Hello! I have galaxy s6 duos and want to flash firm http://live.samsung-updates.com/details/48693/Galaxy_S6/SM-G920F/SEK/G920FXXU2BOFJ.html with region csc SEK, BUT this firmware are multi csc and always applies region SER....... what i can do with this without root and tripping knox ?
Try flashing this latest 5.1.1 ROM (CSC: SEK) via odin. After flashing go to recovery mode and do full reset.
If it does not work bring your S6 back to Samsung for free factory reflash to enable your region CSC.
http://www.sammobile.com/firmwares/download/52961/G920FXXU2BOG8_G920FOXE2BOG8_SEK/
Are you sure that your phone has SEK as CSC? If you flash a multi CSC rom and SER is automaticlly applied, then your phone has SER CSC.
You can change that by flashing the SEk firmware and do a factory reset afterwards. That will wipe your phone and change your CSC to SEK.
Here you go. Latest 5.1.1 stock ROM (CSC: SEK) for you to flash ASAP via odin to hopefully restore your CSC to SEK.
http://www.sammobile.com/firmwares/download/52961/G920FXXU2BOG8_G920FOXE2BOG8_SEK/
After installing android will select the CSC from those available and match it to the one already on the phone.
The only way to change your CSC is to root and then use the Samsung CSC changer .... but why? as the firmware will stay the same.
XxM4tzexX said:
Are you sure that your phone has SEK as CSC? If you flash a multi CSC rom and SER is automaticlly applied, then your phone has SER CSC.
You can change that by flashing the SEk firmware and do a factory reset afterwards. That will wipe your phone and change your CSC to SEK.
Click to expand...
Click to collapse
from factory my phone haved csc from mauritus, im flashed ser firm and changed it, after that im tried original firmwares with csc from france, england, netherlands, and then flashing csc with SEC code and nothing - always applied csc SER.... this firmware witc csc SEK contains multiregions csc SER SEK SKZ CAC but i dont know why always apllied region SER
hardyboy_samy said:
After installing android will select the CSC from those available and match it to the one already on the phone.
The only way to change your CSC is to root and then use the Samsung CSC changer .... but why? as the firmware will stay the same.
Click to expand...
Click to collapse
because we have apps wich cant be installed with region SER, only SEK
aratta said:
from factory my phone haved csc from mauritus, im flashed ser firm and changed it, after that im tried original firmwares with csc from france, england, netherlands, and then flashing csc with SEC code and nothing - always applied csc SER.... this firmware witc csc SEK contains multiregions csc SER SEK SKZ CAC but i dont know why always apllied region SER
because we have apps wich cant be installed with region SER, only SEK
Click to expand...
Click to collapse
so it seems that u should root then change CSC ................but i believe that the apps on play store determine your region by internet connection ,and apps which are installed with the fresh rom should be available on play store for free you can simply find then instead of tripping knox......any way if u need help i can help u ....i have changed my CSC code by rooting my device as it's already out of warranty
*#272*IMEI#
Sent from my SM-G920W8
Related
Evening all,
Am from Cyprus and my original CSC was CYO. Tried the newest French and uk updates which i flashed via odin (got them from sammobile) and although i was satisfied by the updates i decided to go back to my original firmware and wait for the OTA to arrive. Got this from samsung-updates: CYO-G920FXXU1AOCV-20150409223200
Device Name : Samsung Galaxy S6 Edge SM-G925F
Device Model : SM-G925F
Region Country : Cyprus (cytamobile vodafone)
Firmware Version : G925FXXU1AOCV
OS Name : Lollipop
OS Version : 5.0.2
Date Update : 2015-03-28
Region Code : CYO
Change List : 4497415
flashed it via odin and now my CSC is TPH (PORTUGAL)
Original CSC TPH
Firmware TPH
Active SCS TPH
CSC Country ISO PT
Any ideas? I downloaded the CY firmware from three different locations and got same results.
Thanks
Well I rooted phone via ping-pong and used phone info app to change csc to cyo. Then wiped data from recovery and flashed the cyo firmware again via Odin. Now my csc is correct but in csc country it says greece. Am confused really. The firmware I have is clearly for my region which is cyprus
If the firmware is multi-csc, try *#272*IMEI# and choose your CSC.
Elisha said:
If the firmware is multi-csc, try *#272*IMEI# and choose your CSC.
Click to expand...
Click to collapse
Hi, yes the firmware is multicsc and i tried that. CSC says CYO but csc country is wrong. It should have been CYprus instead of Greece
that's so stupid thing. I have the same problem with my Samsung and can't set the right CSC from the Rom file. It really sucks... any help will be useful for me...
Hello.
Is it possible to use Nougat UK firmware G930FXXU1DPLT for my unlocked german phone. It currently has G930FXXU1BPLB. The phone CSC is DBT with CSC country of Germany/DE. Country of Origin: made in Vietnam.
I did search but can't confirm from what I've read so far.
Thank you.
Yes you can just did it some hours ago and it's working like a charm
Ok, I flashed nougat and all went well.
I used the lasted firmware from here: http://updato.com/firmware-archive-select-model?record=38264056ECF011E69215FA163EE8F90B
Country/Region: United Kingdom
PDAG930FXXU1DQB3
CSCG930FOXA1DQB1
PhoneG930FXXU1DQB1
However, my csc is still DBT instead of BTU. I checked "re-partition" per instructions here: https://www.sammobile.com/forum/showthread.php?t=30800
How do I get BTU to stick? I even tried going into recovery and wiping and factory resetting. It didn't work.
Why do you ant BTU?
The BTU is a Multi-CSC which also beside others include the DBT-CSC.
I think soon we will have the offical Nougat DBT then you might need to flash again with Odin, if you want to have OTA-Updates.
Also you do not have to enable "Re-Partition". Just flash with the normal CSC (not the HOME_CSC if you want to change your CSC) but keep in mind that with flashing the normal CSC all data on the internal ROM is lost.
maik005 said:
Why do you ant BTU?
The BTU is a Multi-CSC which also beside others include the DBT-CSC.
I think soon we will have the offical Nougat DBT then you might need to flash again with Odin, if you want to have OTA-Updates.
Also you do not have to enable "Re-Partition". Just flash with the normal CSC (not the HOME_CSC if you want to change your CSC) but keep in mind that with flashing the normal CSC all data on the internal ROM is lost.
Click to expand...
Click to collapse
Thanks for the reply.
I wanted BTU because I've read on several posts that I won't receive OTA updates if CSC is crossed with BTU and DBT. I also wanted samsung apps to stop defaulting to Deutschland since I can't read it.
Thanks again.
2545 said:
Thanks for the reply.
I wanted BTU because I've read on several posts that I won't receive OTA updates if CSC is crossed with BTU and DBT. I also wanted samsung apps to stop defaulting to Deutschland since I can't read it.
Thanks again.
Click to expand...
Click to collapse
I have a DBT S7 and I flashed the BTU version as well. Just select Home CSC and it will keep all your data saved. If you select CSC_ it will erase the phone. Also the apps are in German based on location. You will need a VPN to use some apps in English
Question:
Firmware for Germany has now been released. Should I now download the Germany firmware and replace my BTU (UK) firmware? Or since only the CSC file seem to be different, should I Odin just the CSC file?
I wan't to flash DBT (Germany) OEM software from Sammobile to my S8+ G955F model which is on SEE region. Is it OK? I forgotten about these regions since I haven't flashed different region since S5.
I wan't to completely change software. From SEE to DBT. Should I install AP and PDA or AP,BL,CP,CSC OXM,Home CSC OXM? I want to change modem firmware as well. Everything I see this much files first time. Dont know except AP and PDA these other what they are for. Can someone tell me?
THX
stefan063 said:
I wan't to flash DBT (Germany) OEM software from Sammobile to my S8+ G955F model which is on SEE region. Is it OK? I forgotten about these regions since I haven't flashed different region since S5.
I wan't to completely change software. From SEE to DBT. Should I install AP and PDA or AP,BL,CP,CSC OXM,Home CSC OXM? I want to change modem firmware as well. Everything I see this much files first time. Dont know except AP and PDA these other what they are for. Can someone tell me?
THX
Click to expand...
Click to collapse
2 words: NOT POSSIBLE...
The SEE CSC is part of the Multi-CSC OXM; DBT is also part of the Multi-CSC OXM
When you flash the DBT firmware, your CSC will stay SEE because both CSC's are included in the OXM MultiCSC, and the product-code of your device is SEE (you can't change that)...
All European countries (and some African & Asian) are part of the Multi-CSC OXM; all firmware for those countries are the same (also modem!)
When you flash in Odin, 3.12.3, you must flash 4 files:
AP BL CP & CSC_OXM (this will reset your device) or HOME_CSC_OXM (data will stay intact)
Hello fellas,
I have just flashed latest stock firmware, and couldn't help noticing there was no Samsung Pay or Android Pay app.
When attempting to access both items through Google Play Store, it says my device is not compatible with the version available. How come this is possible? I can't think that the S7 has been outed of Samsung Pay, there has to be something else.
Could it be a problem with the CSC? My region code is ARO (Argentina Unbranded), but after checking the app Phone Info, I have realized that the CSC Installed belongs to TTT (Trinidad y Tobago) and not my region. This always happen when flashing CSC, since it's a multi-CSC, it randomly selects a region. If anyone knows a way of flashing the proper CSC through ODIN, that would be awesome.
Thanks!
hemp_invader said:
Hello fellas,
I have just flashed latest stock firmware, and couldn't help noticing there was no Samsung Pay or Android Pay app.
When attempting to access both items through Google Play Store, it says my device is not compatible with the version available. How come this is possible? I can't think that the S7 has been outed of Samsung Pay, there has to be something else.
Could it be a problem with the CSC? My region code is ARO (Argentina Unbranded), but after checking the app Phone Info, I have realized that the CSC Installed belongs to TTT (Trinidad y Tobago) and not my region. This always happen when flashing CSC, since it's a multi-CSC, it randomly selects a region. If anyone knows a way of flashing the proper CSC through ODIN, that would be awesome.
Thanks!
Click to expand...
Click to collapse
Hi
Download the firmware you want, extract BL , CP and AP , now download the firmware for you country /carrier , extract from it the CSC file
not home_csc , and flash the BL , CP, AP from the first firmware with the CSC from your country
BAckup this will factory reset your phone
MAX 404 said:
Hi
Download the firmware you want, extract BL , CP and AP , now download the firmware for you country /carrier , extract from it the CSC file
not home_csc , and flash the BL , CP, AP from the first firmware with the CSC from your country
BAckup this will factory reset your phone
Click to expand...
Click to collapse
Thanks for replying.
The firmware I want is the one that comes with the ARO package, the problem is that such package also includes a multi-country CSC. Among those there is this ARO region I'm needing. My device is Unbranded, I won't install a CSC from a carrier.
Also, I don't have root and I'm not planning to have it either.
hemp_invader said:
Thanks for replying.
The firmware I want is the one that comes with the ARO package, the problem is that such package also includes a multi-country CSC. Among those there is this ARO region I'm needing. My device is Unbranded, I won't install a CSC from a carrier.
Also, I don't have root and I'm not planning to have it either.
Click to expand...
Click to collapse
Hi
Sorry I read your first post again
Samsung Pay will not work again after you root your phone , if knox is set 0x1 there is no chance to make it work
Android pay is possible if knox is set but firmware is official ( no root) and if the flashed firmware (CSC) has that option
Is ARO part of the multi CSC you flashed with TTT?
You need a CSC that has Android pay , do you remember what CSC you had when it worked?
MAX 404 said:
Hi
Sorry I read your first post again
Samsung Pay will not work again after you root your phone , if knox is set 0x1 there is no chance to make it work
Android pay is possible if knox is set but firmware is official ( no root) and if the flashed firmware (CSC) has that option
Is ARO part of the multi CSC you flashed with TTT?
You need a CSC that has Android pay , do you remember what CSC you had when it worked?
Click to expand...
Click to collapse
BTU. I will try that one. Thanks mate!
hemp_invader said:
BTU. I will try that one. Thanks mate!
Click to expand...
Click to collapse
BTU (UK) i think it works , if your carrier at home offers the service you can flash any unbranded firmware (BL, CP andAP) with the CSC from your carrier
That way you can have unbranded firmware plus you carrier CSC
Magisk fakes 0x0 doesn't it?
Beanvee7 said:
Magisk fakes 0x0 doesn't it?
Click to expand...
Click to collapse
yes , magisk hides from android SU detection but samsung pay also looks for knox 0 x 1 ....if you are or were rooted SP will not work
Beanvee7 said:
Magisk fakes 0x0 doesn't it?
Click to expand...
Click to collapse
Yes it does, but some additional kernel modifications are still required for Knox to work. So stock firmware isn't fooled. Most custom s7 kernels have them though.
Hi i want to know if anyone can help me, I have a samsung s8+ model SM-G55F i bought it online and the original csc code was TPA/TPA/TPA but I want to use Samsung pay in Mexico I tried flashing the Mexico firmware but it always change to the default multi csc in this case the mexico csc is IUS but now is CWW the default, How can I force it to this CSC?
meza85 said:
Hi i want to know if anyone can help me, I have a samsung s8+ model SM-G55F i bought it online and the original csc code was TPA/TPA/TPA but I want to use Samsung pay in Mexico I tried flashing the Mexico firmware but it always change to the default multi csc in this case the mexico csc is IUS but now is CWW the default, How can I force it to this CSC?
Click to expand...
Click to collapse
Flash this IUS firmware:
http://updato.com/firmware-archive-select-model?record=77FFCF79B9FD11E7963AFA163EE8F90B
Make sure to flash it while a local Mexican SIM card is inserted in the device, then do a factory reset after flashing and it should be on IUS.
CSC should say IUS/IUS/TPA then and Samsung Pay should work just fine.
Hi thanks for answering! Unfortunately i doesn't work I did that it goes to the default CSC CWW, Originally i wanted the TCE code or any of those Mexican CSC I have sim of both operators but when i flashed with the TCE the code change to CPA ( Panama) Claro is the same carrier as TCE but different name and both are in the same Multi CSC firmware any ideas what to do? Already tried the *# codes
Hello i change csc code in sm g955u from sprint . This solution it's works https://youtu.be/M-jOM9LXhqE
Wysłane z mojego SM-G955U przy użyciu Tapatalka
murtaza02 said:
Flash this IUS firmware:
http://updato.com/firmware-archive-select-model?record=77FFCF79B9FD11E7963AFA163EE8F90B
Make sure to flash it while a local Mexican SIM card is inserted in the device, then do a factory reset after flashing and it should be on IUS.
CSC should say IUS/IUS/TPA then and Samsung Pay should work just fine.
Click to expand...
Click to collapse
Why "to flash it while a local Mexican SIM card is inserted in the device"?
JeffDC said:
Why "to flash it while a local Mexican SIM card is inserted in the device"?
Click to expand...
Click to collapse
Because otherwise it won't change IUS to the active CSC.
Sent from my SM-G955F
murtaza02 said:
Because otherwise it won't change IUS to the active CSC.
Sent from my SM-G955F
Click to expand...
Click to collapse
I've got to think that through/don't get it. Here is what I'm understanding from what you wrote.
So if I set up a phone, say throw a different ROM/custom on it, and flash a specific CSC region, the (new) CSC will not 'take' if the country SIM I'm wanting to change to is not in the phone when I flash the CSC zip?
Am I understanding correctly?
If I am, why doesn't the phone, having the new CSC in it, let's say without having the SIM in it when it was flashed...
know what region it's going to soon lock-on/expect when it boots, based upon the newly flashed CSC software?
There must be some necessary interplay between the two (new CSC and SIM).
Thank you.
JeffDC said:
I've got to think that through/don't get it. Here is what I'm understanding from what you wrote.
So if I set up a phone, say throw a different ROM/custom on it, and flash a specific CSC region, the (new) CSC will not 'take' if the country SIM I'm wanting to change to is not in the phone when I flash the CSC zip?
Am I understanding correctly?
If I am, why doesn't the phone, having the new CSC in it, let's say without having the SIM in it when it was flashed...
know what region it's going to soon lock-on/expect when it boots, based upon the newly flashed CSC software?
There must be some necessary interplay between the two (new CSC and SIM).
Thank you.
Click to expand...
Click to collapse
If you're flashing a custom ROM and/or using the flashable CSC method, then it doesn't matter whether you have the SIM card or not.
If you are on stock ROM, and you want the CSC for your country to be the active CSC, then insert your SIM card, then flash stock ROM, or just do a factory reset while your SIM is inserted in the phone. It'll reboot and the new CSC will be active.
What if the correct csc is not packed with the rom?
https://www.sammobile.com/forum/showthread.php?t=39155 use this tutorial !!! It helped me !!! Change my csc from rom to: btu,phn,xeo and now i'm on dbt
let me know if this work, because i want to go back to csc ius and i cant i have the same problem
It works 100% Sam firmware tutorial !!! Status : official ; knox status 0x0 !!!
can you explain me a Little more detail what to do? because for be honest i dont understand very good
Just do it step by step and at step 5 in factory binary you will find a button named factory ime(not imei) and fype the code !!! Step by step !
amosolidu said:
Just do it step by step and at step 5 in factory binary you will find a button named factory ime(not imei) and fype the code !!! Step by step !
Click to expand...
Click to collapse
But what combination file do i have to download?
Seach with Google:
COMBINATION_FA70_G955FDXU1AQD1_CL11075180_QB130870 97_REV00_user_mid_noship.tar
meza85 said:
Hi i want to know if anyone can help me, I have a samsung s8+ model SM-G55F i bought it online and the original csc code was TPA/TPA/TPA but I want to use Samsung pay in Mexico I tried flashing the Mexico firmware but it always change to the default multi csc in this case the mexico csc is IUS but now is CWW the default, How can I force it to this CSC?
Click to expand...
Click to collapse
Did you got it to work back with ius/tce firmwares?
Regards
meza85 said:
Hi i want to know if anyone can help me, I have a samsung s8+ model SM-G55F i bought it online and the original csc code was TPA/TPA/TPA but I want to use Samsung pay in Mexico I tried flashing the Mexico firmware but it always change to the default multi csc in this case the mexico csc is IUS but now is CWW the default, How can I force it to this CSC?
Click to expand...
Click to collapse
Algún avance con tu problema?, yo estoy en las mismas, saludos!
Blackwalrus said:
Algún avance con tu problema?, yo estoy en las mismas, saludos!
Click to expand...
Click to collapse
Lo sulucioné, mi celular es un S8+ comprado en Club Premier de Aeromexico. Versión latina, con CSC TPA...
Ya lo cambie a IUS y funcionó!!!
Saludos!
---------- Post added at 05:02 AM ---------- Previous post was at 04:42 AM ----------
So I finally managed to change my CSC from TPA on my unbranded S8+ (G955F) to IUS, and now I can use S Pay.
This is what I did:
1. Downloaded this Combination File from https://firmware.gem-flash.com/index.php, I had to pay $3 USD to get access to the download.
COMBINATION_FA70_G955FXXU1AQD1_CL11075178_QB13087097_REV00_user_mid_noship.tar.md5.rar
2. Downloaded Odin 3.12 (latest), other versions did not work.
3. Downloaded this ROM:
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955F/IUS/
Latest version (January 1st, 2018), it is from ATT, but I dont care care about that haha.
4. Run Odin, download mode on phone and install firmware downloaded from SamMobile.
5. Restart phone, enter OS and do factory data reset.
6. Remove "hidden.img" from HOME CSC (included in firmware) with 7Zip. It has to be repacked to a Tar file.
7. Go back to download mode, open odin and choose the combination file under AP and the recently modified version of Home CSC under CSC.
8. Reboot and enter factory mode.
9. In Factory Imei input *#243203855#
10. Choose IUS as the new CSC.
11. Boot back to download mode.
11. Reinstall firmware, now using normal CSC file (not Home CSC).
12. Boot up to ATT Mexico phone.
13. Morir en paz.
meza85 said:
Hi i want to know if anyone can help me, I have a samsung s8+ model SM-G55F i bought it online and the original csc code was TPA/TPA/TPA but I want to use Samsung pay in Mexico I tried flashing the Mexico firmware but it always change to the default multi csc in this case the mexico csc is IUS but now is CWW the default, How can I force it to this CSC?
Click to expand...
Click to collapse
Solucionado! Cualquier duda me avisas.