please heip me，my phone is g920f - Galaxy S6 Q&A, Help & Troubleshooting

i use odin to flash a offical rom （bofJ)，but the odin show me that
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do？i am so anxious now:crying::crying::crying::crying:

heip
can everyone help me？

by the way，i am poor at English
crying。。。

alliance ware说你 said:
crying。。。
Click to expand...
Click to collapse
alliance ware说你 said:
can everyone help me？
Click to expand...
Click to collapse
alliance ware说你 said:
i use odin to flash a offical rom （bofJ)，but the odin show me that
<ID:0/006> hidden.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do？i am so anxious now:crying::crying::crying::crying:
Click to expand...
Click to collapse
Use this pit
And this Firmware to flash via odin

Related

Newb Flashing Gone Wrong?????

Ok .... first attempt flashing with Odin.
Note Edge from Sprint ROM to UK Stock ROM.
Followed the following instructions:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
And this was the result:
<OSM> N915FYXXU1BOC3_N915FYOXA1BOC3_N915FYXXU1BOB5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
Soooooooooooooooo still plugged in lol. Next Steps help please!!!!!
Flash sprint rom.. or the one which is preinstalled.
Sent from my SM-N915G using Tapatalk
asif.malick said:
Flash sprint rom.. or the one which is preinstalled.
Sent from my SM-N915G using Tapatalk
Click to expand...
Click to collapse
So if I unplug it now, It'll be dead till I download and flash original ROM?
Yup it will
Sent from my SM-N915G using Tapatalk
I've been looking for hours and now my eyes are crossed.... I'm stuck in a boot loop... where can I find a stock sprint ROM to flash and get out of this headache?
nursemm05 said:
I've been looking for hours and now my eyes are crossed.... I'm stuck in a boot loop... where can I find a stock sprint ROM to flash and get out of this headache?
Click to expand...
Click to collapse
Sammobile.com/firmwares
Fortunately it didn't brick. Just restarted
Unfortunately still stuck on 5.1.1. Sprint.
hi im a newbie, wanted to ask is it not possible to flash a sprint phone with a stock uk rom. i have a galaxy s6
download the last of odin 3.10.7 if Iam recalling right .
Sent from my SM-N915G using XDA-Developers mobile app

Samsung Galaxy S3 GT-I9300 cant flashed with odin?

ok i have a problem with Odin and my S3 since a year
i tell you my story. i have an S3 and its bricked since a year. some times i tried to flash with Odin v3.04 and other version but nothing works. today is it again i want to try to flash it. but i tried EVERY tutorial, every method. but it shows evertime IN EVERY FLASH THIS
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
ok and i readed anything about i should try another cable or anything, but does it really help ?
at the moment i try it with this ROM: I9300XXUGNG3_I9300DBTGNG2_I9300XXUGNA8_HOME.tar.md5 but it wont work :/
so pls help me <3
DursyArts said:
ok i have a problem with Odin and my S3 since a year
i tell you my story. i have an S3 and its bricked since a year. some times i tried to flash with Odin v3.04 and other version but nothing works. today is it again i want to try to flash it. but i tried EVERY tutorial, every method. but it shows evertime IN EVERY FLASH THIS
ok and i readed anything about i should try another cable or anything, but does it really help ?
at the moment i try it with this ROM: I9300XXUGNG3_I9300DBTGNG2_I9300XXUGNA8_HOME.tar.md5 but it wont work :/
so pls help me <3
Click to expand...
Click to collapse
i see a communication fail in between flashing tool /computer and device ...this may be due to damage in your usb cable or may be damage in your port of device. You can try flashing again with a new usb cable .
in case you need pit file visit here
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Adi Shakthi said:
i see a communication fail in between flashing tool /computer and device ...this may be due to damage in your usb cable or may be damage in your port of device. You can try flashing again with a new usb cable .
in case you need pit file visit here
http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
Click to expand...
Click to collapse
ok i have 3 USB cables and 3 PC's but i wont work, i tried all combinations and it shows the same error :/ and when i boot in recovery mode it shows many error like "Cant Mount E:/" bla bla when i want to wipe it shows the errors too :/

TWRP recovery flashing J500FN.

I have fillowes this guide http://www.teamandroid.com/2015/11/...5-on-stock-android-5-1-1-lollipop-firmware/2/
step by step usb debugg and oem is enable.
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried so man times now bricked it twice with diffrent guides.
Wgat is it that I'm doing wrong is it knox?

Installing TWRP on S7

Hello,
I have been trying to install TWRP on my T-mumble S7, no luck. I have the lastest version of odin, and have played round-robin with the usb ports. This is my Odin log
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/003> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would awesome
Did you root first?
Sent from my SM-G930F using Tapatalk
T-Mobile US? You have the Snapdragon processor?
Then as far as I know it is not possible to flash custom Recovery...

I NEED HELP!!! 955U ODIN Failed, then recovery failed and FRP LOCK

So the other day I was going to try rooting my s8+ with Snapdragon processor and US model. I downloaded Prince comsy ODIN 3.12 and then was going to flash the SAM PWND software for my model. Odin failed and then at the point, my phone would not load past the Verizon logo on bootup. So after multiple tries I decided well mabye a factory reset will work. I was wrong, so now the reset erased data then started updating software and the android guy dies and says no commands. I can get to recovery mode and I have tried safe mode, normal reboot and even if i turn device off it turns right back on and will continue in a boot loop. I was using a USB 3.0 Port when I first tried the Odin flash, but then i read that is bad so ive only used my usb 2.0 ports after that.
** After odin fails my phone Sometimes says " SW REV CHECK FAIL : [ABL] FUSED 4 >BINARY 3
It always says FRP lock: ON will this be my cause?
So now I downloaded
AP_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT_meta.tar
BL_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
CP_G955USQS3CRE2_CP9619736_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
CSC_OYN_G955UOYN3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
HOME_CSC_OYN_G955UOYN3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
USERDATA_USC_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
I have tried only flashing the BL and the CSC but still a no go. It keeps failing. I also placed the AP with AP, BL with BL, CP with CP, and the HOME CSC with CSC, and the log fails as shown below... I have spaced the log where the fails are located..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Removed!!
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port. WHAT!!!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4636 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4636 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
I have tried multiple usb ports and cables. I have read many forums of ODIN fails, some reset phones without odin and it works, others try over and over then normally get it on try 3 or 4, some reset odin, I even have a normal un modded version of odin 3.13 and thats what im currently using and that is what the log above is from. I was on Oreo 8.0 before messing up the phone. I have spent alot of time messing with this phone but cant figure it out. Im on a laptop with windows 7 premium 64bit.
ANY and all help is greatly appreciated :/ THANK YOU FOR YOUR TIME!!!
Also please note during the time I use odin, I never see a status on the top in the squares, untill it fails then I see a red FAIL. I noticed in other threads I looked at it showed status like Boot, recovery, etc... even a green PASS when it works. I see NOTHING untill it fails and I see the red fail.
bad signal
Hello can anyone help me please with a quick response my data connection (here in Algeria) is always on H+ and never 4G. I've been around other phones that will get 4G everywhere but I won't and the signal bars are to bad and many people's caled me and i dont reserve there calls please any solution !!?
Phone has been flash to the last frameware from sammobile by odin and reset to factory and still doing this. Any ideas?
Hasanberkdar said:
Hello can anyone help me please with a quick response my data connection (here in Algeria) is always on H+ and never 4G. I've been around other phones that will get 4G everywhere but I won't and the signal bars are to bad and many people's caled me and i dont reserve there calls please any solution !!?
Phone has been flash to the last frameware from sammobile by odin and reset to factory and still doing this. Any ideas?
Click to expand...
Click to collapse
This is considered thread hijacking and is considered rude.Please post in your own Q&A thread
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
overclocked636 said:
Also please note during the time I use odin, I never see a status on the top in the squares, untill it fails then I see a red FAIL. I noticed in other threads I looked at it showed status like Boot, recovery, etc... even a green PASS when it works. I see NOTHING untill it fails and I see the red fail.
Click to expand...
Click to collapse
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Thanks I'll try it
eddyo1993 said:
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Click to expand...
Click to collapse
I'll try that when I get home I appreciate the help!!
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
overclocked636 said:
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
Click to expand...
Click to collapse
The link seem to work for me. Go to updato.com then type in your model number
overclocked636 said:
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
Click to expand...
Click to collapse
This is the firmware with CRE9 update.
https://ibb.co/eB5P8U
See photo attached , this happens when I click the download button. :/
I do appreciate your time and helping me , can't wait to fix this darn phone
I got it downloading from Sam mobile
overclocked636 said:
I got it downloading from Sam mobile
Click to expand...
Click to collapse
Never seen that happen before. Try using the Odin I sent you that's what I used before on my phone and it worked. Did you manually looked up the firmware on updato? Also if sammobile is sill an issue I could upload the firmware on Google Drive and send you the link.
---------- Post added at 05:01 PM ---------- Previous post was at 04:58 PM ----------
overclocked636 said:
I got it downloading from Sam mobile
Click to expand...
Click to collapse
Also please press the reply button so I get notified.
eddyo1993 said:
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Click to expand...
Click to collapse
eddyo1993 said:
Never seen that happen before. Try using the Odin I sent you that's what I used before on my phone and it worked. Did you manually looked up the firmware on updato? Also if sammobile is sill an issue I could upload the firmware on Google Drive and send you the link.
---------- Post added at 05:01 PM ---------- Previous post was at 04:58 PM ----------
Also please press the reply button so I get notified.
Click to expand...
Click to collapse
I did look up on updato and I got a error still, I downloaded the Odin you provided so I will be trying that either tonight if I get home early from class or tomorrow after work, I got the firmware downloaded late last night so should be good to go now I hope!! Sam mobile is no longer a issue it successfully downloaded ... I don't know why I was having issue before. Thanks so much. I'll let you know how it goes. Do I need combination firmware to unlock my FRP?
overclocked636 said:
I did look up on updato and I got a error still, I downloaded the Odin you provided so I will be trying that either tonight if I get home early from class or tomorrow after work, I got the firmware downloaded late last night so should be good to go now I hope!! Sam mobile is no longer a issue it successfully downloaded ... I don't know why I was having issue before. Thanks so much. I'll let you know how it goes. Do I need combination firmware to unlock my FRP?
Click to expand...
Click to collapse
I'm not sure on the FRP. Is that when Google ask you to sign in before you can use the phone? Keep me updated if it worked.
eddyo1993 said:
I'm not sure on the FRP. Is that when Google ask you to sign in before you can use the phone? Keep me updated if it worked.
Click to expand...
Click to collapse
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
overclocked636 said:
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
Click to expand...
Click to collapse
Yes, you can only SAM PAWND and other similar ROMs ONLY if your bootloader is V3 or earlier.
Samsung has patched V4 and V5 already, so until another work around is found, we are stuck with no root..
You can try the safestrap (Bootstrap) thing if you are feeling brave...
https://forum.xda-developers.com/ga...recovery-locked-nougat-7-0-safestrap-t3772761
overclocked636 said:
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
Click to expand...
Click to collapse
Hey!!! No problem I'm glad it worked!!! Just help others out if they need it as well. You had 200+ people see your post but none helped out. Anything comes up please feel free to PM me.
did you try to flash the firmware with proper binary?

Categories

Resources