Related
Hey all, first time posting here,
So, I rooted my phone a few days ago and flashed Invisiblek's CM10(Running the August 10th build), using the instructions found here. Haven't had any problems at all until now. I had to reboot my phone, and now it's stuck in a boot loop. The CWMR screen is missing the background, and it won't let me boot into ODIN mode. What do I do?
Thank you for any help!
Krog216 said:
Hey all, first time posting here,
So, I rooted my phone a few days ago and flashed Invisiblek's CM10(Running the August 10th build), using the instructions found here. Haven't had any problems at all until now. I had to reboot my phone, and now it's stuck in a boot loop. The CWMR screen is missing the background, and it won't let me boot into ODIN mode. What do I do?
Thank you for any help!
Click to expand...
Click to collapse
You should be able to boot into odin by taking the battery out, and then putting it back in while holding Volume Down + Home + Power at the same time. And then just flash a stock or stock rooted image in odin.
There we go. Thank you very much!
Flashed the ROM linked from here. Now I'm stuck on the 4G LTE screen. Suggestions?
Flashed it again. Still nothing. Did I brick it?
If you can get into Odin mode, I suggest flashing back go stock and starting over. If you can't get Odin to work, or even enter download mode then you might have other problems.
Sent from my SCH-I535 using Tapatalk 2
I am (thankfully) able to get into odin mode. Where can I get the stock ROM for the US VZW version? I haven't been able to find that anywhere, and the thread on here only has dead links.
Flashed again, still nothing. I get stuck at the 4G LTE loading screen.
Found a stock ROM and flashed back to it. Still stuck at that screen. Did I brick it?
dont forget to wipe data/cache...
it happens
you can do this by booting into stock recovery
Volume UP + Home + power.
vega04 said:
dont forget to wipe data/cache...
it happens
you can do this by booting into stock clock work
Volume UP + Home + power.
Click to expand...
Click to collapse
Oh my god I love you.
It works!!!
Krog216 said:
Oh my god I love you.
Click to expand...
Click to collapse
i love you too.. lol ive been there..
So, I've got it worked out so that I have a recovery image made of a rooted version of the stock ROM. However, I SWEAR a kitten dies every time I look at the TouchPiss interface, but whenever I try to flash Invisiblek's CM10 I get stuck in a boot loop. Any ideas as to what's causing it? I've tried clearing data/cache/davlik cache before flashing the ROM, after flashing the ROM...
Would there be any way at all that I could flash it through ODIN?
URGENT HELP NEEDED PLEASE;
Can you please help my buddy Tyler, he just got the T-Mobile Note 5, and he rooted it, and installed TWRP Recovery, and flashed a ROM for the first time, but he's afraid he may have bricked his device ?
Here's the thread I have been coaching him at. Any opinions ?
http://hardforum.com/showthread.php?t=1869279&page=23
Thank you.
As long as he knows what he's doing and has a unlock bootloader he should be fine
airam0931 said:
As long as he knows what he's doing and has a unlock bootloader he should be fine
Click to expand...
Click to collapse
He did get the whole root thing figured out, and his phone does have SuperSU installed, he then installed TWRP Recovery through Odin, and is running the latest Modem COI5.
He downloaded a T-Mobile ROM, and Arty97 Kernel, flashed the ROM + Kernel, and he said been stuck on the boot screen for 25 minutes, and can't get back into Recovery.
Suggestions ?
Actually never mind after reading that whole thread I would reccomend download the stock rom and then flashing it . This happened to me when I flashed the wrong framework for my device. It got stuck on the same screen . I flashed in with my stock rom and it went back to normal and I didn't lose anything.
Tyler made this comment, can't seem to even power off the phone.
amn, you really are trying to help. That's awesome. Sadly however, the thing won't turn off no matter how long I hold the power button.
I saw one thread on reddit that suggested downloading a stock ROM and flashing through Odin. But, I can't find a stock ROM and I don't think you can flash ROMs through Odin.
He did manage to get this after trying to power down./
[/QUOTE]
Now what he asked ?
Tell him to put it into download mode then flash his stock rom . I Googled it and found it super easily and even found instructions
This is Tyler, the guy Zorachus has tried so hard t help. I've been googling for stoc ROMs but haven't found any to download. Can I flash a ROM through Odin?
I'm iPhone jailbreaker guy, so all this Android stuff is new t me.
I want to post the link I found but I can't because this site has a 10 post rule to post links and I haven't done 10 posts and don't worry this is my first Android phone . I've been jailbreaking since 4.1.2 so the switch was weird for me too haha but yes you can flash flash a rom through Odin
Here:
http://www.sammobile.com/firmwares/download/56127/N920TUVU2COI5_N920TTMB2COI5_TMB/
Make sure it is the correct model and follow the instructions.
Don't worry, you should be fine.
If he got stuck again, hold down volume up and down and power at the same time and it reboots
Sent from my SM-N920T using Tapatalk
Get back to download mode by holding home power and volume down at same time and Odin right stock rom for n920t and should be fine you can find all you need in the n5 t-mobile forum on xda-developers most everyone in forum are very helpful
Sent from my SM-N920T using Tapatalk
matteosaeed said:
If he got stuck again, hold down volume up and down and power at the same time and it reboots
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Just the volume down and power does the trick ?
Sent from my SM-N920T using Tapatalk
I had this same issue, I found out that TWRP did not actually flash the rom so the phone sat on the boot logo with no OS to load, then read up on arter97's kernel and he recommends switching to PhilZ touch recovery instead of TWRP. He provides a download to this recovery on his thread I do believe. Luckily I had downloaded the recovery and simply flashed it via TWRP (Hint: while I was stuck on the boot up logo, the only thing that worked for me is holding Vol-, home and power, then as soon as the screen goes dark, switch from holding Vol- and hold Vol+ instead, wait a bit and recovery should boot).
Once I got Philz touch installed, I rebooted the recovery and voila, no more TWRP. I simply flashed the ROM through it and rebooted again, back in business.
So to conclude, I get the feeling you're experiencing the same problem, where you went wrong is using TWRP with the arter97 kernel.
EDIT: You're in luck! Go here: http://arter97.com/browse/exynos7420/kernel/5.0/n920tw8/
Grab the tar.md5 file and flash with Odin with the phone in download mode, then reboot to new recovery and flash your rom again
micfinn said:
I had this same issue, I found out that TWRP did not actually flash the rom so the phone sat on the boot logo with no OS to load, then read up on arter97's kernel and he recommends switching to PhilZ touch recovery instead of TWRP. He provides a download to this recovery on his thread I do believe. Luckily I had downloaded the recovery and simply flashed it via TWRP (Hint: while I was stuck on the boot up logo, the only thing that worked for me is holding Vol-, home and power, then as soon as the screen goes dark, switch from holding Vol- and hold Vol+ instead, wait a bit and recovery should boot).
Once I got Philz touch installed, I rebooted the recovery and voila, no more TWRP. I simply flashed the ROM through it and rebooted again, back in business.
So to conclude, I get the feeling you're experiencing the same problem, where you went wrong is using TWRP with the arter97 kernel.
EDIT: You're in luck! Go here: http://arter97.com/browse/exynos7420/kernel/5.0/n920tw8/
Grab the tar.md5 file and flash with Odin with the phone in download mode, then reboot to new recovery and flash your rom again
Click to expand...
Click to collapse
Hey thanks!!!! You saved my a$$ I have been dealing with this for 6+ hours now & couldn't get past the boot logo & your suggestion worked! I <3 you! Lol
Thank **** I found your post mate, I was stuck in a never ending boot loop with no way to get into recovery either.
The trick about holding down Vol-, home and power, and then switching to vol+ at blackscreen but keeping the others down, that thing worked and I was able to make it into my recovery!
Sadly however I made the most foolish mistake of all in my hurry and went for a factory reset.
On top of that I don't think that Titanium Backup was set to auto sync on my new phone so I might possibly have lost everything I have. Let's find out.
So I used my galaxy note edge SM-N915F for 6 months with no problem, but I did the Marshmallow 6.0.1 update and now it doesn't work. As I said in the title when I try to start it reboots over and over again.
Any suggestions?? It opens only downloading mode and I flashed a rom(official russian Marshmallow 6.0.1 rom) with Odin and it didn't work.
Please help me! Thanks in advanced!
gazeL_ said:
So I used my galaxy note edge SM-N915F for 6 months with no problem, but I did the Marshmallow 6.0.1 update and now it doesn't work. As I said in the title when I try to start it reboots over and over again.
Any suggestions?? It opens only downloading mode and I flashed a rom(official russian Marshmallow 6.0.1 rom) with Odin and it didn't work.
Please help me! Thanks in advanced!
Click to expand...
Click to collapse
When using the correct button combination are you able to enter recovery or does it continue to bootloop? Power, Home and Volume Up is used to enter recovery. When you attempted to flash the stock firmware through Odin, where did you download the stock firmware from?
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
When using the correct button combination are you able to enter recovery or does it continue to bootloop? Power, Home and Volume Up is used to enter recovery. When you attempted to flash the stock firmware through Odin, where did you download the stock firmware from?
Click to expand...
Click to collapse
Yes, it continue to bootloop even when I try to open in recovery mode. I succesfully entered recovery mode only one time and was able to full wipe, full cache the phone. This is after the flashing. I flashed the stock firmware a week ago and I actually don't remember where I downloaded it from. Thanks for your interest.
gazeL_ said:
Yes, it continue to bootloop even when I try to open in recovery mode. I succesfully entered recovery mode only one time and was able to full wipe, full cache the phone. This is after the flashing. I flashed the stock firmware a week ago and I actually don't remember where I downloaded it from. Thanks for your interest.
Click to expand...
Click to collapse
Most firmwares are available from sammobile.com. Which version of Odin are you using? Also, when you performed the flash through Odin, did Odin show the flash to be successful on the progress window? Was your Note Edge rooted or did you have a custom recovery installed before the bootloop issue started?
fast69mopar said:
Most firmwares are available from sammobile.com. Which version of Odin are you using? Also, when you performed the flash through Odin, did Odin show the flash to be successful on the progress window? Was your Note Edge rooted or did you have a custom recovery installed before the bootloop issue started?
Click to expand...
Click to collapse
I used Odin3. Yes, Odin showed me the flash to be successful. My Edge didn't rooted before and I didn't have a custom recovery. I had an official software. I actually want to add an screenshot but XDA doesn't let me.
gazeL_ said:
I used Odin3. Yes, Odin showed me the flash to be successful. My Edge didn't rooted before and I didn't have a custom recovery. I had an official software. I actually want to add an screenshot but XDA doesn't let me.
Click to expand...
Click to collapse
Have you tried a different version of Odin to perform the flash? I have 3.07 and 3.10 and sometimes one version will work perfectly and the other will show a successful flash but the device will still bootloop. Check which version you have and then download a different one to test with. That may be your issue.
Also, can you enter recovery at all anymore? If you try to enter recovery several times in a row during the bootloop process you may be able to access it after a few attempts. If you can enter recovery, wipe data/factory reset for me. Then attempt to boot. If it loops again, download the official firmware from sammobile.com and flash it with your original version of Odin. If it still loops, then flash it again with the different version of Odin. Lemme know how it goes. I'll do what I can to help.
fast69mopar said:
Have you tried a different version of Odin to perform the flash? I have 3.07 and 3.10 and sometimes one version will work perfectly and the other will show a successful flash but the device will still bootloop. Check which version you have and then download a different one to test with. That may be your issue.
Also, can you enter recovery at all anymore? If you try to enter recovery several times in a row during the bootloop process you may be able to access it after a few attempts. If you can enter recovery, wipe data/factory reset for me. Then attempt to boot. If it loops again, download the official firmware from sammobile.com and flash it with your original version of Odin. If it still loops, then flash it again with the different version of Odin. Lemme know how it goes. I'll do what I can to help.
Click to expand...
Click to collapse
I tried different Odin versions but it didn't work. I can flash rom succesfully but after the flashing it doesn't open in recovery mode. It bootloops. Once, it opened in recovery mode and I did wipe data/factory reset after first flashing and it didn't work. Now, it still doesn't open anyway except Downloading Mode.
gazeL_ said:
I tried different Odin versions but it didn't work. I can flash rom succesfully but after the flashing it doesn't open in recovery mode. It bootloops. Once, it opened in recovery mode and I did wipe data/factory reset after first flashing and it didn't work. Now, it still doesn't open anyway except Downloading Mode.
Click to expand...
Click to collapse
Are you flashing the exact same ROM version you were using before this problem started? We're you using 5.1.1 before you accepted the MM OTA?
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Are you flashing the exact same ROM version you were using before this problem started? We're you using 5.1.1 before you accepted the MM OTA?
Click to expand...
Click to collapse
I used 5.1.1 to before I accepted the MM OTA and I didn't have any p roblem with 5.1.1. I tried to flash different type of 6.0.1 after the problem. Just, problem started with the MM OTA. I will try to flash 5.1.1. So, I guess I need to enter recovery to wipe data/factory reset before flashing 5.1.1 but I can not because it still bootloop. How can I do wipe data/factory reset?
Edit1: And I readed somewhere, they said that it is about the kernel? Is it possible?
Edit2: A few minutes ago, I succeeded to enter recovery mode, I did factory reset and phone still bootloop. It doesn't open. Now, I am downloading the 5.1.1. I will try to flash 5.1.1.
Edit3: I tried a lot of times but it is still same. I flashed the 5.1.1 with different versions of Odin. I successful with flashed it but phone wants to enter in recovery mode after flashing and it bootloops. It is trying to enter recovery mode all time but it doesn't work. Sometimes, on charge, it close to enter the recovery mode. I said in edit2 I succeeded to enter recovery mode, but I didn't say that it was on charge because I discover this now. So, I don't know what I have to do, I am waiting for your suggestions.
gazeL_ said:
I used 5.1.1 to before I accepted the MM OTA and I didn't have any p roblem with 5.1.1. I tried to flash different type of 6.0.1 after the problem. Just, problem started with the MM OTA. I will try to flash 5.1.1. So, I guess I need to enter recovery to wipe data/factory reset before flashing 5.1.1 but I can not because it still bootloop. How can I do wipe data/factory reset?
Edit1: And I readed somewhere, they said that it is about the kernel? Is it possible?
Edit2: A few minutes ago, I succeeded to enter recovery mode, I did factory reset and phone still bootloop. It doesn't open. Now, I am downloading the 5.1.1. I will try to flash 5.1.1.
Edit3: I tried a lot of times but it is still same. I flashed the 5.1.1 with different versions of Odin. I successful with flashed it but phone wants to enter in recovery mode after flashing and it bootloops. It is trying to enter recovery mode all time but it doesn't work. Sometimes, on charge, it close to enter the recovery mode. I said in edit2 I succeeded to enter recovery mode, but I didn't say that it was on charge because I discover this now. So, I don't know what I have to do, I am waiting for your suggestions.
Click to expand...
Click to collapse
Let's see if we can get your Note Edge into safe mode without bootlooping. Use these steps:
Turn on safe mode
Turn the device off.
Press and hold the Power and Volume down key.
Continue to hold the Volume down key until the device finishes restarting.
Safe mode will display in the bottom left corner of the screen.
Release the Volume down key when you see Safe Mode.
I have read a few forums and notes about booting into safe mode can stop the bootloop. Once it's successfully booted into safe mode we can attempt to boot normally. Give it a shot and I'll keep researching. Good luck.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Let's see if we can get your Note Edge into safe mode without bootlooping. Use these steps:
Turn on safe mode
Turn the device off.
Press and hold the Power and Volume down key.
Continue to hold the Volume down key until the device finishes restarting.
Safe mode will display in the bottom left corner of the screen.
Release the Volume down key when you see Safe Mode.
I have read a few forums and notes about booting into safe mode can stop the bootloop. Once it's successfully booted into safe mode we can attempt to boot normally. Give it a shot and I'll keep researching. Good luck.
Click to expand...
Click to collapse
I tried a lot of times but it didn't work. I tried on charge, without charge, with different cables but still bootloop. It is just like a joke.
I tried with Kies but Kies didn't see my edge. It didn't connect. On the Kies window, it said "connecting..." so I waited about 2 hours and it didn't connect. Then, I tried to emergency firmware recovery, it didn't see my edge again.
Download Samsung Smart Switch and see if it recognizes your device.
Sent from my Nexus 6 using XDA-Developers mobile app
I have the same problem with my friend's phone (SM-N915F) , I tried all the suggested solutions to no avail.
Qaseeh said:
I have the same problem with my friend's phone (SM-N915F) , I tried all the suggested solutions to no avail.
Click to expand...
Click to collapse
Do you have your friends device with you and a PC to use? Was your friend trying to root the device or install a custom recovery or a custom ROM when this happened?
Or, did your friend accept the OTA for 6.0.1 MM and then ended up in a bootloop after installing the OTA?
fast69mopar said:
Do you have your friends device with you and a PC to use? Was your friend trying to root the device or install a custom recovery or a custom ROM when this happened?
Or, did your friend accept the OTA for 6.0.1 MM and then ended up in a bootloop after installing the OTA?
Click to expand...
Click to collapse
Yes i still have my friend's phone with me and I have a PC .. he wasn't trying to root it or anything .. he said that the phone was too slow then it rebooted by itself then the bootloops started. i have tried several time to get to the recovery but I couldn't I can only put it on download mode that's where I tried to flash a 6.0.1 MM stock rom using odin and didn't succeed
Qaseeh said:
Yes i still have my friend's phone with me and I have a PC .. he wasn't trying to root it or anything .. he said that the phone was too slow then it rebooted by itself then the bootloops started. i have tried several time to get to the recovery but I couldn't I can only put it on download mode that's where I tried to flash a 6.0.1 MM stock rom using odin and didn't succeed
Click to expand...
Click to collapse
What version of Odin are you using to flash the factory firmware? Try to flash the firmware with a different version of Odin.
Also, you said the flash was unsuccessful using Odin. Was there an error message in Odin at the bottom left corner of the screen? If so, what was the error? I have had several flashes fail using one version of Odin but pass with a different version.
Also, what version of Android was your friends device using before you tried to flash the 6.0.1 firmware? If the device was running 5.1.1, have you tried to flash a 5.1.1 firmware with Odin?
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
What version of Odin are you using to flash the factory firmware? Try to flash the firmware with a different version of Odin.
Also, you said the flash was unsuccessful using Odin. Was there an error message in Odin at the bottom left corner of the screen? If so, what was the error? I have had several flashes fail using one version of Odin but pass with a different version.
Also, what version of Android was your friends device using before you tried to flash the 6.0.1 firmware? If the device was running 5.1.1, have you tried to flash a 5.1.1 firmware with Odin?
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have used Odin version 1.85 then tried with Odin v3.11.1 , the flash succeeded no errors but the phone stayed as is .. Actually, he doesn't know the android version of his phone before it bricked. Are u suggesting that I should try to flash a 5.1.1?
Qaseeh said:
I have used Odin version 1.85 then tried with Odin v3.11.1 , the flash succeeded no errors but the phone stayed as is .. Actually, he doesn't know the android version of his phone before it bricked. Are u suggesting that I should try to flash a 5.1.1?
Click to expand...
Click to collapse
Search for Odin 3.07 and 3.10. I use both of these versions. When all else fails for me I use 3.07 and it always seems to work for me. Also, I'm betting it was running 5.1.1 because 6.0.1 hasn't been out that long for the Saudi Arabian Note Edge. I would flash the 5.1.1 stock firmware using Odin 3.07 and see if it will allow you to boot normally. Let me know how it goes. Good luck.
Sent from my Nexus 6 using XDA-Developers mobile app
fast69mopar said:
Search for Odin 3.07 and 3.10. I use both of these versions. When all else fails for me I use 3.07 and it always seems to work for me. Also, I'm betting it was running 5.1.1 because 6.0.1 hasn't been out that long for the Saudi Arabian Note Edge. I would flash the 5.1.1 stock firmware using Odin 3.07 and see if it will allow you to boot normally. Let me know how it goes. Good luck.
Sent from my Nexus 6 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried flashing android stock rom 5.1.1 like u suggested using Odin 3.07 and 3.10 but still nothing changed ... I think it's totally bricked.
Thank you fast69mopar I appreciate your inputs :good:
Qaseeh said:
I tried flashing android stock rom 5.1.1 like u suggested using Odin 3.07 and 3.10 but still nothing changed ... I think it's totally bricked.
Thank you fast69mopar I appreciate your inputs :good:
Click to expand...
Click to collapse
Dammit man. Ill keep looking through my Samsung stuff and see what I can find. I sent my cousin an email yesterday who works for Samsung in their Tier 3 Technical Support/Case Management Group and asked her for some help. I'm really curious as to what she has to say on the subject. When it comes to a Samsung Galaxy or Note device she is a PRO. When I run into an issue with any of my Samsung devices that I can't fix, I call or email her. Keep working on it and we will find a solution.
Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk
fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..
fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available
jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....
I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..
I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
What model does your phone say in download mode, and what firmware did you flash?
Beanvee7 said:
What model does your phone say in download mode, and what firmware did you flash?
Click to expand...
Click to collapse
Sorry,
it is a G930F
I downloaded the File from SamFirm (G930FXXU2ERE8_CL13438344_QB18102270_REV00) and used Odin3 v3.13.1.
any solutions?
I have exactly the same Problem.
Did you find a possibility to fix that ?
I´m going crazy with that my device is unrootet and on stock Rom when it came into bootloop , i tried to fix it with Odin a couple of times used the latest Firmware from Samfirm but it doesnt work and gets stuck on erasing Screen and keeps on restarting . I can always get into download mode but i cant open the recovery . Another thingis that my System Status in the download mode says custom ?? i never flashed a custom Rom on it Does anyone know if i can bring it back to Samsung like that because i still have a guarantee
i would be so thankful for your help guys
cheers
Had a similar issue before with an S6, and one of the workarounds that works for a lot of samsung issues is to flash the phone through ODIN with a repair firmware and a pit file. If im remembering right the firmware files are AP, CP, BL and CSC, also the pit file. you gotta check repartition in odin too.
any idea how to fix this ? In the same boat, can't figure out how to solve this.
same thing happened to me, i can't get it to work
spittfire said:
Hello guys,
after days of reading and trying i decided to open a thread.
I got my Samsung stuck on Erasing Screen after an update.
I tried to Flash Stock Rom via ODIN. The Flash passed but after Booting the device stuck on the Bluescreen with "Erasing" on the bottom.
I tried Flashing with Pit, and without. With Nand erase and without. With Re-partition and without.
I can not access recovery with VOL UP + Home + Power.
Device is not rooted.
I am very thankful for any advice.
Thanks in advance.
Click to expand...
Click to collapse
hi have you solved then? I've got the same problem
can´t believe there is no solutions for this
i have the same problem with a galaxy A20 SM-A205G
i flahshed diferrent ROMs from diferent countries, with PIT FILE and without it and nothing works
maybe the difference with other posters here is that i can access to recovery mode but i dont find anything about fix this phone from recovery mode or something like that.