Related
For some odd reason, when i connect the headset from htc to listen to music, the speaker also outputs sound while the headset functions normally, in other words - both the headset and the speaker output sound, when the headset is disconnected, the speaker increases it's volume output - it's really annoying as i want only the headphones to output sound, can someone please help so that i can turn off the speaker sound? i don't think i experienced this before, either it's a loose connection on the headset or i turned on something by mistake.
p.s: i've checked the headset, it's connected properly and it's not loose.
can someone please help? thanks
nevermind, it's working fine now.
Wow, you are one lucky bandit.
I am coming from using a Motorola Q9H. When paired with my bluetooth headset (Plantronics Voyager 520), the Q9H would deliver all audio (phone calls, notifcation sounds, Skyfrie, Youtube, etc) through the bluetooth headset. The Fuze doesn't seem to do this. Is there a way to force this functionality, though? I have Advanced Config installed, if that helps any.
Please search the forum. This has been covered many times.
Hint look in Setting/Personal look in there for your answer!
bangbang023 said:
I am coming from using a Motorola Q9H. When paired with my bluetooth headset (Plantronics Voyager 520), the Q9H would deliver all audio (phone calls, notifcation sounds, Skyfrie, Youtube, etc) through the bluetooth headset. The Fuze doesn't seem to do this. Is there a way to force this functionality, though? I have Advanced Config installed, if that helps any.
Click to expand...
Click to collapse
I can't get all sounds through my voyager 520 either. I can do it with my Cardo S-2 stereo bluetooth headphones though, it seems like the Raphael doesn't support that out of the box for non-A2DP profile devices. Sound quality for anything but phone conversations suck through a regular headset anyway. You should really invest in some stereo bluetooth headphones, it's worth it!
Well, the only reason I want to do it is for the odd Youtube video on the bus and such. Quality isn't a concern since I don't listen to music from my phone.
I recently got a set of bluetooth stereo headphones, but before I did, this worked fine for me.
wmm said:
I recently got a set of bluetooth stereo headphones, but before I did, this worked fine for me.
Click to expand...
Click to collapse
Thank you. I'm going to try that after work.
One thing, if I leave the toggle on, and then disconnect the BT, will it then play the sounds through the speakerphone as usual and then back through the BT as soon as I connect the BT again?
I know the sounds went through the speaker after turning off the BT headset. I think I had to run the toggle app twice to get the sounds to go through the BT headset again (once to disable the old orphaned BT pairing, once to enable it with the new one). I'm not sure about that, though, and can't try it conveniently, as I just flashed a new ROM and didn't bother installing the toggle app since I didn't need it with the new stereo headphones.
Thanks. I'll give it a try and see what happens.
http://www.teksoftco.com/index.php?section=products&pid=7
It is free and it works.
Didn't work for me in trying to route TomTom speaker instructions through bluetooth to the car. :-(
bangbang023 said:
Thank you. I'm going to try that after work.
One thing, if I leave the toggle on, and then disconnect the BT, will it then play the sounds through the speakerphone as usual and then back through the BT as soon as I connect the BT again?
Click to expand...
Click to collapse
hopper13 said:
Didn't work for me in trying to route TomTom speaker instructions through bluetooth to the car. :-(
Click to expand...
Click to collapse
Dunno what to say. My initial motivation for trying it out was to route amAze GPS navigation instructions through my bluetooth headset, and it worked fine for that. Worked for TCPMP video sound, too. I don't know why TomTom would be different.
wmm said:
Dunno what to say. My initial motivation for trying it out was to route amAze GPS navigation instructions through my bluetooth headset, and it worked fine for that. Worked for TCPMP video sound, too. I don't know why TomTom would be different.
Click to expand...
Click to collapse
Maybe it's headset/handsfree profile difference?
Is there anything available that will force my HD2 to use the internal mic while a headset is plugged into the 3.5mm socket?
I often use my HD2 to listen to music in my car using a 3.5mm jack to jack cable into the aux in port just near my handbrake which works a charm.
When I get a call the music is interrupted and if I answer it I can hear the caller through my car speakers however they can't hear me as the phone is in headset mode and is expecting a mic to be plugged in.
I don't think it's a simple case of re-routing which mic is used as while that may technically work the caller would be able to hear themselves delayed through my cars sound system. I need the phone to send the mic into speaker mode so it has a detection system that stops the caller hearing themselves but send the output through the headset socket.
I hope that makes sense?
seems strange that it does not working .. i use this way to listen music & gps instructions and it is working ok, with the phone's microphone.. try i different 3.5mm jack (stereo) .. or you have a cooked rom ?
I just tried a different cable and it's working! strange for some reason the HD2 must have thought my cable was headset?
Thanks!
yeah it dosnt work cuz if u look @ the original headset it has 3 lines which meant 2 for the stereo ear pice and 1 for the mic, i have the same prob i dnt like the origenal headset so i use mine which means i have to unplug it every time i get a call, but i think the only way to use good headset with mic is to buy the iphone headset, its the same priciple with a better sound quality of the headset
If your jack has only 3 contacts, the phone can sense there's no 4th one, so there's no mic, and uses the internal mic. If your cable has 4 contacts, it will try to use external mic even if there's actually none.
oooo yeah u r right, lol, jst tried it it work
thnx man
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
i want my phone mic since my built in carstero mic is to far away
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
spyrale said:
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
Click to expand...
Click to collapse
yeah .. im experiencing the same problem as well. Its random . Therefore, i do not know if the HD2 supports the use of mic when we plug in out earphones. From what i tried, sometimes im able. Other times im not . i dont know whats wrong as well. Anyone here has a solution ???
no one knows or has any solution ??
elyl said:
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
Click to expand...
Click to collapse
if you want the voice on the car stero the ngo to the bluetooth settings moor or advance whatever and select play system sounds or something like that
Hello all
So this is the problem. since I have tab 7" I use a headet a lot. But the audio in my headset is full of bass. It's like someone speaking to me true inside a deeeeep hole. just a lot of bass. So I was trying all kind of equalizers but non of them work on BT output. So question to all of you is there a app like that.
I am running overcome ROM 4.0.0. I tried voodoo app (works great on headphones and speakers but not on BT headset. Havent really test BT headphones A2DP since my battery is dead and I just can't find my cable.) I tried a lot of EQ apps from market but non of tham have effect on BT. I also tried that DSP manager but it does not work at all. I can change settings as much as I want but nothing actually happens.
I remember that old phones without any smart OS could do that. They had in call equalizer. Funny that such a smart OS like android doesn't have something like that.
So please help. I there is no such app someone should make it.
Thank you all
Sounds like the extra booming bass is a characteristic of your BT headset as the Galaxy tab is not the source. The Tab has one of the best audio chips. Did you try with another BT headset? If you tell us which brand headset you use you may get more feedback...
Sent from my GT-P1000 using XDA App
It could be. Headphone is SE HBH-608 and headset is nokia BH-503 but this Nokia is not tested since I lost my charging cable. Can't find it. After I test it I will know for sure. But it could be that is because of headphone.
Oseloth said:
Hello all
So this is the problem. since I have tab 7" I use a headet a lot. But the audio in my headset is full of bass. It's like someone speaking to me true inside a deeeeep hole. just a lot of bass. So I was trying all kind of equalizers but non of them work on BT output. So question to all of you is there a app like that.
I am running overcome ROM 4.0.0. I tried voodoo app (works great on headphones and speakers but not on BT headset. Havent really test BT headphones A2DP since my battery is dead and I just can't find my cable.) I tried a lot of EQ apps from market but non of tham have effect on BT. I also tried that DSP manager but it does not work at all. I can change settings as much as I want but nothing actually happens.
I remember that old phones without any smart OS could do that. They had in call equalizer. Funny that such a smart OS like android doesn't have something like that.
So please help. I there is no such app someone should make it.
Thank you all
Click to expand...
Click to collapse
Try This:
https://market.android.com/details?...sImNvbS5zbWFydGFuZHJvaWRhcHBzLmVxdWFsaXplciJd
hi. thanks for suggestion. I tried that one and all other EQs. Non of them have effect on BT sound output. It does on a2dp BT output but that is only for listening to audio. Voice does not go via a2dp so it can't be modulated.
Oseloth said:
hi. thanks for suggestion. I tried that one and all other EQs. Non of them have effect on BT sound output. It does on a2dp BT output but that is only for listening to audio. Voice does not go via a2dp so it can't be modulated.
Click to expand...
Click to collapse
That's funny. I have used all EQ's with success through BT going to my BOSE Soundlink speakers.
No problem wit my BT platronics
Sent from my GT-P1000 using XDA App
volume+
try volume+ by meltus. it works bluetooth with my prius. it has bluetooth settings.
It was probably because of headphone. I tried headset and it is better but it also depends on other side and persons mic.
I think it is from the headset, because I had that problem earlier when I was using SE headset (I don't remember its model), but when I use SE MW600 the sound is so clear, btw if you have A2DP bt headset with 3.5 audio jack you can get different quality of sound if you only change the wired headset attached to it.
Sent from my GT-P1000 using XDA App
Here is my problem, I connect my phone to my car radio using a speaker cord connected to the headphone jack of the phone which works great. Problem is when I try to then make a call using my Q2 bluetooth headset. I can make the call, but it reverts back to the car speakers and not through the bluetooth device and the microphone on the bluetooth doesn't work either. It uses the samsung microphone.
Is this a setting issue, or do I need to unplug the speaker cord from the headphone jack every time I try to make a call?
Just found another similar thread. Still no answers?
ULEWZ said:
Here is my problem, I connect my phone to my car radio using a speaker cord connected to the headphone jack of the phone which works great. Problem is when I try to then make a call using my Q2 bluetooth headset. I can make the call, but it reverts back to the car speakers and not through the bluetooth device and the microphone on the bluetooth doesn't work either. It uses the samsung microphone.
Is this a setting issue, or do I need to unplug the speaker cord from the headphone jack every time I try to make a call?
Just found another similar thread. Still no answers?
Click to expand...
Click to collapse
I too would like to know if there is a way to make it work. so far the only thing that works is unplugging the cable to talk on bluetooth. which is kinda defeats the purpose of hands free. I am rooted and still can't find a solution. if you find any hack please post it here!
one other way is to buy a BT receiver that has audio and phone, but i kinda want to keep my integrated one.
arkady2k said:
I too would like to know if there is a way to make it work. so far the only thing that works is unplugging the cable to talk on bluetooth. which is kinda defeats the purpose of hands free. I am rooted and still can't find a solution. if you find any hack please post it here!
one other way is to buy a BT receiver that has audio and phone, but i kinda want to keep my integrated one.
Click to expand...
Click to collapse
Found it today. I was reviewing a post and poster (cant remember who!) mentioned he had a defective headset and used SoundAbout from the playstore to fix it. That got me curious, so I opened the app description and found that it would help with our problem. I downloaded the free version then the paid version $2.99 and it works. I am so happy you can not imagine. care the settings that worked for me:
Headset Plug in/out, checked.
Headset microphone, checked.
Notification Audio, checked.
Media audio, wired headphones
Bluetooth behavior, Bluetooth disconnected, checked
Bluetooth Auto Enable, checked
Phone call audio, Wired Headphones (but keeps reverting back to "Let Phone Decide" for some reason!)
I will email the developer and see if he has a solution and post back, but this is not a show stopper by any means.
Buy the paid version and enjoy the SG3 the way it should have worked out of the box.
ULEWZ said:
Found it today. I was reviewing a post and poster (cant remember who!) mentioned he had a defective headset and used SoundAbout from the playstore to fix it. That got me curious, so I opened the app description and found that it would help with our problem. I downloaded the free version then the paid version $2.99 and it works. I am so happy you can not imagine. care the settings that worked for me:
Headset Plug in/out, checked.
Headset microphone, checked.
Notification Audio, checked.
Media audio, wired headphones
Bluetooth behavior, Bluetooth disconnected, checked
Bluetooth Auto Enable, checked
Phone call audio, Wired Headphones (but keeps reverting back to "Let Phone Decide" for some reason!)
I will email the developer and see if he has a solution and post back, but this is not a show stopper by any means.
Buy the paid version and enjoy the SG3 the way it should have worked out of the box.
Click to expand...
Click to collapse
Checking out this app shortly. Did you have to update tot he paid version to solve the issue?
Buy the audio out from micro usb cables and it fixes it.
Sent from my SCH-I535 using xda premium