EDIT: UPDATED WITH NEW KERNEL INFO FROM @freeza FOUND HERE
The Older Manh_it Kernel has random reboot issues and is NO LONGER RECOMMENDED .....
SO USE FREEZAS KERNEL DOWNLOAD HERE THERE ARE NO KNOWN ISSUES WITH IT AND HE UPDATES REGULARLY
ROOTING will trip knox and tripping knox WILL kill Samsung pay FOREVER...even if you flash back the stock tar
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOU PHONE. ... IT IS YOUR DECISION TO TAKE THE PLUNGE.
Anyone that tries this and gets bootloops and cannot recover here is a link to the OGD stock tar file... flash in Odin AP slot from download mode you should recover very easily DOWNLOAD THE SPRINT N920P OGD STOCK TARBALL HERE TO RECOVER AND/OR TO RETURN TO OGD STOCK
WORD OF WARNING>>> Once you take the update to OI6 or use the OI6 TAR (get OI6 HERE ) .. YOU CAN NOT GO BACK TO OGD.....
Download ODIN 3.10.7
Download FREEZA's BEASTMODE KERNEL.TAR HERE
DO NOT Download Noble_Kernel_Auto-Root_N920P_v0.1_Alpha.TAR
Download TWRP-2.8.7.0-N920P.TAR
Download BETA-SuperSU-v2.52.ZIP
PREP THE PHONE FIRST ...
go to settings>>>about device>>> scroll to bottom and build number 8 times
now press back button once and tap developer options...
make sure USB debugging is on AND OEM UNLOCK NEEDS TO BE ON ALSO .....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Place phone in ODIN / Download mode ( press and hold vol down+home+power for a few seconds...then release and press vol up) and plug the phone to the pc....Watch for ID:COM in top left corner to give an ID.......if none is given then check the data cable or try a different one.... NOTE: once you try a flash and "IF" it fails... you will need to disconnect and power off the phone and go back into download mode again or you will get "Setup Connection" hangup error when re-trying to flash
Now Click the "AP" button and in the pop up window, migrate to the KERNEL.TAR and double click it. Wait for it to verify md5 checksum. If bad, re-download the file.(you can download and flash the KERNEL. ZIP in TWRP later)
Now check in the OPTIONS TAB.... make sure ONLY Auto Reboot & F. Reset Time are checked...
uncheck Re-Partition ! ! !
Once these steps are followed, click start and wait till you see PASS in the ID:COM Field
After re-boot, GO BACK INTO DOWNLOAD/ODIN MODE and follow same steps and flash the TWRP.TAR file
(Do not try to boot the phone yet, you will get boot loops.....)
Now install LATEST KERNEL.ZIP & SUPERSU.ZIP in TWRP by going into recovery by powering off the phone then press and hold vol up+home+power until you see the TWRP splash .... (or just install from the market... the market install "may" give update binaries issues... I recommend flashing in TWRP )
I have a SPECIAL HANGOUTS thread for SPRINT NOTE 5 OWNERS.
I would like to add ALL of you to it.
PLEASE PM ME YOUR GMAIL EMAIL ADDRESS SO I CAN ADD YOU
So you have rooted, NOW WHAT? . . . You need to flash the best custom rom > > > >
Galaxy Note 5 OGD Stock Deodexed Rom
@tdunham has built the best deodexed rom.... CLICK HERE FOR HIS THREAD or CLICK this button
This build is based on the stock OGD 5.1.1 Lollipop build.
This is a first release. Even though it has been tested, please report any issues.
Features:
- Rooted
- Busybox
- SQLite
- Hotspot enabled
- Knox Removed
- ItsOn Removed
Download Link ---> N920P_OGD.5.1.1.De-Odexed.Ver1.0.zip
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
TWRP-2.8.7.1-Alpha_N920P.tar.md5
or
philz_touch_6.59.0-820876114.tar.md5
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode (press and hold Home + Power + Volume Up buttons)
• BACKUP YOUR CURRENT SETUP WITH TWRP
•Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.Going back to the Stock Rom
• Use the same Odin instructions to flash TWRP above but using the stock tar
N920PVPU1AOGD_N920PSPT1AOGD_SPR-STOCK_TARBALL
Stock rom mirror download
Credits to my beta testers: @Chaz187 @fsunoles101 @JoeyDuran @GAPO @rlmiller @sml2004
Special Credits to: @tx_dbs_tx
For help with development, the csc & personal mode fixes.
to read about it.
.
.
.
.
.
.
.
thanks for the heads up, but if you haven't yet, you may wanna check the the original dev before mirroring his work. some of them like to track downloads to see how much interest in their work.
Do you guys have an issue updating su binaries?
Sent from my SM-N920P using Tapatalk
ebs512 said:
Do you guys have an issue updating su binaries?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
No issues on my end
Sent from my SM-N920P using Tapatalk
Trying now
madsquabbles said:
thanks for the heads up, but if you haven't yet, you may wanna check the the original dev before mirroring his work. some of them like to track downloads to see how much interest in their work.
Click to expand...
Click to collapse
Please do not assume that I haven't reached out to him.
ebs512 said:
Do you guys have an issue updating su binaries?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Try flashing the TWRP.ZIP in recovery if you haven't yet
So I'm assuming this trips knox and disables Samsung pay?
If it does might want to out that in the OP.
DarkManX4lf said:
So I'm assuming this trips knox and disables Samsung pay?
If it does might want to out that in the OP.
Click to expand...
Click to collapse
This is true. It will trip KNOX and disable Samsung Pay.
Will root break the fingerprint sensor or any features other than Samsung Pay??
Sent from my SM-N920P using Tapatalk
Yes fingerprint sensor works. I just used it and it worked no problem.
Is there a way to unroot at the moment ?
DarkManX4lf said:
Is there a way to unroot at the moment ?
Click to expand...
Click to collapse
I would think you can flash the tar file to get back to stock out the box.
travisw0204 said:
I would think you can flash the tar file to get back to stock out the box.
Click to expand...
Click to collapse
Yeah thats the usual way to do it but I can find the stock tar. Its not on Sammobile.
DarkManX4lf said:
Yeah thats the usual way to do it but I can find the stock tar. Its not on Sammobile.
Click to expand...
Click to collapse
I thought Robby had a link for the stock Tar in the Op?
Sent from my SM-N920P using Tapatalk
travisw0204 said:
I thought Robby had a link for the stock Tar in the Op?
Sent from my SM-N920P using Tapatalk
Click to expand...
Click to collapse
Ahh yeah you are right. I just saw that now. The second link worked from OneDrive.
Thanks !
Wifi tether?
Sent from my SM-N910T
ubigred said:
Wifi tether?
Sent from my SM-N910T
Click to expand...
Click to collapse
That works without root by changing the APN
Sent from my SM-N920P using Tapatalk
worked perfect, no issues as of yet.
EDIT:
anyone else getting random reboots? I've had 3 since rooting.
WiFi tether works
Sent from my SM-N920P using XDA Premium HD app
Related
[Easy upgrade to 4.3][OS 4.3 MK9][03/01/2014]GT-N7100
Code:
*** Disclaimer
-- Flashing roms especially with bootloaders are dangerous, make sure you make a nandroid backup before hand,Please follow the instructions carefully
Introduction
The aim of this project is to make easy to upgrade to 4.3 or downgrade to 4.1.
This rom is the official samsung 4.3 [N7100XXUEMK9] without knox files or bootloader.
Rom is for people that wish to upgrade to 4.3 and keep their device in Official status without knox.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation instructions via Odin pc
You must reset your device to factory defaults before flashing.
Download file and extract it
Put your device into download mode [volume down, power button and home button]. Keep them pressed until the download mode shows up then press volume up]
Launch Odin ,select pda and browse to Final.tar.md5 and press start in Odin.
this will take a while
Done!
Click to expand...
Click to collapse
Installation instructions via Mobile Odin
Copy final.tar.md5 to the storage card of your device
-- Tap the Open file … tab mobile odin ,
browse to the final.tar.md5 location and select it,
tick all boxes under everoot and Wipe [this will **root the rom and wipe the device]
Now press flash Firmware
Now you must Download and flash this package Via pc Odin!
Done!
Click to expand...
Click to collapse
Notes:
Click to expand...
Click to collapse
If Odin fails don't despair put you phone into download mode again and re-flash even if it happens more that once.
Avoid Usb 3 ports.
Click to expand...
Click to collapse
Rooting instructions
option-1Kingo root download the program and install on your pc follow the instructions to root your device.
option 2 option Chainfire CF-AUTO-ROOT you will need triangle away to reset your binary count after.
option 3- **Chanfire Mobile Odin
Click the above Options to redirect you to theirs respective pages.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download
Download rom from link below
-- Download
Click to expand...
Click to collapse
Changelog
Code:
Current changelog: -- 03/01/2014
[BASE] -- MK9 BTU
[BUILD NUMBER]-- JSS15J.N7100XXUEML3
KERNEL] -- 3.0.31-2138564
[BOOTLOADER] -- MJ5
[RADIO] -- MJ9
[SELINUX STATUS] ENFORCING
FAQ
How to downgrade to 4.1?
Coming soon.....
Can i flash a custom rom after this?
Yes .
Can i use this package to Set my device to OFFICIAL status?
yes, After flashing it use Triangle away to Fix your Status.
Can i use this Rom to revert Knox to X0?
NO.
Will this package Trigger my binary?
No.
Q. I have already flashed a 4.3 custom rom, can i still flash this?
Yes
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Chaifire,Kingo root, and all XDA Developers.
* insert text
XDA:DevDB Information
4.3 upgrade, a ROM for the Samsung Galaxy Note II
Contributors
faria
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1
Based On: Stock Samsung
Version Information
Status: Stable
Created 2014-01-04
Last Updated 2014-01-04
Click to expand...
Click to collapse
Click to expand...
Click to collapse
reserved*****
Does this wipes data ?
Or can I do an "upgrade" from stock rooted (4.1, flashed via Odin) to this version ?
No It doesn't wipe data, if you got rooted stock It should be fine. Never the less a backup and a wipe is recommended.
Sent from my GT-N7100 using Tapatalk
so if i am on 4.1.2.....and follow d procedure....i will have knox counter as 0?
what about recovery? which recovery you would suggest provided it shouldnt set the counter to 1....as i dont want to void the warranty...??
and thanks for the latest 4.3 for note II...been waiting for the simple instructions !!:highfive:
swapyworld said:
so if i am on 4.1.2.....and follow d procedure....i will have knox counter as 0?
what about recovery? which recovery you would suggest provided it shouldnt set the counter to 1....as i dont want to void the warranty...??
and thanks for the latest 4.3 for note II...been waiting for the simple instructions !!:highfive:
Click to expand...
Click to collapse
1- Yes
2- you can flash any recovery you wish, but of course it will trigger the binary count if you wish to remove the binary count you must flash this package from here http://forum.xda-developers.com/showthread.php?t=2588557 and then run triangle away.
reserved.. thanx
Sent from my GT-N7100 using Tapatalk
I'm a bit lost in all those firmware versions
I'm trying to update my girlfriend's note2 to 4.3
Here is her phone's info :
Baseband : N7100XXDME4
Version number : JZ054.N7100XXDME6
CSC : N7100XADME2
No recovery installed, and counter still at 0
Can I flash your version safely from her version ?
@ bud77.Yes.
Sent from my GT-N7100 using Tapatalk
wrongpost
Worked perfectly, plus root via kingoapp
I noticed it is odexed, do you plan on a deodexed one ?
Sent from my Nexus 5
I will give a try, but my priority is to make it prerooted like a did before but on 4.3 the root gets disabled at first boot, so far.
Now that you are on 4.3 you can install a 4.3 deodexed rom via custom recovery or mobile odin, there is 2 such rooms in the development treads.
Sent from my GT-N7100 using Tapatalk
Everything went ok with the upgrading, except that Triangle Away not seem to work anymore?
I have run version 3.10 + unfreezed the sysscope file in Titanium B, but I'm still "custom".
Maybe it doesn't work when I have used the Kingo root? Do you have any advice..?
Regards
Unfreeze sysscope, unistall triangle away, reboot, clear cache and wipe data of sysscope and Interprise sysscope, now reinstall triangle away an run it.
Sent from my GT-N7100 using Tapatalk
I heard many comments about Mobile Odin not working with 4.3
Has anyone successfuly flashed this?
I have Mobile Odin Pro and 4.1.2
My phone is rooted but with a stock Samsung ROM.
Wondering if 4.1.2>4.3 will go smoothly with Mobile Odin and this ROM, keeping root. Anyone?
If you follow my instructions for mobile odin it should work. ?
Sent from my GT-N7100 using Tapatalk
faria said:
Unfreeze sysscope, unistall triangle away, reboot, clear cache and wipe data of sysscope and Interprise sysscope, now reinstall triangle away an run it.
Click to expand...
Click to collapse
Did it all, in the exact order. Still custom. What gives?
With 4.1.2 it worked fine, but I used CF autoroot then.
Thanx for trying to help.
Televinken said:
Did it all, in the exact order. Still custom. What gives?
With 4.1.2 it worked fine, but I used CF autoroot then.
Thanx for trying to help.
Click to expand...
Click to collapse
Still "custom"where? In the Os or download mode? Your binary is 0 rigth?
Sent from my GT-N7100 using Tapatalk
faria said:
Still "custom"where? In the Os or download mode?
Click to expand...
Click to collapse
In the OS. So now OTA is gone, & so is updating via Kies.
When I check the binary, it shows "1". *sigh*
Televinken said:
In the OS. So now OTA is gone, & so is updating via Kies.
When I check the binary, it shows "1". *sigh*
Click to expand...
Click to collapse
Flash this package then run triangle away . http://forum.xda-developers.com/showthread.php?t=2588557
Sent from my GT-N7100 using Tapatalk
HOW TO INSTALL A 4.4.2 TOUCHWIZ ROM OVER A 4.3 ONE WITHOUT DATA LOST
REQUIREMENTS:
-Note 3 (N9005 model only!)
-Computer (with windows)
-Installed driver (install Kies, driver will be installed automatically)
-An USB cable
-This zip file: Download
-CWM Recovery: Download
-A 4.4.2 NA6 Touchwiz rom, choose and download it from Galaxy Note 3 Android Development section.
Click to expand...
Click to collapse
IMPORTANT:
1)You can follow this guide only as a N9005 user. Other Note 3 models will probably be destroyed.
2)I’m not responsible of what happends to your terminal. I updated my Note 3 doing these steps and it worked for me. If you follow my guide step by step, you will not fail. Do this update only if you know what are you doing.
3)Remember that updating bootloader to 4.4.2 will not allow to come back to 4.3 touchwiz roms or bootloader and will not allow to install 4.4.2 aosp-based roms.
Click to expand...
Click to collapse
LET’S START!
1) Extract the downloaded “Note3_Update_BootLoader.zip” file. I suggest to make a new folder and to drag and drop all the zip contnent into it. Copy downloaded “n9005-cwm-recovery-6.0.4.7-kk(0125).tar” file in the same folder.
2) Put you phone in download mode (turn it off and then hold down power button, volume – button and home button together until something shows on the phone screen. Now press volume up to confirm that you know what are you doing.
3)Open “Odin3 v3.09.exe” with Administrator privileges (right click on odin icon and click Run as Administrator)
4)Now “untick” Auto-Reboot. By doing that, your phone will not reboot after flashing bootloader.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5)Tap on BL button and open “BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_CERT.tar”
6)Now connect you phone via USB Cable, wait if you computer is installing drivers and then press Start Button. Wait till it finishes flashing
7)Now close Odin, take you phone (that still be in download mode) and hold down Power button + Volume down button + home button until it reboots in download mode, again. Press volume up to confirm.
8)Open Odin again, run it as Administrator. Now untick Auto-Reboot.
9)Tap on AP button and open “n9005-cwm-recovery-6.0.4.7-kk(0125).tar”. Now tap on Start Button.
10)Wait until it finishes flashing. Now close odin and take your phone. Hold down power button + volume up button + home button until it reboots in recovery mode.
11)Phone will show some texts and than it will reboot again. Hold down power button + volume up button + home button until it reboots again in recovery. Now you can install your 4.4.2 touchwiz rom. DON’T WIPE ANYTHING!
12)When rom is installed, reboot your phone… All Done! And you did not lost anything!
Click to expand...
Click to collapse
IF THIS GUIDE WAS HELPFULL FOR YOU, HIT THANKS BUTTON!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
First thing I don't understand is why we needs guide on development section.
Another thing is title. I didn't get you about data wipe. There are two method to update ROM either with CWM OR Odin (mobile odin/PC odin). If we directly flash stock ROM with odin that also doesn't wipe isn't ?
Problem only starts when we flash 4.4 on 4.3 (with any od said method) and device stuck at samsung logo. in that situation nothing but factory reset only works.
This guide can have better title how to flash bootloader and CWM recovery.
dr.ketan said:
First thing I don't understand is why we needs guide on development section.
Another thing is title. I didn't get you about data wipe. There are two method to update ROM either with CWM OR Odin (mobile odin/PC odin). If we directly flash stock ROM with odin that also doesn't wipe isn't ?
Problem only starts when we flash 4.4 on 4.3 (with any od said method) and device stuck at samsung logo. in that situation nothing but factory reset only works.
This guide can have better title how to flash bootloader and CWM recovery.
Click to expand...
Click to collapse
Thread moved by mods... my mistake. If you update to 4.4.2 from 4.3 using full firmware you need to wipe in order to boot to android.... This isn't needed if you update bootloader only... i wrote how to update from 4.4.2 without factory reset, installing bootloader only! If you follow this guide you will not have to wipe, so you keep root, recovery and data! It works, now i'm writing from a 4.4.2 rom, yesterday was 4.3 and i didn't lost nothing.
Inviato dal mio SM-N9005 utilizzando Tapatalk
OK, then when some users update 4.4 via OTA does their device gets stuck to boot? OTA also have new bootloader. Same way if someone flash 4.4 via Kies does their device gets wipe/stuck at samsung logo?
This thing is depends on data of device and may or may not stuck. In case it can't boot up, you needs wipe and nothing else will work in such situation.
dr.ketan said:
OK, then when some users update 4.4 via OTA does their device gets stuck to boot? OTA also have new bootloader. Same way if someone flash 4.4 via Kies does their device gets wipe/stuck at samsung logo?
This thing is depends on data of device and may or may not stuck. In case it can't boot up, you needs wipe and nothing else will work in such situation.
Click to expand...
Click to collapse
OTAs and Odin firmwares are totally different. OTAs are a lot lighter then odin firmwares and personally i've never seen a phone that enters in download mode while updating using OTA. If you flash a firmware using odin, you probabily need to wipe data. If you flash bootloader only, you don't need to wipe. Trust me. I didn't left anything using this method, so i thought to share what i did. You don't must to follow this steps. But maybe there's someone that wants to do that. I wrote this guide for this "someone".
AlbertoSONIC said:
OTAs and Odin firmwares are totally different. OTAs are a lot lighter then odin firmwares and personally i've never seen a phone that enters in download mode while updating using OTA. If you flash a firmware using odin, you probabily need to wipe data. If you flash bootloader only, you don't need to wipe. Trust me. I didn't left anything using this method, so i thought to share what i did. You don't must to follow this steps. But maybe there's someone that wants to do that. I wrote this guide for this "someone".
Click to expand...
Click to collapse
With your method though if you are on Knox 0x0 you get Knox 0x1 right? Because you flash custom recovery as I understand right? Because I am on 4.3 with Knox 0x0 and I would like to flash 4.4.2 without data loss but I am going to trip Knox If I use your method right? And if so, is there a method I can flash 4.4.2 without data loss and without tripping Knox?
I'm sorry, but there aren't any ways.... you'll trip knox if you follow this guide and if you update using full fimware, you will need to wipe data.... A question: why do you keep knox to 0x0? Warranty covers factory damages only, not user damages.... so if you had any factory damage, it should be already appeared!
Inviato dal mio SM-N9005 utilizzando Tapatalk
Well there are damages that aren't really user damages. If m/b gets fried or if screen gets damaged. For example on my S3 the volume buttons stopped working and it was covered by warranty. Am I wrong?
Sent from my GT-I9300 using Tapatalk
Ok finally rooted on 4.3 and used your method to flash XNOTE 8. Worked perfectly, no data loss
anpho said:
Well there are damages that aren't really user damages. If m/b gets fried or if screen gets damaged. For example on my S3 the volume buttons stopped working and it was covered by warranty. Am I wrong?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
You're right.... Samsung Warranty isn't clear... in some centers, they repair phones for free even if knox is 0x1, in other centers this doesn't happen. If you're lucky, you won't have any problem!
anpho said:
Ok finally rooted on 4.3 and used your method to flash XNOTE 8. Worked perfectly, no data loss
Click to expand...
Click to collapse
Good! Welcome to knox 0x1 world
Inviato dal mio SM-N9005 utilizzando Tapatalk
I asked other people from my country (Greece), and they say that Samsung is going to accept warranty claims even on Knox 0x1. That's why I did it hope it's true
Στάλθηκε από το SM-N9005 μου χρησιμοποιώντας Tapatalk
Great ..thank you..smooth update..:victory:
thanks really really man your the best i couldnt update from 4.3
AlbertoSONIC said:
HOW TO INSTALL A 4.4.2 TOUCHWIZ ROM OVER A 4.3 ONE WITHOUT DATA LOST
[/CENTER]
Click to expand...
Click to collapse
exactly as you said i couldnt updatefrom 4.3 but after flashing bootloader am on 4.4.2 thnx man
1. Take the NI1 OTA update. (Should the update fail see troubleshooting section below).
2. Place your phone into "Download Mode" (press and hold the "Home", "Volume Down", and "Power" keys until the phone powers on and displays warning screen, then press "Volume Up" key).
3. Flash the I337_NC1_Stock_Kernel using Odin's PDA slot(AP in Odin v3.09+).
4. Root using Towelroot-v3.apk(internet access not required).
5. Power off then boot into "Download Mode" again.
6. Flash the I337_NI1_Stock_Kernel also in Odin's PDA slot(AP in Odin v3.09+).
7. Install SuperSU to manage root access. Done!
Important!: Do not skip any of the above steps or you may experience issues with your device.
Notes:
1. After flashing the NC1 kernel your phone may run a little wonky, e.g. extreme lag, no wifi, etc., and towelroot may not root on the first try. If that happens reboot and try towelroot once again. Once rooted and after flashing the NI1 kernel your phone will again run like a champ!
2. Neither User Data nor knox warranty flag will be affected by following the above process.
3. The most common cause of a failed Odin flash is a bad usb port or cable. Please check before reporting a failure.
Troubleshooting:
Should the NI1 ota update fail consider flashing back to stock NB1 using either file in this thread: I337UCUFNB1 4.4 Stock Odin Tars & System Dump. Then take the NI1 ota update. (or place the I337_NB1toNI1_OTA_Update.zip onto your ext-sdcard and sideload from stock recovery). Once updated to NI1 continue from Step 2 above.
Alternative Method for Safestrap Users:
1. Use Safestrap's Backup Function to back-up User Data.
2. Place the I337UCUFNI1_100%_Stock_Rooted_ROM.zip onto your ext-sdcard.
3. Reboot into Safestrap recovery then perform an "Advanced Wipe" and wipe everything but your ext-sdcard.
4. Flash the I337UCUFNI1_100%_Stock_Rooted_ROM.zip using "Stock Slot."
5. Once complete press "Home" then reboot into "Download Mode."
6. Flash the I337_NI1_Stock_Kernel in Odin's PDA slot (AP in Odin v3.09+).
7. Reboot into Safestrap recovery and use the Restore Function to restore User Data. Done!
Notes:
1. The I337UCUFNI1_100%_Stock_Rooted_ROM.zip process will update your Modem, Non-hlos, System, Kernel, and Stock Recovery to NI1 but does not include the NI1 Bootloader.
2. Follow all of the above steps in the order provided and do not skip any steps or you may experience issues with your device!
I337_NI1 Stock Modem, Recovery, and System Dump
I337_NI1_Stock_Modem.tar.md5
I337_NI1_Stock_Recovery.tar.md5
Flash in PDA Slot in Odin(AP in Odin v3.09+).
I337_NI1_System_Dump.rar (If you don't know what this is you don't need it).
muniz_ri said:
reserved
Click to expand...
Click to collapse
Nice now all i need is the system dump from NI1 And Flashable Modem!
@muniz_ri
You done it again Bud.....Amazing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Venom0642
Sorry double post ...Tapatalk error
Venom0642 said:
Nice now all i need is the system dump from NI1 And Flashable Modem!
Click to expand...
Click to collapse
Uploading system dump now but may take awhile. My upload speed sucks.
muniz_ri said:
Uploading system dump now but may take awhile. My upload speed sucks.
Click to expand...
Click to collapse
Awesome bro thanks curious though is this 4.4.4 or is it still 4.4.2 ?
Sent From My Galaxy S5 SAMSUNG-SM-G900A Running On New Deadly Venom v4.0.0 KitKat 4.4.2
Venom0642 said:
Awesome bro thanks curious though is this 4.4.4 or is it still 4.4.2 ?
Sent From My Galaxy S5 SAMSUNG-SM-G900A Running On New Deadly Venom v4.0.0 KitKat 4.4.2
Click to expand...
Click to collapse
Still 4.4.2 but seems noticeably faster, mabe placebo. IDK
muniz_ri said:
Still 4.4.2 but seems noticeably faster, mabe placebo. IDK
Click to expand...
Click to collapse
Oh ok thanks someone should be soon enough adding modem flashable.
Sent From My Galaxy S5 SAMSUNG-SM-G900A Running On New Deadly Venom v4.0.0 KitKat 4.4.2
muniz_ri said:
Uploading system dump now but may take awhile. My upload speed sucks.
Click to expand...
Click to collapse
Venom0642 said:
Oh ok thanks someone should be soon enough adding modem flashable.
Sent From My Galaxy S5 SAMSUNG-SM-G900A Running On New Deadly Venom v4.0.0 KitKat 4.4.2
Click to expand...
Click to collapse
I will work on the modem and stock recovery when I get some extra time. And I take that back about my uploads speed...time warner just upgraded my plan free of charge, weird! I will post the link to the dump in a few minutes.
muniz_ri said:
I will work on the modem and stock recovery when I get some extra time. And I take that back about my uploads speed...TW just upgraded my plan free of charge, weird! I will post the link to the dump in a few minutes.
Click to expand...
Click to collapse
Nice thanks again[emoji106]
Sent From My Galaxy S5 SAMSUNG-SM-G900A Running On New Deadly Venom v4.0.0 KitKat 4.4.2
Venom0642 said:
Nice now all i need is the system dump from NI1 And Flashable Modem!
Click to expand...
Click to collapse
I337_NI1_System_Dump.rar
muniz_ri said:
I337_NI1_System_Dump.rar
Click to expand...
Click to collapse
Awesome Thanks! :good:
rooting
I just got this phone today and it just updated as well. I have rooted my old S4s and have some experience. Do i need to do anything to this phone before I follow the instructions in muniz's first post? Do i need to have alreay been rooted or anything? My phone is completely stock at the moment. Thanks.
Venom0642 said:
Nice now all i need is the system dump from NI1 And Flashable Modem!
Click to expand...
Click to collapse
Modems and Recovery added to Post# 2.
douggiephresh said:
I just got this phone today and it just updated as well. I have rooted my old S4s and have some experience. Do i need to do anything to this phone before I follow the instructions in muniz's first post? Do i need to have alreay been rooted or anything? My phone is completely stock at the moment. Thanks.
Click to expand...
Click to collapse
Nope
Is there any kernel modules yet for NI1?
Sent from my SGH-I337 using XDA Free mobile app
chitown835 said:
Is there any kernel modules yet for NI1?
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
You can pull the modules from the system dump in post #12.
hey,
I wanted to know one thing ..
my phone is already nc1 root stock, what should I do to upgrade it to nc1 root stock ??
Thanks
Could anyone upload a NI1 update.zip? Thanks in advance.
EDIT: 11/01/2015...This root method will work for OGD...OI6...OJ6... TRIED TESTED AND PROVEN ! ! !
WARNING: Once you USE THIS OI6 TAR OR take the OI6 OTA UPDATE . . . .
You will NOT be able to revert back down to OGD
EDIT: 11/01/2015...If you take OJ6 OTA Update, YOU CAN USE OI6 TAR FILE TO REVERT BACK TO OI6 / STOCK
With this TAR, you will be able to ODIN back to 100% FULL SPRINT STOCK. in the event you develop bootloops or just want to unroot
ROOTING will trip knox and tripping knox WILL kill Samsung pay FOREVER...even if you flash back the stock tar
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOU PHONE. ... IT IS YOUR DECISION TO TAKE THE PLUNGE.
Anyone that tries this and gets bootloops and cannot recover here is a link to the OI6 stock tar file... flash in Odin AP slot from download mode you should recover very easily DOWNLOAD THE SPRINT N920P OI6 STOCK TARBALL HERE TO RECOVER AND/OR TO RETURN TO OI6 STOCK
WORD OF WARNING>>> AGAIN Once you take the update to OI6 or use the OI6 TAR (get OI6 HERE ) .. YOU CAN NOT GO BACK TO OGD.....
TO ROOT:
Download ODIN 3.10.7
Download FREEZA's BEASTMODE KERNEL HERE
Download TWRP-2.8.7.0-N920P.tar
Download BETA-SuperSU-v2.49.zip
PREP THE PHONE FIRST ...
go to settings>>>about device>>> scroll to bottom and build number 8 times
now press back button once and tap developer options...
make sure USB debugging is on AND OEM UNLOCK NEEDS TO BE ON ALSO .....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Place phone in ODIN / Download mode ( press and hold vol down+home+power for a few seconds...then release and press vol up)
plug the phone to the pc....Watch for ID:COM in top left corner to give an ID.......if none is given then check the data cable or try a different one.... NOTE: once you try a flash and "IF" it fails... you will need to disconnect and power off the phone ( to power off press and hold Vol down + power for 10 sec ) and go back into download mode again or you will get "Setup Connection" hangup error when re-trying to flash
Now Click the "AP" button and in the pop up window, migrate to the KERNEL and double click it. Wait for it to verify md5 checksum. If bad, re-download the file.
Now check in the OPTIONS TAB.... make sure ONLY Auto Reboot & F. Reset Time are checked...
uncheck Re-Partition ! ! !
Once these steps are followed, click start and wait till you see PASS in the ID:COM Field
After re-boot, follow same steps and flash TWRP
Then either install SuperSU in TWRP by going into recovery by powering off the phone then press and hold vol up+home+power until you see the TWRP splash .... or just install from the market( the market install "may" give update binaries issues... flash in TWRP )
I have a SPECIAL HANGOUTS thread for SPRINT NOTE 5 OWNERS.
I would like to add ALL of you to it.
PLEASE PM ME YOUR GMAIL EMAIL ADDRESS SO I CAN ADD YOU
So you have rooted, NOW WHAT? . . . You need to flash the best custom rom > > > >
Galaxy Note 5 OI6 & OGD Deodexed Rom
@tdunham has built the best deodexed rom.... CLICK HERE FOR HIS THREAD or CLICK this button
tdunham said:
Galaxy Note 5 OGD/OI6 Stock Deodexed Rom2
This build is based on the stock OGD & OI6 5.1.1 Lollipop builds.
This is a first release. Even though it has been tested, please report any issues.
Features:
- Rooted
- Busybox
- SQLite
- Hotspot enabled
- Knox Removed
- ItsOn Removed
Download Link ---> N920P_OGD.5.1.1.De-Odexed.Ver1.0.zip
Download Link ---> N920P_OI6.5.1.1.De-Odexed.Ver1.0.zip
Changelog:
OI6 Release
- OI6 brings some security enhancements and fixes nothing specific.
- Fixed access to hiddenment dialer codes
- stagefright vulnerability fully patched (for now)
- Beastmode v1.2 kernel already included.
Rom Installation
Preparing the stock rom
• In the stock rom, turn on developer mode, enable USB debugging and OEM Unlock
- Settings>>>about device>>> scroll to bottom and tap build number 8 times
now press back button once and tap developer options...
- Toggle on both USB debugging and OEM Unlock.
• Copy the downloaded rom.zip file to internal storage
Install Custom Recovery with Odin
• Download Odin & custom recovery tar
Odin3_v3.10.6.zip
TWRP-2.8.7.1-Alpha_N920P.tar.md5
or
philz_touch_6.59.0-820876114.tar.md5
• Extract Odin zip-file
• Power down the phone
• Open Odin on pc
• Boot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
• Connect phone and wait until you get a blue sign in Odin
• Add the recovery file to AP / PDA (depending on version of Odin)
• Make sure re-partition & Auto Reboot are NOT ticked
• Click the start button and let the Odin flash complete
• Unplug & Reboot phone directly into Recovery Mode (press and hold Home + Power + Volume Up buttons)
• BACKUP YOUR CURRENT SETUP WITH TWRP
• Do a FULL wipe but do not reboot yet
A full wipe includes:
Dalvik Cache
System
Data
Cache
• Flash rom and reboot.
Going back to the Stock Rom
• Use the same Odin instructions to flash TWRP above but using the stock tar
Credits to my beta testers: @Chaz187 @fsunoles101 @JoeyDuran @GAPO @rlmiller @sml2004
Special Credits to: @tx_dbs_tx
For help with development, the csc & personal mode fixes.
Click to expand...
Click to collapse
to read about it.
.
.
.
.
.
.
.
reserved for later 1
reserved for later 2
reserved for later 3
nice bro, thanks. a lot of people have been waiting for this!
Is there by chance a flashable zip that doesn't affect the bootloader so you can go back to ogd if you want? I know in the past it has been done before, not sure what it takes to accomplish this. Thanks for all your hard work.
Thank you sooooo much, but this definitely should not be in the general section for sure. A mod needs to move this to its proper place, this is a lifesaver.
So I got a replacement Note 5. I updated to OJ6 and then followed this tutorial to root. I managed to get root and installed twrp. However, try to flash certain zips in twrp the phone just reboots. This only happens with certain zip files like xposed installer and the volume mod zip. The interesting thing is these zips flashed fine on my old Note 5.
Anyone have any ideas?
Edit: Nevermind, I reflashed stock via odin and went through update and root again. NOw it seems like it's working.
Can I flash twrp first and then flash the kernel zip? Because when I try to flash the kernel through Odin it gets stuck before it even starts.
melendez214 said:
Can I flash twrp first and then flash the kernel zip? Because when I try to flash the kernel through Odin it gets stuck before it even starts.
Click to expand...
Click to collapse
Yes, that shouldn't be a problem
rlmiller said:
Yes, that shouldn't be a problem
Click to expand...
Click to collapse
Ok thank you
DarkManX4lf said:
So I got a replacement Note 5. I updated to OJ6 and then followed this tutorial to root. I managed to get root and installed twrp. However, try to flash certain zips in twrp the phone just reboots. This only happens with certain zip files like xposed installer and the volume mod zip. The interesting thing is these zips flashed fine on my old Note 5.
Anyone have any ideas?
Edit: Nevermind, I reflashed stock via odin and went through update and root again. NOw it seems like it's working.
Click to expand...
Click to collapse
Can u get xposed working with OJ6? Stock rom?
drewiskee said:
Can u get xposed working with OJ6? Stock rom?
Click to expand...
Click to collapse
Yeah it works with stock rooted.
DarkManX4lf said:
Yeah it works with stock rooted.
Click to expand...
Click to collapse
I tried and got reboots and had to flash stock rom from lower build.
using twrp recovery
I have the edge + .....can I revert back to oi6 as well? Sorry I'm new at all this! Lol thank you
So, I was a master at rooting/manipulating my phone, but as it was a Note 2 until yesterday, I'm a bit rusty.
My son and I both got new Note 5s yesterday (a 32G and a 64G) and they've got OJ6 on them. I'm not completely sure I understand the instructions in post 1 - do I have to take the phone back to OI6 to be able to root using this method? Is there no root exploit for OJ6?
If I do have to revert, could you post clearly how to do it, please? Once I get past that I should be okay...
I have all these things I want to get done on the new one (getting rid of all the Sprint apps, backing up my messages, moving some program data over, more...) but realized everything I know about manipulating a cell phone is in Root, so I have to do it...
Thanks, in advance, for the help!!!
wackydroid said:
So, I was a master at rooting/manipulating my phone, but as it was a Note 2 until yesterday, I'm a bit rusty.
My son and I both got new Note 5s yesterday (a 32G and a 64G) and they've got OJ6 on them. I'm not completely sure I understand the instructions in post 1 - do I have to take the phone back to OI6 to be able to root using this method? Is there no root exploit for OJ6?
If I do have to revert, could you post clearly how to do it, please? Once I get past that I should be okay...
I have all these things I want to get done on the new one (getting rid of all the Sprint apps, backing up my messages, moving some program data over, more...) but realized everything I know about manipulating a cell phone is in Root, so I have to do it...
Thanks, in advance, for the help!!!
Click to expand...
Click to collapse
Yes, you can root OJ6 the same exact way as all the current builds.
I'm sure you're familiar with Odin by now so just download the OI6 factory tar (there isn't one available for OJ6 so far, its only available as an OTA update) and have that handy should you wish or need to go back to stock.
Also, if you see the OGD tar, don't bother with that one, you wont be able to flash that factory tar anyway as it will fail checks in odin when it recognizes you're on a newer build.
Additionally:
Since you're going to trip knox anyway by flashing TWRP custom recovery, you might want to keep in mind about wiping your internal storage too if you're having any issues along the way. It probably doesn't apply quite yet for you at this point but you know how it collects tons of extra stuff the longer you run android. There are a couple of deodexed stock builds and a custom rom too should you want additional features not available on stock.
All seemed to go well, BUT
When I boot, in tiny red type at top left, I get a "KERNEL IS NOT SEANDROID ENFORCING", or if booting into recovery "RECOVERY IS NOT SEANDROID ENFORCING".
What is that, and how do I fix it?
[EDIT] - I also just tried flashing the 1.2 version of the kernel and am still getting those messages...HELP...
wackydroid said:
All seemed to go well, BUT
When I boot, in tiny red type at top left, I get a "KERNEL IS NOT SEANDROID ENFORCING", or if booting into recovery "RECOVERY IS NOT SEANDROID ENFORCING".
What is that, and how do I fix it?
[EDIT] - I also just tried flashing the 1.2 version of the kernel and am still getting those messages...HELP...
Click to expand...
Click to collapse
That is normal you can't fix it!!!!!
SkyHigh auto-root kernel
OP.
Another auto root kernel. I've now added support for N920P
[KERNEL] [ROOT] [SM-N920P Exynos 7420] [02 Dec] SkyHigh TW 5.1.1 Kernel [v2.4]
I don't have the device, but I created it to share with users after receiving good feedback on Note5 :good:
Please make no direct download link, but add thread link to your OP (if your desire).
Also, loads of features with Synapse
Cheers,
UITA
I made a kit for those who want to use Android 6.01 Roms from the international threads on the N920T and N920W8 with working call audio
Before you start with this guide please read the whole thing before doing any modifications to your phone.
1. Download desired Intl ROM
2. Download This KIT
3. Download TWRP
3. Download SuperSU 2.71 BETA
4. Remove the .MD5 file extention on the BL and CP files and just leave the .tar
5. Using ODIN flash the BL and CP files
6. Using ODIN flash TWRP and reboot in to TWRP
7. Install desired Intl ROM and reboot in to Download Mode
8. Using Odin flash boot.tar and reboot in to TWRP
9. Install N920T MM Call audio fix and SuperSU 2.71 BETA (this is really important or your device will keep on booting in to recovery)
10. Enjoy
THE KERNEL IS INSIDE THE KIT FROM STEP#2 MUST USE KERNEL IN COMBINATION WITH AUDIO FIX OR YOU WILL NOT GET CALL AUDIO AFTER FLASHING THE KERNEL YOU MUST INSTALL SUPERSU 2.71 OR IT WON'T BOOT.
IF YOU SAY YOU FOLLOWED THE INSTRUCTION EXACTLY AND YOU DON'T GET CALL AUDIO BECAUSE YOU INSTALLED A DIFFERENT KERNEL ITS BECAUSE YOU DIDN'T FOLLOW THE INSTRUCTIONS EXACTLY.
The BL and CP files are only for N920T if you have a N920W8 that already has MM just use the call audio fix, kernel and supersu zip
I didn't provide the supersu zip, ODIN, and TWRP please search for those files in the threads
not responsible any damaged caused by this kit and please back-up before flashing anything
Also anyone is welcome to use the files in your ROMS just give credit
mastergrillo said:
I made a kit for those who want to use Android 6.01 Roms from the international threads on the N920T and N920W8 with working call audio
1. Download desired Intl ROM
2. Download This KIT
3. Download TWRP
3. Download SuperSU 2.71 BETA
4. Using ODIN flash the BL and CP files
5. Using ODIN flash TWRP and reboot in to TWRP
6. Install desired Intl ROM and reboot in to Download Mode
7. Using Odin flash boot.tar and reboot in to TWRP
8. Install N920T MM Call audio fix and SuperSU 2.71 BETA and reboot
9. Enjoy
i didn't provide the supersu zip, ODIN, and TWRP please search for those files in the threads
not responsible any damaged caused by this kit and please back-up before flashing anything
Also anyone is welcome to use the files in your ROMS just give credit
Click to expand...
Click to collapse
Awesome! Thanks a bunch!
mastergrillo said:
I made a kit for those who want to use Android 6.01 Roms from the international threads on the N920T and N920W8 with working call audio
1. Download desired Intl ROM
2. Download This KIT
3. Download TWRP
3. Download SuperSU 2.71 BETA
4. Using ODIN flash the BL and CP files
5. Using ODIN flash TWRP and reboot in to TWRP
6. Install desired Intl ROM and reboot in to Download Mode
7. Using Odin flash boot.tar and reboot in to TWRP
8. Install N920T MM Call audio fix and SuperSU 2.71 BETA and reboot
9. Enjoy
i didn't provide the supersu zip, ODIN, and TWRP please search for those files in the threads
not responsible any damaged caused by this kit and please back-up before flashing anything
Also anyone is welcome to use the files in your ROMS just give credit
Click to expand...
Click to collapse
I followed all steps everything works i cannot test call audio because i have no sim right now but @Jammol @chipworkz can you guys try and verify call audio i can only confirm it boots and works perfectly but cant test audio
mastergrillo said:
I made a kit for those who want to use Android 6.01 Roms from the international threads on the N920T and N920W8 with working call audio
1. Download desired Intl ROM
2. Download This KIT
3. Download TWRP
3. Download SuperSU 2.71 BETA
4. Using ODIN flash the BL and CP files
5. Using ODIN flash TWRP and reboot in to TWRP
6. Install desired Intl ROM and reboot in to Download Mode
7. Using Odin flash boot.tar and reboot in to TWRP
8. Install N920T MM Call audio fix and SuperSU 2.71 BETA and reboot
9. Enjoy
i didn't provide the supersu zip, ODIN, and TWRP please search for those files in the threads
not responsible any damaged caused by this kit and please back-up before flashing anything
Also anyone is welcome to use the files in your ROMS just give credit
Click to expand...
Click to collapse
I get an md5 error binary invalid when trying to flash the files.
Rename i mean delete .md5 and leave it with .tar it should go well
JonathanRAZ said:
Rename i mean delete .md5 and leave it with .tar it should go well
Click to expand...
Click to collapse
Thanks for helping
Sent from my SM-N920T using Tapatalk
JonathanRAZ said:
Rename i mean delete .md5 and leave it with .tar it should go well
Click to expand...
Click to collapse
Thanks for helping what rom did you use?
I only tried Decent M3.5 so far but whoever uses this provide feedback to what rom your using and if call audio is working
Sent from my SM-N920T using Tapatalk
mastergrillo said:
Thanks for helping
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Will try my best thanks to you for helping the tmo guys
I flashed the simple s7 edge rom i mean i dont see all stuff like the modified stuff maybe is because there no kernel? I only have s7 edge side panel but stuff like keep playing music while recording and the call record stuff like that i dont see them does your decent rom have all features like it says or ??? I am confused in this part
Btw step 4 i skipped it because i was already on tmo bl and cp
And step from boot.tar the boot img is the stock from the n920tw8 tar??? Or is different?
Stock n920w8 tar since there is no custom kernel yet i put together the zip for people who want to try MM coming from LP but if you have MM BL and modem already there is no need to flash those again
Sent from my SM-N920T using Tapatalk
Ok so i did this maybe you can add if they are already on mm bl and cp and they have extracted the n920w8 boot.img that step since didnt want to use odin i flashed the boot img on twrp i mean it can be another optional step if they dont want to use odin and are already on mm cp bl
JonathanRAZ said:
Ok so i did this maybe you can add if they are already on mm bl and cp and they have extracted the n920w8 boot.img that step since didnt want to use odin i flashed the boot img on twrp i mean it can be another optional step if they dont want to use odin and are already on mm cp bl
Click to expand...
Click to collapse
In call audio is working or not?...
JonathanRAZ said:
Rename i mean delete .md5 and leave it with .tar it should go well
Click to expand...
Click to collapse
Awesome! That worked. Now running MyLiluthS7 Edge rom from the international section. Call audio works. Tested by calling the cable company and they have a voice prompt automated system. Recognized everything. Tested a few SMS. Perfect!! So excited to see how MM works on this device. Thanks again to both you and the OP.
ebusuhejbi said:
In call audio is working or not?...
Click to expand...
Click to collapse
OP states it works and i stated that i have no sim i confirmed some stuff on some posts on this thread you can flash and test and give feedback to OP he really needs it
Sent from my SM-G935F using Tapatalk
ebusuhejbi said:
In call audio is working or not?...
Click to expand...
Click to collapse
It works. Running an international rom too.
the.emilio said:
Awesome! That worked. Now running MyLiluthS7 Edge rom from the international section. Call audio works. Tested by calling the cable company and they have a voice prompt automated system. Recognized everything. Tested a few SMS. Perfect!! So excited to see how MM works on this device. Thanks again to both you and the OP.
Click to expand...
Click to collapse
Your welcome but all credits to OP btw does all the features work on myliluths7???
Sent from my SM-G935F using Tapatalk
JonathanRAZ said:
Your welcome but all credits to OP btw does all the features work on myliluths7???
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
So far they seem to. S Pen works did few screen writes to test it out. Edited the App Edge feature to put my own apps as I see fit. Pretty decent light rom. Looks like the dev wasn't trying to go overboard with it which is what I prefer. Don't need all the extra bells and whistles like 3minit or potato clock. Theyre nice additions but I have no use. This rom seems perfect for my daily use.
Thanks OP!
I'm starting to think we're working harder than T-Mobile and Samsung, delivering MM for the T-Mobile Note 5.
Sent from my SM-N920T using Tapatalk
Hi. Thanks for this. I've tried to download the KIT but when using the Mega App it gets stuck on preparing download, but when in Desktop mode it asks for a decryption key. Any help?
Numzi said:
Hi. Thanks for this. I've tried to download the KIT but when using the Mega App it gets stuck on preparing download, but when in Desktop mode it asks for a decryption key. Any help?
Click to expand...
Click to collapse
Try it again for me is working good do you have the latest mega ??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G928F using Tapatalk
JonathanRAZ said:
Try it again for me is working good do you have the latest mega ??
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
Yeah I just tried it again after restarting my phone. It still gets stuck on preparing. I also reinstalled Mega. It's the Mega Official one right?