So i love my Xperia SP and i decided to root my phone because warranty was busted. So i rooted it and changed bootanimation but unfortunatly i did not expect it to be too small and it just stayed on bootanimation but if i press buttons or touch the screen it makes vibrations and sounds etc... but the bootanimation is still there. I copyed all my files via usb (which worked fine) and made the hard reset via the android device ,emptyer or that thing if you lost your device then you hard reset it via google account setting in computer but it still wont work, still the bootanimation is there but phone works.
Please help me!
Hi,
Thanks for using XDA Assist Kindly post here Xperia SP Q&A, Help & Troubleshooting were experts using your device will be able to help you better. kindly use the same link for future queries.
Good Luck!
Related
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
My device is C6903 (14.4.a.0.108) bought from the Philippines. It's already rooted and has an unlocked bootloader.
The problem is when I installed this kernel http://forum.xda-developers.com/showthread.php?t=2699803 it now wouldn't boot it just shows the Sony logo and after 2 minutes or so it just blacked out. but when i tap the screen on a dark room the screen shows the black background without the sony logo and after a moment it darkened again like its in lock screen (Its really hard to describe).
I flashed it using fastboot. with this command
/ fastboot flash boot boot.img / and after I input this command
/ fastboot reboot /.
Its still charging and it shows the battery icon when charging on an off state. It can still be recognized by fastboot when i connected it to the computer.
Ive already hard reset it using the button on the sim card slot and the other method the power button and the volume up. It didn't really helped. help me guys Im new in this flashing methods. What should I do?
Hi,
Did you read the requirements at the beginning of post number 1? Did you meet those requirements? The best place to ask about this is in the kernel thread you linked in your post. If that doesn't help you, you can ask for help here....
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting
Any future questions can be asked in the above section also.
Good luck!
Darth said:
Hi,
Did you read the requirements at the beginning of post number 1? Did you meet those requirements? The best place to ask about this is in the kernel thread you linked in your post. If that doesn't help you, you can ask for help here....
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting
Any future questions can be asked in the above section also.
Good luck!
Click to expand...
Click to collapse
thanks for replying. I have managed to get out of the situation but now I'm facing another one. My phone is now on boot loop. I tried using flashtool but it wouldn't work. While on flashboot doing its job, my phone would just boot up and go again on a boot loop. flashtool log would just say device disconnected.
I think I found a way to do another trick using fastboot but I don't have a custom recovery installed. Is there any way that I can install CWM or any tools like it using only fastboot? I've been looking for it the whole time but I can't find one. I'm new to this thing by the way. Thanks again!
I've found one. http://wiki.cyanogenmod.org/w/Template:Recovery_install_fastboot
Can i flash this Z1-lockeddualrecovery2.7.154-BETA.flashable.zip (if its possible ) instead of the .img that was mentioned on the site. I can't find a recovery.img for my device.
Again, please ask in your device section linked above.
Thanks!
Thank you. Thread closed.
Hi there.
I updated my phone the other day and it ended up doing reboots with an error message regarding the update process. Before I hand it in for service, I wanted to make a copy of all the contents of the device..
So far, it looks like using some recovery kernel image and ramdisk is the right way to go, using "fastboot boot". What's a good image to use?
It's important that nothing is changed on the phone so I for example void the warranty.
Thanks,
Morten
Hi,
Thanks for writing to us at XDA Assist. I can't find anything related to your question on XDA, please ask here:
Xperia Z2 Q&A, Help & Troubleshooting
Good luck.
Guys
I just bought a sophone i6 plus with an mtk6582
I tried flashing gapss on it via zit flasher and now it is stuck in bootloop
I tried factory resetting it from the recovery....still stuck
Now the problem is that i cant get it to work with sp flash tool.....maybe it is bcoz the debugging is disabled bcoz i just factory reset the phone
Every time i connect the turned off phone to sp flash tool....instead of flashing ....the phone just starts to charge and nothing happens
I tried all maximum usb drivers......i dont wnow how to open bootloader......its not working with adb either.......so basically its just stuck in bootloop only.
Pl help
Thabks
Hi,
Thanks for using XDA assist.
Unfortunately, I couldn't find any information about your problem on your device. However, I would recommend posting in the Android Q&A, Help & Troubleshooting forum as there is no dedicated forum for your device.
Good Luck! - gsstudios
Hi, I was about to install myself a new rom and I probably badly cocked up.
well to make it short, I was following instructions here https://wiki.cyanogenmod.org/w/Install_CM_for_honami
and it went good, till I misunderstood one thing, that i need to get phone in fastboot and then navigate in PC cmd to boot.img, well I did, but I was so stupid (I realized moment later) that I had separated the boot.img file from rest of the stuff in cyanogenmod folder. And I booted it wia fastboob and rebooted my phone....
well... red light started and that was it...I have been waiting some time if something will happen but nothing.
then tried to start it, reset it, nothing helped...all the phone does is only the red led will start if I hold power and vol + and if I hold power and vol +- it vibrates once, and after moment it vibrates three times.
my phone is xperia Z1 as you can see from cyanogenmod wiki page -honami
so my question is simple... is there any way to fix this?
Iam rly disapointed it can be broken so easily just by one tim booting wrong file? I dont believe there is no way how to save it... but my PC doesnt recognize the device anymore so I cant fix it or dont know how...
pls help
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
Xperia Z1 Q&A, Help & Troubleshooting
The experts in your device Q&A forum should be able to help you.
Kind regards
Trafalgar Square
XDA Assist