Hey guys my phone (moto g 2nd gen) volume down button has been in a constant state of being press im guessing its a hardware issue. Anyway me being the idiot I am didn't know this was the case so when I powered off my phone and tried to turn it back on went to the fast or hard boot menu. since it is constantly being pressed I cant even navigate the menu with the select feature (volume up) because the volume down key Is being pressed can I get some help with this or atleast some knowledge onto how to make the volume down key not respond? Or how to skip the fastboot or disable it? I would really appreciate it if you could help me out
Roxenergy said:
Hey guys my phone (moto g 2nd gen) volume down button has been in a constant state of being press im guessing its a hardware issue. Anyway me being the idiot I am didn't know this was the case so when I powered off my phone and tried to turn it back on went to the fast or hard boot menu. since it is constantly being pressed I cant even navigate the menu with the select feature (volume up) because the volume down key Is being pressed can I get some help with this or atleast some knowledge onto how to make the volume down key not respond? Or how to skip the fastboot or disable it? I would really appreciate it if you could help me out
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the Moto G at http://forum.xda-developers.com/moto-g . I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/moto-g/help where the experts familiar with your device will be best able to guide you.
Good Luck!
Related
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English
I have a rooted LG G2 (AT&T) running Android 4.2.2. I rooted it and then tried to install TWRP recovery. After attempting to flash a TWRP image using Flashify, the phone rebooted showing the Android guy with a red triangle (so basically the installation failed). I held down the power button and the phone booted up like normal.
Alright, now later down the line the phone received an OTA update (probably Kitkat). When the phone "booted", the LG logo flashed on the screen and then stayed black (the backlight was still on). If I hold the power button+volume down, the phone will just reboot. Without really being able power down the device, it seems I cannot get into download mode. Also, if I hold down power button+volume down for a long time, the notification LED will blink red (5 times *stop* 5 times...) until I let go.
Eventually I tried the power button+volume down button multiple times, pressing it in different timing intervals and managed to get it into factory reset mode! I followed the prompts but alas the phone will still not boot normally and the screen backlight is still on.
I hope this is the right forum, I need help fast.
You may wish to post your request in G2 Q&A, Help & Troubleshooting
Perseus71 said:
You may wish to post your request in G2 Q&A, Help & Troubleshooting
Click to expand...
Click to collapse
So just copy paste this in a that forum then delete this one?
SkylerWallace said:
So just copy paste this in a that forum then delete this one?
Click to expand...
Click to collapse
Essentially, yes. This isn't a tech support forum. It's simply to help you find what you're looking for or find where to look for further information. Copy and paste your question in there. No need to have this one deleted though.
anyone out there can help....... i have tried holding home button and volume up button and releasin the power button, keeping hold of the home button and volume up for more than 10mins ,i still can get into recovery mode HELP|||||:crying:
Hi,
You've already asked this in the thread I would have linked you to.
So you're good. Just need patience now. ?
And kudos for searching and finding the best place to ask for help. ?
Good luck!
Thank you. Thread closed.
So I tried to get stock Android back to my phone (I had cyanogenmod) and when following the instructions of a guide I found, they said there was a possibility of getting into a boot loop, which indeed happened. To solve this I had to go into Recovery Mode and the logo of DEAD ANDROID would appear, and so it did. The problem comes when I push the power button and both volume buttons to get into the menu of recovery mode. It doesn't come up, the phone just shuts down.
I don't know how to solve this or if it even has a solution... could someone please help me
Ps: yes, I'm a complete noob :good:
Hi, thank you for using XDA Assist. To get into recovery when you see the dead Android press and hold the power button and then press and release the vol down button. It can be a little tricky, especially the timing of the press and release of the vol down button.
Thread closed.
Hey guys, to explain my situation briefly and simplistically.
My phone has the vol - button broken ( permanently stuck) I remapped the buttons so it wouldn't keep lowering the volume on my phone, but it keeps booting into the bootloader and spams ( volume down pressed) until I connect my phone to my computer and open up console and write : fastboot continue
This hasn't been a major issue as of yet, but next month I will be travel abroad and I really need it to be able to boot up without a computer.
Now is there any possible solution to remap/ disable
The bootloaders key buttons to avoid the hassle? :/
I really appreciate any sort of response, thank you.
P.S I am running Android marshmallow
Hi,
Thanks for using XDA assist.
Please tell us what device you have so we can give appropriate directions.
gsstudios