[ROM][Redmi 2][26/09] CyanogenMod 12.1 - Miscellaneous Android Development

[ROM][Redmi 2][26/09] CyanogenMod 12.1 - Miscellaneous Android Development

What is CyanogenMod?
CyanogenMod 12.1 is a custom ROM based on Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over AOSP for your device. CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
Bugs:
Audio recorded will have a short 3-4 second screeching noise at the start
CPU gets stuck at 1.2 GHz for ~5 minutes at first boot.
Downloads:
CyanogenMod:
GApps link
Instructions:
First time flashing CyanogenMod 12.1 on your device, or coming from another ROM (e.g. MIUI)?
WARNING: This procedure will factory reset your device! Accounts, applications, settings, etc will be lost!
Download the file cm-12.1-xx-UNOFFICIAL-hm2014811.zip to your phone from the links below
Download the file gapps-511-base-xx-signed.zip to your phone from the links below
Reboot your device into Recovery mode by holding PWR+VOL-UP
Format userdata, cache and dalvik cache
Install both the ROM and the GApps zip files
Reboot
Upgrading from earlier version of CyanogenMod 12.1?
Download the file cm-12.1-xx-UNOFFICIAL-hm2014811.zip to your phone from the links below
Reboot your device into Recovery mode by holding PWR+VOL-UP
Install the ROM zip
Reboot
Experience issues?
Please provide the following info:
logcat
dmesg
/sys/fs/pstore/ram_oops if it is a reboot
Create an issue on the GitHub repo! I won't entertain many requests on this thread.
Special mentions:
@balika011 - Open source kernel
@ketut.kumajaya - Crucial fixes
XDA:DevDB Information
CyanogenMod 12.1, ROM for all devices (see above for details)
Contributors
zwliew
Source Code: https://github.com/zwliew/android_device_xiaomi_hm2014811
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: 20150926
Stable Release Date: 2015-09-26
Created 2015-08-30
Last Updated 2015-09-25

Changelog
26/09/2015
Re-fix camera
Set SELinux to permissive as some denials need to be addressed
25/09/2015 - Broken, removed
Fix camera
Fix audio routing for speaker and headphones usecase
Fix audio offloading with audio effects
Fix screen flickering for certain panels
Improve audio calibration
Enhance memory management
17/09/2015
Fix LCD decolorization issue (thanks to kumajaya for finding out the cause)
Improved proximity sensor latency
Decreased display resume latency
Fix AudioFX effects
Fix battery capacity inaccuracy
Reduce random freezes and 'black screens'
Improve UI and tasks performance
Lower display power consumption
Add vibrator tuning support
05/09/2015
Improve usage performance and battery life
Enhance memory usage and low memory killer
Update kernel to latest CAF LA.BR.1.1.3_rb1.28 branch
Fix notification LED
Add variable LED blink duration and speed
Fix incorrect button settings
30/08/2015
First release
Device tree based off 29/08 CM 11.0 build
Kernel based off LA.BR.1.1.3_rb1.10
GPS HAL off LA.BR.1.2.4_rb1.1
Libraries and binaries kanged from rendang

Reserved

Nice work Dude!! Flashing asap ☺

Flashed it,and it has the same issue of kumajaya's build,the display turns bluish-yellow after the screen is turned off,otherwise everything else works except the bugs mentioned.
The weird thing is if i take a screenshot and view it from my backed up rom or PC,it appears normal.

s.sawrav said:
Flashed it,and it has the same issue of kumajaya's build,the display turns bluish-yellow after the screen is turned off,otherwise everything else works except the bugs mentioned.
The weird thing is if i take a screenshot and view it from my backed up rom or PC,it appears normal.
Click to expand...
Click to collapse
Its the display not the system

nick37332001 said:
Its the display not the system
Click to expand...
Click to collapse
So,can @zwliew you please look in to this?my lcd is (otm1258a_otp_720p_video_EBBG)

s.sawrav said:
So,can @zwliew you please look in to this?my lcd is (otm1258a_otp_720p_video_EBBG)
Click to expand...
Click to collapse
Are you using the Redmi 2 Prime? What is your model?

zwliew said:
Are you using the Redmi 2 Prime? What is your model?
Click to expand...
Click to collapse
Yes and the model number is 2014818(same as that of redmi 2 found in india).Cm 11 works perfectly and every other rom.But only the lollipop build made by you and kumajaya has this,which is understandable but can you PLEASE look in to this.
BTW thank you for all of your work.

s.sawrav said:
Yes and the model number is 2014818(same as that of redmi 2 found in india).Cm 11 works perfectly and every other rom.But only the lollipop build made by you and kumajaya has this,which is understandable but can you PLEASE look in to this.
BTW thank you for all of your work.
Click to expand...
Click to collapse
zwliew said:
Are you using the Redmi 2 Prime? What is your model?
Click to expand...
Click to collapse
Redmi 2 Prime has the same model number as normal Redmi as depends on where you live.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LCD of Prime is probably from Tianma.
http://www.tianma-usa.com
http://www.panelook.com/TL050JGXP01_TIANMA_5.0_CELL_overview_24611.html
Kumajaya does not know how to fix it.
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=148731&pid=2919473

nick37332001 said:
Redmi 2 Prime has the same model number as normal Redmi as depends on where you live.
LCD of Prime is probably from Tianma.
http://www.tianma-usa.com
http://www.panelook.com/TL050JGXP01_TIANMA_5.0_CELL_overview_24611.html
Kumajaya does not know how to fix it.
http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=148731&pid=2919473
Click to expand...
Click to collapse
Are you facing the same issue?

s.sawrav said:
Are you facing the same issue?
Click to expand...
Click to collapse
Sorry nope, I am using the original Redmi 2 where the display driver is supported thanks to balika

nick37332001 said:
Sorry nope, I am using the original Redmi 2 where the display driver is supported thanks to balika
Click to expand...
Click to collapse
But the screenshot you uploaded has the same LCD that i have,that is your phone's screenshot,right?

s.sawrav said:
But the screenshot you uploaded has the same LCD that i have,that is your phone's screenshot,right?
Click to expand...
Click to collapse
That's not my phones screenshot... I am not running miui lolz.
Anyways good thing all sensors are working
View attachment 3456769

nick37332001 said:
That's not my phones screenshot... I am not running miui lolz.
Anyways good thing all sensors are working
View attachment 3456769
Click to expand...
Click to collapse
Okay,will have to wait till i use this rom @zwliew can you please look in to this?
Thank you.

@zwliew you might want to check out this sources:
https://github.com/Silentlys/android_device_xiaomi_hm2014811
https://github.com/Silentlys/android_kernel_qcom_msm8916
Camera is working using this sources I think

My first impressions are great. Just nice too see lollipop on our device (I got *2013 model).
LED Bug is confirmed as after flashing with adapter plugged in the loading light is on, turns of after some time but gets back when you deactivate/activate the option for it.
Camera says no connection so also confirmed.
I have no problem with display after turn off/on.
Will test more and report.
Great Work man!!!!???

Will try this rom today in the evening and report. By the way, the people who are facing display issue, have you guys by mistake turned on the live display option? I know its too simple but worth checking out. Live Display turns your screen yellowish to prevent eye strain.

thakurneel said:
Will try this rom today in the evening and report. By the way, the people who are facing display issue, have you guys by mistake turned on the live display option? I know its too simple but worth checking out. Live Display turns your screen yellowish to prevent eye strain.
Click to expand...
Click to collapse
Yes i have tried that but no luck

hi,guys, I get the same issues with kumajaya's build, the display turns yellow after the screen is turned off. My lcd is r69431_HD720_video_sharp. I hope you could try to solve this problem. I think many people may have encountered this issue.

Related

[KK][4.4.4] CyanogenMod 11.0 for S63xx

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 11
Disclaimer
Upon flashing this ROM, you have voided your warranty. The developers are not held responsible for any problems or damage that may happen to your device. Please do some research first if you have any concerns regarding the features and bugs of this ROM. YOU have chosen to take this risk. You have been warned.
Downloads
Alpha
These are meant for development purposes and for the curious who would like to see the current progress.
Alpha 1
Beta
These are stable enough for daily use, which gives a near-smooth experience with most features working.
Beta 1
Beta 2
Beta 3
Beta 4
Beta 5
Beta 6
Stable
These speak for themselves.
Stable 1
Nightlies
These are updated everyday, more or less stable and with the latest bug fixes and features, but may break your device. Use with caution.
I understand the consequences, take me there now please.Bugs
These are the current bugs in the latest builds.
NFC (S6310N only)
RIL (S6312 only)
Video playback (Fixed in the nightly builds)
Camera
[See more or file a new bug report.]
FAQ & Troubleshooting
ETA for new release?
Don't ask, just wait.Why did make a new thread?
So I could update it and reach more people.Can X feature be added?
We might add it. File a feature request.Can I help with the development?
You can if you are willing, but PM me first before doing anything else.Stuck on CyanogenMod loading screen?
Make sure you have cleared your davik-cache, cache, and data partition before flashing.Getting a bootloop?
Make sure that you have downloaded the right ROM for your device.AOSP Keyboard force closes?
This is a bug within the app itself, we have no choice but to wait for the gapps developers to fix it.My problem X still persists even after doing the necessary steps, what now?
File a bug report, and include every detail of it (e.g. logcat, dmesg, etc.)
Do note that this is a development discussion, so refrain from posting anything unnecessary. If you want to thank us, just smash that thanks button.
XDA:DevDB Information
CyanogenMod 11 S63xx, ROM for the Samsung Galaxy Young S6310
Contributors
lesleyxxx15, NV-Dev, techyzen101
Source Code: https://github.com/S6310-Development
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: None
Based On: CyanogenMod
Version Information
Status: Abandoned
Current Stable Version: 1
Stable Release Date: 2016-05-28
Current Beta Version: 6
Beta Release Date: 2015-09-18
Created 2016-06-11
Last Updated 2016-08-01

Changelogs
Beta 1:
Fixed RIL
Overclocked CPU to 1.3Ghz
New device-tree and vendor
Fixed SELinux
Beta 2:
Fixed FC in some apps
Use libwebcore instead of webviewchromium
Fixed rotation
Change bootlogo
Beta 3:
Fixed MTP
The density is again 160DPI
The Audio HAL has been updated so the CAD driver is used
Fixed Equalizer
The browser works correctly
Ramdisk has been modified so the CAD driver works.
audio_policy.conf was updated
Added F2FS Support and enabled it
Added UHID Driver and enabled it
Beta 4:
Updated device-tree
Updated vendor
Fixed mini bug on browser
Added CMAccount
Beta 5:
Updated Audio (No noticable change tho)
Updated Camera (Still not fixed but getting closer)
Fixed Bluetooth
Beta 6:
Offline charging fixed (only when trying to boot with cable plugged in hangs on offline charging and when plugged in to usb it starts booting)
Fixed bug causing Xposed to not work
Kernel 3.4.98
Overclocked GPU to 192 MHz (some users experienced problems with this)
Fixed a few bugs related to Bluetooth
Added CMAccount again
Stable 1:
Updated CAD definitions (by @techyzen101), this fixes audio related bugs.
Updated kernel to support display-caf which is now being used (this broke video playback)
Offline charging now fully working (again @techyzen101)
Removed the camera binary to fix an issue with deep sleep
Updated BlueZ to 5.38 (thanks @NV-Dev)

Thanks and Keep up the great work...sure this will make the ways easier for cm 12 and cm 13

elprince_99 said:
Thanks and Keep up the great work...sure this will make the ways easier for cm 12 and cm 13
Click to expand...
Click to collapse
Don't forget 14

Great ! Testing it right now !

lesleyxxx15 said:
Don't forget 14
Click to expand...
Click to collapse
Ofcourse...you are a big developer and we all support you

with action launcher, my favorite, and a few mb more zram. would be nice if we could overclock this cpu too.
**edit: more photos. with a little overclocking too, the phone doesnt lag at all, but forget the battery. in 6 hours without even using much the phone , battery is dead and need recharcge.
~wave to unlock feature also is working like a charm.

What is the order of (fixing ril for s6132) in the list of bugs to be fixed ?

elprince_99 said:
What is the order of (fixing ril for s6132) in the list of bugs to be fixed ?
Click to expand...
Click to collapse
First Camera then Dual Sim

lesleyxxx15 said:
First Camera then Dual Sim
Click to expand...
Click to collapse
Thanks for your effort and good luck in fixing bugs

Hope my phone back normally on days, today go to service, so I'll flash with this ROM again. I agree , dev must focus on cm11 so everything work like stockrom after that cm12 and 13, I like cm12, Alive colors, and maybe cm13 is more interesting :good:
Do best devs

beta 1 sais the cpu is overclocked but at s6310 i get max 1008mhz. can s6310 be overclocked too ? it is too slow at 1008

kessaras said:
beta 1 sais the cpu is overclocked but at s6310 i get max 1008mhz. can s6310 be overclocked too ? it is too slow at 1008
Click to expand...
Click to collapse
The overclocks were removed as of Beta 5 as I started my own kernel project. This kernel made 5.0+ and much more possible. Stable 3 might get overclocks, undervolting etc.

@lesleyxxx15 can you give a link for working gapps please? Thanks

razvangrig said:
@lesleyxxx15 can you give a link for working gapps please? Thanks
Click to expand...
Click to collapse
http://opengapps.org/
Pick ARM, 4.4 and nano.

Any feedback? I wanna try this CM rom for my lil bro's SGY but afraid if it still not for daily use.
Sent from my GT-N7000 using XDA-Developers mobile app

Camera is a bug? Why it is stable? Can we use cam now in this version?
Sorry because it is only my opinion!
Sent from my GT-S6310

JerwinSayat said:
Any feedback? I wanna try this CM rom for my lil bro's SGY but afraid if it still not for daily use.
Sent from my GT-N7000 using XDA-Developers mobile app
Click to expand...
Click to collapse
phamngocduy.1998 said:
Camera is a bug? Why it is stable? Can we use cam now in this version?
Sorry because it is only my opinion!
Sent from my GT-S6310
Click to expand...
Click to collapse
The Stable build in the OP is fine for daily usage. All bugs which are found are there.
It's up to you guys to see if you really need the camera or want to watch vids etc.
Stable 2 will be released when the Camera works and will be for all devices (S6310, S6310N, S6312)

lesleyxxx15 said:
The Stable build in the OP is fine for daily usage. All bugs which are found are there.
It's up to you guys to see if you really need the camera or want to watch vids etc.
Stable 2 will be released when the Camera works and will be for all devices (S6310, S6310N, S6312)
Click to expand...
Click to collapse
I see. Maybe I'll wait for the next version. Goodluck dev! You can do it hehe
Sent from my GT-N7000 using XDA-Developers mobile app

Hi Les, move sensor doesn't work whit last nightly build.
Work fine whit Stable rom

[ROM][6.0.1_r74][UNOFFICIAL] Resurrection Remix M 5.7.4 - Berlin (2017-02-06)

Resurrected Screenshots
Psst....
View the Gallery here: http://imgur.com/a/0yHsi
Resurrected Source Code
Device Tree: https://github.com/honor6xdev/android_device_honor_berlin/tree/rr-marshmallow
Vendor Tree: https://github.com/honor6xdev/android_vendor_honor_berlin/tree/6.x
Kernel: https://github.com/OpenKirin/android_kernel_huawei_frd

Credits
All thanks goes to @XePeleato, @surdu_petru and @OldDroid . Can't thank them enough. This build is based completely on the trees uploaded by them (with little modifications) so kudos to them.
I would like to thank our old P8 Lite Dev Team. I'm thankful to them for introducing me to building ROMs and for the knowledge they imparted to me.
Huge thanks to Resurrection Remix Team for working really hard to bring this ROM to us.
Finally thanks to you and the XDA for support and prayers.

What's Working
Touchscreen (for all it matters)
MTP/ADB
Dual SIM (not tested though device reports dual sim support present)
SD Card slot
WiFi
Cellular Network
Audio
Camera (1080p recording is shaky, will look into it)
And other things which I probably always miss to check
Little Bugs
All Lineage OS 13 bugs.
Fingerprint Sensor is not yet working. Support for it will be added tonight IA.
Settings crash when setting Password/PIN/Pattern. Will look into it.
Sleep issue. Device doesn't wakes after sleeping. Will be hopefully fixed in next build.
Device doesn't switches to Speaker after Earphones are ejected. As a temporary workaround, use Soundabout to force switch (search the app in Play Store).
Bluetooth not working
Network Type (LTE/3G/2G) Switcher not working
SIM reports as Voice out of service. Due to it calling, messaging not working. Will check it more closely.
Inaccurate picture dimensions shot by Camera

Great work buddy. Keep it up.
Just for user who wants to know to know the model number for this - BLN-L24.
May be you can add in title or in OP.

Wow!
:good::good:

hackslash said:
What'sWorking
LittleBugs
All Lineage OS 13 bugs.
Fingerprint Sensor is not yet working. Support for it will be added tonight IA.
Settings crash when setting Password/PIN/Pattern. Will look into it.
Sleep issue. Device doesn't wakes after sleeping. Will be hopefully fixed in next build.
Device doesn't switches to Speaker after Earphones are ejected. As a temporary workaround, use Soundabout to force switch (search the app in Play Store).
Bluetooth not working
Network Type (LTE/3G/2G) Switcher not working
SIM reports as Voice out of service. Due to it calling, messaging not working. Will check it more closely.
Inaccurate picture dimensions shot by Camera (will be fixed in future builds)
Click to expand...
Click to collapse
have you added the finger print support sir? gonna download if finger print already working

goodygoods said:
have you added the finger print support sir? gonna download if finger print already working
Click to expand...
Click to collapse
Well the Fingerprint sensor is giving some headaches at the moment. Just wait for dome time until it is figured out.

hackslash said:
Well the Fingerprint sensor is giving some headaches at the moment. Just wait for dome time until it is figured out.
Click to expand...
Click to collapse
ok sire, no need to rush, you guys are doing good, keep it up ??

Great news! Thanks for the hard work!

What models can u this rom ?

Hi... for which model is compatible this ROM? Standard or Premium Edition?
Honor 6X BLN-TL00, BLN-TL10, BLN-AL10 ... ?
Thank you very much for the support

Wow Resurection Remix on honor 6x .... wow one of the best Custom Rom

cctoti said:
What models can u this rom ?
Click to expand...
Click to collapse
It should basically be compatible with all models which share the same SoC, specifications, etc. Make a backup and test it. That's the best way to tell if it work on your device or not for sure.

hackslash said:
It should basically be compatible with all models which share the same SoC, specifications, etc. Make a backup and test it. That's the best to tell if it work on your device or not for sure.
Click to expand...
Click to collapse
okie, i'll tell you about my BLL-L22 tomorrow )

pickandrew said:
Hi... for which model is compatible this ROM? Standard or Premium Edition?
Honor 6X BLN-TL00, BLN-TL10, BLN-AL10 ... ?
Thank you very much for the support
Click to expand...
Click to collapse
It should work on all models. But always back up and try.

Fingerprint Scanner issue is now resolved. A new build will be released today with many fixes

hackslash said:
Fingerprint Scanner issue is now resolved. A new build will be released today with many fixes
Click to expand...
Click to collapse
Awesome buddy..you guys are superb.

New Build
Resurrection Remix M 5.7.4 02/07/2017
Please check the OP for Download link.
What's Fixed:
Fingerprint Sensor now works
Deep Sleep issue is fixed
Audio Routing issue fixed (automatically switches to headphones, speaker, earpiece)
Settings crash issue after setting a screen lock fixed
2G/3G/LTE Toggle (Not really tested but the toggle sticks)
P.S. Camera is not working correctly in this build. I'll revert the commit I did to fix image size and will see it in next builds.
Also special thanks to @XePeleato for the help and Deep Sleep patch and @Meticulus for the rest of the patches.

Great work! I've been using this ROM for a couple days now and it works really well! Here are the top issues I've noticed:
1) Wifi tethering doesn't seem to be working.
2) Phone calls (T-mobile) are almost impossible due to constant network switching (LTE, HSPA, HSPA+, etc). So I've resorted to calling over WiFi with Hangouts.
3) Wifi works most of the time, but often connects to router but then claims there is no internet access in which I then have to restart the phone. It's done this on multiple routers.
Not sure if these are just Lineage bugs or not. I will try and get logcats. Thanks for the hard work! You've made the Honor 6x usable finally (EMUI is awful).

TeamHorizon's XenonHD Rom for LeEco Le 2 (s2)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TeamHorizon's XenonHD Rom Builds for LeEco Le 2 (s2)http://www.xenonhd.com
XenonHD is a custom firmware aka ROM for various Android devices.
It is based on LineageOS 15.1 with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "Blazing Fast, Rock Stable and Buttery Smooth".
Device Source:
Device Tree
Kernel Tree
Vendor Tree
Download Links:
ROM: Stable
GApps: opengapps.org
Flashing Instructions:
To install this ROM you will need to have a latest custom Recovery such as TWRP installed.
Copy the downloaded ROM to your phone.
Boot into your recovery
Back up your ROM
Make a full wipe (system, data, cache, dalvik)
Install the ROM
Install GAPPS package
Reboot - the first boot can take up to 5 minutes
Other Links:
Github
Google+
XDA:DevDB Information
TeamHorizon's XenonHD Rom Builds for LeEco Le 2 (s2)
Contributors
sahilashraff9, ProPrk
Source Code:
https://github.com/TeamHorizon
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stable
Based On: Lineage OS
Version Information
Status: Stable
Created 2018-03-22
Last Updated 2018-03-22

HI Dev
Very happy , so many ROMS for OREO,
I am not able to flash this ROM , Present running on Firehound Oreo ROM.
After Wiping & trying to flash this ROM Showing this version in not suitable for your device s2 & Error 3002

upendrae2 said:
Very happy , so many ROMS for OREO,
I am not able to flash this ROM , Present running on Firehound Oreo ROM.
After Wiping & trying to flash this ROM Showing this version in not suitable for your device s2 & Error 3002
Click to expand...
Click to collapse
Try to download again

How about camera stability...?

steprajjog said:
How about camera stability...?
Click to expand...
Click to collapse
Stable but crashes sometime like other Oreo Rom

Hi
sahilashraff9 said:
Try to download again
Click to expand...
Click to collapse
No use ,after downloading also it is showing same error .7

upendrae said:
No use ,after downloading also it is showing same error .7
Click to expand...
Click to collapse
I checked its working fine

upendrae said:
No use ,after downloading also it is showing same error .7
Click to expand...
Click to collapse
Update your twrp to 3.2

Dear Rahul
kRahul9 said:
Update your twrp to 3.2
Click to expand...
Click to collapse
How to update TWRP, present i am on TWRP 3.0.2
Please suggest & also provide the link

upendrae2 said:
How to update TWRP, present i am on TWRP 3.0.2
Please suggest & also provide the link
Click to expand...
Click to collapse
My dear friend, you must google things before posting anything here. It just take few words (lesser than you login to xda and create a question) to write and get the result.
anyways here's the link

sahil.kalka said:
My dear friend, you must google things before posting anything here. It just take few words (lesser than you login to xda and create a question) to write and get the result.
anyways here's the link
Click to expand...
Click to collapse
Thank you updated my TWRP.....
Sorry for more questions...

upendrae2 said:
Thank you updated my TWRP.....
Sorry for more questions...
Click to expand...
Click to collapse
It's OK.

Changelog:
Code:
- Latest Security Patch
- Bluetooth Calls Should Works (Thanks To Rk585)
- Removed Nova Launcher
- Added New Launcher for Better Experience
- Less Battery Drain

sahilashraff9 said:
Changelog:
Code:
- Latest Security Patch
- Bluetooth Calls Should Works (Thanks To Rk585)
- Removed Nova Launcher
- Added New Launcher for Better Experience
- Less Battery Drain
Click to expand...
Click to collapse
Bluetooth Calls - No audio still

Even I am awaiting for bluetooth call audio from so long. I request devs to put that bug on priority list. No one even mentions it in their bug list which is wrong. They should. Every ROM based off Lineage has this bug. You van call and pick up call using Bluetooth but after that u can't hear nor the recover can listen to you.

swapnil0545 said:
Even I am awaiting for bluetooth call audio from so long. I request devs to put that bug on priority list. No one even mentions it in their bug list which is wrong. They should. Every ROM based off Lineage has this bug. You van call and pick up call using Bluetooth but after that u can't hear nor the recover can listen to you.
Click to expand...
Click to collapse
Trying to fix but no tester available to test bluetooth all the time

Changelog:
Code:
- Added VR
- Bluetooth Might Work This Time
- Stock Thermal Engine For Less Heat
Thanks to @Rk585 for fixes:fingers-crossed:

@sahilashraff9
This for me is by far the best Oreo ROM. I know that all the devs have put a lot of work into making this work for our phones. I have not had a single issue with this ROM. Bluetooth works fine for me, but I use my car for calling and a Bluetooth to FM transmitter for media audio since they car does not support it. Perhaps that is where others have an issue. I'm not in the build that came out today, but everything is working, so I'm not planning on changing that. The battery life is far better than any other ROM I've used. Thank you for all your hard work.

Overstuffedcow said:
@sahilashraff9
This for me is by far the best Oreo ROM. I know that all the devs have put a lot of work into making this work for our phones. I have not had a single issue with this ROM. Bluetooth works fine for me, but I use my car for calling and a Bluetooth to FM transmitter for media audio since they car does not support it. Perhaps that is where others have an issue. I'm not in the build that came out today, but everything is working, so I'm not planning on changing that. The battery life is far better than any other ROM I've used. Thank you for all your hard work.
Click to expand...
Click to collapse
Thanks for the Compliment, I hope i will fix everything in upcoming updates:fingers-crossed:
Yes, battery life is better than other ROMs, i will try to improve it more
Thanks Again

I have noticed that with the camera app, even the play store ones, the flash comes too early and you can't take a picture at dark most of the time. I don't know if that's a ROM issue, or not. Great work. Love the battery life.

[ROM][UNOFFICIAL][8.1.0][f1f] LineageOS 15.1 [14/07/2018]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
LED
Torchlight
Accelerometer sensor
Enforcing selinux
Broken
You tell me
Source code:
device tree common: https://github.com/LineageOS/android_device_oppo_common
device tree msm8939-common: https://github.com/LineageOS/android_device_oppo_msm8939-common
device tree f1f https://github.com/LineageOS/android_device_oppo_f1f
kernel: https://github.com/LineageOS/android_kernel_oppo_msm8939
Download
2018-07-14
Initial Oreo build
Since last 14.1 fixed accelerometer in kernel (changes in lineage gerrit on review)
mailru: lineage-15.1-20180714-UNOFFICIAL-f1f.zip
gdrive: lineage-15.1-20180714-UNOFFICIAL-f1f.zip
How to install?
To install this you need spectrum project unlocked bootloader and TWRP installed. Use this instruction to install spectrum project https://forum.xda-developers.com/oppo-f1/development/rom-twrp-flashable-project-spectrum-t3678445
After installing spectrum project you can install this lineage build using TWRP recovery. To install Oreo custom roms you need at least TWRP version 3.2.0 recovery. Here is my twrp 3.2.1 build: mailru oppo-twrp-3.2.1-test02.img or gdrive oppo-twrp-3.2.1-test02.img mirrors.
Upgrade from my Lineage 14.1 build should work too.
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0][f1f] LineageOS 15.1 [14/07/2018], ROM for the Oppo F1
Contributors
highwaystar_ru, mikeioannina, maniac103
Source Code: https://github.com/LineageOS/android_kernel_oppo_msm8939
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Testing
Created 2018-07-14
Last Updated 2018-07-14

Reserved

I'll be trying this ROM for my girl, but please is it possible for you to find out a way to port stock camera to your ROM? If it isn't possible then it's fine though.

Man
U are the boss ❤
Been using the last build u made and now the accelerometer also works ❤❤
Will try ❤

How about the battery drain? Is there no such issue in this rom?

Bugs or not don't know
If charging sound is kept on
It keeps on playing nonstop until restart

alleandrojames said:
How about the battery drain? Is there no such issue in this rom?
Click to expand...
Click to collapse
Yes the normal incorrect values shown is three most probably
Sometime it seems normal and sometimes abnormal :3

Installing it right now. I checked your Gerrit patches, I'm really astonished by your dts files modifications, don't know how you guessed those values.
If I have time I'll try to fix bugs (if I can…).

kdd998 said:
Installing it right now. I checked your Gerrit patches, I'm really astonished by your dts files modifications, don't know how you guessed those values.
If I have time I'll try to fix bugs (if I can…).
Click to expand...
Click to collapse
No bugs found so far just needs some improvement in battery reportings and VoLTE needs to be added ..
I think we are good to go official

Lol no way. My retired f1 might need to get booted up. Where have you been all of its life ?

khannz7 said:
No bugs found so far just needs some improvement in battery reportings and VoLTE needs to be added ..
I think we are good to go official
Click to expand...
Click to collapse
Yeah the battery readings are faulty :3
Been charging my mobile for sometime draining it still stuck at 2% ? but it is actually charging

The battery consumes too fast ?

Is there anyway we can get the accelerometer working in the nougat build?
As phonw doesn't charge in this build i meant ultra slow charging

Ghostv33 said:
Is there anyway we can get the accelerometer working in the nougat build?
As phonw doesn't charge in this build i meant ultra slow charging
Click to expand...
Click to collapse
It is kinda faulty needs to be improved

khannz7 said:
It is kinda faulty needs to be improved
Click to expand...
Click to collapse
Ya anyway to add the accelerometer to his nougat build?

Ghostv33 said:
Ya anyway to add the accelerometer to his nougat build?
Click to expand...
Click to collapse
If you mean a zip patch or something then no ,
But you can add it to your sources and compile a rom with accelerometer working.
PS
Also you need to pull logs everytime you find a bug , if you want a developer debug it

After a few hours of tests, here are my findings:
LED notification seems to be missing (or I couldn't find where to enable it)
It's rock stable! Amazing!
Pictures quality are inferior to ColorOS (same quality as in Spectrum, it seems that a beauty filter on portraits is still engaged)
GPS first fix time is a bit longer (~20s instead of ~5s)
LTE/H+ works great (can't test VoLTE, no carrier with this feature yet in my country)
Bluetooth & Wi-Fi are working perfectly for me
Double tap 2 wake (dt2w) is working great
Battery life is OK but battery usage statistics are not trustworthy (I got 113% on applications usage)
What are your finding?
For me, it's definitely a daily driver :good: Big thanks to @highwaystar_ru and the LineageOS devs.

kdd998 said:
After a few hours of tests, here are my findings:
LED notification seems to be missing (or I couldn't find where to enable it)
It's rock stable! Amazing!
Pictures quality are inferior to ColorOS (same quality as in Spectrum, it seems that a beauty filter on portraits is still engaged)
GPS first fix time is a bit longer (~20s instead of ~5s)
LTE/H+ works great (can't test VoLTE, no carrier with this feature yet in my country)
Bluetooth & Wi-Fi are working perfectly for me
Double tap 2 wake (dt2w) is working great
Battery life is OK but battery usage statistics are not trustworthy (I got 113% on applications usage)
What are your finding?
For me, it's definitely a daily driver :good: Big thanks to @highwaystar_ru and the LineageOS devs.
Click to expand...
Click to collapse
Agree with you , for the VoLTE it doesn't work , needs to be enabled

The battery charging stats dont update if full drained

The ROM is soooo stable ?
The only issue for me here is the battery, if only someone could make a fix for the battery issue this is going to be my permanent ROM ?

[ROMs][TREBLE] OpenKirin AOSP Collection

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to Team OpenKirin AOSP Project. Our goal is to provide
a overall stable AOSP experience across all Huawei/Honor phones
utilizing a Kirin SoC and EMUI 8.0 - either updated or shipped.
So far most of the bugs have been fixed and the ROMs are fully usable
as daily driver - and fully Kirin optimized.
This is the device support section for: Honor 9.
Any bugs found on this device(s) can be reported here, please include proper logs if you encounter any issues.
We support 4 ROMs in total as of now - LineageOS (Unofficial), CarbonROM (Official), ResurrectionRemix OS (Official from Beta 2+), OmniRom
You can find all needed guides/roms on our official website: https://openkirin.net
Requirements: basically full stock EMUI 8.0, with stock recovery/ramdisk
Support: Telegram - https://t.me/joinchat/EeDpi02ekfeJSBeaV4eqOw
XDA:DevDB Information
OpenKirin Treble ROMs, ROM for the Honor 9
Contributors
OldDroid, XePeleato, surdu_petru
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: LineageOS, CarbonROM, ResurrectionRemix OS, OmniRom
Version Information
Status: Beta
Created 2018-08-13
Last Updated 2018-08-27

I'm happy to see new builds for our device. Right now I'm downloading RR build....Omni works also good.
Thank you very much!

Hi,
i have a few questions:
- Is magisk working or howto root?
- Where are the source code?
- Are gapps included?
- Is front and rear camera working?
- Is OTA update supported?
Thank you!

Unlocked bootloader and had my first go with playing with the h9.
Magisk install was straightforward enough, no real instructions just found 368 ramdisk and patched that and fastboot flashed it.
Gapps is baked in
OTA don't know.
Camera is not that reliable with huawei camera and standard camera which is a pity. Currently trying some carmera from the play store and am having better results

buchman said:
Unlocked bootloader and had my first go with playing with the h9.
Magisk install was straightforward enough, no real instructions just found 368 ramdisk and patched that and fastboot flashed it.
Gapps is baked in
OTA don't know.
Camera is not that reliable with huawei camera and standard camera which is a pity. Currently trying some carmera from the play store and am having better results
Click to expand...
Click to collapse
Thanks. Perhaps you can try this camera for huawai treble devices: https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
OTA is not so important, but a nice addon. 
 @OldDroid Any reasons why the source code is not public?

What about Open Camera from playstore ?

Nollie8969 said:
What about Open Camera from playstore ?
Click to expand...
Click to collapse
I still had issues with open camera force closing. Simple camera seems to be working fine for me currently. Also noticed NFC appears to be disabled

Hi,
i installed the rr beta 2 rom yesterday. Camera works for me. No problems yet. OTA is not available, but that no big problem.
I disabled the softkeys, but found no settings to configure the hardware keys. Default settings are:
left key: back
right key: recent apps
middle key(fingerprint sensor): nothing
How can i change the hardware key settings?
Then i noticed that wlan sometimes automatically disable if screen turns off.

Just flashed RROS Beta 2 and play store wasn't installing any apps. I restarted my phone to see if it would fix the issue and now i'm stuck with "android is loading" with a loading bar. Anyone else had this issue?

olishadyx said:
Just flashed RROS Beta 2 and play store wasn't installing any apps. I restarted my phone to see if it would fix the issue and now i'm stuck with "android is loading" with a loading bar. Anyone else had this issue?
Click to expand...
Click to collapse
Yes. I had it. Problems is, that no launcher app (trebuchet for example) is set and in my case i couldn't set it because the list was empty.
Try to swipe from top and enter settings and set start app. If your list is empty too, only factory reset helps for me.

Saftpresse99 said:
Yes. I had it. Problems is, that no launcher app (trebuchet for example) is set and in my case i couldn't set it because the list was empty.
Try to swipe from top and enter settings and set start app. If your list is empty too, only factory reset helps for me.
Click to expand...
Click to collapse
I just installed LOS instead. Everything is fine now except no NFC

Hi,
 @OldDroid or others
The changelog for RR beta 3 says:
added better support for H9 hw keys, the fps gestures now match up with emui gesture behaviour by default – long press fps: assistant – short press: home
Click to expand...
Click to collapse
but the middle hardware key (fingerprint sensor) doesn't work for home or assistant. If touch nothing happens. Is this a bug or i missed a configuration?
Thank you

Saftpresse99 said:
Hi,
@OldDroid or others
The changelog for RR beta 3 says:
but the middle hardware key (fingerprint sensor) doesn't work for home or assistant. If touch nothing happens. Is this a bug or i missed a configuration?
Thank you
Click to expand...
Click to collapse
they should work, make sure you enabled FPS gestures under Settings -> System -> OpenKirin

OldDroid said:
they should work, make sure you enabled FPS gestures under Settings -> System -> OpenKirin
Click to expand...
Click to collapse
Thank you! Now it works as expected. You should enabled it by default and/or make it searchable by the settings search box
The only think i noticed that wifi sometimes disconnects if screen is off. If screen is turned on you can see wifi connects again.

Does anybody use Omnirom? Is NFC functional? I can switch it on but nonfunctional.

After a major derp with Magisk on my previous Rom, and since I had to reset my whole device, decided to give your RRO a spin. I must say, great job.
Smooth, fast, with all the customizations RR has to offer without added weight.
And it runs beautifully well with my kernel I must say. Thank you!

JBolho said:
After a major derp with Magisk on my previous Rom, and since I had to reset my whole device, decided to give your RRO a spin. I must say, great job.
Smooth, fast, with all the customizations RR has to offer without added weight.
And it runs beautifully well with my kernel I must say. Thank you!
Click to expand...
Click to collapse
Camera works fine for you?? (Honor 9)

Morello12 said:
Camera works fine for you?? (Honor 9)
Click to expand...
Click to collapse
Stock camera works just as good as in EMUI for photos, video shooting still needs to be fixed. Only AOSP camera can shoot video and in some cases the video does not get saved.
Other than that, NFC needs fixing and one or two more minor things i guess.

Hi,
the front camera take pictures, but the pictures are not saved.

RROS has been updated to Beta 3

Database Info

welcome