Related
Hi, it all started when I tried to install another ROM for my moto g xt1033. I accidentally deleted OS and storage.
Now it is struck at Warning bootloader unlocked screen. I can't even go into recovery mode.
I guess I hard bricked it.
Please help.
Thanks.
Have you tried to reboot into fastboot mode? Hold power button 5 seconds, after it reboots hold vol- key for some time and release it. If You booted into Flashboot mode you can install recovery or restore full system.
kuba_160 said:
Have you tried to reboot into fastboot mode? Hold power button 5 seconds, after it reboots hold vol- key for some time and release it. If You booted into Flashboot mode you can install recovery or restore full system.
Click to expand...
Click to collapse
Yes I tried. It reboots with a small vibration to bootloader unlocked screen again.
It's not detected by fastboot when you connect it?
kuba_160 said:
It's not detected by fastboot when you connect it?
Click to expand...
Click to collapse
No.. I tried... It just stops at waiting for devices..
Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.
Meiton said:
Hi,
I was trying to flash TWRP, but now I am stuck with flashing TWRP logo after rebooting or powering the phone on.
I am unable to get to the fastboot.
STEPS I did before brick:
1. unlocked OEM via official way
2. flashed TWRP
3. after that my phone was reset however most of the apps was missing, I was trying to do factory reset once again but it failed with the message "Data partition was heavily damaged"
4. I re-locked EOM
5. brick as mentioned above
Please help, I have the phone only two weeks and I have no idea how to fix this without fastboot.
Thank you.
Click to expand...
Click to collapse
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk
clsA said:
Sounds like you flashed the 3030 version of TWRP. Download the 3020 version and put it in your fastboot folder. Plug in the USB to PC
Hold power and volume up untill the phone reboots. While it's still off immediately change to power and volume down and hold till it goes into fastboot (bootloader)
Now fastboot flash recovery TWRP.img
With the 3020 version.
Unplug the USB and hold power and volume up until it says the phone is booting.. let go and TWRP will load.
Go to Wipe / format data / type yes
Reboot to system and your all set
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.
Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces
Clearly follow My steps To unbrick and get normal device ::
Step 1 ::
Download the full firmware of your device.
Step 2 :
make sure that your bootloader is in unlocking state
Follow the video blindly ::: https://youtu.be/OMKDnBqbi3U?list=PL...eT9J26lkefvVkK
don't panic of mobile.
Step 3 :: done ..enjoy u did it
--------------------------------------------------------------------------
If you bricked on nougat then follow the below steps
step one :::
download the downgrade package to mm .
then extract the zip and open the update.app using HuaweiUpdateextrator in that select recovery and extract
1.now, boot your device into fastboot and flash the recovery (Optional)(try this if it said incompatible version on recovery)
2. on your sd card and make a folder "dload" . and copy the update.app which we have extracted earlier
3.the switch off the device and press all three buttons you will be reboot into recovery and done . you device will be okey
Meiton said:
So I've tried that but the phone is still booting to recovery (flashing TWRP logo) no matter what.
Basically the phone is always on now because if hold the power button (or any other combination) for a few second it will just reboot back.
I have an access only to ADB, but I am not able to boot to bootloader at all, it seems the bootloader is damaged somehow.
Also that warning about unlocked OEM doesn't have that text saying "hold volume up to boot to recovery" etc. like before brick.
Click to expand...
Click to collapse
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk
clsA said:
Booting to the bootloader is just a timing issue
Phone must be hooked to PC with USB
And volume up and power till it goes black
Then immediately volume down and power and Hold untill the bootloader loads
Keep trying until you get it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
I appreciate your help but I've tried it multiple times always with the same result.
I also can use "adb reboot bootloader", but it will reboot again to stuck recovery.
DJ Daemonix said:
Hi there,
Try using the Huawei Multi Tool with the Unbrick option : https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Speaking from experience, this little fellow helped me recover my phone when I bricked it ON DAY ONE after failed root attempt... (Derp)
Let me know if it helped you
(Leave a thanks if it did )
EDIT : This tool is also useful if you want to get lazy whilst rooting. I use it constantly when flashing diffrent bits and pieces
Click to expand...
Click to collapse
I've tried that, but I am still stuck as that tool is using fastboot as every other tool to flash .img files.
Thank you for the tip though.
Plug phone into computer with USB, then hold down power + volume down until it eventually boots into bootloader. I had the same scenario as you and that's how I got into the bootloader. You can flash either a good TWRP or the stock recovery, either one will work.
1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1
problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?
To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.
Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408
phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever
nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.
Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...
I want to android 6.0 as twrp. How ? Pls
That is only for unlocked bootloader??
Link in Step 12 for Nougat s broken
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!
I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!
Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers
Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?
zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Hello everyone, i have an honor 8 frd-l09c432(europe)
so i flashed a wrong kernel in twrp and fastboot
and now the phone can't boot
i can get into fastboot and flash stuff
erecovery works in factory resetting and cache partition cleaning
my bootloader is unlocked
my phone is frp unlocked
when i flash twrp in fastboot and reboot to recovery, it doesn't boot twrp but the stock recovery ( idk why )
so anyone can help ?
and when i put my phone in charge when its off
a message appears to update again
no : 10 ( boot image
no : 2 ( load failed )
which im guessing its because of the wrong kernel flash
so what should i flash in fastboot to unbrick my phone ?
i have update.app extracted and etc ... ( please please if anyone can help )
OPTION 1: MAYBE MIGHT BE WHY FLASHING MIGHT NOT BE WORKING
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen. Try to boot into fastboot without the errors on the screen.
OPTION 2: FLASH STOCK KERNEL IMAGE
You can flash kernel images using adb:
"fastboot flash kernel [KERNEL.IMG]"
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen.
OPTION 3: IF YOU WANT TO BOOT INTO TWRP WITHOUT FLASHING
1. Connect device to computer and boot into fastboot, make sure that you are not on the error fastboot look alike screen because I dont think you can flash files when on that screen error screen.
2. On adb, do "fastboot boot [Recovery File]"
3. It should boot into the recovery file you put in there
OPTION 4:: RESET DEVICE FROM ERECOVERY FROM "recovery2"
If those did not work, restart you device and when it says "Your device has been unlocked and can't be trusted", quickly hold volume up until you have booted into a stock recovery look alike "recovery2", which has an extra button.If you do not have the button, you need to hold the volume up button faster on the "Your device has been unlocked and can't be trusted" screen. When on the stock recovery look alike screen,, click the option that says something about download latest firmware. Select your wifi and it should download stock oreo and fix device, but though, it will factory reset device.
The Honor 8 has 2 recoveries called maybe "recovery" where you usually flash twrp and "recovery2" when you hold the volume button up on "Your device has been unlocked and can't be trusted"
The bootloader should relock after this
if you manage to boot into twrp and reflash back to the kernel then you dont have to do this.
CHECK_123 said:
OPTION 1: MAYBE MIGHT BE WHY FLASHING MIGHT NOT BE WORKING
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen. Try to boot into fastboot without the errors on the screen.
OPTION 2: FLASH STOCK KERNEL IMAGE
You can flash kernel images using adb:
"fastboot flash kernel [KERNEL.IMG]"
Make sure that you are not trying to flash the recovery.img on the error fastboot look alike screen, because I dont think you can flash files when on that screen error screen.
OPTION 3: IF YOU WANT TO BOOT INTO TWRP WITHOUT FLASHING
1. Connect device to computer and boot into fastboot, make sure that you are not on the error fastboot look alike screen because I dont think you can flash files when on that screen error screen.
2. On adb, do "fastboot boot [Recovery File]"
3. It should boot into the recovery file you put in there
OPTION 4:: RESET DEVICE FROM ERECOVERY FROM "recovery2"
If those did not work, restart you device and when it says "Your device has been unlocked and can't be trusted", quickly hold volume up until you have booted into a stock recovery look alike "recovery2", which has an extra button.If you do not have the button, you need to hold the volume up button faster on the "Your device has been unlocked and can't be trusted" screen. When on the stock recovery look alike screen,, click the option that says something about download latest firmware. Select your wifi and it should download stock oreo and fix device, but though, it will factory reset device.
The Honor 8 has 2 recoveries called maybe "recovery" where you usually flash twrp and "recovery2" when you hold the volume button up on "Your device has been unlocked and can't be trusted"
The bootloader should relock after this
if you manage to boot into twrp and reflash back to the kernel then you dont have to do this.
Click to expand...
Click to collapse
Hi, Thanks for the fully informative reply
I got my phone unbricked a week after this thread but somehow i completely forgot to close the thread
so, sorry about my mistake, I'm new to xda
have a nice day
Newbie here. Tried to download TWRP onto unrooted device (Galaxy Note10 Exynos d1) with Odin and now my phone is stuck on "downloading" screen. When I try to cancel (restart phone) it goes to the startup/booting screen for less than a second and then jumps back to "downloading". It says this at the top left corner of the screen:
recovery: Error validating footer (6) CUSTOM RECOVERY VBMETA N970F XXU1 ASG0. 24967245R
I am able to get into the custom OS installation screen (don't know what it's actually called but second picture) by letting the battery drain so that the phone turns off and then holding volume up + volume down key and plugging the phone into my laptop with USB.
The bootloader is unlocked. I went to https://twrp.me/samsung/samsunggalaxynote10.html and even there it says "Flashing TWRP without first flashing a vbmeta image with verity disabled will render your device unable to boot." Does anyone know how to fix this? Thanks in advance.
TheAckermans said:
Newbie here. Tried to download TWRP onto unrooted device (Galaxy Note10 Exynos d1) with Odin and now my phone is stuck on "downloading" screen. When I try to cancel (restart phone) it goes to the startup/booting screen for less than a second and then jumps back to "downloading". It says this at the top left corner of the screen:
recovery: Error validating footer (6) CUSTOM RECOVERY VBMETA N970F XXU1 ASG0. 24967245R
I am able to get into the custom OS installation screen (don't know what it's actually called but second picture) by letting the battery drain so that the phone turns off and then holding volume up + volume down key and plugging the phone into my laptop with USB.
The bootloader is unlocked. I went to https://twrp.me/samsung/samsunggalaxynote10.html and even there it says "Flashing TWRP without first flashing a vbmeta image with verity disabled will render your device unable to boot." Does anyone know how to fix this? Thanks in advance.
Click to expand...
Click to collapse
Go first to the unlocking menu to check if your device is really unlocked, long press volume up, and see which the menu says.
If it is unlocked, then flash the vbmeta file provided, then try to boot to recovery and perform a factory reset.
SubwayChamp said:
Go first to the unlocking menu to check if your device is really unlocked, long press volume up, and see which the menu says.
If it is unlocked, then flash the vbmeta file provided, then try to boot to recovery and perform a factory reset.
Click to expand...
Click to collapse
Bootloader is unlocked and I've flashed the vbmeta file but now my phone is stuck on the startup screen and I can't seem to boot into recovery. Why?
TheAckermans said:
Bootloader is unlocked and I've flashed the vbmeta file but now my phone is stuck on the startup screen and I can't seem to boot into recovery. Why?
Click to expand...
Click to collapse
Maybe you missed some essential part of the process, by unlocking your device through the Download menu option your data has to be erased, it's recommendable after to unlock the bootloader, to reboot again to system and check once the UBS debugging and OEM unlock options if they remain fine, from there you should reboot to download mode again, uncheck the Auto-reboot option within Odin, flash the vbmeta.tar and then flash the TWRP, if all till here goes well you should reboot manually to TWRP by powering off completely, pressing the three buttons, and just now, pressing the volume up + PWR key buttons till your device boots to TWRP.
SubwayChamp said:
Maybe you missed some essential part of the process, by unlocking your device through the Download menu option your data has to be erased, it's recommendable after to unlock the bootloader, to reboot again to system and check once the UBS debugging and OEM unlock options if they remain fine, from there you should reboot to download mode again, uncheck the Auto-reboot option within Odin, flash the vbmeta.tar and then flash the TWRP, if all till here goes well you should reboot manually to TWRP by powering off completely, pressing the three buttons, and just now, pressing the volume up + PWR key buttons till your device boots to TWRP.
Click to expand...
Click to collapse
Thanks for the help, tough i am struggling to get acces to the download menu option. Could you give me a example to acess the menu?
TheAckermans said:
Thanks for the help, tough i am struggling to get acces to the download menu option. Could you give me a example to acess the menu?
Click to expand...
Click to collapse
The screenshots you uploaded some months ago, are the download screen, you, successfully did boot to, download mode doesn't have a useful menu, it's just a mode, so you can flash some things, using Odin. To boot to, use the same way you did it previously, usually, doing it manually, or if you are rooted, you can use other ways too.