Hi guys, my little cousin have this phone and ive been tweaking it for him since he bought it like year and a half ago. Th phone was on CM11 with the mount sd script and it was working fine. Now suddenly stopped turning on. My cousin says he was charging the phone being off and that it reached 100% in about 30 minutes what it was weird he says. He unplugged the phone and now it dosen't tur on, the pc dont make any sound when is plugget into it nor shows anything in the Windows device administrator, the charger don't make the screen turn on. I tried 2 cables and 2 chargers. I think that the board got fried maybe a electrical fucltuation in his house, an overvoltage, dont know how you guys call it, we're from venezuela. Any help or explanation will be welcome.
Sorry for my english.
Well, I've found that off-mode charging was a bit buggy in CM 11 but didn't know it could fry a board.
Try to do current flush :
i. take out the battery
ii. try to switch on the phone (battery being removed) by pressing the power button for 3-4 seconds.
iii. reinsert the battery and switch on the phone.
----------------------------------------------------------
If this doesn't work then sorry it maybe a hardware fault.
Related
Hey all, I just got through with this hurricane sandy business and now I find my phone not working at all. First off I'd like to say that there is no water damage to this phone and it is NOT rooted. The problem is that it just won't turn on at all, and won't charge when I try to charge the device. The day before I charged the phone and it worked fine. I can provide more details if needed but I need to find a solution to this.
Did it run down on battery completely before it did this? You might need to charge it for a bit before it turns on. Also, see if you can get your hands on a spare battery to see if it's the battery's problem. I would also try removing the battery and putting it back just to make sure it wasn't jostled loose.
bananagranola said:
Did it run down on battery completely before it did this? You might need to charge it for a bit before it turns on. Also, see if you can get your hands on a spare battery to see if it's the battery's problem. I would also try removing the battery and putting it back just to make sure it wasn't jostled loose.
Click to expand...
Click to collapse
Two days ago I completely let the battery drain on its own because it was draining faster than usual and I was using it very minimally due to the lack of phone signal during the power outage. And yesterday I charged it until it was 100% in the morning and at night I charged it again until 100%. Before I went to bed, I turned off my phone and it was 90% and when I turned it on in the morning it was at 77% (which I thought was weird since the phone was not even on). Now the phone will not work at all. I took the battery out and everything. I even tried turning the phone on while trying to charge it (but it would not charge). The only feedback I got was that it vibrated when I tried turning it on this afternoon and after that was nothing. (it would either get stuck at the AT&T bootup part or I would get no display at all)
mpvsuperstar said:
Two days ago I completely let the battery drain on its own because it was draining faster than usual and I was using it very minimally due to the lack of phone signal during the power outage. And yesterday I charged it until it was 100% in the morning and at night I charged it again until 100%. Before I went to bed, I turned off my phone and it was 90% and when I turned it on in the morning it was at 77% (which I thought was weird since the phone was not even on). Now the phone will not work at all. I took the battery out and everything. I even tried turning the phone on while trying to charge it (but it would not charge). The only feedback I got was that it vibrated when I tried turning it on this afternoon and after that was nothing. (it would either get stuck at the AT&T bootup part or I would get no display at all)
Click to expand...
Click to collapse
And nothing happened to it in between at all? That's very odd. The only thing I can think of to try is another battery.
Please post all questions in the Q & A section. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2
bananagranola said:
And nothing happened to it in between at all? That's very odd. The only thing I can think of to try is another battery.
Click to expand...
Click to collapse
Nothing I can think of. It was fully charged by 9PM the other night and shut off before I went to bed. Next morning the batter is nearly halfway drained for no apparent reason. I think I will get another battery to test.
Also I let the battery sit out of the phone for a few days now and the phone still does not work.
Niavaran
mpvsuperstar said:
Nothing I can think of. It was fully charged by 9PM the other night and shut off before I went to bed. Next morning the batter is nearly halfway drained for no apparent reason. I think I will get another battery to test.
Also I let the battery sit out of the phone for a few days now and the phone still does not work.
Click to expand...
Click to collapse
***
Get a hold of a charged battery, then after 1 hour with no battery in the device, replace the battery remove the SD-Card and the SIM-Card, replace all covers. Reboot your PC and go to firewall tab in the control panel and turn of your firewalls, then reboot your PC, then using USB data cable not a charging cable.. with your device being OFF conect to a USB connection in the back of your PC, if it's a laptop use the one next to the intranet connection. Then wait about 1min. If nothing happwned, hold the volume down button then press and release the power button. if nothing happened, hold the volume up then press and release the power button. If nothing happened do the samething this time by holding both up and down volume buttons. If nothing happened with your device connected to the PC go to MY Computer tab right click on C>Properties then go to tools click on check disc tab check mark both options then restart your PC. Before windows tour OS starts, your PC will go through a self check. let it do its thing. it takes a couple of hours. then after its down check to see if it has seen your device. if not then do procedures above once again. GOOD LUCK.
PHP:
Okay so I finally got it to turn on but in order to charge it, the phone must be turned off for some reason. Also, the touch screen is not working, even after I did a hard reset and erased all my data. I'm not sure if it is a hardware issue or a software issue because the display is working fine.
lobig
mpvsuperstar said:
Okay so I finally got it to turn on but in order to charge it, the phone must be turned off for some reason. Also, the touch screen is not working, even after I did a hard reset and erased all my data. I'm not sure if it is a hardware issue or a software issue because the display is working fine.
Click to expand...
Click to collapse
That same thing happened to a friend of mine. She took it to a technician tho and they sorted it out for her.
Hello every one, this just my first post here, but I have been follow the forum very very close since some days ago thanks to Mustaavalkosta and his new CyanogenMod Rom here:http://forum.xda-developers.com/showthread.php?t=2533007&page=283.
I am having a similar problem with my HTC Inspire, here is my story. I bought it like it a year ago, the first thing I do was to rooted with AAHK and install CyanoyenMod cm-7-20130301-NIGHTLY-ace. Everything works just fine till a couple of months ago. One night I just leave my Inspire and go to sleep, the next morning I wasn't able to turn on, not charging, not turn on. Was not the battery because my brother has another Inspire and I check with his battery. I just leave the phone without the battery and Sim and SD for a day and them come back again, but at next day the same occurs. I try all that time, vol down+power. voldown+volup, every convination but nothing works. So I decide to dissensambly my phone... in the process I broke the ribbon flex cable http://www.ebay.com/itm/OEM-HTC-Desire-HD-Inspire-4G-Camera-Socket-Keypad-Membrane-PBC-Ribbon-Flex-Cable-/320925341841?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item4ab8a41891 The phone was in parts on my table like a month till I was able to buy and recieve the ribbon (I live in Colombia). Finally the ribbon arrives 3 days ago, so I assembled the phone again and...magic! the phone turns on. My next step was install the Mustaavalkosta Rom that I mentioned before.... but, yesterday, my phone was dead again. So a try all steps again, put out the battery, Sim and Sd... and again try all the combinations of buttons, but nothing works... So I do it again: dissensably again my phone: Only disconnecting the display doesn't works... I have to disconect the display and the ribbon cable, assembled again and just turn on again.... Now I am waiting for the next black out...
I know is a weird behavior, but may be some one can point me in some direction to fix it.. I am not a developer or anything like that, but I like to investigate and solve problems... any help will be wonderful.
Cheers!
PD: I dont have any apps installed, just trying the Rom as it is.
PD: The next time it happens I will try the niavaran advises.
I have a Samsung i727R. I’ve had the phone for about a month. Have not used it a lot, no rooting, just ‘normal’ usage. I have not downloaded anything interesting at all.
The problem started a couple weeks ago. It started when I plugged the phone in to charge and nothing happened. I could still turn the phone on and everything worked fine, but it just would not charge. This makes me believe it is not the battery.
So I bought a new OEM cable. It still would not charge (not into the wall or computer. BTW my computer has never recognized that my phone was plugged into it since I’ve had, which I assume is an unrelated issue). But I decided to leave it plugged in longer, and after about an hour, it started doing a short vibration every few seconds, and every few minutes it would just turn on and stay on until I turned it off. Still does not charge. This makes me believe it is not the cable.
I have read about the sticky power button. The power button seems to be working fine (it feels fine / not sticky), and I can turn it on and off without a problem, and operates normally. It just starts on its own as well when plugged in.
Could it be the charging port? I’m unsure because the vibration only happens when I plug it in, so the phone is recognizing that it is plugged in; it’s just not charging.
If not the charging port, what else could it be?
any takers? if you know the answer is posted elsewhere, please direct me where to go. I don't think its the sticky button problem, so not sure what next.
ok, I've had no responses from other members, so I dismantled and checked out the power button, as my problem has some symptoms of the power button problem. but after cleaning, pushing, reassembling, there is no change from the situation I described above.
there is one bit of new info: I left the phone plugged in (it turned on after about 4 vibrations, as usual), but while it is on and plugged in, every minute or so the message indicates it is charging! this lasts for about 5 seconds, and then it proceeds to tell me to plug it in again.
really sounds like it would be a poor connection (replace the charging port?), but seems odd that the pattern of events would be so consistent. if the phone had a poor connection, I would think it would work well for a bit, and then not work at all for a bit, etc.
please help!
frankenish said:
ok, I've had no responses from other members, so I dismantled and checked out the power button, as my problem has some symptoms of the power button problem. but after cleaning, pushing, reassembling, there is no change from the situation I described above.
there is one bit of new info: I left the phone plugged in (it turned on after about 4 vibrations, as usual), but while it is on and plugged in, every minute or so the message indicates it is charging! this lasts for about 5 seconds, and then it proceeds to tell me to plug it in again.
really sounds like it would be a poor connection (replace the charging port?), but seems odd that the pattern of events would be so consistent. if the phone had a poor connection, I would think it would work well for a bit, and then not work at all for a bit, etc.
please help!
Click to expand...
Click to collapse
u answered ur own question, bad connection, its either the cord or charging port or batterycontacts or even a bad battery but more likely a connection prob
S2 SKyrocket wont start up!
k, so here is the scenario. I have rooted and have jelly bean running since the official update came out from at&T. It has been working fine. No issues just some bug with the camera and the pictures that I managed to deal with. 2 Days ago my phone after battery reached 1% went dead. It has happened before, I just plug it in and charge, everything works smooth. Until, the phone never charged and when I attempted to turn on it just vibrates once , Samsung logo quickly comes up and disappears.
I know its not a sticky Power button issue as the phone does not start up when I insert the battery. I attempted to go into recovery mode but nothing happens.
Don't think the phone is bricked since it shows some kind of life. Not sure if I should buy another battery or charge the battery on another device...While I try to troubleshoot this. Does anyone have any suggestions, and IF i have missed a sticky please direct me to it, since their is so much content here.
Thank you in advance!
Hi
I bought my relay from ebay http://goo.gl/GbQ1Nt just started using the phone today.. I put my SIM card of a carrier from Peru and it worked just fine. Everything was running smoothly.. I was making phonecalls and texting.. I put my gmail account and started downloadign some apps..
After a couple of hours, the battery was almost dead so I plugged it..
After five minutes, the screen turned off out of the blue.. and I haven't been able to turn it on since
It won't turn on, nor enter recovery or download mode
I'm not even sure it is charging.. when i plug it the red led turns on.. but there is no other charging indicator..
I'm in Peru so returning it is a bit o f a challenge.. I was just wondering if any of you guys know what could be wrong..
Thanks
qqisa said:
Hi
I bought my relay from ebay (http://goo.gl/7v8j1Z)I just started using the phone today.. I put my SIM card of a carrier from Peru and it worked just fine. Everything was running smoothly.. I was making phonecalls and texting.. I put my gmail account and started downloadign some apps..
After a couple of hours, the battery was almost dead so I plugged it..
After five minutes, the screen turned off out of the blue.. and I haven't been able to turn it on since
It won't turn on, nor enter recovery or download mode
I'm not even sure it is charging.. when i plug it the red led turns on.. but there is no other charging indicator..
I'm in Peru so returning it is a bit o f a challenge.. I was just wondering if any of you guys know what could be wrong..
Thanks
Click to expand...
Click to collapse
The link you posted for the auction doesn't work. Wanted to check if you got it new or used. One thing I've noticed with mine is that I have to hold down the power button for a second or two to get it to turn on (seemed like it was a little bit longer than other phones I've had).
Outside of that it sounds like it might be some kind of hardware problem. Might even just be a bad battery. One thing you could try is using an external charger for the battery if you have a universal lithium ion charger or if you know someone who has one. That way you might be able to narrow it down to a problem with the charging circuit in the phone.
jgummeson said:
The link you posted for the auction doesn't work. Wanted to check if you got it new or used. One thing I've noticed with mine is that I have to hold down the power button for a second or two to get it to turn on (seemed like it was a little bit longer than other phones I've had).
Outside of that it sounds like it might be some kind of hardware problem. Might even just be a bad battery. One thing you could try is using an external charger for the battery if you have a universal lithium ion charger or if you know someone who has one. That way you might be able to narrow it down to a problem with the charging circuit in the phone.
Click to expand...
Click to collapse
thanks for replying
I've edited the link
I tried an external power bank but it didn't even turn it on.. so I narrowed it like you said to: the battery is so messed up it won't even charge or the battery is fine but the whole charging circuit is wrong.
Then I took it to an electrician and he said the battery had energy and should start the phone, but it didn't.
After that he charged the battery alone for a little bit with his "whatever kind of car-battery-like thing" but it still was not turning the phone on.
When I came home I plugged it once more to the external powerbank and some how the charging animation appeared..
I let it charge for a while but it didn't seem to progress, so i turned it on and holly crap it turned on
but after the boot animation it vibrated and turned off and now it's not charging again
man.. i thought i had it
any thoughts?
i've read about something called sticky power button.. its a hardware problem in the galaxy sII model.. could it be related?
Not sure about the sticky power button I've never had it happen to me. I would think that when you had it on it would have popped up the reboot menu like when the power button is being held down. If it were me I would contact the seller.
i returned to the electrician and he recharged a little bit more the battery..
this time it did turned on and it reached the lockscreen it said 1%
so I plugged it.. and it now stays on.. and it says charging but stays at 0%.. doesn't advance.. is it a battery issue or a charging circuit issue?
forget about the sticky power button
I recently dropped my phone on the ground and the glass is now broken. But it worked normally for about 14 days. Then suddenly one day at work it shut down on its own. After that I wasn't able to start it. No reaction for any of the buttons, nor their combinations. Even when I plugged the charger in, no sign of life. I thought it's over.
Then the next day, I plugged the charger in and the screen with 0% battery appeared. So I left it charging, but when I came back to it (20 minutes) it was dead again. Not even the diode indicating it is charging. Again no response for the buttons, nothing. So I tried to disassemble it, disconnected everything. Put it together and viola! The screen indicating 0% battery was there again. I left it like that for a while, and when it was charged a little, I tried to start it. It started and normally worked. At least it seemed to, but after a while (1 - 3 minutes) while I was using it, it went to the dead phone again.
So I discovered, that when I disconnect the battery for a while and then connect it again, I am able to boot the phone. I was even able to do factory reset. I thought I got it and that it was some software fault. However after like 5 minutes (it downloaded all apps, logged to my google account, looked all ok) the screen shut down again and again the phone played dead.
Now I have the phone booted, and charging (almost 100% now). But I guess when I start using it again, it will again go to the dead mode (since it did it everytime after I used it a little, no specific action done, totally random).
I guess it has to be related to the broken glass. Maybe some water or humidity got through it and the phone is trying to save itself from damage by going to the dead mode. It's weird because sometimes (like now) the phone is OK when not used, normally chraging and not shutting down (now it's ON for about 40 minutes), but if it shuts down, it takes about 3 or 4 battery disconnect and connect again, before it boots to the main screen. Sometimes it just dies before the screen, sometimes it dies when I try to plug the charger in, really no idea what causes it.
How should I diagnose it? USB debugging and check the log when using it and when it dies? Or has anyone experienced this too? Or could the battery be damaged? Or can I somewhere set the phone to prevent from selfkilling actions? Today I will try my main board in my friends G Flex 2, to see if it's the board, or something else.
Error log from console before it shut down
mazlixek said:
I recently dropped my phone on the ground and the glass is now broken. But it worked normally for about 14 days. Then suddenly one day at work it shut down on its own. After that I wasn't able to start it. No reaction for any of the buttons, nor their combinations. Even when I plugged the charger in, no sign of life. I thought it's over.
Then the next day, I plugged the charger in and the screen with 0% battery appeared. So I left it charging, but when I came back to it (20 minutes) it was dead again. Not even the diode indicating it is charging. Again no response for the buttons, nothing. So I tried to disassemble it, disconnected everything. Put it together and viola! The screen indicating 0% battery was there again. I left it like that for a while, and when it was charged a little, I tried to start it. It started and normally worked. At least it seemed to, but after a while (1 - 3 minutes) while I was using it, it went to the dead phone again.
So I discovered, that when I disconnect the battery for a while and then connect it again, I am able to boot the phone. I was even able to do factory reset. I thought I got it and that it was some software fault. However after like 5 minutes (it downloaded all apps, logged to my google account, looked all ok) the screen shut down again and again the phone played dead.
Now I have the phone booted, and charging (almost 100% now). But I guess when I start using it again, it will again go to the dead mode (since it did it everytime after I used it a little, no specific action done, totally random).
I guess it has to be related to the broken glass. Maybe some water or humidity got through it and the phone is trying to save itself from damage by going to the dead mode. It's weird because sometimes (like now) the phone is OK when not used, normally chraging and not shutting down (now it's ON for about 40 minutes), but if it shuts down, it takes about 3 or 4 battery disconnect and connect again, before it boots to the main screen. Sometimes it just dies before the screen, sometimes it dies when I try to plug the charger in, really no idea what causes it.
How should I diagnose it? USB debugging and check the log when using it and when it dies? Or has anyone experienced this too? Or could the battery be damaged? Or can I somewhere set the phone to prevent from selfkilling actions? Today I will try my main board in my friends G Flex 2, to see if it's the board, or something else.
Click to expand...
Click to collapse
Adding the error log from console
OK so it was probably mother board fault, so I had to buy a new phone It is like 3 months, and I just yesterday accidentally poured some water on it, so i destroyed another one. It is still in warranty but I guess with water damage there is no warranty. Anyone knows where to find all the water damage indicators? Or is it even possible to make it look like there was no water damage?
Welcome, i've readed alot of topics on the internet about problems similar to this, but nothing fixed my problem. I've tried connecting to wall/pc charger, power button + volume down/up combinations, really all the thing.
Couple days ago after my phone fully discharged ( I rarely had situation like this, I usually charge when my phone have 10-15%, but this day I couldn't. ) I came back home and tried to charge my phone, red light was ON but it still didn't charge after alot of hours. I then tried to fix it, turning on phone etc. but screen was always black and phone didn't want to charge. At first when I tried to boot the Z3 red light was blinking, but after some time it stopped. I ordered new battery, replaced it carefully (though it's battery problem) - then when I connected the new battery for the first time I though I have fixed the problem, battery charging icon showed up for a moment on screen, I was very happy. Then I disconnected charger so I could assemble my phone. Now when I try to charge my phone problem is this same.. like with old battery - Just red light, not turning ON, not blinking. Powering up Key combinations with volume don't fix it. My PC Companion don't see phone. I disassembled my phone again, disconnected battery and connected it - It didn't showed any battery icon again, so why it did when I connected it for the first time? and why when my phone died for the first time red light was blinking, now it doesn't? I want to add that I never dropped my phone or used it in water - never, thats why I was almost sure maybe just battery died after it discharged.
Btw. Important thing is that USB port isn't broken, red light is always ON when I plug USB charger, but when I try to use my magnetic charger, phone never respond - no light. I also tried different cables, chargers etc. Could it really be something with the mainboard?
What could've happen? Why my phone went dead after fully discharged it ? Why battery replacement doesn't fix the problem? I don't get it, is mainboard damaged or something? Can I still try something? Maybe anyone can help me.
Please :/ I cannot afford a new phone right now, really want to try fix it, maybe somehow connecting USB cable straight without usb port can fix it? I heared people do something like this.