hi,
I am using MBP (Mac book pro) and my shield tablet, I used to be able to access all it's data and SD card data via Android File Transfer but now after I installed new kernels and custom roms (like bliss 3.9) I can't access it anymore, my computer doesn't reconize it..... it drives me crazy
The problem is that I don't remember when was the last time it worked so I don't know what may have caused this...
Here are my details:
Bliss version 3.9
Kernel version: 3.10.33-TeamBliss-g48f7329-dirty
if anyone has an idea how to fix this, or what can be the problem I would love your help.
thank you!
Check KSX kernel thread. You need to flash a dtb file in order to get USB working again.
Enviado desde mi SHIELD Tablet
Thank you sooooo much you have no idea how much you helped me!!!
Related
Hey all heres the deal I've had my Atrix now since the end of Feb and since then have only recently successfully rooted and enabled non market apps on my Atrix (recently meaning this week lol). I'm new to developing and modifying phones but I'm not new to computers . I admittedly have mostly hardware experience and slight software background. With that said I need your help !!!! I'm interested in sideloading either Gingerblur or Greyblur to my phone . I am currently running XP Pro on my computer and so far as I know I have done all I can do on my own with no help. I have the drivers installed, Moto Link installed, phone set to debuging, SD card unmounted, and Greyblur downloaded & extracted onto phone's internal mem......... Now heres where ya'll expertize is needed . BTW I have the SDK installed ontomy computer as well but I'm not familiar with ADB or its commands . Any help, advice or suggestions would greatly be appreciated.
Hi Dear Friends,
I tried this great rom : http://forum.xda-developers.com/showthread.php?t=2237438
Everything is working simply great except :
1) USB storage of my phone is not being detected i.e. 16 GB by default. I tried several time from setting-->storage--->mount usb storage but no use. Because of this I'm not able to use camera, gallery, etc.
2) whenever I try to connect my phone to pc through usb wire, it fails after showing some progress. So not able to transfer files.
Earlier I was using AOKP Milestone that they released in october 2012. At that time there was no above such problem.
I believe this is not any major issue and you will help and guide me to solve this.
Thanks in advance. Other all features of rom are working awesomely.
Your Friend
PJ
[email protected] said:
Hi Dear Friends,
I tried this great rom : http://forum.xda-developers.com/showthread.php?t=2237438
Everything is working simply great except :
1) USB storage of my phone is not being detected i.e. 16 GB by default. I tried several time from setting-->storage--->mount usb storage but no use. Because of this I'm not able to use camera, gallery, etc.
2) whenever I try to connect my phone to pc through usb wire, it fails after showing some progress. So not able to transfer files.
Earlier I was using AOKP Milestone that they released in october 2012. At that time there was no above such problem.
I believe this is not any major issue and you will help and guide me to solve this.
Thanks in advance. Other all features of rom are working awesomely.
Your Friend
PJ
Click to expand...
Click to collapse
have you made a backup of your stock rom or some other rom? try that and see if its working if it will work on your backup try reflashing the rom, if it dosent work on your internal sd card might be damaged
for GoClever i102 not booting device ( the same with AIRIS KIRA N10020)
I had this problem and managed to solve it. Maybe i can help others.
1.get the firmware from http://airis.livedrive.com/IO/DownloadSharedFile?NodeID=0ed5e3b3a95d42e198fdfad4e1d780a3&AID=336352 or http://www.airissupport.com/SupportHome2.aspx?Codigo=N10020 with tutorial (use google translate because it's in spanish)
2.download winimage for windows http://www.winimage.com/download/wima6490.exe install it for evaluation copy and run as administrator
3.insert a microSD card in a card reader and connect it to your PC, start winimage>DISK MENU>RESTORE VIRTUAL HARD DISK IMAGE... and select the card reader and you will have to select the firmware for your device. It will promt you that all the data from the SDcard will be erased and let it finish the job. It can promt you for an error hit OK and continue.
4.Remove the card from the CardReader after image was copied and insert it into your turned off GoClever device. Conect the charger and start the device. It will boot by itself and install everything. It will promt you to remove the card when finished. Restart and let it boot (1st boot might take up to 5 minutes)
5.Format the microSd card.
https://www.youtube.com/watch?v=QdEaXlWZTp8 a video tutorial
This method worked for me, I'm not responsable for damaging your devices.
glad if i helped!
I am now trying to install like you explained... will see if it work's
worked for me on a netbook goclever l102
the best tutorial to me to work on a netbook GoClever L102 !!!
Thanks, it woked for me
It worked for my GoClever i102 - n10020.
Also I managed to root it. If someone is interested in how to do it, the instructions can be found here:
http://forum.xda-developers.com/android/help/rooting-goclever-i102-n10020-t3119091
Thanks again!
help please
it came to my hands a goclever android netbook I102 used from one of my cousins thats stuck on a never ending loop with the android/goclever logo when it starts. I tried to do the option this post gives ( and ty in advance for that ) because i couldnt find anything else out there on the internet. But my problem still persists, i tried to use both an sd card and a usb pen and nothing changed. Does anyone know what else can be done to boot the netbook? or reinstall the android system? It doesnt allow the netbook to even start so theres nothing much i can do, im not an expert on the matter but i wanted to at least see if there was a way to salvage the device. If not is going on a one way trip to the trash.
I've also tried to look for the download of the android system for the goclever netbook but couldnt find any.
Any help would be much apreciated Thanks.
kmapsi said:
it came to my hands a goclever android netbook I102 used from one of my cousins thats stuck on a never ending loop with the android/goclever logo when it starts. I tried to do the option this post gives ( and ty in advance for that ) because i couldnt find anything else out there on the internet. But my problem still persists, i tried to use both an sd card and a usb pen and nothing changed. Does anyone know what else can be done to boot the netbook? or reinstall the android system? It doesnt allow the netbook to even start so theres nothing much i can do, im not an expert on the matter but i wanted to at least see if there was a way to salvage the device. If not is going on a one way trip to the trash.
I've also tried to look for the download of the android system for the goclever netbook but couldnt find any.
Any help would be much apreciated Thanks.
Click to expand...
Click to collapse
Does the tablet booted succesfuly from the sd card you used?
If yes, have you tried with the updated android version (N10020-1.6.vhd)?
I currently have 2 external hd I use for OTG, 3tb Passport Ultra and a 4tb Passport, both formatted to exFat. At first, the 4tb works like a charm. Suddenly, got an error from it from my android tablet that it was damaged and needs to be reformatted. Plugged it into my computer and my computer recognized it and its contents so i rand chkdsk and found no errors. When I tried it again on my tablet, it displayed the same error so I opted to format it again to exFat and copy some videos on it and tested it on my tablet. Unfortunately I ran into the same error. Basically my tablet cant recognize this external HD anymore without help of stickmount on exfat or paragon on ntfs. My other hd still works even though I reformatted it again and my tablet seems to recognize it without a problem. Has anyone come across something like this before?
Hi !
Please give us more info about your tablet , model / android version/ software status ( rooted , unblocked bootloader , mods installed ) in order to provide assistance , thank you
Cheers !
xanthrax said:
Hi !
Please give us more info about your tablet , model / android version/ software status ( rooted , unblocked bootloader , mods installed ) in order to provide assistance , thank you
Cheers !
Click to expand...
Click to collapse
My tablet is a Galaxy Tab S2 (T-810) 5.1.1. stock root.
I feel that the problem lies with the external hd instead. All my android device sees it as corrupted but it works with no problem with Windows. I can only mount it with stickmount and paragon.
I don`t know how it worked at first , 4TB hdd needs lot of power to work on a Samsung device , you may need a Y cable
If stickmount does the trick then keep on using it , it may be software related , maybe an updated application did something
I may suggest to reflash the stock firmware and try on a clean system but a 4TB hdd it looks too much for a tablet
xanthrax said:
I don`t know how it worked at first , 4TB hdd needs lot of power to work on a Samsung device , you may need a Y cable
If stickmount does the trick then keep on using it , it may be software related , maybe an updated application did something
I may suggest to reflash the stock firmware and try on a clean system but a 4TB hdd it looks too much for a tablet
Click to expand...
Click to collapse
I use a y cable on it. The thing is, it used to worked before. One day it suddenly said that I need to reformat it again. I have another external hd (3tb) and it works no problem. I think something happened on the hard drive itself.
It could be a connector problem as well, a shortcut or something
xanthrax said:
It could be a connector problem as well, a shortcut or something
Click to expand...
Click to collapse
On unrelated note, sorta forgot how to do the whole reflash+root etc so could you point me to the right direction and should i stick to 5.1.1 or go 6+?
Gregole84 said:
On unrelated note, sorta forgot how to do the whole reflash+root etc so could you point me to the right direction and should i stick to 5.1.1 or go 6+?
Click to expand...
Click to collapse
A good index is here , I would suggest the latest firmware
https://forum.xda-developers.com/tab-s2/general/index-samsung-tab-s2-one-index-t3544310
Good luck !
I was wondering, could i boot to twrp recovery and install a rooted stock 6.0.1. Rom?
I guess yes , the version is correct so it is for your device
Good luck !
Hello,
I have the 1.10 model of the TL-WN722N plugged in with a standard OTG adapter and it doesn't work.!
I installed Nethunter via the TWRP method by installing the image file in recovery mode, after unlocking the OEM via windows with adb.
I have version 6.0.1 of Android on Nexus 5 and I connect the key with a standard OTG adapter.
Currently I have done a lot of research and I can't figure out how to fix the problem.
I also try to install applications that manage and enable the OTG.
Here are screenshots of the commands I tried and with the version of my Android.
sorry i can't put an external link
The biggest problem is that the modules do not install, I have already tested some kernel and none install the modules so we get the problem cited above.
sorry i can't put an external link
I have spent whole days looking for a solution, looking at forum pages and I don't understand.
I managed to understand that there is a bone for the phone + the kernel and the full kali pack (tell me if I'm wrong).
But I don't know why the modules don't want to install.
The phone works very well in OTG.
I tested with several OTG cables and it works perfectly with a USB key.
I'm on Nexus 5 with original android 6.0.1 in marshmallow and I'm trying to connect a TL-WN722N 1.10 to the phone.
In short I hope you can help me because I am surpassing, I am completely neophyte but that fascinates me.
Sorry for the translation, I'm French.
Here is the name to my gitlab issue:
"Problem with my TL-WN722N V 1.10 on Nexus 5 6.0.1 plugged with OTG"
I tested the kernel that I was offered and it doesn't work.
Especially since I can't understand in what order I should install each file and if I should "reboot" between each "install".
Thank you for taking the time to read this block and I hope you can help me.
If any info is missing, tell me.
Thank you
A +
andurilmike
andurilmike said:
Hello,
I have the 1.10 model of the TL-WN722N plugged in with a standard OTG adapter and it doesn't work.!
I installed Nethunter via the TWRP method by installing the image file in recovery mode, after unlocking the OEM via windows with adb.
I have version 6.0.1 of Android on Nexus 5 and I connect the key with a standard OTG adapter.
Currently I have done a lot of research and I can't figure out how to fix the problem.
I also try to install applications that manage and enable the OTG.
Here are screenshots of the commands I tried and with the version of my Android.
sorry i can't put an external link
The biggest problem is that the modules do not install, I have already tested some kernel and none install the modules so we get the problem cited above.
sorry i can't put an external link
I have spent whole days looking for a solution, looking at forum pages and I don't understand.
I managed to understand that there is a bone for the phone + the kernel and the full kali pack (tell me if I'm wrong).
But I don't know why the modules don't want to install.
The phone works very well in OTG.
I tested with several OTG cables and it works perfectly with a USB key.
I'm on Nexus 5 with original android 6.0.1 in marshmallow and I'm trying to connect a TL-WN722N 1.10 to the phone.
In short I hope you can help me because I am surpassing, I am completely neophyte but that fascinates me.
Sorry for the translation, I'm French.
Here is the name to my gitlab issue:
"Problem with my TL-WN722N V 1.10 on Nexus 5 6.0.1 plugged with OTG"
I tested the kernel that I was offered and it doesn't work.
Especially since I can't understand in what order I should install each file and if I should "reboot" between each "install".
Thank you for taking the time to read this block and I hope you can help me.
If any info is missing, tell me.
Thank you
A +
andurilmike
Click to expand...
Click to collapse
You didn't mean the whole time the 6.1 factory image, or did you?
It was to 90 % over the thread of Lineage the talk.
Anyhow, anything which you got linked by the fellow user and me, were apart from the official image from Offensive's site, solely for Lineage meant.
Before I forget, here the newly build chroot, with all the new apps, wallpaper, boot animation from the nightlys:
https://mega.nz/#!9MZ3nAKJ!oQFguK9vltGN5TNjxcfZmQvM2xg3_EzNWTz5roBN-Hk
What do you not understand about the flash procedure in particular?
PS
As re4son wrote does the hammerhead kernel not install any modules.
I don't know what you flashed before though.
What did happen with Lineage+Opengapps+root+installer+kernel(or together, as my previous upload..?
I haven't the best experiences with Lineage, but it depends.
May I ask if you had time to take a look from the rom I linked you at the beginning?
It's the most reliable, although a bit outdated rom named NetHunter OS.
https://gist.github.com/binkybear/8f0f4eee292d5263372f47c3c3edd08e
Post your questions as detailed as possible..so let's wrap it up.
469/5000
A miracle happened there and installing nethunteros-nethunter-hammerhead-cm-14.1-hammerhead and then kalifs-armhf-full.tar.xz for the chroot and it works well.
The only problem is that when I try to install packages:
E: unable to locate kali-linux nethunter package
E: unable to locate kali-linux package
E: unable to locate kali linux-all package
But other than that, everything works.
Victory.
Thank you all for your patience and your advice.
andurilmike said:
469/5000
A miracle happened there and installing nethunteros-nethunter-hammerhead-cm-14.1-hammerhead and then kalifs-armhf-full.tar.xz for the chroot and it works well.
The only problem is that when I try to install packages:
E: unable to locate kali-linux nethunter package
E: unable to locate kali-linux package
E: unable to locate kali linux-all package
But other than that, everything works.
Victory.
Thank you all for your patience and your advice.
Click to expand...
Click to collapse
No need to thank me.. I am glad, that you were able to get it to work finally, after that number of failed attempts..
I went with the NetHunterOS rom version, which I linked you in gitlab
https://build.nethunter.com/nethunt.../LOS-hammerhead-14.1-20170102-nethunteros.zip
SuperSU has already been integrated in this variation as well.
After you flash the obligatory OpenGapps version for the same Android version and architecture 7.1 [arm], you are basically good to go.
I prefer the package size 'pico' - but this goes after your personal liking.
In my experiences is it better to use the "older" kalifs filesizes and not the newer ones with ~ 1,3 GB -- it seems to break somehow the rom/kernel if you use the newer ones
https://build.nethunter.com/kalifs/kalifs-20171118/kalifs-armhf-full.tar.xz
I don't know if you can use the internal wifi chipset, as well as a external adapter for wireless pentesting with the version wich you choose, but this is possible with the one I linked yesterday and again above.
A problem is that
(sudo) apt-get (dist-)upgrade
Click to expand...
Click to collapse
and seemingly further package upgrades are breaking the rom.
Although theoretically should you be able to install stuff.
Did you try it over the terminal, or just the NetHunter.apk?
Best regards l
Thank you.
I use an external wifi antenna, the TL-WN722N v 1.10 in USB OTG.
I tried to install metapackages via nethunter.apk
Nethunter cannot detect a HID interface.
Duckhunter HID does not work.
Thank you
A +
andurilmike said:
Thank you.
I use an external wifi antenna, the TL-WN722N v 1.10 in USB OTG.
I tried to install metapackages via nethunter.apk
Nethunter cannot detect a HID interface.
Duckhunter HID does not work.
Thank you
A +
Click to expand...
Click to collapse
Yeah, I just meant with the mentioned rom/setup, are you able to use the internal Wifi chipset (Broadcom4339) in monitor mode and could forgo the external adapter.
HID should work as well.
No, I cannot use the internal wifi card in monitor mode or the HID device.
I don't understand why?
Thank you