running on your device? Found many bugs yet?
Creedo4Life said:
How is this leaked software running on your device? Found many bugs yet?
Click to expand...
Click to collapse
Still I'dont get any bugs or random reboot or etc. Everything working perfectly. One thing is, software update is not working. Just show "This version is not supported".
Edit 1. Always On Display is not working at version 4.1.37
Edit 2. Working after reboot!
Creedo4Life said:
How is this leaked software running on your device? Found many bugs yet?
Click to expand...
Click to collapse
You may have to update some Samsung apps for them to work. Also, night mode doesn't fully work (some Samsung apps not included in it). Also, much faster and smoother; however, slightly faster battery drain for me. All the new software is a plus though. The important bugs are similar to bugs on official betas for s9.
anarasgarli said:
Still I'dont get any bugs or random reboot or etc. Everything working perfectly. One thing is, software update is not working. Just show "This version is not supported".
Edit 1. Always On Display is not working at version 4.1.37
Edit 2. Working after reboot!
Click to expand...
Click to collapse
XtremeCoder109 said:
You may have to update some Samsung apps for them to work. Also, night mode doesn't fully work (some Samsung apps not included in it). Also, much faster and smoother; however, slightly faster battery drain for me. All the new software is a plus though. The important bugs are similar to bugs on official betas for s9.
Click to expand...
Click to collapse
Thanks for the update. I will probably wait and stay on Oreo for now, but I will admit, my fingers are itching and I'm very tempted to give this leak a try. Then the part of my brain ? that handles logic and common sense kicks in again and tell me to wait. :laugh:
My wifi is connecting but not transferring any data. Any ideas?
TheE1337 said:
My wifi is connecting but not transferring any data. Any ideas?
Click to expand...
Click to collapse
Just try to clear cache from boot.
Also, tonight my phone suddenly get into the "Upload Mode". I don't know what's wrong with this but still working.
Creedo4Life said:
Thanks for the update. I will probably wait and stay on Oreo for now, but I will admit, my fingers are itching and I'm very tempted to give this leak a try. Then the part of my brain ? that handles logic and common sense kicks in again and tell me to wait. :laugh:
Click to expand...
Click to collapse
Yeah, One UI come with good feature but I also think about back to the stable oreo.
Wish it worked on the Sprint varient.
typow102 said:
Wish it worked on the Sprint varient.
Click to expand...
Click to collapse
It will be woking, but you need Multi CSC and Combination Files Bit 5 for changing CSC.
Any chance there will come a working version for exynos models? (G950F) ...
Hi, is there T-Mobile bloatware? Like boot screen and apps?
lukesvw said:
Hi, is there T-Mobile bloatware? Like boot screen and apps?
Click to expand...
Click to collapse
No, it's without bloatware.
Donald K. said:
Any chance there will come a working version for exynos models? (G950F) ...
Click to expand...
Click to collapse
Official S9 One UI update roll out, but still don't have any news about Exynos S8.
anarasgarli said:
No, it's without bloatware.
Click to expand...
Click to collapse
Thanks. Btw, is it possible to go back to oreo?
lukesvw said:
Thanks. Btw, is it possible to go back to oreo?
Click to expand...
Click to collapse
I think it's possible. Because bootloader bit (version ) is same.
Which file i need to be download
BigBrad75 said:
Im still on crc1 , what would I have to do to make this work? Galaxy s8 snapdragon us unlocked model
Click to expand...
Click to collapse
If anybody can help with some advice I'd greatly appreciate it!
Can anyone help me? Odin gives no errors codes it only says failed 1
I am on the SM-G950U1 and trying to flash update to CRK1
BigBrad75 said:
If anybody can help with some advice I'd greatly appreciate it!
Click to expand...
Click to collapse
I would suggest you using modded odin. I also had an unlocked snapdragon S8 US variant SMG950U1 as well and when I flashed the Odin files for CRK1 my device became a Verizon S8 model SMG950U...CRK1 (no longer unlocked but has bloatware). Once the base model is CRK1, you have to download 2 update.zip files. CRK1 to CRL1 and CRL1 to DRL6.
Follow the instructions from the link provided from OP on the first post.