good day,
i have a Nvidia Shield Tablet, non rooted, not unlocked, stock ROM, updated via OTA only and its included in the RMA.
so i was cleaning a bunch of files first then i did a factory reset on the tablet but after rebooting after the Nvidia logo, it just got stuck on a blank screen.
how can i go about this? i wanted to give this to my child once i got the new tablet.
if any kind sir can point me to do a recovery OS and its rom file that would be very helpful.
thank you
Did you already receive the replacement? If you did and you used it already, you are hooped. Your old one has been deactivated
Just force reboot the tablet with the Power button, and you will be fine. But why would you give your child a tablet that could possibly explode??
Phen0m said:
Just force reboot the tablet with the Power button, and you will be fine. But why would you give your child a tablet that could possibly explode??
Click to expand...
Click to collapse
I was wondering the same thing...
will it really explode? i thought it will just die down?
yesterday we decided we will just use it during drumming session. mounted on a tablet holder
i waited 15 mins from the blank screen and eventually the android animation for the factory reset showed up.
Related
Hi everyone, I'm a new member to the forum, but have been a follower for quite some time.
Let's start by introducing my device wich is:
EEEPad Transformer TF101G with ICS running the latest 9.2.2.6 firmware.
The device is rooted and running ASUS stock recovery.
Everything was working fine until I decided to do a Cold Boot.
It got stuck on the cold boot menu for like 3 hours and I decided to turn it off.
After that it got stuck on the inicial Asus splash screen. I forced it to turn off a couple a times and it eventually booted up.
I knew something wasn't right, so I backed up all my files and applications.
Then decided to do a factory reset through POWER + VOL-
After that it never booted again, and after a few seconds on the splash screen I hear a click noise, like the hard drive is turning off.
When I try force it to turn off, it starts up again automatically.
I've tried to flash it through nvflash, but being a TF101G it also means it is sbkv3, wich is not supported by nvflash.
Also tried boot recovery tools, but it won't even start, because as I try to connect it to the computer through adb mode, after that "click" noise, the device becomes disconnected.
I didn't try any dangerous applications and stuff like that, just decided to do a simple cold boot, the device is a week old.
If I'm posting this in the wrong section I apologize.
And hope someone can come up with a good idea.
Thanks in advance.
You should ask HERE you will surly find an answer.
Good luck :good:
Sorry for the mistake
A few minutes after my post here I realized my mistake.
I've already created a new thread in the right section.
Thank you.
Dear guys and girls,
I have a problem. Since 2 days my tf300t is for some reason not starting up anymore. The start screen does not go away. Before it worked like a charm. I have tried almost everything, I can think of. As far as I know the latest firmware is installed. The problem is also that the tablet isn't in developer mode. So my options are limited afaik to fastboot. I have installed the naked drivers version 0.73. But windows is saying that the device is not started. Only fastboot is started as device. I have tried to reinstall the firmware by usb, but to no avail. It sends but doesn't write... I have drained the battery to zero level. Can anyone help me with this? What am I missing?
<>< A Dieu
Jaco Oversluizen
I'm also having this same issue. Tablet was working fine and then froze up. After rebooting we are now stuck on the Asus screen with the circular logo going. Waited over an hour with no change. Tried to boot into recovery and recovery crashes and gives me Error! This is a stock tablet that hasn't been unlocked or anything.
Update: Did a Data Wipe and the device rebooted and came up. Doing all the updates again. Hopefully it wont mess up again.
So you have an unlocked bootloader ?
I have an original Nvidia tablet which hasn't been killed by the kill switch yet. So I unlocked the bootloader, installed TWRP into recovery and installed Lineage and some other ROMs. But all ROMs are stuck in the boot process when it shows the NVIDIA logo. Any ideas what could be wrong? Did I miss something for the installation process?
First boot can take ~10min, how long did you wait?
pietras83 said:
First boot can take ~10min, how long did you wait?
Click to expand...
Click to collapse
I was waiting more than 10 minutes. I guess it must be something different. I am not sure what I did do wrong.
Hello there ! I'm in the same situation here...
Try to update my rom with a new one. (rooted my shield during the killswitch event)
What i did : update the recovery, dl a rom and open gapps. Then instal them with the nomoreota.zip
(i did not perform a factory reset before...)
I waited the 10 minutes and was still on the nvidia logo.
So... Back to recovery : factory reset, wipe cache, data...
Abd push new roms and opengapps and still stuck on the logo (i wait the 10 minutes everytime)
If anyone have a solution, it would be great
Vincent
Just to let you know that the post" [HELP] return to stock by manigault" help me to re instal my shield tablet. So if anyone have an issue like this, try this post.
Beware, if no back up, all your data will be lost.
Vincent
- edit -
Now I have the boot loop while charging... :crying:
Meaning that when I charge my phone, it reboot autom. and... We're stuck...
Asus Transformer TF 101… Was lying for a few years in the drawer.
Have decide to start using it for my daughter.
Had KatKiss rom 5.1 installed and was working fine.
Tried to upgrade to KatKiss 6.0.1 when troubles started.
Upgrade went OK but when was looking for the Google Play app (and service) and tried to install it, something went wrong…
At the moment, after spending a few hours with "POWER + VOLUME DOWN" and / or "POWER + VOLUME UP" I get stuck on splash screen with the KitKiss logo (the dog with the 4 balls) unable to do anything (trying to turn off, it starts automatically – the only way I can get it off is by letting the battery to runout) – Any advise would be appreciated !!!
I just got mine going again and had the same issue. I have re-flashed the latest ROM and the SU that was still on the system. GAPS is working but I am going to try to get something else on there like MicroG.
So re-flash it and see how it goes.
i cannot get into recovery.
Did you do it via ADX and ADB?
Hi everyone.
I have a ASUS TF300T for over 10 years now. It is an awesome tablet and the last 4 years it has been my daughter's playing buddy. Around 6 years ago, as the performance of the tablet was horrible, I started to inform my self of what I could do to have a usable tablet again and that was when I found out about custom roms. So I did my research, unlocked the bootloader, installed TWRP bootloader and flash Timduru's ROM to it. It worked like a charm. Great performance and usability for the almost dead (thanks to ASUS) TF300T. Around the time Timduru's last ROM for this tablet was released, was also the last time I upgraded the TWRP to the latest version which I don't remember its version. Now to my problem... Last week my wife told me she couldn't get the tablet to work. As I looked at it, what I saw was the ASUS logo (with the device is unlocked at the top left corner) and then the Timduru's logo comes up and hangs, after a while it reboots to the ASUS logo again and just does everything the same over and over again non stop, can't even shutdown the device. If I hooked the usb cable to a PC it does the same but after 6 reboots the device shuts down. Then I tried to enter recovery so, volume down and power it on, the menu comes up as normal but now I tried to enter TWRP. Splash screen appears and reboots to the ASUS logo again. Then Linux pinguins show up at the top left corner and enters again to the TWRP splash screen and reboots. Now that's where I'm stuck at. Can't do anything. Volume down and power up don't do anything either, it always goes straight to TWRP recovery and reboots again. In the PC the Android device shows up until the tablet restarts again. Also tried adb but it always stalls or gives some strange info until the tablet restarts again. So my question is... I anyone able to help me restore this back to funcionality? My daughter would really appreciate your help guys! Thanks!
Tuzy said:
Hi everyone.
I have a ASUS TF300T for over 10 years now. It is an awesome tablet and the last 4 years it has been my daughter's playing buddy. Around 6 years ago, as the performance of the tablet was horrible, I started to inform my self of what I could do to have a usable tablet again and that was when I found out about custom roms. So I did my research, unlocked the bootloader, installed TWRP bootloader and flash Timduru's ROM to it. It worked like a charm. Great performance and usability for the almost dead (thanks to ASUS) TF300T. Around the time Timduru's last ROM for this tablet was released, was also the last time I upgraded the TWRP to the latest version which I don't remember its version. Now to my problem... Last week my wife told me she couldn't get the tablet to work. As I looked at it, what I saw was the ASUS logo (with the device is unlocked at the top left corner) and then the Timduru's logo comes up and hangs, after a while it reboots to the ASUS logo again and just does everything the same over and over again non stop, can't even shutdown the device. If I hooked the usb cable to a PC it does the same but after 6 reboots the device shuts down. Then I tried to enter recovery so, volume down and power it on, the menu comes up as normal but now I tried to enter TWRP. Splash screen appears and reboots to the ASUS logo again. Then Linux pinguins show up at the top left corner and enters again to the TWRP splash screen and reboots. Now that's where I'm stuck at. Can't do anything. Volume down and power up don't do anything either, it always goes straight to TWRP recovery and reboots again. In the PC the Android device shows up until the tablet restarts again. Also tried adb but it always stalls or gives some strange info until the tablet restarts again. So my question is... I anyone able to help me restore this back to funcionality? My daughter would really appreciate your help guys! Thanks!
Click to expand...
Click to collapse
Hi there, I'm sorry for my late replay, because I'm not often been looking up here. Here is my advice:
The only way to get out of the loop you should do a "Buster99" to get back on Stock Rom Jelly Been 4.2.2. After that you'll be able to install the CR again. Therefore you should look up all my posts within this thread over the years. There you'll also find the right links leading to Buster99. Don't forget you need "Minimal ADB and Fastboot" to do a Buster99.
All the best and good luck, ebonit
PS: Here is the link to the Buster99 solution: https://forum.xda-developers.com/showpost.php?p=44244313&postcount=12