5.1.1 For N910H Only
Hi Every one ... I'd Like to share my little experience on Installing Stock Rom 5.1.1 And Rooting + Custom Kernel
1- Download Odin3 v3.10.7
2 - Download 5.1.1 Firmware FOR N910H From Here , Extract it and Start Odin then select [ AP ] , select the extracted .md file
3- You must Select Nand Erease All From Odin options before flashing
4- Press start
5 - After Flashing and your phone starts normally continue with the setup wizard
6 - Download ( I Prefer ) TWRP 2.8.7.0 Custom Recovery twrp-2.8.7.0-treltexx.img.tar
7 - Flash the recovery with Odin again
8 - Restart your phone in Recovery mode
9 - install GoogyMax 2.0 Or Latest Talexop Kernel or Spacex Kernel
10 - Now your have offical stock rom 5.1.1 for N910H with fullroot with custom kernel ,
N910H Bootloader and modem Thanks for @liquidguru for sharing the link
Flashable Modems for 910H version Here - Flash in cwm or twrp recovery. No wipes needed
now you can flash other custom rom based on 5.1.1 like RulingLite or E-TEAM DN5
you can use 910c 5.1.1 kernels it also works on 910h i use it and it works
And maybe Enjoy flashable 300+ font HERE
I hope this was useful, i just collect what you needs in one place, thanks
Flash recovery + custom rom ( ie n910c ) + n910h bootloader.
If you want to use custom rom ( n910c rom without modem ).
No need to go through all those steps to get custom rom.
qvnsq said:
Flash recovery + custom rom ( ie n910c ) + n910h bootloader.
If you want to use custom rom ( n910c rom without modem ).
No need to go through all those steps to get custom rom.
Click to expand...
Click to collapse
Yes you right, Custom rom is not the target , installing 5.1.1 with rooting is the target
I List those steps for people searching for 5.1.1 for 910H and rooting and custom kernel and custom rom , Simply that's for beginners, put informations in one place, thanks for your tip
Another nice day isn't?
Thank you for the share keep it up and don't stop.
can someone please share n910h bootloader
qvnsq said:
Another nice day isn't?
Thank you for the share keep it up and don't stop.
Click to expand...
Click to collapse
Thank you... I will do
Deleted
Here is a link to an Odin flashable .tar file. Contains the N910H bootloader and modem. Exact the zip then flash through Odin
https://www.dropbox.com/s/nte05ydqyl5su9x/SM-N910H_WanamLite.OH4_BL_Modem.tar.zip?dl=0
I used it on my N910H after flashing Wanam 5.1.1 ROM.
sent from somewhere
i already flashed 5.1.1 without doing step 3 as i just wanted latest nonrooted stock. if i want to root now, do i have to reflash and do step 3?
hi and thanks
N910H bootloader & Modem link in OP not woking.
kindely if possible to upload
Hi All,
Nevermind...fixed
rajaib said:
hi and thanks
N910H bootloader & Modem link in OP not woking.
kindely if possible to upload
Click to expand...
Click to collapse
Please try this link. Let me know if any problems
https://www.dropbox.com/s/nte05ydqyl5su9x/SM-N910H_WanamLite.OH4_BL_Modem.tar.zip?dl=0
sent from somewhere
can someone tell me the function of bootloader. whats for that is? and why we should install that? and how to instal that?
tegarjr11s said:
can someone tell me the function of bootloader. whats for that is? and why we should install that? and how to instal that?
Click to expand...
Click to collapse
Function of bootloaders you can google it,
you should install the proper Bootloader for your phone version
you can install bootloader via Odin
download link of bootloader and Odin mentioned above in the OP
qvnsq said:
Flash recovery + custom rom ( ie n910c ) + n910h bootloader.
If you want to use custom rom ( n910c rom without modem ).
No need to go through all those steps to get custom rom.
Click to expand...
Click to collapse
Maystro said:
Function of bootloaders you can google it,
you should install the proper Bootloader for your phone version
you can install bootloader via Odin
download link of bootloader and Odin mentioned above in the OP
Click to expand...
Click to collapse
my version is N910H same like you. if i want to flash the custom rom from stock 5.1.1 ? what should I install the bootloader?
EDIT: Nevermind. Fixed my issue.
liquidguru said:
Here is a link to an Odin flashable .tar file. Contains the N910H bootloader and modem. Exact the zip then flash through Odin
https://www.dropbox.com/s/nte05ydqyl5su9x/SM-N910H_WanamLite.OH4_BL_Modem.tar.zip?dl=0
I used it on my N910H after flashing Wanam 5.1.1 ROM.
sent from somewhere
Click to expand...
Click to collapse
Can you please provide 5.0.1 bootloader? Thanks
tegarjr11s said:
my version is N910H same like you. if i want to flash the custom rom from stock 5.1.1 ? what should I install the bootloader?
Click to expand...
Click to collapse
after flashing 5.1.1 Stock Rom , flash the recovery as i mentioned in OP using ODIN too, then u can flash any custom ROM even from n910c
but in case of 910c you should flash n910H modem and also you have the link in OP
by the way i test to use 5.0.x n910h modem with 5.1.1 and it works
djunited said:
i already flashed 5.1.1 without doing step 3 as i just wanted latest nonrooted stock. if i want to root now, do i have to reflash and do step 3?
Click to expand...
Click to collapse
no just start from step 6 direct
djunited said:
i already flashed 5.1.1 without doing step 3 as i just wanted latest nonrooted stock. if i want to root now, do i have to reflash and do step 3?
Click to expand...
Click to collapse
No, you don't need to reflash rom. Start from step 6
---------- Post added at 03:44 PM ---------- Previous post was at 03:29 PM ----------
Maystro said:
after flashing 5.1.1 Stock Rom , flash the recovery as i mentioned in OP using ODIN too, then u can flash any custom ROM even from n910c
but in case of 910c you should flash n910H modem and also you have the link in OP
by the way i test to use 5.0.x n910h modem with 5.1.1 and it works
Click to expand...
Click to collapse
Maystro be aware that if the custom ROM they are referring is a 5.0.x, they may have to reflash a stock 5.0.1 ROM or bootloader to make it work. Users are having problems reversing from 5.1.1 to 5.0.x because of bootloaders.
Related
THIS IS A COMPLETE NOOB FRIENDLY GUIDE FOR FLASHING BOOTLOADERS,MODEMS/BASEBAND.
Requirements :
A PC
USB 3.0 DATA CABLE (2.0 SHOULD WORK TOO)
ODIN 3.07 0R 3.09
NOTE3
ALSO PATIENCE
INSTRUCTIONS
NORMAL METHOD
1.Power off your phone ( Don't Restart)
2.Press Power + Volume Down + Home buttons until you see download mode .
3. Attach it your PC and open ODIN 3.07 OR 3.09
4. Select AP/PDA and ADD your .tar file or .bin file
5. START
6.It will restart itself .
Go to Settings>> About Device >> and Check Your baseband/bootloader has changed or not.
If not start the procedure again . I did it twice to make it work.
Click to expand...
Click to collapse
Always make sure KIES is disabled ... sometimes it has been known that KIES interferes with ODIN.
KHIZAR'S METHOD
If the above procedure does not work for you try this method .
1.Go to download mode from your OS restart menu,
2.Attach your phone to your PC.Let it detect your phone in download mode first.
3.Open ODIN 3.07 OR 3.09
4.SELECT AP/PDA and ADD your .tar file or .bin file.
5.Untick AutoReboot and Start
6.Then reboot manually into download mode without booting into the rom.
7.Then flash the modem/bootloader again.
8.Now power off the phone and then manually boot into your OS.
9.Check in About if baseband/bootloader has changed.
Click to expand...
Click to collapse
TRIANGLEAWAY METHOD
If the above solutions still did not work for you ...
1.If your phone is rooted , Use Triangleaway to reset your binary counter and make it fully stock.
2.Flash stock firmware using ODIN 3.07/3.09
3.Check to see if your baseband/bootloader has changed
Link to Triangleaway Below
LINK
Click to expand...
Click to collapse
NOTE : For Flashing Modems you can use CP/PHONE in odin too.
For users who do not know how to flash stock please follow this great and easy guide
LINK
Nice. Let's hope this does help users like we thought it would..
Edit- My method isn't right. You flash the first time and then manually reboot into download mode then flash the second time.
Sent From My SM-N9005 To All You Wonder Nobodies!!
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
ibraahim said:
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
Click to expand...
Click to collapse
You don't need to be rooted. And I don't think knox will be tripped since you aren't flashing anything that's been modified, only flashing unsigned/modified images via Odin trips knox. But since you are flazing a signed modem you should be fine.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
wijnkuip said:
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
Click to expand...
Click to collapse
1. No need. Just follow the guide, nothing more..
2. Check the modem thread that's in the general section, if you can't find it there then you may have to pull it from the stock FW. Also some roms devs have the modem in their OTA/OP so may wanna check there as well.
3. New isn't always better. Update if you have issues, if something isn't broken then there is no need to fix it.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Downgrade from 4.4.2 to 4.3 on N9005
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Addymore said:
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Click to expand...
Click to collapse
Like it's been mentioned everywhere it's NOT possible to downgrade from KK BL to JB BL on the N9005...
Sent From My SM-N9005 To All You Wonder Nobodies!!
with the current modem/firmware/bootloader (I don't know what gives me the issue) I cannot use LTE while I have an SM-N9005 and friend of mine with unrooted Note 3 (bought in a shop in our country) has LTE 4g, while I have an Italian CSC.
If I use a modem from an other rom, will I have LTE as well and still have my Knox intact?
Thanks a lot guys
Your threat was a live saver man. For a sec I thought I lost my phone. Flashed modems b 4 but thanks to u I got reminded to use the new Odin(stupid me used the old one).
z3x baseband
Just a quick question , im about to buy a z3x box I was wondering if it repairs baseband s/n and imei on n9005 my phone reads null/null imei unknown baseband and a wild serial number, many thanks
4.3 Modem on kitkat
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
MuhammadZeeshan7 said:
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
Click to expand...
Click to collapse
You cannot go back to old bootloader once you are on KitKat, try flashing a new firmware.....
My phone currently is running the KOT49H.N9005DXUGNH1 rom, but i have a need to flash the N900XXUDNC1 modem. Can I do that?
nice one thanks
@fahadali2315 a suggestion from my side, why don't you include this link for latest bootloaders - https://www.androidfilehost.com/?w=files&flid=12697
and this link for latest modems - http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Lyon888 said:
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Click to expand...
Click to collapse
Are you Flashing the Full Firmware to update the bootloader?
Are you Flashing the Correct Firmware for your Carrier and Device?
Your Device is in Download Mode?
USB Debugging is enabled?
You Have the Samsung Drivers installed on your pc?
If the answers to the above is Yes - Try a different USB cable and Port on your pc
Sent From my SM-N910W8 using Tapatalk
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Lyon888 said:
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Click to expand...
Click to collapse
I'd personally flash the full Firmware - Benefits... Updated bootloader - Updated Modem & Any associated "fixes".
Sent From my SM-N910W8 using Tapatalk
Hi,
I am running Aurora Rom v6 on GS4 i9500 based on lollipop 5.0.1. I have been reading a lot about upgrading modem and bootloader. So first of all i would like to know is it really needed to update your bootloader or modem, if yes then how should i do it ? Do i need to just flash the files via odin in PDA mode or some other mode need to be selected ? Also does it require full wiping your cache dalvik cache ?
Here is my current modem number I9500DDUHOA1.
I am not sure how do i find out which bootloader i am running.
Thanks !!
Can anyone please reply !!
rbhanot2 said:
Can anyone please reply !!
Click to expand...
Click to collapse
Your device's modem/bootloader version is up-to-date. Modem + BL is included in the stock firmware and you already had installed the latest stock firmware for your region (I9500XXUHOAA - INU) before you switched to a custom rom.
Hey guys,
I'm a bit confused on how to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.
What confuses and scares me is the warning about the bootloader and modem...
Anyone did go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
Help would be appreciated, I'm too used to the easy flashing of nexus devices
flash stock 5.1.1 , flash twrp through odin (take from their website to your device),**** flash unikernel I think for root access ****, and then flash xtrestolite from twrp.
**** = maybe not needed, but just in case
creambyemute said:
Hey guys,
I'm a bit confused on how to flash the above mentioned rom as I'm still on 5.0.2 even though the update is actually already out.
What confuses and scares me is the warning about the bootloader and modem...
Anyone did go from 5.0.2 to 5.1.1 and flash xtrestolite as rom?
Help would be appreciated, I'm too used to the easy flashing of nexus devices
Click to expand...
Click to collapse
Everything is actually mentioned in his thread. Read it and ask if you have more questions.
But short. Flash 5.1.1 bootloader and modem, flash 5.1.1 stock, flash twrp, install XtreStoLite.
Faspaiso said:
Everything is actually mentioned in his thread. Read it and ask if you have more questions.
But short. Flash 5.1.1 bootloader and modem, flash 5.1.1 stock, flash twrp, install XtreStoLite.
Click to expand...
Click to collapse
Why would we flash the bootloader and modem first? Wouldn't the 5.1.1. stock include it all?
is350 said:
Why would we flash the bootloader and modem first? Wouldn't the 5.1.1. stock include it all?
Click to expand...
Click to collapse
I have absolutely no idea. I couldn't get on 5.1.1 before that, but I may have different something wrong. But it can't hurt, to do the above.
Judy follow the instructions on the thread.
Hey guys i have a problem with 5.1.1 and twrp 2.8.7.1: when i reboot in recovery i can't see my phone in windows explorer and i'm unable to copy the rom on the phone. Do you have the same issue?
This is what is installed on my device: TWRP 3.0.2-3 / android 6.01 (I THINK it's a bit modified rom) / SM-G930FD
I rooted asap I bought it few years ago, I want to update to the latest Nougat version 7.0.0 (I think the 7.1.2 is not officially released, right?)
All I need is stock (slightly modified is also ok) + root and don't mind formatting it to start from the scratch.
What are my options and/or what should I do? Thanks for reading!
Flash the latest stock ROM with Odin, then root.
audit13 said:
Flash the latest stock ROM with Odin, then root.
Click to expand...
Click to collapse
Thanks for the reply.
Can't the TWRP do the same thing? If I flash using the Odin, will I lose the TWRP?
You need to use Odin to flash a stock ROM which will cause you to lose root and twrp.
audit13 said:
You need to use Odin to flash a stock ROM which will cause you to lose root and twrp.
Click to expand...
Click to collapse
Thanks.
Could you tell me which ones should I use? What do you think about the smartswtich?
https://www.sammobile.com/firmwares/
https://updato.com
I recommend matching the ROM to the original carrier.
audit13 said:
I recommend matching the ROM to the original carrier.
Click to expand...
Click to collapse
It's an international unlocked version, does it have a "carrier"? How do I find it? I'm located in Japan and imported this phone.
You can install the Samsung Phone Info app from the Play Store to find out the csc and match that to the ROM.
Hello everyone
I tried to flash the Batman 1.5.0 rom and the Lineage 14 rom in my s7 G930F but i only can get a valid imei when i use a stock rom.
I used the batman rom for like 2 months and everything worked fine but now i cant use a costum rom anymore!
Does anyone knows how to fix this issue? Ty a lot
Cant flash to older versions. Grab the latest stock and flash yo get it back.
Wait for custom to be updated with even newer base then flash it
Saggy2121 said:
Cant flash to older versions. Grab the latest stock and flash yo get it back.
Wait for custom to be updated with even newer base then flash it
Click to expand...
Click to collapse
Ok i'll try it ty
Did it work?
Simple
Fixed!!!!
FIRST!!
1. FLASH BL AND CP from the stock firmaware!!
2. go to recovery and flash BATMAN ROM or another costum rom
3. When you install Batman rom just choose : KEEP CURENT MODEM AND BOOTLOADER!!! If you update that 2, the imei and the signal from the phone not working anymore.!!!
4. Just be sure again, flash BL and CP first from the stock rom! And keep the bootloader and modem don,t update from another rom!!!
Saggy2121 said:
Did it work?
Click to expand...
Click to collapse
I'll try it
alexyn19 said:
Fixed!!!!
FIRST!!
1. FLASH BL AND CP from the stock firmaware!!
2. go to recovery and flash BATMAN ROM or another costum rom
3. When you install Batman rom just choose : KEEP CURENT MODEM AND BOOTLOADER!!! If you update that 2, the imei and the signal from the phone not working anymore.!!!
4. Just be sure again, flash BL and CP first from the stock rom! And keep the bootloader and modem don,t update from another rom!!!
Click to expand...
Click to collapse
Thank you a lot i'll try it
ALWAYS backup your EFS folder, no matter what phone u have., and then save it on ur PC.
https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
This link solves most ppl with IMEI problems.