With the recent release of framework 71 released here: http://forum.xda-developers.com/showthread.php?t=3034811 xposed framework can now be installed on the idol 3 without causing boot loops. Xposed for Lollipop is still in alpha so you may find that some modules still don't work but the handful I tried including gravitybox for lollipop worked fine. Xposed also has a module to fix a memory leak in 5.0.x roms which I highly recommend running. Make sure you install the arm64 framework along with the apk....if you run into issues you can flash the uninstaller via recovery and it will remove the framework.
There are many modules available now to customize the stock rom.
Thanks for your information.
I am so excited to try it.
I would like to confirm, do I just need to root my phone and then install xposed? If I failed, is it only way to flash uninstaller via TWRP recovery?
zerog2 said:
Thanks for your information.
I am so excited to try it.
I would like to confirm, do I just need to root my phone and then install xposed? If I failed, is it only way to flash uninstaller via TWRP recovery?
Click to expand...
Click to collapse
Well Xposed requires root so yes you will have to be rooted...if the xposed framework fails to boot you can run the xposed uninstaller. You will need to inquire in the xposed for lollipop thread I linked to for more details and directions.
All I did however was flash the xposed amd64 framework 71 zip file (from TWRP and then rebooted into the ROM) and then installed the xposed-installer 3.0 alpha apk....then I went into the framework section in the apk and it showed the framework was installed and working...I've since loaded a handful of modules: (App Settings, BootManager, Fix Lollipop Memory Leak, GoogleOfflineVoice, Gravitybox [LP], Network Speed Indicator, Notifyclean, Rootcloak (can be used to hide root from the system update checker so you can check for updates as normal however don't DOWNLOAD them till you've fully unrooted), Secure Settings Xposed Module, Statusbar download progress, StopSwitchDelay, XInstaller, XInternalSD and XVoice+) all of which seem to be operating normally.
YouTube adaway works for me
If anyone finds a way to add reboot to bootloader and recovery to the power down menu I'd like to hear about it. All the modules I've tried (APM, gravitybox etc) have failed.
If anyone finds a way to add reboot to bootloader and recovery to the power down menu I'd like to hear about it. All the modules I've tried (APM, gravitybox etc) have failed.
Click to expand...
Click to collapse
I've just been using QuickBoot for now. I'll check out Xposed shortly, just installing it now.
Link: https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en
purple.epod said:
I've just been using QuickBoot for now. I'll check out Xposed shortly, just installing it now.
Link: https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot&hl=en
Click to expand...
Click to collapse
I've been using the app "RebootManager"....I've used QuickBoot in the past but was hoping to find either a way to enable it in settings or a way to enable it in xposed but don't seem to be able to replace or add to the "power down" menu in the idol. Annoying. I also remember there being a module to make the kindle app act more like an ebook reader but it must not be compatible with Lollipop since I don't see it in the module list.
famewolf said:
I've been using the app "RebootManager"....I've used QuickBoot in the past but was hoping to find either a way to enable it in settings or a way to enable it in xposed but don't seem to be able to replace or add to the "power down" menu in the idol. Annoying. I also remember there being a module to make the kindle app act more like an ebook reader but it must not be compatible with Lollipop since I don't see it in the module list.
Click to expand...
Click to collapse
EDIT: Nevermind, was for Samsung devices only.
Thanks for the news on Xposed. Will definitely have to install it later.
I've been using the app "RebootManager"....I've used QuickBoot in the past but was hoping to find either a way to enable it in settings or a way to enable it in xposed but don't seem to be able to replace or add to the "power down" menu in the idol. Annoying. I also remember there being a module to make the kindle app act more like an ebook reader but it must not be compatible with Lollipop since I don't see it in the module list
Click to expand...
Click to collapse
.
Yeah, I tried some of the Xposed modules that are supposed to do that... None of them work, I expect because Alcatel has 'skinned' the reboot dialog. It certainly doesn't look like the stock Android one.
does the XPrivacy module work?
you might try toggles
famewolf said:
If anyone finds a way to add reboot to bootloader and recovery to the power down menu I'd like to hear about it. All the modules I've tried (APM, gravitybox etc) have failed.
Click to expand...
Click to collapse
i use a app called "Power Toggles" toggles can be added to taskbar, widget and lock screen. most toggles do not need root but some do. there is a toggle i use that gives shut down options when clicked. the options are as follows, ( power off , restart , recovery mode , bootloader. ) this app works sweet as i have the toggles to pull down from taskbar on any page, you can also create your own shortcuts as a toggle. i have been using this app on several devices for 3 years. does not need xposed. Note this does not add these options to your power button.
finally! so happy to have xposed running on this. gravity box is a must. mix it with xposed gel settings (to hide app dock) and use custom key from gravity. i can finally hide my annoying bluetooth icon, apps, and clock "am/pm" too.
one funny thing to note. the default launcher allows double-tap on homescreen to sleep the device but it doesnt work on the lockscreen. gravity box has the option to allow doubletap on lockscreen to sleep. but since i switched to GNL it seems double tap to sleep on homescreen doesnt work no more.
kirplunk said:
i use a app called "Power Toggles" toggles can be added to taskbar, widget and lock screen. most toggles do not need root but some do. there is a toggle i use that gives shut down options when clicked. the options are as follows, ( power off , restart , recovery mode , bootloader. ) this app works sweet as i have the toggles to pull down from taskbar on any page, you can also create your own shortcuts as a toggle. i have been using this app on several devices for 3 years. does not need xposed. Note this does not add these options to your power button.
Click to expand...
Click to collapse
Thanks for the reply. I use an app called Hangar that puts the 7 most "popular" icons you use at the bottom of the notification list or you can optionally pin a specific icon....so I have pinned the rebootmanager icon there...I also considered using an xposed module to define holding down power button to call rebootmanager directly but don't think it's a good idea to override a main button like that...anyway Hangar counts the time you spend in each app to determine which icons to show..has ended up working quite well. Hangar has an xda thread in android apps & games and you can add a 2nd row of icons should you wish to.
thatguy52 said:
finally! so happy to have xposed running on this. gravity box is a must. mix it with xposed gel settings (to hide app dock) and use custom key from gravity. i can finally hide my annoying bluetooth icon, apps, and clock "am/pm" too.
one funny thing to note. the default launcher allows double-tap on homescreen to sleep the device but it doesnt work on the lockscreen. gravity box has the option to allow doubletap on lockscreen to sleep. but since i switched to GNL it seems double tap to sleep on homescreen doesnt work no more.
Click to expand...
Click to collapse
Install an app called "screen off" and then assign that app to be called for a double tap in your launcher (or at least that's what I did in nova launcher) and it works fine....still more accurate then the double tap to wake.
@thatguy52 you have xposed gel settings working? I try it, but nothing work for me, have a message that gel launcher not installed
Envoyé de mon 6045Y en utilisant Tapatalk
famewolf said:
Install an app called "screen off" and then assign that app to be called for a double tap in your launcher (or at least that's what I did in nova launcher) and it works fine....still more accurate then the double tap to wake.
Click to expand...
Click to collapse
thanks will try that.
wallah said:
@thatguy52 you have xposed gel settings working? I try it, but nothing work for me, have a message that gel launcher not installed
Envoyé de mon 6045Y en utilisant Tapatalk
Click to expand...
Click to collapse
yeah got that message too I think all I did was dl Google now launched and restart the module.
And all settings work with the Alcatel launcher? That is good news, thanks bro
Edit : just tried like you said, installed gel launcher, but still don't work. Thank you anyway
Envoyé de mon 6045Y en utilisant Tapatalk
Thanks a lot
I've received my Idol 3 today.
I booted to twrp (without installing it) and could root it and install xposed.
GravityBox works fine as weel as Network Speed Indicator.
Ixox said:
Thanks a lot
I've received my Idol 3 today.
I booted to twrp (without installing it) and could root it and install xposed.
GravityBox works fine as weel as Network Speed Indicator.
Click to expand...
Click to collapse
If you are going to root why not go ahead and flash TWRP so you can enjoy all of it's benefits? Root access with filemanager, adb access etc?
The default recovery does not have reboot to bootloader for 2 models of the 6045.
famewolf said:
If you are going to root why not go ahead and flash TWRP so you can enjoy all of it's benefits? Root access with filemanager, adb access etc?
The default recovery does not have reboot to bootloader for 2 models of the 6045.
Click to expand...
Click to collapse
I have a 6045Y bought in France. Don't know about the reboot to booloader from recovery.
I only needed root for xposed, link2sd, root explorer and titanium backup.
Didn't really need to have TWRP flashed.
I had in mind, that could be easier to unroot and get OTA update if i don't flash TWRP. That's maybe wrong thought.. (?).
Related
I am after 2 in particular, not sure if they exist for the ROM. I would like the Advanced Boot Menu, very handy. I have the flash file, but is it good for CM11? I am also after a centre clock for the status bar, something simple yet can't find it.
TotalMusic said:
I am after 2 in particular, not sure if they exist for the ROM. I would like the Advanced Boot Menu, very handy. I have the flash file, but is it good for CM11? I am also after a centre clock for the status bar, something simple yet can't find it.
Click to expand...
Click to collapse
these 2 are available in almost all the existing CM roms
Advanced reboot menu can be enabled from dev settings too.
Or can be enabled using exposed.
Ajaykumar21066 said:
these 2 are available in almost all the existing CM roms
Advanced reboot menu can be enabled from dev settings too.
Or can be enabled using exposed.
Click to expand...
Click to collapse
Thank you. Found the Reboot Menu, how can I go about the Centre Clock?
You can do it by exposed too
Gravity box or xblast or xui mod
Sent from my Nexus 5 using Tapatalk
Ajaykumar21066 said:
You can do it by exposed too
Gravity box or xblast or xui mod
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks, now complete.
Ajaykumar21066 said:
these 2 are available in almost all the existing CM roms
Advanced reboot menu can be enabled from dev settings too.
Or can be enabled using exposed.
Click to expand...
Click to collapse
As for power menu, I activated the reboot menu on dev settings but there's no option as for reboot in recovery and other stuff. Has not been implemented yet?
Klaus88 said:
As for power menu, I activated the reboot menu on dev settings but there's no option as for reboot in recovery and other stuff. Has not been implemented yet?
Click to expand...
Click to collapse
what are the options that you see when you press the power button
Ajaykumar21066 said:
what are the options that you see when you press the power button
Click to expand...
Click to collapse
Switch off - Reboot - Profile - Screen capture/snapshot - Airplane mode - sound switch ... this is ok, the "problem" is the lack of submenu in reboot
You don't need CM11 to do any of this. It's all in xposed either gravity box or xblast tools.
Hi. I need some help. I would like to add launcher rotation to galaxy s5 stock launcher (g900f). Currently I am running Phoenix Rom ( Great rom, by the way). I have tried lots of modded touchwiz launchers but none of them has that feature. Please help.
You need to be root. If you r not root then try rooting your device. Search it on Google. I have tried this method in my phone and it worked so i am telling to you. I dont take responsibility for any damages you cause to your own phone. Keep the backup of the stock ROM if you screw the things up. Use a cwm or twrp recovery to backup . If you do not have it try searching it on google.
1) Navigate to the folder "/data/"
Press Menu, New, File, then name it "local.prop" (without the double quotes).
2) Add the following line to it in the editor...
Code:
launcher.force_enable_rotation=true
Sent from my Micromax A350 using XDA mobile app
Method 2
Root mandatory
Install xposed framework follow this guide
http://gs5.wonderhowto.com/how-to/install-xposed-framework-your-samsung-galaxy-s5-0155684/
After installing it open modules. Search Xposed GEL settings.
Download and install it
Enable the module ( you can find it in modules check the box )
Reboot
Open Xposed GEL settings
In menu click general
Turn on auto rotate
See the screen shot
Full reboot ( Just turn off and turn on your device)
Sent from my Micromax A350 using XDA mobile app
Thanks for quick response, but I need rotation for touchwiz launcher
Can you please explain what exactly this means ? Im not sure i understand what the behavior will be if i enable launcher rotation? Whats the difference from just enabling rotation in the normal way?
It means home screen rotation
Hello! I have managed to get Xposed Framework working 100% on my rooted Kindle Fire HD 8 2016. My apologies if I posted in the wrong forum or incorrectly titled this thread as I am new here.
The following method I used is as follows.
1. Downloaded the Xposed Framework installer located at:
https://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
2. Get some sort of File Explorer app. I personally recommend ES File Explorer.
2. Install APK normally with either browser or file manager app (ex: ES File Explorer)
3. Open app and go to official tab.
4. You should see something that looks like xposed-v87-sdk22-arm, next to it there should be a little downward facing arrow.
Click on it.
5. Select xposed-v87-sdk22-arm64 from the dropdown menu.
6. Click on Install or Install/Update
7. By now you should see a little console window popped up displaying that there was an error finding "app_process64". This is normal.
8. Go to home screen and open your File Explorer app.
9. Navagate to /system/bin/ and delete the file: "app_process64_xposed"
10. Reboot your tablet ("Optimizing System blah blah blah" is normal when booting.)
11. Open the Xposed installer app we downloaded earlier
12. If you see a green box with a checkmark in the middle it worked!
13. Go give coltxL2717 a big ol' thanks over on his post at:
https://forum.xda-developers.com/showpost.php?p=70607706&postcount=4
He's the real MVP!
what kind of xposed tweak would you recommend for this tablet?
What modules are you using?
Sent from my KFGIWI using Tapatalk
vandyman said:
What modules are you using?
Click to expand...
Click to collapse
I am using AdBlocker reborn, Xstana (can only change nav bar), YouTube AdAway and YouTube Background Playback.
Most mods do not work, but I've only tried a very few out of all the options they have.
tkdfriend said:
Hello! I have managed to get Xposed Framework working 100% on my rooted Kindle Fire HD 8 2016.
Click to expand...
Click to collapse
Thank you for this! Rooted. Installed the framework which was needed first and have now installed Xprivacy module. Important to control what applications can and cannot access (location, network, identity, accounts, etc.)
Has anyone tried this on the older model?
What module is working to modify the home button to launch a new launcher app instead of returning to the Fire OS home screen?
@coopmaster Confirmed also working with HD 8 (5th Generation), buy using arm only; not the x64 or x86 and no further deletion is needed.
ttcontributor said:
@coopmaster Confirmed also working with HD 8 (5th Generation), buy using arm only; not the x64 or x86 and no further deletion is needed.
Click to expand...
Click to collapse
so i should be fine if i use just arm ? just making sure before i start this.
coopmaster said:
so i should be fine if i use just arm ? just making sure before i start this.
Click to expand...
Click to collapse
Yes, exactly fine. But make sure not to test every Xposed module cz it might soft brick your Fire !
I recommend 'GravityBox [LP]' as it has pretty extensive features.
ttcontributor said:
Yes, exactly fine. But make sure not to test every Xposed module cz it might soft brick your Fire !
I recommend 'GravityBox [LP]' as it has pretty extensive features.
Click to expand...
Click to collapse
:crying: Already hard bricked my first Fire 6 :crying: Luckily Amazon was a good sport and sent me a new one. Yes! I've learned very quickly to make sure everything is completely stable before attempting anything on these devices as they are VERY touchy! :good:
ttcontributor said:
Yes, exactly fine. But make sure not to test every Xposed module cz it might soft brick your Fire !
I recommend 'GravityBox [LP]' as it has pretty extensive features.
Click to expand...
Click to collapse
GravityBox says it's for vanilla ROMS. Does it work on the Fire?
JAS_21 said:
GravityBox says it's for vanilla ROMS. Does it work on the Fire?
Click to expand...
Click to collapse
Get the [LP] Lollipop version.
I got it working by choosing soft reboot from the xposed installer menu
If someone could help me with a module to change nova launcher prime that'd be great!
"app_process 64 xposed cannot be deleted"
Using ES
Update: Woops, forgot to enable Root Explorer.
Hey, I am stuck at the step where I have to choose the framework. I only have xposed-v89-sdk22-arm64. How do I get v87?
I read that v89 works and used it.
v89 downloads then when the popup to install appears, the app freezes and i'm booted back to the desktop...
i broke it
So, i'm pretty sure i messed up the process, i selected the wrong option from the drop down and it gave me an error. Once i restarted the Fire 10, it's now stuck in bootloop. (fire logo). I tried logging in to the recovery (vol Down+power) but it doesn't let me and restarts.
The tablet was rooted, and had google apps installed.
Any suggestions to get it back?
marksee said:
So, i'm pretty sure i messed up the process, i selected the wrong option from the drop down and it gave me an error. Once i restarted the Fire 10, it's now stuck in bootloop. (fire logo). I tried logging in to the recovery (vol Down+power) but it doesn't let me and restarts.
The tablet was rooted, and had google apps installed.
Any suggestions to get it back?
Click to expand...
Click to collapse
Ugg, same thing happened to me. I followed all the directions after rooting. Stuck at "Fire" logo as well.
Had to boot into recovery and flash stock image (5.6.1.0) to get working again......
UPDATE - 2nd time around all went well. First time I couldn't delete the file using ES, so I just figured I'd reboot first.... Bad idea. Make sure you delete the file first (Enable Root Explorer in ES if it says it can't be deleted)
Enough said really. If you don't know about GravityBox module, you can use it to perform a good amount customization on menus, button actions, lock screen, etc. For example, 30 volume step mod, circle battery with percentage, randomization of pin numbers on lockscreen, extended power menu with reboot options/screenshot/screen recording, etc.
Grab the regular (NOT the non FBE version).
It can be found here: https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
If you don't have Xposed systemless installed, download and install the sdk25 version (download zip and add module from magisk manager) from here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
As always, Xposed systemless framework enabled will cause SafetyNet to fail. So if you want to use Snapchat, Android Pay, Pokemon GO, Mario GO, new versions of Netflix, etc.; you'll have to disable the framework and then reboot currently. This hasn't been an issue for me so far!
Have you had any luck with any Magisk's modules? I can't get them to work. I can't get any black out apps to work via TRWP flashing either. It's gotta have sitting to do with the a/b partition, right?
Sent from my PH-1 using Tapatalk
Cool
Airwolf79 said:
Have you had any luck with any Magisk's modules? I can't get them to work. I can't get any black out apps to work via TRWP flashing either. It's gotta have sitting to do with the a/b partition, right?
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
The Xposed framework systemless v88.2 is the only module I actually have in magisk. Most magisk modules don't seem to have been updated for the magisk systemless 14+ betas.
Ok, after a couple of reboots, I got a few of them to work. BusyBox, Greenify, and the black themed injected YouTube back ground playback (which is amazing BTW) are all working now. Although, my phone doesn't pass safetynet now.
Does status bar colouring work on GravityBox on the Essential? I ask because colouring the status bar black across all system and apps would basically give an illusion of equal top and bottom bezels but with light up notifications and icons which imo would look pretty cool and hide the camera notch.
manaox2 said:
Enough said really. If you don't know about GravityBox module, you can use it to perform a good amount customization on menus, button actions, lock screen, etc. For example, 30 volume step mod, circle battery with percentage, randomization of pin numbers on lockscreen, extended power menu with reboot options/screenshot/screen recording, etc.
Grab the regular (NOT the non FBE version).
It can be found here: https://forum.xda-developers.com/xposed/modules/app-gravitybox-v7-0-0-tweak-box-android-t3653953
If you don't have Xposed systemless installed, download and install the sdk25 version (download zip and add module from magisk manager) from here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
As always, Xposed systemless framework enabled will cause SafetyNet to fail. So if you want to use Snapchat, Android Pay, Pokemon GO, Mario GO, new versions of Netflix, etc.; you'll have to disable the framework and then reboot currently. This hasn't been an issue for me so far!
Click to expand...
Click to collapse
I installed the regular gravity box and it's just an apk. How do I get the gravity box module? Is there a difference? If so could u give steps? And thanks Xposed is installed and in the magisk manager folder. I just can't figure out how to install gravity box
treIII said:
I installed the regular gravity box and it's just an apk. How do I get the gravity box module? Is there a difference? If so could u give steps? And thanks Xposed is installed and in the magisk manager folder. I just can't figure out how to install gravity box
Click to expand...
Click to collapse
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
manaox2 said:
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
Click to expand...
Click to collapse
I got it. Been a while. Thanks
---------- Post added at 01:52 AM ---------- Previous post was at 01:23 AM ----------
manaox2 said:
You need to install the xposed framework apk as well located in the attachments of the xposed systemless thread in order to enable and manage xposed modules. Found here: https://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268 and called XposedInstaller_3.1.4_Magisk.apk
Click to expand...
Click to collapse
I have a question for ya. Do u know where to find the recent app settings in gravity box. I can't find them. I want to switch to bottom right. It's been so long since I've used it and it's changed. Thanks
This is great, thanks for the headsup. Being able to use GB+xp makes running stock an awesome experience AND I get to use the 360 cam.
The cam is really the catz azz .
don't use AP as my cc app works regardless.
Zo0
On b3 and looking for a stable magisk that won't break my wifi .. so many headaches trying to get magisk to work on essential ..want Xposed again
I have no issues with Wifi, using Magisk 15.3, installed following the root guide.
Can gravitybox unlink system volume and ringtone volume in oreo? Thanks.
How do I add it in magisk? When I click the plus I can select the zip but?
Just looking for a good theme where i can change the status bar and change clock settings and mobile data settings if on status bar etc
Any suggestions?
Cheers
avid_droid said:
Use substratum.
There is kclock for clock and fonts
There is gravija and dark material OOS for signal Icons
These are substratum modules
Click to expand...
Click to collapse
Thanks
Does it work on Android 10?
Take it that download substratum from play store and then download themes and install them via substratum app?
avid_droid said:
Yes. Must be rooted
Click to expand...
Click to collapse
Yes rooted
Looking at play store now for some
funkyirishman said:
Yes rooted
Looking at play store now for some
Click to expand...
Click to collapse
Also, pretty sure you should use Substratum Lite with Android 10. I was having a few issues with the original Substratum on 10
avid_droid said:
Substratum works perfectly fine. App has been updated for 10 for a while now
Click to expand...
Click to collapse
So Substratum from the play store works on android 10 don't need lite or beta app?
So what's best theme to add date in status bar and show data connections
Mentioned in first reply some these on the play store?
Any themes that can add the date in the status bar?
did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work
funkyirishman said:
Any themes that can add the date in the status bar?
Click to expand...
Click to collapse
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
ayhanaykut said:
did not work,substratum never works
---------- Post added at 09:51 AM ---------- Previous post was at 09:49 AM ----------
if you like themes install miui rom and enjoy,only auto rotate and fingerprint do not work
Click to expand...
Click to collapse
I've been using substratum for a while now and it always works. You must be doing something wrong to get it working.
GeekMcLeod said:
K-Klock. I use xXx no limits magisk rom that has an option to install it. Works great for centering, adding date, changing font. Bunch of stuff you can do with it. You do need to open the app first and configure your settings, build the apk within K Manager then open substratum and install.
If you are not aware, I always get the best results by building and installing, reboot, then enable.
Click to expand...
Click to collapse
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?
funkyirishman said:
Thanks
Are you talking about the below
https://play.google.com/store/apps/details?id=kpchuck.k_klock
I have xxxnolimits installed but can't find any module in magisk or am I looking in the wrong place?
Click to expand...
Click to collapse
Looks right. I just had it installed with the xXx-nolimits profile.
Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.
mookiexl said:
Xposed and gravitybox is all you need and is the most reliable, fool proof method to get what you are requesting for clock, date, clock format, and clock locations. Plus I'm sure you will find other options useful as well. I use it for the clock, lock screen shortcuts, and to remove that god awe full blur that OP implemented on Android 10's lock screen music background art.
Click to expand...
Click to collapse
Where can I get these
Tried themes using substratum but no good
funkyirishman said:
Where can I get these
Tried themes using substratum but no good
Click to expand...
Click to collapse
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?
GeekMcLeod said:
GravityBox
This is the version of EdXposed I use without issues.
Just curious, but what was wrong with K-klock?
Click to expand...
Click to collapse
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?
funkyirishman said:
Thanks will have a look at Gravity box. Is it beta version that works?
What exactly does Ed posed do and do I flash them via Magisk.
Tried Kclock and loaded it up via substratum. Then tried simple thing like put clock in status bar in the middle and no joy. Also no option to have date on status bar. Unless I'm missing something?
Click to expand...
Click to collapse
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
TaiChi Xposed is also an option and actually better in my opinion because you can activate and deactivate modules on the fly.
GeekMcLeod said:
EdXposed is the xposed framework for Android 10 (maybe earlier too) it is installable through magisk. Which is kinda like magisk, you can download and use different modules. Use the 4.5.5 version I linked.
GravityBox is a module for EdXposed. Install it through EdXposed Manager. Only working version for A10 is the one I link. Beta 10.0.5.
So you have to go into K-Manager first before substratum. Select all your desired options, then hit the bottom right floating button. Now you have to go to substratum and install it.
Click to expand...
Click to collapse
These are the files that I have
GravityBox_Q_10.0.0-beta-5.apk
magisk-EdXposed-YAHFA-v0.4.6.0_beta.4471.-release.zip
magisk-riru-core-v19.5.zip
EdXposedManager-org.meowcat.edxposed.manager-4.5.2-452-release.apk
These are the right files to install as per the below.
Zip files installed via Magisk but don't reboot after each one
Installation
This procedure assumes you have working Magisk installation.
1) Install Riru and EdXposed modules using Magisk Manager
2) Install EdXposed Manager app
3) Reboot and open EdXposed Manager app to check if EdXposed works and is active
4) Install GravityBox and enable it in EdXposed Manager
5) Reboot