Since the phone is now metal/glass, not sure what kind of metal its made out of. Will a magnetic car mount work on the back of the phone? How about with a case without adding a metal stick on piece?
weightlifter63 said:
Since the phone is now metal/glass, not sure what kind of metal its made out of. Will a magnetic car mount work on the back of the phone? How about with a case without adding a metal stick on piece?
Click to expand...
Click to collapse
The phone works great with a magnetic car mount. I have one that connects to the air vents in my car, and the phone works perfectly. If you add a case to it, however, the hold is pretty weak, so you may need to add something between the phone and the case. I have tried two thin cases, and the hold is still enough for me, but my mount does have two feet at the bottom to help ensure the phone doesn't fall. I don't think it will work for a think case without adding something. Let me know if you have any further questions.
Car mount attached to the air vents? Sounds nice if you have the AC on, but what about when you need to use the heat? Wouldn't that overheat the phone?
SwordOfWar said:
Car mount attached to the air vents? Sounds nice if you have the AC on, but what about when you need to use the heat? Wouldn't that overheat the phone?
Click to expand...
Click to collapse
This is something I will need to consider in the winter, but I am in AZ so using the heat doesn't happen often...heat in the summer is much more of a concern
I read that magnets will mess up the spen functionality.
SwordOfWar said:
Car mount attached to the air vents? Sounds nice if you have the AC on, but what about when you need to use the heat? Wouldn't that overheat the phone?
Click to expand...
Click to collapse
In the winter, just close that specific vent. [emoji12]
Sent from my SM-N920V using Tapatalk
Proclip rocks. Usually those are on a vent. I have used them for years. They never blow heat badly enough to affect the phone; when they are blowing hot air, the car is cold inside anyway, so the phone is cold too.plus there are many other vents blowing warm air at that point, so the car warms up and then you turn down the heat anyway.
Only messes with s-pen while connected to magnetic mount. Doesn't damage anything.
I saw a post where someone was no longer able to draw on one part of the screen and that is where the magnet from the front flap sit when the case is closed...
KruseLudsMobile said:
I saw a post where someone was no longer able to draw on one part of the screen and that is where the magnet from the front flap sit when the case is closed...
Click to expand...
Click to collapse
Any more information on this? I plan to use my phone with a magnetic mount.
I have the same issue with a case with a magnet. I guess the phone is so thin it effects the screen, or the magnet effects the s-pen
killerz298 said:
Any more information on this? I plan to use my phone with a magnetic mount.
Click to expand...
Click to collapse
If you use a mount like a steelie that has the magnet on attached to the phone, that will cause an issue. If you use one of the magnet mounts that you just put the metal plate on the back of the phone you are fine. Just remember that when attached to the mount, where ever that magnet is, your S-Pen will not write.
Gargamel198024 said:
If you use a mount like a steelie that has the magnet on attached to the phone, that will cause an issue. If you use one of the magnet mounts that you just put the metal plate on the back of the phone you are fine. Just remember that when attached to the mount, where ever that magnet is, your S-Pen will not write.
Click to expand...
Click to collapse
So there won't be any permanent damage from the magnet? It will just make the s pen not work when attached?
killerz298 said:
So there won't be any permanent damage from the magnet? It will just make the s pen not work when attached?
Click to expand...
Click to collapse
No, once the magnet is removed it will work perfectly.
Look up air dock. Pretty much the only one of its kind.
Natelugo said:
Look up air dock. Pretty much the only one of its kind.
Click to expand...
Click to collapse
That looks like a cool product. Does it work with the Note5 WITHOUT putting the magnetic sticker on the back of the phone? I am looking for a solution that works with the metal of the phone directly. I was using the original version of http://www.amazon.com/gp/product/B00DPMNNUO/ref=cm_cr_notf_fhv_prd with my GS4 but had the metal plate inside the case so it stuck great The mount has a small round part with 4 tiny magnets in it but that isn't enough to hold the Note5 directly. I think it is the reduced surface area on the mount that might be causing the issue.
Is there any double sided magnet thing I can stick to the phone and then to the mount that can easily be taken on and off when in the car that would strengthen the bond with my current mount?
It sticks real good to the back of the note 5. I have a bumper so the back is exposed. On top of the magnets it has a sticky membrane.
Natelugo said:
It sticks real good to the back of the note 5. I have a bumper so the back is exposed. On top of the magnets it has a sticky membrane.
Click to expand...
Click to collapse
Thanks for the info. It is good to know I have a backup option if I can't get my current mount to hold the Note. I really didn't want to pay another $16 for a new mount so I'm trying to figure out how to increase the magnetism of my current one without having to put a sticker magnet on this phone which is why I was looking for some double sided magnet solution. Perhaps the magnetic plate with the sticker on it will magnetize to the phone without undoing the sticker? I guess I should try that first.
KruseLudsMobile said:
I read that magnets will mess up the spen functionality.
Click to expand...
Click to collapse
They do, I have had to get customers to remove the mounts many times because their spen was not working.
Little quark with magnetic mounts: It seems the metal will block NFC transmissions. I had to remove my case to use Android Pay yesterday.
Perhaps better placement of the metal piece would fix that issue though. But something to keep in mind if you use NFC a lot.
Related
Hi everyone,
I am waiting for my S5 to come within a few days and in the meantime I'm browsing around in a search for a car mount. I came across this one on amazon:
http://www.amazon.com/Mountek-nGroo...sim_cps_1?ie=UTF8&refRID=0A24M5KGJ6GW57GE14ZT
It says it's cradle-less, and there it holds on a magnet. I have never used this type of mounts before, so I am a bit concerned about magnets affecting the phone's performance.... Any insight (or suggestions) are greatly appreciated.
Also, I saw another one like that, but there is a metal insert that has to be put under the back cover. Do you think it will affect the water/dust seal?
Thank you
Lohmatiy said:
Hi everyone,
I am waiting for my S5 to come within a few days and in the meantime I'm browsing around in a search for a car mount. I came across this one on amazon:
http://www.amazon.com/Mountek-nGroo...sim_cps_1?ie=UTF8&refRID=0A24M5KGJ6GW57GE14ZT
It says it's cradle-less, and there it holds on a magnet. I have never used this type of mounts before, so I am a bit concerned about magnets affecting the phone's performance.... Any insight (or suggestions) are greatly appreciated.
Also, I saw another one like that, but there is a metal insert that has to be put under the back cover. Do you think it will affect the water/dust seal?
Thank you
Click to expand...
Click to collapse
Wrong link?
I have this one http://www.amazon.com/iMagnet-Cradl...&qid=1397234384&sr=1-1&keywords=imagnet+mount
...and i freaking love it for the note 2. Magnet is the only way i can go for car mounts now. If you don't care about wireless charging, the metal plate has no impact (in my experience) on the phone and is thin enough to sit right between the battery cover and the battery, at least on the note 2. I'm actively investigating options for a magnet mount with the S5, although i need wireless charging and the two don't get along (can't have metal between the phone's coil and the charging pad).
I have this one and I'll never buy anything different. Super small, super strong, and it looks sharp.
http://www.amazon.com/Nite-Ize-STCK...=sporting-goods&ie=UTF8&qid=1397235310&sr=1-1
That is all.
tdrussell said:
Wrong link?
I have this one http://www.amazon.com/iMagnet-Cradl...&qid=1397234384&sr=1-1&keywords=imagnet+mount
...and i freaking love it for the note 2. Magnet is the only way i can go for car mounts now. If you don't care about wireless charging, the metal plate has no impact (in my experience) on the phone and is thin enough to sit right between the battery cover and the battery, at least on the note 2. I'm actively investigating options for a magnet mount with the S5, although i need wireless charging and the two don't get along (can't have metal between the phone's coil and the charging pad).
Click to expand...
Click to collapse
Thank you for the reply. It helps.
Yes, my bad - the link was to the Cradle version. You had to click on "snap" rectangle on the page. My mistake. And that's what I ordered for now... (snap version)
Also, i came over this thing in another thread and it seems to be exactly what we are looking for. the only problem - it IS pricey) and it won't ship until end of May at least. (wireless charger and magnet mount at the same time).
http://www.theairdock.com/
e_town said:
I have this one and I'll never buy anything different. Super small, super strong, and it looks sharp.
http://www.amazon.com/Nite-Ize-STCK...=sporting-goods&ie=UTF8&qid=1397235310&sr=1-1
That is all.
Click to expand...
Click to collapse
Thank you. I saw this one on Amazon today. Is it glued on to the dashboard? Can you detach it? I don't want any glue leftovers in a leased car...)
I have the imagnet. Used for my s3 between the phone and uag case. I love quick access to the phone on and off the mount. I just got my s5 but won't be in my truck til Monday to test it, but I don't foresee any problems.
I thought about a magnet mount for a while.
Car mounts should be simple, and quick. But most require you to either use 2 hands, and some 2 step process. Or you have to buy one that works quickly, but only without a case.
Then I found this DashCrab Duet
Sticks like glue, and easy one handed operation. The price is more than those cheap'o cradles, but much less than the high end ones. I've never been happier with a car mount.
tetrex clips on the vent... uses 4 small neodium megnet...
http://www.amazon.com/Tetrax-72003-...e=UTF8&qid=1397342935&sr=8-11&keywords=tetrax
i'm not about to "Stick" anything to my fancy car. I have the mountek, and stopped using it. it sticks out so much from the cd drive, and gs350 has a funny looking CD drive that didn't play nicely with mountek.
I should mention that the Dash Crab, sticks very well, but it is just a suction cup, no adhesive.
http://www.scosche.com/magicmount
this one looks promising. I might get it if I can find a nice spot in my car to place it
Just reporting back on the imagnet mount with my s5. Works just like it did with my s3. Slid the little piece of metal between the cover and phone and it pops right on. Should note that the imagnet has one of those awesome suction cups that doesn't fail. Mine has been stuck on my dash since I bought it and never came off even through temperature swings. GPS isn't affected either.
https://www.indiegogo.com/projects/the-air-dock/x/4205378
http://www.theairdock.com/
Ignite023 said:
https://www.indiegogo.com/projects/the-air-dock/x/4205378
Click to expand...
Click to collapse
Unfortunately the air dock is probably a non-starter for the S5:
How does the micro suction foam work?
The micro suction foam face is pretty cool. Imagine a whole bunch of tiny little suction cups. That's what we have used to hold phones to the Air Dock. Full size suction cups need a smooth glossy surface to stick to. Similarly the micro suction foam needs a smooth glossy phone to hold onto.Any phone with a glossy back will stick great to the micro suction foam. If your phone isn't glossy on the back, then it's just a simple matter of putting it in a case that is smooth and glossy.
tdrussell said:
Unfortunately the air dock is probably a non-starter for the S5:
How does the micro suction foam work?
The micro suction foam face is pretty cool. Imagine a whole bunch of tiny little suction cups. That's what we have used to hold phones to the Air Dock. Full size suction cups need a smooth glossy surface to stick to. Similarly the micro suction foam needs a smooth glossy phone to hold onto.Any phone with a glossy back will stick great to the micro suction foam. If your phone isn't glossy on the back, then it's just a simple matter of putting it in a case that is smooth and glossy.
Click to expand...
Click to collapse
That's an outdated description. The suction is backed by magnets:
The face of the Air Dock is a micro suction foam that holds your phone in place. Inside the Air Dock are magnets that pull the phone tightly into the foam face. The qi wireless charger is built into the dock. Any phone that supports Qi charging will automatically charge once placed on the Air Dock
Click to expand...
Click to collapse
http://www.theairdock.com/pages/faq
Ignite023 said:
That's an outdated description. The suction is backed by magnets:
http://www.theairdock.com/pages/faq
Click to expand...
Click to collapse
i kinda have a thing for magnets. I'm sitting here with my S5 and an N52 neodymium magnet that will hold 6.5 lbs. There is not a place on the back of the S5 that it will stick strong enough to resist a light shake of the device. He mentions the N5 and N7 so it may work with those devices (since they were orignially designed to work with the official nexus magnetic Qi charger) but i do not see any way for this work with the S5.
tdrussell said:
i kinda have a thing for magnets. I'm sitting here with my S5 and an N52 neodymium magnet that will hold 6.5 lbs. There is not a place on the back of the S5 that it will stick strong enough to resist a light shake of the device. He mentions the N5 and N7 so it may work with those devices (since they were orignially designed to work with the official nexus magnetic Qi charger) but i do not see any way for this work with the S5.
Click to expand...
Click to collapse
I used to use the iMagnet mount in my car and it came with a really thin circular piece of metal that was meant to be stuck on the outside of your phone's back cover. I took it and instead stuck it to the inside of the back cover - it holds extremely well. I used it on the S4 and now the S5. If you use a case then you can just stick it on the back cover between the case and the phone. I don't use a case and didn't want that to take away from the devices appeal.
Ignite023 said:
I used to use the iMagnet mount in my car and it came with a really thin circular piece of metal that was meant to be stuck on the outside of your phone's back cover. I took it and instead stuck it to the inside of the back cover - it holds extremely well. I used it on the S4 and now the S5. If you use a case then you can just stick it on the back cover between the case and the phone. I don't use a case and didn't want that to take away from the devices appeal.
Click to expand...
Click to collapse
Oh definitely, i have an iMagnet mount as well. The tricky part is that you can't put ferrous metals inside an induction field. Not only will it disrupt the induction field, they get hot. So, in order to incorporate both magnets and inductive charging into a solution, you need to have the magnets placed outside the plane of the induction field on the Z axis or, or around the outside of the field in the Y axis (assuming induction field is on the Z plane).
At one point i decided if i had to choose between iMagnet and Qi, i picked Qi. Then i decided i wanted both - so i made my own mount using small neodymium magnets at the 4 corners of the backplate of my note 2 and cannibalized an old ball-socket car mount, made a new plate, and adhered 4 matching magnet's to a flat plate to mate the phone to. So you CAN have your cake and eat it too, the implementation is just a little tricky.
tdrussell said:
Oh definitely, i have an iMagnet mount as well. The tricky part is that you can't put ferrous metals inside an induction field. Not only will it disrupt the induction field, they get hot. So, in order to incorporate both magnets and inductive charging into a solution, you need to have the magnets placed outside the plane of the induction field on the Z axis or, or around the outside of the field in the Y axis (assuming induction field is on the Z plane).
At one point i decided if i had to choose between iMagnet and Qi, i picked Qi. Then i decided i wanted both - so i made my own mount using small neodymium magnets at the 4 corners of the backplate of my note 2 and cannibalized an old ball-socket car mount, made a new plate, and adhered 4 matching magnet's to a flat plate to mate the phone to. So you CAN have your cake and eat it too, the implementation is just a little tricky.
Click to expand...
Click to collapse
Ah ok, I wasn't aware of that. Although, to be honest - I used to let my GS4 charge all of the time with no issues.
http://www.ebay.com/itm/Armor-Luxur...or-Samsung-Galaxy-Note-4-SMN910-/121482318009
go for iOttie they have good product especially universal car mount
Personally, with a case like that I'd be looking at a magnetic mount. I'm currently using the Bracketron Si Earth Elements mount and I absolutely love it. I've got the S-View cover on mine so I had to put a metal plate under the battery cover to get the magnet to hold, but that case may work just on it's own. Just my .02, but I'd definitely at least give a magnetic mount a try.
With that case, I'd be more worried about whether I'd get a signal.
soul777toast said:
Personally, with a case like that I'd be looking at a magnetic mount. I'm currently using the Bracketron Si Earth Elements mount and I absolutely love it. I've got the S-View cover on mine so I had to put a metal plate under the battery cover to get the magnet to hold, but that case may work just on it's own. Just my .02, but I'd definitely at least give a magnetic mount a try.
Click to expand...
Click to collapse
I used the Rokform case on all my iphones, ipads etc. I notice they make a case, with magnet for the S5 but none for the Note .. BUT .. they do make an adapter that sticks to the back of your phone case that includes a powerful magnet. I bought one to use with a Lumia and I am going to see if they are still available so I can use it with my Note. (arriving monday.) Here is the adapter.
shEEEsh said:
I used the Rokform case on all my iphones, ipads etc. I notice they make a case, with magnet for the S5 but none for the Note .. BUT .. they do make an adapter that sticks to the back of your phone case that includes a powerful magnet. I bought one to use with a Lumia and I am going to see if they are still available so I can use it with my Note. (arriving monday.) Here is the adapter.
Click to expand...
Click to collapse
That looks really interesting. The only problem for me is that I use the S-View cover and I really like it, so having the attachment hardware protrude from the back of the phone doesn't work in my case. What I like about the Bracketron I use is that the magnet in it is strong enough to hold through the S-View cover when it's flipped around to the back. I just had to put some metal under the battery cover to give the magnet something to grip, the shape of the plates that were included didn't fit very well so I ended up just using a couple pieces of scrap steel I found at work. This way there isn't anything stuck to the outside of the phone so it looks completely normal, there's no bulge on the back and no pieces stuck on with tape or anything, and when I drop it in the mount I can leave the S-View cover flipped around to the back so it's not hanging down getting in the way or anything. The magnet holds very well through the S-View flap and the battery cover, and there's feet that flip out from the mount for the phone to rest on so the magnet really only needs to hold the phone horizontally, which works great with a phone this heavy. It ends up being pretty rock solid, I've never had the phone fall out even going over some pretty serious bumps and potholes.
In any case the Rokform does look like an interesting option if you don't use the S-View cover, if I ever decide to switch I'll have to look into it. I almost wonder if you could combine the Rokform with a Qi pad to make some kind of homebrew magnetic Qi dock... I'll have to look into that
if you have no problem with aircon vent mount, you can look for something like "spiderpodium", i bought the china knockoff one, they are great because of flexibility, i still using the same one even after changing phone or case.
I would love to see some "Real" pictures of this case.
I have supcase unicorn beetle pro, what mount should i get
I second the magnet mount. I personally use the iMagnet. It's the only magnet version I've personally tested but I did a ton of research on it and found that it had the strongest magnet and also the 'sticky base' which allows it to mount to curved or bumpy surfaces. I have it mounted to the side of my cars instrument cluster dash cover at around 2o'clock, same curve as the steering wheel. This way I don't have to take my hand off the wheel to press the screen.
I'll also chime in and give a +1 to magnetic mounts. As I mentioned earlier in this thread I personally use the Bracketron Si Earth Elements mount, I absolutely love it. Really fantastic mount, super strong magnets in it (stronger than other magnetic mounts I've tried) and it also has little adjustable feet that flip out at the bottom to help support the phone, which for a device as big (and heavy!) as the Note 4 is extremely helpful. It's proven to be a very solid setup for me, I've been using it for at least a month now and my Note 4 hasn't fallen or dropped a single time, actually it barely budges even when I've gone over some serious bumpy roads and potholes.
I'll also say that the Rokform magnetic mount that was posted earlier in this thread looks pretty interesting as well. It won't work for me because I use the S-View cover, but with any normal case it should work with no problem and it definitely looks like a very good system.
Just a few questions with regards to this case. Firstly, I dont see any speaker cut outs on the back of this case? Is the speaker volume muffled by this? Also, how is the mic quality when talking with someone on the phone? Are the two tiny holes on the bottom good enough for sound to flow through flawlessly? And finally, how is your signal strength while the phone is in this case?
soul777toast said:
I'll also chime in and give a +1 to magnetic mounts. As I mentioned earlier in this thread I personally use the Bracketron Si Earth Elements mount, I absolutely love it. Really fantastic mount, super strong magnets in it (stronger than other magnetic mounts I've tried) and it also has little adjustable feet that flip out at the bottom to help support the phone, which for a device as big (and heavy!) as the Note 4 is extremely helpful. It's proven to be a very solid setup for me, I've been using it for at least a month now and my Note 4 hasn't fallen or dropped a single time, actually it barely budges even when I've gone over some serious bumpy roads and potholes.
I'll also say that the Rokform magnetic mount that was posted earlier in this thread looks pretty interesting as well. It won't work for me because I use the S-View cover, but with any normal case it should work with no problem and it definitely looks like a very good system.
Click to expand...
Click to collapse
Hijacking the thread... anyone know if this would inhibit the use of the note 4 edge? This case looks pretty awesome...
First words out of my mouth when I saw pictures of the case were literally "WHY WOULD YOU DO THAT!" as in, why would anyone smother their phone with that monstrosity. It doesn't even look nice and I'm willing to bet that it absolutely kills signal. I have the Iron Shield which only has aluminum around the sides and I have to take it off to use GPS... It's almost impossible to get a good lock with it on... I can't even imagine what this case would do to my phone.
If you have a CD slot, I suggest giving one of the Koomus CD slot mounts a try. They have various clip and magnet versions. I personally prefer CD slot mounts over air vent/windshield/dash mounts.
Just curious if anybody is using a magnetic car mount with their S6. If so, how are you attaching the metal plate in the phone? I used to just put it between the phone and a phone case, but this isn't working so great for the S6 because it interferes with the wireless charging. Is there any way to have the best of both worlds? Interestingly enough, the phone sticks to a magnetic mount out of the box, but the connection feels a little weak to me.
What are your thoughts?
edit
I'm using one with mine, no need to install anything on the phone it just works.
maxjivi05 said:
I'm using one with mine, no need to install anything on the phone it just works.
Click to expand...
Click to collapse
What are you using? I'm researching this solution also. Is it a wireless charging dock?
Nope just a magnetic mount from walmart.
I have an iMagnet mount. With my S4, I put a disc between the phone and case for the magnet to hold. The disc, of course, interferes with wireless charging on the S6. The metal body of the S6 is enough for the magnet to hold it without a disc, but the glass back of the S6 is not grippy enough and the phone slides right off the magnet. I have a case coming today that I hope will provide enough grip for the magnet to hold the phone without a metal disc. If not, I might try cutting the disc down to a smaller size and see if I can get your best of both worlds.
I got this at Walmart yesterday and it works great, http://mobile.walmart.com/ip/Scosche-Magnetic-Dash-Mount/37699955
Would it work If i have a case around my phone? using a pure gear - Dualtek case.
Appok said:
Would it work If i have a case around my phone? using a pure gear - Dualtek case.
Click to expand...
Click to collapse
It works with this case, http://www.amazon.com/gp/product/B00T6RS1B8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
ledvedder said:
It works with this case, http://www.amazon.com/gp/product/B00T6RS1B8/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Hmm okay that looks a little bit thinner then my case.
What i am using at the moment:
http://www.pure-gear.com/shop-by-de...xtreme-shock-case-for-samsung-galaxy-s-6.html
I guess the only way to find out is tonight, when I pick-up my wireless charger if it even charges through the case. If it does then maybe the magnet will work.
With a Spigen Ultra Hybrid case on my phone, it provides enough grip against the iMagnet mount with the phone's metal body to hold the phone in place on the mount. It stayed put the whole drive to work today (~15 miles) and only tilted slightly.
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
cveez11 said:
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
A few members in the Dbrand thread have put their metal plate behind their vinyls, and subsequently used they're magnetic mounts. They reported no problems whatsoever, and so I plan to do the same.
Sent from my Nexus 6P using Tapatalk
I'm using an aukey vent mount. It works great with no issues.
Sent from my Nexus 6P using Tapatalk
cveez11 said:
I have read through the car mount thread, but am interested specifically in a magnetic mount. Wondering if anyone has been using one. Does it turn the screen off etc.? Anyone using, or that has tried one, please provide feedback. Thanks in advance for any info.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I have the magnetic plate behind my case and the main magnet in my vent. The other day my gyroscope got stuck and all my photos were upside down. It's apparently common and all you have to do is tap the back of the phone. The magnet does not turn the screen on or off.
http://forum.xda-developers.com/nexus-6p/help/pictures-upside-t3246925
I use a magnetic mount and it works beautifully.
I have a Scosche magnetic car mount and a Spigen Rugged Armour case. I placed the larger metal plate inside my case with the adhesive to the inside of the case (not phone) and it works very well. Has not fallen. I have not had any issues with signal, GPS, phone turning off, orientation, etc. Have not tried NFC to be honest though.
I used a magnetic car CD mount without any issues. I was able navigate with Google Maps.
I duct-taped the metal plate to the inside of my Adopted case.
This is the mount I am using:
http://www.amazon.com/gp/product/B00V54LQO4?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00
I'm using a Koomus Magnetos mount with a magnetic plate taped to the inside of my Speck Candyshell Grip case (and my thinner Diztronic case). No issues affecting phone performance at all.
I stopped using my magnetic car mount on my note 4 because I noticed my 4g lte speeds (I'm on verizon) went down with the magnet. Haven't tried it with the 6p but will test it out.
LuckyDragan said:
I'm using a Koomus Magnetos mount with a magnetic plate taped to the inside of my Speck Candyshell Grip case (and my thinner Diztronic case). No issues affecting phone performance at all.
Click to expand...
Click to collapse
Does the plate do any noticeable bump on the case?
I got this one https://www.amazon.com/gp/aw/d/B00VKMRR9E/ref=yo_ii_img?ie=UTF8&psc=1
Very happy with it. Holds well and doesn't affect the phone at all. Stuck the metal plate inside my rinke case and have not had any problems.
Sent from my Nexus 6P using Tapatalk
There is something about the whole magnet / electronic device thing that bothers me...
thedude420 said:
There is something about the whole magnet / electronic device thing that bothers me...
Click to expand...
Click to collapse
I feel ya, bro. It seems just as untrustworthy as that hoe Sally Rottencrotch who lives in the next building and wants to show you her kitty . . . there's a voice inside your head saying "Don't do it man, she's dirty". A magnetic mount sounds like it would be asking for our expensive ass phone to go flying after the first big pothole you hit. I was looking into a car mount a few weeks ago and found this: The Best Smartphone Car Mount.
After researching the options for ten hours, surveying more than 1,000 Wirecutter readers, and testing about thirty models, the smartphone car mount we recommend for most people is TechMatte’s MagGrip CD Slot ($11). Although it may not be what you’d envision when you think of a car mount, the MagGrip CD Slot proved to be a simple, compact, and affordable option that’s a great fit for most cars. Compared to the other models we tested, the style allows for the easiest insertion, removal, and repositioning and does not sacrifice a secure hold. It also places the phone at an ideal position that doesn’t block your view of the road.
Click to expand...
Click to collapse
It's incredibly thorough and well-reasoned, and by the end I had no logic with which to argue it. Mine will be in Tuesday.
cabbieBot said:
I feel ya, bro. It seems just as untrustworthy as that hoe Sally Rottencrotch who lives in the next building and wants to show you her kitty . . . there's a voice inside your head saying "Don't do it man, she's dirty". A magnetic mount sounds like it would be asking for our expensive ass phone to go flying after the first big pothole you hit. I was looking into a car mount a few weeks ago and found this: The Best Smartphone Car Mount.
It's incredibly thorough and well-reasoned, and by the end I had no logic with which to argue it. Mine will be in Tuesday.
Click to expand...
Click to collapse
lol, 10-4 on Sally. My main concern was mostly the fact of having a "strong magnet" directly touching my device or case. NAND, sensors, processors, etc... all concern me when it comes to strong magnetic fields :/ Maybe I will buy one for my wife and test it out on her device first
thedude420 said:
lol, 10-4 on Sally. My main concern was mostly the fact of having a "strong magnet" directly touching my device or case. NAND, sensors, processors, etc... all concern me when it comes to strong magnetic fields :/ Maybe I will buy one for my wife and test it out on her device first
Click to expand...
Click to collapse
There's really nothing to worry about.
I have (as well as many others) been using magnetic holders for years now.
It's no longer an issue since there aren't any devices with spinning discs.
I wouldn't worry about the phone flying off the mount either if you have it attached properly.
I've taken my previous car to the track multiple times and it held on fine.
brandaopj said:
Does the plate do any noticeable bump on the case?
Click to expand...
Click to collapse
Baaaarely imperceptibly. Since the entire inner layer is silicone, it's quite accommodating, especially since the back plate is less than 1 mm thick.
LuckyDragan said:
Baaaarely imperceptibly. Since the entire inner layer is silicone, it's quite accommodating, especially since the back plate is less than 1 mm thick.
Click to expand...
Click to collapse
i have a magnetic one that i had for my other phone that was already in my car. being on project fi, i got onto project fi chat help and asked about the magnetic car holders. the rep told me that while they had no data to support or not support it for the 6P, they would recommend not doing it due to the way the GPS and battery are positioned in the phone. take that for what it is worth for you...
Was tinkering with a magnetic car mount today and noticed that if the magnet touched the bottom back of the phone (right by the USB port) the screen turns on.
Any one have an idea why that would happen? Found it interesting, since that's not normally where the magnet will contact I'm not worried, but curious if any one knows what's being tripped.
rbrenart said:
Was tinkering with a magnetic car mount today and noticed that if the magnet touched the bottom back of the phone (right by the USB port) the screen turns on.
Any one have an idea why that would happen? Found it interesting, since that's not normally where the magnet will contact I'm not worried, but curious if any one knows what's being tripped.
Click to expand...
Click to collapse
Built in feature to activate the screen if a special case is used, notably the ones with a flap on the front cover. Once the front cover is flipped open, screen is automatically turned on to welcome you. You can trigger the same thing you witnessed by placing the magnet on the screen side, near the bottom. Magnet comes close, screen locks. Magnet moves away, screen activates. Same feature on a lot of other devices from years past actually, such as OG nexus 7 and whatnot.
Don't know if it applies to the 6p, but the OG moto droid had a dock that used a magnetic that automatically launched "car mode" when docked to the magnet.
Sent from my Nexus 6P using Tapatalk
I have one, got it on Amazon for like 8 bucks shipped. The metal disk that goes on to your phone is not magnetized, just metal so that it sticks to the magnetic base- so you don't have to worry about carrying the magnet around all day and erasing the credit cards in your pocket, etc...
Haven't noticed any effect on the sensors when attached, and I use GPS everyday. You would think it would mess up the compass, but I guess I don't use it while attached...
Sent from my Nexus 6P using Tapatalk
Hey i have the spigen neo hybrid ex and just wanted to let ppl know if they're wondering. It works with fine with the magnet car docks. I've put the plate in between the case and phone.
Sent from my Nexus 6P using Tapatalk
I'm about to order the Essential. Along with it I'd like to order a CD mount holder for the car. I'm considering the following 3:
NOPNOG Car Mount Cell Phone Holder for Car CD Slot
BOOCOSA CD Slot Holder
Mpow Car Phone Mount,CD Slot Car Phone Holder
Does anyone use any of these? My main concern is that the side clamps not cover the power and volume buttons and that the bottom shelf not interfere with charger use. Thanks in advance.
I use Koomus CD-Air Tab CD Slot mount and it works perfectly. Phone is held on top and bottom, not the sides. And there's an opening on the the bottom for charging cable.
thwrtchd said:
I use Koomus CD-Air Tab CD Slot mount and it works perfectly. Phone is held on top and bottom, not the sides. And there's an opening on the the bottom for charging cable.
Click to expand...
Click to collapse
Thanks for your response. Are you using the tablet version? How secure is the "One Touch Lock Lever"; is it tight?
Yes, it's a tablet version, but the phone fits perfectly, used it with my previous HTC M9 too.
No issues with lock lever, I don't think I ever touched it since I installed it two years ago.
I also used to use a Koomus. I had the one for the phone. It's good quality.
https://www.amazon.com/gp/product/B00HRKI5V2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
recently I switched to this Spigen mount with magnet. Of course this requires a case. The metal plate is placed inside the case. For me this is the best solution as I can just pick the phone when I need it and not fiddle with the clamp holder. The phone is pretty heavy but I never had problems with it moving even with really bad roads and bumps.
https://www.amazon.com/gp/product/B01GERTHO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Hope you enjoy your PH-1 as much as I do.
cheers
It would be nice for a manufacturer to make one specifically for the Ph1 to take advantage of the charging connects on the backside. I won't hold my breath.
Hell, it would be nice if Essential came out with the wireless desk charger they've been promising too!
I used this Koomus Magnetos CD Magnetic mount and I've had it for years. Absolutely love it. I use it with my Essential Phone with the Tudia case and have no issues whatsoever with the magnet being strong enough. Great hold. My only issue is the screw on the bottom tends to block the CD Dash screen which has the clock and volume level if I want to see it.
There is a newer version that improves on the device and eliminates the screw blocking the screen issue. I highly recommend these magnetic CD mounts.
derausgewanderte said:
I also used to use a Koomus. I had the one for the phone. It's good quality.
https://www.amazon.com/gp/product/B00HRKI5V2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
recently I switched to this Spigen mount with magnet. Of course this requires a case. The metal plate is placed inside the case. For me this is the best solution as I can just pick the phone when I need it and not fiddle with the clamp holder. The phone is pretty heavy but I never had problems with it moving even with really bad roads and bumps.
https://www.amazon.com/gp/product/B01GERTHO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Hope you enjoy your PH-1 as much as I do.
cheers
Click to expand...
Click to collapse
For the Spigen mount. Does it interfere with the NFC functionality? How big is the metal plate? Can it be turned sideways so that it does not extend too far from the finger print reader? (I think the NFC is at the bottom of the phone).
thanks,
manderson8898 said:
For the Spigen mount. Does it interfere with the NFC functionality? How big is the metal plate? Can it be turned sideways so that it does not extend too far from the finger print reader? (I think the NFC is at the bottom of the phone).
thanks,
Click to expand...
Click to collapse
Need to test this to be 100%, but never had problems so far. Only used nfc a few times. The NFC is at the very bottom of the phone, the metal plate is closer to the finger print reader, correct. It should not interfer.i will test tonight when home.
edit1: tested with some tags I had around and it works without a problem. That also reminded me that I wanted to program the tags
cheers
derausgewanderte said:
Need to test this to be 100%, but never had problems so far. Only used nfc a few times. The NFC is at the very bottom of the phone, the metal plate is closer to the finger print reader, correct. It should not interfer.i will test tonight when home.
edit1: tested with some tags I had around and it works without a problem. That also reminded me that I wanted to program the tags
cheers
Click to expand...
Click to collapse
Based on this I got the mount. BTW the plate is about 1.5 x 2.25 in. plenty small enough to not cover the bottom of the phone.
marka