Greetings....
Assembling a list of all RUU/firmware threads so that users no longer have to dig to find what's needed. Support for each will be found in the linked thread itself while general questions like "which one is applicable to my situation?" can be handled in this thread.
If you are S-ON
Your options are somewhat limited.. naturally.
RUU (4.4.2, 4.4.3, 4.4.4, 5.0.1, 6.0) in EXE/ZIP format
- http://forum.xda-developers.com/verizon-htc-one-m8/general/official-ruu1-55-605-2-t2883845
If you are S-OFF
RUU 6.0 zip thread
- http://forum.xda-developers.com/ver...pment/stock-m-firmware-nand-recovery-t3330972
RUU 5.0.1 (comes pre-rooted (EXE/zip support)
- http://forum.xda-developers.com/ver...zip-ruu-m8vzw-5-0-1-s-off-onlynewest-t3047103
RUU 4.4.4 (comes pre-rooted) (EXE/zip support)
- http://forum.xda-developers.com/ver...ent/ruu-m8vzw-4-4-4-s-off-onlynewest-t2914914
RUU 4.4.3 (comes pre-rooted) (zip support)
- http://forum.xda-developers.com/ver...ent/ruu-m8vzw-4-4-3-s-off-onlynewest-t2873144
RUU 4.4.2 (comes pre-rooted) (zip support)
- http://forum.xda-developers.com/showthread.php?t=2727831
Firmware only
4.4.3/4.4.4/5.0.1 Stock Recoveries, Stock kernels (boot), Stock ADSP, and many more....
- http://forum.xda-developers.com/showthread.php?t=2723159
4.4.2/4.4.3/4.4.4 Radios
- http://forum.xda-developers.com/verizon-htc-one-m8/development/radios-0-89-20-0222-t2824882
Note.... If you are needing to go back to locked and S-on for warranty purposes but are too leery to do it yourself, help is available via pm. Don't let your s/lock status from getting proper hardware RMA'S!
If you have bricked one beyond fixing and can't get it replaced, please consider donating it rather than throwing it in a desk drawer, shooting it, or whatever other crazy idea comes to mind. I can almost always put a bricked phone to good use.
Anyone who would like to use fastboot/adb for this device please use the following version fastboot/adb. It's HTC's own version. It works on pc's with less ram and it automatically breaks up a single zip into pieces for transfer. It also reflashes automatically if needed.
USE IT!
https://www.androidfilehost.com/?fid=95784891001612150
https://www.androidfilehost.com/?fid=95784891001612150
Looks good bro.
Great job!
Sweet! Thanks bro =]
Nice! I admit that the firmware was confusing for me on this phone, but thanks to dottat's posts, I figured it out.
This clears things up a lot and should help quite a few people.
Thanks!
xdadevnube said:
Nice! I admit that the firmware was confusing for me on this phone, but thanks to dottat's posts, I figured it out.
This clears things up a lot and should help quite a few people.
Thanks!
Click to expand...
Click to collapse
What was so confusing?
You are the MAN dottat!! Thanks!
Tigerstown said:
What was so confusing?
Click to expand...
Click to collapse
I managed to figure out the firmware largely due to dottat. There were multiple threads of various age, some with seemingly conflicting advice. This goes for most device forums I follow. There was no authoritative resource, IMO, until this thread.
The search feature was key, I am pretty thorough before embarking in firmware upgrades.
xdadevnube said:
I managed to figure out the firmware largely due to dottat. There were multiple threads of various age, some with seemingly conflicting advice. This goes for most device forums I follow. There was no authoritative resource, IMO, until this thread.
The search feature was key, I am pretty thorough before embarking in firmware upgrades.
Click to expand...
Click to collapse
@xdadevnube what could I do better in my OP of Vzw m8 firmware thread? I would like your input if you have ideas that would help make it easier for new comers to Xda? I would gladly make positive changes to my op to make it a easier an smoother experience. So feel free to tell me your ideas you/anyone might have that would help everyone..thanks I appreciate it.
Tigerstown said:
@xdadevnube what could I do better in my OP of Vzw m8 firmware thread? I would like your input if you have ideas that would help make it easier for new comers to Xda? I would gladly make positive changes to my op to make it a easier an smoother experience. So feel free to tell me your ideas you/anyone might have that would help everyone..thanks I appreciate it.
Click to expand...
Click to collapse
Your OP does contain the required information and instructions, so I can't really complain. One thing that could be helpful is to list the bootloader version info for each firmware release. You listed the most recent one right at the top of the thread, so at least it is easy to tell whether a given device is on the latest firmware or not. Because your thread is the main firmware thread, perhaps it would be best if the OP were organized into sections for 4.4.2, 4.4.3, and 4.4.4. It could be clarified which partitions are modified in the process, and whether the radios are affected. Install instructions could be put in their own spot.
These are only ideas! Also, your thread should probably be stickied. Thanks for all you do.
xdadevnube said:
Your OP does contain the required information and instructions, so I can't really complain. One thing that could be helpful is to list the bootloader version info for each firmware release. You listed the most recent one right at the top of the thread, so at least it is easy to tell whether a given device is on the latest firmware or not. Because your thread is the main firmware thread, perhaps it would be best if the OP were organized into sections for 4.4.2, 4.4.3, and 4.4.4. It could be clarified which partitions are modified in the process, and whether the radios are affected. Install instructions could be put in their own spot.
These are only ideas! Also, your thread should probably be stickied. Thanks for all you do.
Click to expand...
Click to collapse
hey whats up. I have made major changes to my firmware thread will you go check it out an let em know if i made it user friendly :highfive:
Firmware flash
Hello everyone. I am new to this Forum. I've only been here a few days. I have an Unlocked/S-Off Verizon HTC One M8 that I recently purchased from Ebay. I had a little trouble for a while when I first got it as it was running 4.4.2 and I took the OTA update to 4.4.3 and it messed up the phone. I didn't know it was Unlocked/S-Off'd. And the seller said it wasn't rooted any more. Well so now that I know it is even after running the Verizon RUU, I was wondering if I need to upgrade the firmware one upgrade at a time (meaning 4.4.3 and then 4.4.4)? Or can I jump to a 5.01 Lollipop ROM? I have TWRP installed and I used Flashify to install it. I'm hoping to use Flashify more for installing zips. Any help/suggestions would be greatly appreciated. Thank you....oh and I'm loving this M8!!!!
Tigerstown said:
hey whats up. I have made major changes to my firmware thread will you go check it out an let em know if i made it user friendly :highfive:
Click to expand...
Click to collapse
Looks good to me.
den_hart said:
Hello everyone. I am new to this Forum. I've only been here a few days. I have an Unlocked/S-Off Verizon HTC One M8 that I recently purchased from Ebay. I had a little trouble for a while when I first got it as it was running 4.4.2 and I took the OTA update to 4.4.3 and it messed up the phone. I didn't know it was Unlocked/S-Off'd. And the seller said it wasn't rooted any more. Well so now that I know it is even after running the Verizon RUU, I was wondering if I need to upgrade the firmware one upgrade at a time (meaning 4.4.3 and then 4.4.4)? Or can I jump to a 5.01 Lollipop ROM? I have TWRP installed and I used Flashify to install it. I'm hoping to use Flashify more for installing zips. Any help/suggestions would be greatly appreciated. Thank you....oh and I'm loving this M8!!!!
Click to expand...
Click to collapse
Rom and firmware are to separate things. You can flash straight to 4.4.4 firmware and then flash a lollipop Rom or any custom Rom.
Sent from my HTC6525LVW using Tapatalk
Firmware Updates
dottat said:
Rom and firmware are to separate things. You can flash straight to 4.4.4 firmware and then flash a lollipop Rom or any custom Rom.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Hello dottat. Thank you for replying to my question(s). Yes I know that a ROM is different than firmware. I was just wondering if I had to upgrade my firmware one update at a time or if I could just jump from 4.4.2 to say 5.0 or 5.01 so that if I wanted to I could put a custom ROM on my M8. I'm not actually sure how high the firmware upgrades go. I've only seen 4.4.4 as the highest so far.
den_hart said:
Hello dottat. Thank you for replying to my question(s). Yes I know that a ROM is different than firmware. I was just wondering if I had to upgrade my firmware one update at a time or if I could just jump from 4.4.2 to say 5.0 or 5.01 so that if I wanted to I could put a custom ROM on my M8. I'm not actually sure how high the firmware upgrades go. I've only seen 4.4.4 as the highest so far.
Click to expand...
Click to collapse
You can go straight to 4.4.4 and get crack flashing. No L firmware yet as we don't have L official.
Sent from my HTC6525LVW using Tapatalk
update process on factory unlocked VZW M8 used with GSM
Hi!
I am getting a verizon factory unlocked model and i am going to use it on a GSM network in india.Since its factory unlocked there should be no issues with the network. .however i had some doubts about the software updates. .so will i be able to receive and install updates normally without resorting to rooting the phone. .some people reported that they had an issue installing the update where it said that they have to be on CDMA or something like that. .Will i be able to overcome such issues by connecting to wifi?Is someone could shed a little light on how the update process works when used abroad with a GSM carrier it would be great!Thank you so much in advance!
balag59 said:
Hi!
I am getting a verizon factory unlocked model and i am going to use it on a GSM network in india.Since its factory unlocked there should be no issues with the network. .however i had some doubts about the software updates. .so will i be able to receive and install updates normally without resorting to rooting the phone. .some people reported that they had an issue installing the update where it said that they have to be on CDMA or something like that. .Will i be able to overcome such issues by connecting to wifi?Is someone could shed a little light on how the update process works when used abroad with a GSM carrier it would be great!Thank you so much in advance!
Click to expand...
Click to collapse
You will always be able to install the s-on ruu from here. The problem is that the latter versions of software while sim unlocked have proven very difficult to use on some carriers because you can no longer edit apn. You have to chose from pre-provided apn and thats only if they show up with your SIM card inserted.
You would be really wise to s-off the phone even if you don't root it as this would be the only way to downgrade if you ended up not having a workable situation on the newer software.
I have a galaxy s4 SGH-l337 provider is Att. I never rooted/hacked/flashed/done anything to my phone, it's all stock/basic.
Been a few days now after the android version V5.0.1 upstalled itself onto my phone. It's awful I wanted to get the new android version graviton, but before i can i need to root my phone. I haven't had success with using the popular rooting software because they do not support my version. So i am looking to revert back to kitkat and then to graviton. But, before i can revert back to kitkat i need the firmware file, and the place i went to had all but my phones model
Have i hit a dead end until lolipop works with a root program?
Thanks for the time. CraigK
Hi, thank you for using XDA Assist. You can flash back to nb1. See this ,http://forum.xda-developers.com/showthread.php?t=2616221. Also see this, http://forum.xda-developers.com/galaxy-s4-att. All your questions can be answered there. Don't forget to register on XDA to post questions in that forum.
Thread closed
Hello. I am currently using an htc one m8 harman ikardon edition which i unlocked. I tried to download the ViperOneM8 4.6.0 rom. I backed up, wiped data and installed the rom. It referenced me to a page where there were the roms terms and stuff. I accepted and tapped next but a message popped up which said that sprint is not supported for the rom, although i have unlocked my phone and have been using it for a while in another rom. Was wiping the data the problem? What should i do? If there is nothing i can do can you suggest roms that could accept sprint but could operate unlocked? Please help[/SIZE][/SIZE]
RomsRock said:
Hello. I am currently using an htc one m8 harman ikardon edition which i unlocked. I tried to download the ViperOneM8 4.6.0 rom. I backed up, wiped data and installed the rom. It referenced me to a page where there were the roms terms and stuff. I accepted and tapped next but a message popped up which said that sprint is not supported for the rom, although i have unlocked my phone and have been using it for a while in another rom. Was wiping the data the problem? What should i do? If there is nothing i can do can you suggest roms that could accept sprint but could operate unlocked? Please help[/SIZE][/SIZE]
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the Sprint HTC One (M8) at http://forum.xda-developers.com/sprint-htc-one-m8 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/sprint-htc-one-m8/help where the experts familiar with your device will be best able to guide you. I see that you also already tried in the general forum at http://forum.xda-developers.com/showpost.php?p=62693109&postcount=27505, but perhaps you shoudl ask in the ROM thread whether that ROM is designed to be compatible with the Sprint model.
Good luck!
This thread is closed.
Hi, not sure if this has been posted before or if I have posted in the wrong section so apologies if I may have.
Okay so I rooted my s8+ a few months ago and I decided yesterday that I want to unroot so I flashed a stock firmware. I found on updato, the version which I believed would be mine (SM-G955F, XEU version) as I purchased my s8+ in the UK unlocked. Anyway it all flashed fine but my device recognises the firmware as official but many apps (natwest, barclaycard, android pay Samsung pay) still say that it is rooted, unlocked bootloader etc. I disabled OEM but there is still no effect. Is there a way I can make my device recognise itself as genuine and not rooted etc without having to actually root it as some apps still do not work after rooting with magisk and twrp even though android pay does? Also now there are apps which I can not download from the app store such as netflix. PLEASE HELLP!! (I know I can download the apks but I want my phone to be as it was again) Its driving me insane, I just want everything back to normal as if I just purchased my s8+ brand new and have no modifications. (this is the last time I'm rooting a phone)
THANK YOU VERY MUCH IF YOU HAVE A SOLUTION!!
Lehri97 said:
Hi, not sure if this has been posted before or if I have posted in the wrong section so apologies if I may have...
Click to expand...
Click to collapse
I don't have this device but, the following thread should be helpful for what you are looking for.
https://forum.xda-developers.com/showthread.php?t=3582175
If all else fails in the above thread, then your best bet is to post this question within the following thread.
https://forum.xda-developers.com/showthread.php?t=3586299
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hi guys!
I'll start this as I do many posts...but apologies if this is in the wrong place or if the questions have already been answered....
Been a while since my last post but I am a long time member and still in the phone game. Over the years I've had to focus on other areas of my life as time has gone by but I still find time to tinker on occasion. If there is a thread that adequately answers these questions please link it in the response. But again, so far, I have not been able to find the answers I need. I am about to install SafeStrape on the device anyway but thought I would throw out a line in hopes of getting a bite.
With that said, I have scoured the forums looking for a definite answer. From what I can gather it appears that if you have the 4.4.2 OTA update that you cannot unlock your bootloader....ever.
Is this the truth?
Can I downgrade to an earlier FW such as 4.1.1, etc?
If so, can I then use SafeStrape or will I even need to?
The reasons behind these questions is to determine if I will be able to root this beast or not? I am unsure what the original FW was on the device or if it came with 4.4.2 on it. I mention this as I cannot remember if you can downgrade if your device never had the older version of the FW you wish to downgrade to on it sometime in the past. Can someone verify if this is true as well please?
Thanks in advance all!!
PAinguINx said:
Hi guys!, I'll start this as I do many posts...but apologies if this is in the wrong place or if the questions have already been answered....
Click to expand...
Click to collapse
It's impossible to downgrade any of the firmware versions for the d2vzw device. The Knox within the devices bootloader will prevent this from ever happening.
If any attempts are made to do this, you will take the chance at Soft/Hard Bricking your device (or even worse).
The versions "at & below" Android v4.3.0 AND the Firmware version "I535VZWCML1" CAN be unlocked.
Any versions "at & above" Android v4.3.0 AND the Firmware version "I535VZWCNC1" CANNOT be unlocked.
SafeStrap = NOT a Custom Recovery. It's only designed/themed to LOOK like TWRP because of its familiar look and such.
TWRP = Custom Recovery. This replaces the stock recovery.
I hope that I had clarified this okay via text...
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX2 Forum App on my Sanyo Juno device.
Thank you my friend!!
Ibuprophen,
Thank you for the info... It has been a long time since I have done anything with an S3, particularly a VZW S3. Btw, I've used a lot of the times you have hosted so thanks for those too.
Before I posted my thread I flashed a semi stock f/w with SU added. But the device went into the "Verizon has detected non approved software on this device, blah, blah, blah.".
I was able to flash the appropriate stock FW via Odin and got out of the aforementioned loop.
But anyway, you answered my questions brother . I appreciate your time and effort.
Have a good day!!!
Regards,
PAinguIN
PAinguINx said:
Ibuprophen, Thank you for the info..........
Click to expand...
Click to collapse
Your very welcome![emoji106]
I have 2 d2vzw devices (with 1 of them that has an Unlocked Bootloader) and, though I don't use them as my primary device, I still use them for testing purposes (ie... my developments and such) but, their still a decent device to use when necessary.
Enjoy!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX2 Forum App on my Sanyo Juno device.