Database Info

Xposed on 5.0.1

Has anyone had success installing xposed framework on the m8 running a stock rooted lollipop rom? I have tried multiple times following the guide in the xposed thread here http://forum.xda-developers.com/showthread.php?t=3034811 with no success.

It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.

jas88 said:
It worked for me on adrenaline 2.1 but not on a couple of other roms I tried.
Click to expand...
Click to collapse
What were the steps you took to install it?

I opened xsposed installer >framework > reboot. I only downloaded a couple of modules but they work.

nmarietta said:
What were the steps you took to install it?
Click to expand...
Click to collapse
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.

BladeRunner said:
what steps are you using to install xposed? I have it working on Fluent 7.1 just fine.
Click to expand...
Click to collapse
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.

nmarietta said:
I downloaded the files from the link I posted above..
Install the xposed installer .apk
Reboot from within the installer and grant root privileges.
Flash the framework via TWRP
I have also tried to flash the framework first, install the .apk, and reboot from within the installer to grant root.
Neither way has worked for me.
Click to expand...
Click to collapse
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.

The Stig 04 said:
I have it running on stock rooted, here are the steps I took.
Flashed the xposed arm zip file in TWRP
Installed the 3.0 alpha2 apk
Once installed I went into "framework" and hit soft reboot.
Once the phone was done I installed a module/made it active and soft reboot again.
I don't think you have to take these exact same steps but this is just what I did following a YT video. In "framework" it always says "Installation is only possible maunally via recovery for now." in red letters. That confused me into thinking it was not installed properly but all the modules I'm using are working fine.
Click to expand...
Click to collapse
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.

nmarietta said:
I have tried to install this exact same way. After flashing the framework and installing the alpha .apk, I activated greenify and rebooted.
Upon launching greenify, I saw a yellow dialogue box that said auto hibernation service has stopped (auto hibernation worked fine before trying to use xposed) I attempted to enable the xposed features and a screen popped up telling me to install the xposed framework.
I have since restored my nand backup I made before flashing xposed, and greenify is back to auto hibernating, just cant use the xposed features.
Click to expand...
Click to collapse
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify

The Stig 04 said:
Have you tried installing other modules? Looking around the greenify sections here on XDA seems it wasn't ready for 5.0, but there is a beta thread that you may want to take a look at.
http://forum.xda-developers.com/apps/greenify
Click to expand...
Click to collapse
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.

nmarietta said:
I just found that beta thread, and I am now trying to install xposed again.
I also tried Xsense, and did not have any luck.
What modules are you using? I will activate them and test.
Click to expand...
Click to collapse
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback

The Stig 04 said:
Currently I'm using
Sense 6 lockscreen mods (LP)
Sense 6 Toolbox beta (to find the beta you have to change your settings, open the module in xposed/scroll all the way right to settings/change to "beta")
YouTube AdAway
YouTube Background Playback
Click to expand...
Click to collapse
I reinstalled xposed, and updated greenify to beta 11. I also installed Sense 6 Toolbox beta. Everything seems to be working just fine.
My problem was using modules that were not updated to work with lollipop. Thanks for all your help!

OTA 4.2 Installation Error on rootet Shield

Hello!
I need some Help with my Shield Tablet. I own the "Nvidia Shield 32GB LTE" Version and did root it 2 or 3 Days ago. Now i got the Message for the new "4.2 Upgrade" but after trying to install said Upgrade, i get the laying Android with an "Error". I tried the Installation 2 Times with the same Result. Do i have to Factory Reset my Shield to be able to install OTA 4.2?
I have no Experience with anything related to Software modification and got my root with a YouTube Tutorial on the Shield. I'd like to keep the root, and would reroot if necessary.
Any Help is appreciated!
Informations that may be helpfull:
- I have the Nvidia Family Drivers installed
- I have "minimal ADB and Fastboot "
- I own the "32GB LTE P1761" Model
- I have Android 6.0.1 installed with the Security Patch from 1. March 2016 and Shield 4.1 (24.3.67.35) Software
- I used the "TUTORIAL - Root NVIDIA SHIELD Tablet / K1 - Android 6.0" Tutorial on YouTube

Once you're rooted, you cannot update via normal means as the regular OTA update will check the system partition to make sure it is untouched.
The easiest way to update is to simply have the updater download the Full OTA and install. Go to Settings -> About tablet -> System upgrade -> 3 vertical dots on top right -> Advanced -> Check full upgrade (check it).
When it updates, it will remove root and very likely the TWRP recovery.
After it's updated, you can then go back and flash TWRP 3.0.2-2 to the recovery partition and then flash SuperSU 2.76 within TWRP. You may have older versions of TWRP and SuperSU if you used the YouTube tutorial, so be sure to get these newer versions.

Thanks for the the Advice, it helped!
Now im facing another Problem. After updating and rerooting, i can't use Lucky Patcher to install FakeGPS as an System App. I get the Error "there is not enough space within the system partition to move the application. please free up space in /system then try again.". I should have plenty of Space left on Internal and the full 180GB on my SDXC but it doesn't want to install. :I Any Suggestions?
Also "Hide my root" tell's me that it can't finde the "su binary".
Damn i want a one-push-do-it-for-me button. :crying:

[email protected] said:
Thanks for the the Advice, it helped!
Now im facing another Problem. After updating and rerooting, i can't use Lucky Patcher to install FakeGPS as an System App. I get the Error "there is not enough space within the system partition to move the application. please free up space in /system then try again.". I should have plenty of Space left on Internal and the full 180GB on my SDXC but it doesn't want to install. :I Any Suggestions?
Also "Hide my root" tell's me that it can't finde the "su binary".
Damn i want a one-push-do-it-for-me button. :crying:
Click to expand...
Click to collapse
Your not allowed to discuss LP here so I can't help with that. But if I were you I'd look at enabling compatibility mode in supersu. This helps with programs that haven't been updated to work with systemless su. I think the reason you can't install as a system app is because the program isn't properly calling su.
Sent from my SHIELD Tablet K1 using Tapatalk

I haven't found anything regarding compatability mode in supersu. Hidden option?

[email protected] said:
I haven't found anything regarding compatability mode in supersu. Hidden option?
Click to expand...
Click to collapse
Google search it. It's a command you can enter, I think in adb, that will let legacy root apps be granted root properly. I know it's all over the supersu thread in relation to es file explorer
Sent from my Nexus 5X using Tapatalk
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
Exile1975 said:
Google search it. It's a command you can enter, I think in adb, that will let legacy root apps be granted root properly. I know it's all over the supersu thread in relation to es file explorer
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Also, do you have busybox installed? If not start there
Sent from my Nexus 5X using Tapatalk

Yes I have busybox installed, but didn't help much. I will look in to Factory reset since I don't have private Data on this Tablet and I belive i may have done something wrong with the reroot.
I did a quick search on the supersu compatibility mode bit with no useful Results.

[email protected] said:
Yes I have busybox installed, but didn't help much. I will look in to Factory reset since I don't have private Data on this Tablet and I belive i may have done something wrong with the reroot.
I did a quick search on the supersu compatibility mode bit with no useful Results.
Click to expand...
Click to collapse
https://r.tapatalk.com/shareLink?ur...hare_fid=3793&share_type=t&share_pid=67710325
[BETA][2016.07.05] SuperSU v2.76
Sent from my Nexus 5X using Tapatalk

Thank you Guys for all the Help! \o/ Feel Brofistet from me.
I found the cause for the Error. It was the actual .apk that i tried to install. I went back trough my Chrome History to find the first one i used and it worked flawlessly. I sometimes have to wonder how i survive outside my Room...

Problems with installation of Marshmallow on a Tab 2 5113 with 4.1.1

I hired someone not super familiar with flashing a custom rom, but who knew more than me. We got MM installed but I am having some problems. First, the only reason, I updated the rom was to get mirroring. However: 1. there is no mirroring, but there is cast. I have a Tab 4 and mirroring works perfectly with it and KitKat. I tried about 5 mirroring apps from the Play Store and they all require that the Smart TVs I have (Samsung and LG) be connected to the Internet because using the TV's internet connection is a major nuisance for me. That is not required with my KK Mirroring, and I am wondering whether I should get rid of MM and flash KK. Or, is there an app that will work without mirroring. 2. My SD card is now invisible. When I link my Tab to my windows 7 computer, my SD card doesn't show. (Additionally, come to think of it, none of my files show. All I get is an image of 5100, but when I click on it nothing shows on my windows 7 computer.) 3. Probably related to No. 2 -- Some apps seem to install, but I have no way to access them because no shortcut is placed on the screen and I have no tree of files. (Titanium Backup for instance, can't be accessed. However, when I downloaded ai-keyboard, it mostly worked)
Hate to ask so many questions, but this is what I now have. Would call the person who did the flash, but his wife is due any day, and for all I know, gave birth yesterday.

which M Rom did you installed? kindly mention Rom and recovery build number as well.
are you using any other home launcher than the default? how did you installed titanium backup? normal or copy pasted apk to the system partition?
have you checked the luncher setting? for instance I can hide some apps from the nova launcher but can find it with it's search bar.
check with the default launcher or any other.
did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?
I haven't tested screen mirroring with this device. although I checked briefly with a Samsung S, S4 and a G3 on a LG smart tv with webOS 3 using LG TV plus app, I had to be on a same network with wifi hotspot enabled from my device (didn't required a working internet) and selecting LG tv plus option from the TV.
I still haven't been used to with screen mirroring and cast. so others can help.

Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.

decijp said:
Hi Billys,
Thanks a lot for your response. My Internet has been down for about 2.5 days and that is the reason I am late responding to you. The CM version was 13.0.20160222-2140-UNOFFICIAL -P5110. The CM Recovery Version was GT-P5113 CM Recovery 6.0.1.0.tar.
The Launcher is the default that comes with MM. I installed Titanium Backup through the Google Play Store. I have been fooling around with the device and Root checker basic says that root access is not properly installed, which might explain why Titanium Backup is not working. Also, SuperSu won't open.
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
Device specific builds are too outdated. Kindly flash these depending on your model
Espresso3g - P3100 & P5100
EspressoWifi - P3113, P5113, P3110, P5110
For more info, visit this thread http://forum.xda-developers.com/gal...fied/rom-cyanogenmod-13-cm13-0-t3303798/page1
And flash it with the latest TWRP recovery found on andi34.github.io under recoveries
Sent from my espresso3g using XDA Labs

Root is enabled through developer options. Go settings, about tablet. Tab build number 7 times. Back out and open dev options. Scroll down a bit and enable roo & adb. You should be good to roll then
Sent from my SAMSUNG-SM-G870A using XDA Free mobile app

Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.

decijp said:
Champ1919,
I did what you suggested and was able to download TWRP from Andi's. I unzipped the file with the ES File Explorer. Nothing happened. Could you tell me what I should do next. Thanks again.
Click to expand...
Click to collapse
if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery.

decijp said:
Hi Billys,
You asked me: "did you unlocked the tab while it was connected to your pc? did you changed the mode to MTP?" Don't understand the questions, particularly the second one. If you could be more explicit maybe I could answer the question. Thanks again for your help.
Click to expand...
Click to collapse
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well

billysam said:
when you connect the tab to PC, there is a logo of CM in the status bar, drag the notification menu, and tap the CM menu, there, check If MTP is enabled or it's set on charging only mode. you can also set this in setting-developer. make sure the keypad is not locked as well
Click to expand...
Click to collapse
Billys,
There was no CM logo, but went to settings and USB and you were right. Now I can view the files of my tablet on my PC. Thanks a lot.

Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?

decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
It won't automatically get the zip file because you select the zip you flash. Just navigate to whet you put the zip and flash that
Sent from my espresso3g using XDA Labs

decijp said:
Smart-T "if you want install or upgrade twrp, dont extract the zip. boot into recovery and install it with your current recovery. "
I did the recovery boot, and it shows CWM v. 6.0.1.0. It also shows install zip from sd card. However, I have multiple zips on my sd card. How can I be sure that it is installing the right zip? Will it automatically grab the right zip file.?
Click to expand...
Click to collapse
install the latest twrp by using cwm. after install reboot back into recovery. you shuold see the graphical differences between twrp and cwm.

To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.

decijp said:
To make a long story short, it appears that my Superuser is misbehaving. Used root checker to analyze and it found that Superuser was installed and that SU Binary files were installed. However, it found a Root User Account Error. (Error: stderr: null, stdout: null, exit..value: 1) It suggested that I reinstall Superuser app from TWRP. .
After much experimentation, I can get into TWRP when I reboot in the recovery mode. (not when I hit the icon on home page -- tells me I need root access) When I hit install, I see CWM 13, An android 4.4 (omni-4-4-4-20160305-1323 expresso-HOMEMADE.zip) and a gapp 6 --- a long time ago when I downloaded 4.4, I didn't know how to get to the corresponding gapp, so I didn't do so. Also, SuperUser doesn't show up at this place, so I don't know how to reinstall it.
Can anyone tell me how to reinstall Superuser and get full SuperUser access?
Also, I am thinking of going back to Android 4.4 to get mirroring. Can someone point me to the gapp file for that. Additionally, when I possibly would be installing 4.4, would I first install 4.4 and then reboot and install gapps. Or should 4.4 and gapps be installed at the same time?
Thanks for everyone's help. Sorry to ask so many questions. However, have gone to youtube and web many times and still am confused about what is going on.
Click to expand...
Click to collapse
If you installed CM13, is actually pre rooted. Just enable it from the developer settings
Sent from my espresso3g using XDA Labs

Finally figured out that I could transfer SuperSu zip file to my Tab and then install it from TWRP. Did so and also wiped clean the cache and now SuperSu is functional and I can get rid of the bloatware and speed up the Tab. Thanks for everyone's help.

Brand new HD 10 what to do first?

Hey everyone. Sorry for the noob questions.
I just got a 2017 hd 10. Haven't booted it yet. Would like to root, install gapps, and have Nova as default. My hope is to use it like a normal Android tablet.
Should I root before updating? Can I update after the root? Would the update even matter if I'm using Nova?
Thanks!

sykozylot said:
Hey everyone. Sorry for the noob questions.
I just got a 2017 hd 10. Haven't booted it yet. Would like to root, install gapps, and have Nova as default. My hope is to use it like a normal Android tablet.
Should I root before updating? Can I update after the root? Would the update even matter if I'm using Nova?
Thanks!
Click to expand...
Click to collapse
What version FireOS? You can only root from PC, so no need to worry about updates until you turn on wifi. When ready change the name of /system/priv-app/DevicSoftwareOTA/DeviceSoftwareOTA.apk by putting a _ at the end of it so it's .apk_
If you flash gapps, you may need to uninstall a few Amazon apps. Set up FlashFire accordingly and download pico gapps 5.1.1 and flash it. Debloat from there. Use rooted activity launcher to explore Amazon apps. Before registering to Google, use it to launch Amazon device settings, prod and devo mode. Put the device in devo mode. This may assist in debloating and when you get enough space, flash nano gapps. Don't uninstall what you don't know. Install my Framework and FireTabletSettings APKs for an even better experience. Simple search of this forum will reveal them. Here is activity launcher, download zip and unzip. https://github.com/DerekZiemba/RootActivityLauncher
Sent from my Moto E4 using XDA Labs

DragonFire1024 said:
What version FireOS? You can only root from PC, so no need to worry about updates until you turn on wifi. When ready change the name of /system/priv-app/DevicSoftwareOTA/DeviceSoftwareOTA.apk by putting a _ at the end of it so it's .apk_
If you flash gapps, you may need to uninstall a few Amazon apps. Set up FlashFire accordingly and download pico gapps 5.1.1 and flash it. Debloat from there. Use rooted activity launcher to explore Amazon apps. Before registering to Google, use it to launch Amazon device settings, prod and devo mode. Put the device in devo mode. This may assist in debloating and when you get enough space, flash nano gapps. Don't uninstall what you don't know. Install my Framework and FireTabletSettings APKs for an even better experience. Simple search of this forum will reveal them. Here is activity launcher, download zip and unzip. https://github.com/DerekZiemba/RootActivityLauncher
Sent from my Moto E4 using XDA Labs
Click to expand...
Click to collapse
Thanks. My version is 5.6.01.

Ok, I am now rooted with Nova installed as a system app.
Also, noob question. How do you enable Reboot from the power menu? I only see shut down.

sykozylot said:
Ok, I am now rooted with Nova installed as a system app.
Also, noob question. How do you enable Reboot from the power menu? I only see shut down.
Click to expand...
Click to collapse
You can't. So far any app or module I've tried has not worked.
Sent from my Amazon KFSUWI using XDA Labs

DragonFire1024 said:
You can't. So far any app or module I've tried has not worked.
Sent from my Amazon KFSUWI using XDA Labs
Click to expand...
Click to collapse
Yeah nothing works off the power button but the standalone apps like quick reboot or reboot manager will reboot and such via app

sykozylot said:
Ok, I am now rooted with Nova installed as a system app.
Also, noob question. How do you enable Reboot from the power menu? I only see shut down.
Click to expand...
Click to collapse
you cant, you gotta download one of those "reboot" apps
also, i did exactly what you did (took it out the box and wiped almost all the amazon crop off it lol) and it worked awesomely. the only thing i found was to set your lockscreen image you need to use the amazon photos app (it will change both your lockscreen and homepage wallpapers), and then you can use the app of your choosing to change your homescreen wallpaper

Nope.

Nope.
^Preemptively answering all PMs.

This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol ?

Thanks for this. Can you tell me if the transcripts for screened calls are available with this?

mikkis2k said:
This sounds amazing, May i ask for a very wanted feature? Android 10(Q) battery! If you make this possible ill love you to the ends of the world and donate a bottle of something good lol
Click to expand...
Click to collapse
What are you asking for?

lollyjay said:
Thanks for this. Can you tell me if the transcripts for screened calls are available with this?
Click to expand...
Click to collapse
I'm not sure if call screen saves the transcript, but I've interacted with live transcriptions with multiple responses. You can see my screenshots in the other call screen thread.

TotallyAnxious said:
What are you asking for?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?

mikkis2k said:
https://forum.xda-developers.com/oneplus-6/themes/magisk-aod-lockscreen-weather-mods-oos-t3847008
"v1.7 (23/04/2019)
- Add Android Q battery icon style"
This, if its possible tho, its weird that the oneplus 6 thats on pie can and we cant, you think its possible? ?
Click to expand...
Click to collapse
No idea. I'll maybe look into it. But it's not something that immediately hits me as "hey I can do that". I'm incredibly lazy and stoned a lot (stage 3 colon cancer survivor). So keep that in mind lol

Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
Well dang, I still can't get call screening even with this. That's the only feature I truly missed when I left pixel 2 xl for a op7pro. I just have the worst luck trying to get it back.
Also I had a super nice stable device on 9.5.13 with root and a lot of nice things and the only reason I even went to 10 was the other thread said it was working on 10 and xxx said it worked on 10 and now I've been on 10.0.1 for 3 days and it's the buggiest thing I've used ever
Click to expand...
Click to collapse
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215

TotallyAnxious said:
It's incompatible with your set up or you didn't follow the directions. (I'm not angry). But I've posted screenshots proving it works
So try eliminating variables till it works.
https://forum.xda-developers.com/on...bling-google-pixel-call-t3946535/post80596215
Click to expand...
Click to collapse
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
Well I am on the T-Mobile version converted to international so mine is the gm1915 which you already said might not work. I completely clearer out every magisk module I had, rebooted to a stock rooted phone and things were fine, installed your first module, rebooted things were fine, installed the companion module and get a bootloop. Thankfully I have twrp and uninstalled the companion module and now it boots. I just have a gut feeling it's not going to work on here and I REALLY hate wiping my data so I'm just going to wait and see if someone else makes a breakthrough on the gm1915 model
Click to expand...
Click to collapse
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.

TotallyAnxious said:
Well you didn't follow the instructions. You didn't install Google phone. Please reread.
If you don't install Google phone before flashing the companion. It won't boot.
I provided clear instructions. Follow them and you'll get call screen.
How to install (Magisk Manager or TWRP):
0. Uninstall kirisakura kernel companion, it's included.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk in the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
Also you should pretty much always have BusyBox installed if you're rooted.
Click to expand...
Click to collapse
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Sent from my OnePlus7Pro using XDA Labs

spart0n said:
I have no idea what kirisakura kernel companion is, but is compatible with Smurf kernel? Could that be my problem?
I also had Google phone installed before I did this, I preferred it over oos dialer from the start
Click to expand...
Click to collapse
You should follow the instructions. If it says install Google phone, you should do that. If it's already installed that means you should uninstall to install. And it's just a handful of shell script commands. It is NOT the issue.
I'm not trying to be difficult. But you've twice not followed the instructions. If you don't follow them. It won't work.
The instructions were set up specifically for this. The non-boot that is caused by Google phone being installed as a system app prior to being a user app. I have no idea why in hell that would cause a non-boot. But it does. As I said I am very lazy. I did everything I could to make this a one and done module. So I wouldn't have to provide much support.
Kirisakira companion is listed as feature but I actually rewrote it and that will probably be put into the original mod from freak07. It's just to emphasize not needing to install both.

I think it's ridiculous it requires instructions but it's the only consistent way I've found to get all the listed features working. Please please please ? ?? read them carefully and follow them. Meaning the below paragraph is the ridiculous part btw.
It makes no sense Google phone causes a non-boot when installed as system app first. Even in a module by itself. It causes that.
I spent a week figuring out the easiest way to do this. And I got it down to under 10 steps. Please follow them.
I even spent time leanring how the unity module template works ecause the companion module is unity. And I'm really lazy.
Simplified instructions
How to install (Magisk Manager or TWRP):
0. Uninstall Kirisakura kernel companion and Google Phone, if both/either are installed. Reboot if you uninstalled.
1. Install "Anxious7Pro_v*.zip".
2. Reboot.
3. Install google phone apk from apkmirror or just use the apk inside the companion module.
4. Set up google phone, i.e. grant all permissions (including "Draw over other apps" and "Modify system settings"), set as default phone app, open app and set up available features.
5. Install "Anxious7ProCompanion_v*.zip".
6. Reboot.
7. Profit.
If you don't follow the instructions, you'll probably end up in a non-boot/bootloop.

@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Sent from my JiaYu S3 using XDA Labs

lollyjay said:
@TotallyAnxious I will post here. I will be doing clean install of Beta 4 in a couple of hours, and post feedback here. One question though... I am a beta tester for Google Phone. Should I not use it, and instead install the nodpi version of latest .APK that you linked?
Click to expand...
Click to collapse
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.

TotallyAnxious said:
Didn't you just confirm it works with that screenshot? And I use beta too. But I have stable in the companion module and you can use any verison. I just don't want to provide a non stable starting point. I get less issues reported that way haha you'll learn overtime I consider how to minimize the effort I need to put into support beyond the OP. I'm incredibly lazy.
Click to expand...
Click to collapse
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Sent from my JiaYu S3 using XDA Labs

lollyjay said:
lol same here (lazy). But I think that testing your modules with clean beta 4 install is worth the time and effort.
Click to expand...
Click to collapse
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works? Until it's posted here, people can click the link to see it.
https://forum.xda-developers.com/on...-nolimits-7-0-speed-ram-t3933927/post80645203

TotallyAnxious said:
I don't think it is but I haven't tried beta OnePlus software yet. But I doubt it's gonna be that different with a clean install. Can you post the screenshot here so people see it works?
Click to expand...
Click to collapse
Sure, np
Sent from my JiaYu S3 using XDA Labs

Hi, Ive just followed the instructions and got this working.. but i previously had the google phone installed as system app so went to my uninstaller and uninstalled 3 things, phone, phone .com and android.phone i think it was and now i have no mobile data.
Any idea what i install again to get this back? Thanks!