[mod][fix]frequecy fix for all roms and kernels - YU Yuphoria

You may have faced this bug
-Not Able to Lock Frequencies
-Not able to Change Governor
Here is the Solution
Just Boot to recovery and flash this zip
Download Link
ANDROID FILE HOST - FREQFIXbyRAZORSHARP.zip
GOOGLE DRIVE - FREQFIXbyRAZORSHARP.zip
CREDITS
VARUN CHITRE( FOR HELP)

Ya I got that bug in cm12.1 official. Can I flash your zip? How does it work?

Not working even on stock

Thank you. It worked flawless on cm 12.1 1408 build. Thank you dude. What was the bug about?

Related

[ROM][CM10] [Alpha] CyanogenMod 10

This is a project I started after building CM 10, Paranoid Android and PAC-man for the Galaxy Exhibit. It branched to the Galaxy W because of the similarity of our phones and then was asked to build it for Galaxy S plus I have to admit I was a little nervous building for phones I do not own but what the hey. Anyways ramblings aside here it is.
CyanogenMod 10
Many Thanks to Doomsday94, Alex91917, ivendor, Jocala, IRX120, Bpear, and last but certainly not least the infamous Arco 68 for whom we all owe for his great development.
Standard Disclaimer Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, or any other issues that may arise from flashing this ROM !
That being said it has been tested by Doomsday94 and Alex93917 and here is the working not working.
Working:
Phone !
Data
WIFI
GPS
Camera
WIFI Tethering
Not working:
And anything else you can find
Please post suggestions here and as I always suggest ROM wipe before installing and make sure you have a nandroid backup of your currently working system.
For flashing this rom in all recoverys ( as TWRP) you have to update the API of flashable zip in API 3. Thanks AlessandroXCV for the info
This is my recommended JB gapps works great for me and is highly customize-able JusTunBean JB4.2 aroma v4.1.2 Please follow his directions for Aroma and you wont be disappointed. This is just my preference you can install any gapps you like.​
Latest Build:
CM 10 11/18/2012
Changes are using native camera instead of legacy.
Hopefully front camera orientation fixed.
Older Builds:
CM10 11/17/2012
Latest with working camera
Use the following kernels at your own risk people have reported lag and freezes. I cannot confirm I do not own this device.
OC kernel by Doomsday94/CastagnaIT
Modules if needed
unpack it,you'll see modules folder. copy it to your sd card. then use root explorer and copy all the files inside the modules folder ( DON'T COPY THE ENTIRE FOLDER) to system>lib>modules. replace the existing files. set permissions. (rw-r-r) . then reboot. enjoy,overclocking power. should work with pacman as well.
Compliments of blackmambazzz
CastagnaIT´s Kernel 7.3 for CM10 by blackmambazzz
- Working BLN (lib lights integrated)
- Overclocked and undervolted
- Brian F*ck Scheduler (BFS)
- lulzactive Governor
- Modules by doomsday94 integrated (for working WiFi)
- New CM10 bootsplash image
OC/UV Version
OC/ExtremeUV Version
Dont forget to wipe Cache/Dalvik Cache and Fix Permission
My github sources
yay,i'm the first. at last your thread. kudos to you man.
Yeah !
Good
So what's the difference between this and doomsdays rom/build?
So what have you changed? Comparing to doomnexus?:d
Not Truly Evil said:
So what's the difference between this and doomsdays rom/build?
Click to expand...
Click to collapse
Kernel 3.0.48 and working Vocal Search Google Now. GPS is also directly working.
THANKS !!!!:good::good::good::good:
Awesome!!!
Wow nice It's based on ivendor/arcos work?
How is the 3.x kernel atm? Is it better then the 2.6.x (battery, smoothness etc)?
Edit: And how about gapps? Can I use the same as for doomsdays build?
3.x.x kernel its fully working now?no bugs?
Testing it right now! I'm making a review in about 5 minutes!
Downloading and flashing!!! And ofcourse testing!
It looks very promising!
Installing now!
uNb0rN1 said:
3.x.x kernel its fully working now?no bugs?
Click to expand...
Click to collapse
Just Camera which is not working. But performances are very good with 3.0.47
Can I use the GAPPS from DoomNexus?
Just wondering!
Le wild problem appears: when i lock the screen, then unlock it, the screen is black and i need to restart.. Also the screen animation and the brightnes are not working! Btw: is veery smooth!! Nice job!
mrjraider said:
Can I use the GAPPS from DoomNexus?
Just wondering!
Click to expand...
Click to collapse
Yes if its JB gapps
camcory said:
Yes if its JB gapps
Click to expand...
Click to collapse
Yes it is
Thank you..
Just this gapps : http://goo.im/gapps/gapps-jb-20121011-signed.zip
cezaralboiu said:
Le wild problem appears: when i lock the screen, then unlock it, the screen is black and i need to restart.. Also the screen animation is not working! Btw: is veery smooth!! Nice job!
Click to expand...
Click to collapse
Sorry I forgot to add liblights Flash this in CWM.
Okay first impression:
- AWESOME!
At the beginning the launcher is a bit laggy but after some seconds its as smooth as butter
Bugs:
- Weird animation off (some weird stripes across my screen)
- after unlock an dark and not lighted screen
- no camera (but we know that)
I need to test a bit more but I dont have the time atm..

[JB+] CM10.2 Android 4.3 for the Defy(+)

Android 4.3 Jellybean for Defy and Defy+
Gapps: http://forum.xda-developers.com/showthread.php?t=2296931
Download Link: http://quarx2k.ru/cm10.2-nightly-defy+/
Mirror: http://d-h.st/users/Quarx/?fld_id=22062#files
http://defy.bytekiste.de/
Version for Motorola Bravo: http://quarx2k.ru/cm10.2-nightly-bravo(kobe)/ + mirror http://d-h.st/users/Quarx/?fld_id=22063#files
Problems
30.07.13: First Build. Works almost all.
01.08.13: Fix "Unknown" bug. Fix 1% battery. Dialer included, VideoEditor removed.. Backup gapps disabled(to prevent reboots during install rom).
17.09.13: Focal Restored, Ability to OC GPU(without gui yet), added patch for Data, DefyParts, 720p rec(bugged), Support HWUI app, Minimum brightness 2, Wide poho added.
20.10.13:720p rec, Fix HWUI app, use thoemy wpa_supplicant, Call Recording, LTO support, many fixes and improvements in kernel, gpu 266mhz by default, Fix arrows that indicate upload/download activitiy at Wifi and mobile connections.
30.10.13: Fixes in kernel, Added two new options for ril "emptycallchanges" and"skipdatareg" (disabled by default), journal on ext enabled by default, fix reboots in recovery(not tested), updated twrp.
BT headset not fixed
GPU Freqs:
266666666 = 266mhz OCed.
200000000
133333333
100000000
66666666
33333333
16666666
echo %freq% > /proc/gpu/max_rate
3.0.8 kernel Project:
USB, Wifi, BT, Sound(Only speaker), GPS, Phone(ussd/sms/data), Full HW Video decoder(720p also), initial OTG support.
TODO:
1. Improove sound lib (support headset, bt-headset, in-call sound etc)
2. Improove stablity of kernel().
3. Need check voltage formula for cpu
4. Add camera drivers, (from moto or opensource driver?)
5. Fix otg.
6. Fix proximity sensor(cause reboots)
Screenshots
Test Builds
Click to expand...
Click to collapse
If you liked this project, you can donate
Donate to Quarx
PayPal: [email protected]
---------------------------------------
Donate to Blechd0se
PayPal: [email protected]
Click to expand...
Click to collapse
F.A.Q
Thanks Quarx!
Which gapps should we use? At goo.im aren't gapps for 4.3
Gesendet von meinem MB526 mit Tapatalk 2
I don't see any official nightlies or betas/alphas CM10.2 for even Nexus 4...but we already have a build? Hah who needs official! And no gapps it seems, I'll see if I can get it from the stock dump somewhere..
Okay Nexus 4 has an unofficial CM10.2 too, here.
Also gapps for 4.3, this might work for now?
EDIT: Okay slimmed it down from some 170MB down to around 19MB as it now replaces the keyboard in the ROM with one where swipe works without crashing it. Once the ROM's keyboard is fixed my gapps can go back down to around 9MB here
WoW, it really comes!! Thanks very much!!
its the same gapps at 4.2.2 ?
Thanks
So it begins... downloading now! Will report soon. Thanks again Quarx, you seriously rock.
Great! So, if the are no new hard to fix bugs, I hope that Bluetooth can be eventually fixed so I can move from cm10.
Sent from my Nexus 7 using xda app-developers app
STATUS 0 Installation aborted ..
what problem might be ??
m installing with cwm.
Shubhamqweasd said:
STATUS 0 Installation aborted ..
what problem might be ??
m installing with cwm.
Click to expand...
Click to collapse
Old CWM not support new update-binary.
Only CWM 6.x or TWRP works
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
By the way, I took a look at the size, it's 184MB for this nightly, quite big for our limited system partition. We started having problems with cm10.1 already having to resort to minimal gapps, to successfully install cm10.2 plus gapps (when gapps are officially released) will require a considerable butchering of the .zip.
Sent from my Nexus 7 using xda app-developers app
@Kayant, Focal camera included. Don't know about conflict.
@ccav2000, By default it's 192mb, i removed some video files in media. in next builds i'll try reduce size of build.
Kayant said:
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
Click to expand...
Click to collapse
Hmm yeah, but looks like mine is the minimal version as usual
But I'll download this first to make sure we don't miss anything. Then I'll see if I can make a proper defy worthy minimal version...
Looks like I ran out of thanks to give out for today just before Quarx opened this thread, and my defy is in a limbo testing SB so can't use the xda app -_-
Kayant said:
To add to @TJKV Gapps suggestion
Another one here ---> http://forum.xda-developers.com/showthread.php?t=2378992
@Quarx is the new Focal camera included?? Would it conflict with the Camera in the Gapps package?
Click to expand...
Click to collapse
Focal is included, I can see it among other apks in the /app/ folder Haven't tested it just yet, though, will flash soon!
Quarx, thank you! For keeping the DEFY updated for such a long time... Thank you, thank you, thank you! :victory:
Quarx said:
Old CWM not support new update-binary.
Only CWM 6.x or TWRP works
Click to expand...
Click to collapse
flashed with twrp , rebooted in middle of flash ..
had to flash sbf again , agn flashed with twrp and again it rebooted in middle of a flash ...
now again flashing sbf
man i hate twrp recovery ...
is there any cwm 6.x for defy ??
This guy is just awesome! hahaha
No limits for defy, thanks @Quarx
@Shubhamqweasd
this comes with the new CWM flash this with an old one or TWRP
(touchbootmenuV2.0beta_multibootV0.8-20120829-signed.zip)
http://forum.xda-developers.com/showthread.php?p=19737327
Shubhamqweasd said:
flashed with twrp , rebooted in middle of flash ..
had to flash sbf again , agn flashed with twrp and again it rebooted in middle of a flash ...
now again flashing sbf
man i hate twrp recovery ...
is there any cwm 6.x for defy ??
Click to expand...
Click to collapse
When you enter TWRP, wait a while before you do anything :laugh: Go through the menus a bit and if it doesn't reboot in ~20secs it most likely won't reboot until you tell it to That's my strategy with TWRP, at least, and it serves me well that way
Can I install 4.3 without factory reset/data wipe over 4.2.2 (Quarx's CM10.1 July 9 build?)
Before anyone sneers at me for being a n00b, let me hasten to clarify that I did install 10.1 - when it first came out - over CM 10 without a factory reset and my Defy managed to work fine from then to now (in fact I had a lot fewer problems than most people who were reporting).
What is more, a few days ago when I decided to factory wipe and install one of the July builds afresh, I ran into so many problems that I had to restore a nandroid backup and go back to my non-factory-wiped state.
So, can I? Has anyone done it?
Oh, and Quarx, you defy belief, man.

[ROM™ 5.0][SINGLE] NeXus Experience ROM 1.0 - CM12 Based - [27th November]

Some Features​
This is built from CM12 Sources
[/CODE]
=================================================================================================
How to install
- Requires Unlocked Bootloader, CWM/TWRP
1) Place ROM & Gapps ZIPs to your SDCard;
2) Reboot in Recovery Mode;
4) Do a Wipe Dalvik Cache/Data/Cache/System;
5) Flash NXROM zip and NXGapps zip;
6) Reboot System;
The first boot can take up to 5 minutes!!
How to install a new RELEASE
Just Reboot in Recovery Mode and Flash the ROM without WIPES.
Version Information
Based on: CM12
Works only on GPE. Convert to GPE PLEASE!!!
Release 1.0 Changelog - 27th November [Link]
- Initial release
- Only Single SIM works. To install it, convert your device to GPE before flash
- Latest CM12 commits (11-27)
Reported Bugs 1.0 - Same CM12 issues!
- Tell me plss if u find another issue!!
=================================================================================================
Downloads ROM & GAPPS
All files to download and the Changelog are in ROM Page now!
If u like, u can use any other Gapps.
NX ROM Source
NX Kernel Source
=================================================================================================
If u like this work, make a donation to Anderson Aragão plss!!:laugh:
=================================================================================================​Thx for downloading guys and if you like this, press Thanks! :good:​
Thanks for the rom. BTW does it work with xt1033 dual Sim?
casshern94 said:
Thanks for the rom. BTW does it work with xt1033 dual Sim?
Click to expand...
Click to collapse
look at the screenshots. there is dual sim icons on status bar.
Sent from my XT1033 using Tapatalk.
Oh! Sorry.
Gonna try out: )
which boot/kernel recommend ?
looks great .it almost have all features of crdroid downloading now..
this rom is really really awesome job well done .. downloading . . . . . i hope this thread will updated weekly for more updates coming
Looks really nice! Any specific instructions on flashing? I'm on Stock 4.4.2
-sent from my little moto beast
downloaded .. flashing error . stuck on boot animation .. xt1033 variant ..
EDIT :
2mins boot time sorry .. its working fine now
Looks good however:
after semi dirty flash (your script wont work without boot prop so factory reset only) both sims dont work
- wifi isnt working
- boot animation is still moto
- gapps are there but wallpapers missing
- setup wizard is beggered (skip button doesnt work in fiwi set up, need to back out)
So still a bit of work to do it seems (for the 33 variant/me at least)...
Could i be doing something wrong? i just have twrp/stock. Factory reset, then flash rom. Then flashing cm11 addon. Looks like im doing it just fine.
could we use minigapps ?
Awesome work Man
hassan_eldhraawy said:
could we use minigapps ?
Click to expand...
Click to collapse
yep, u can:good:
Download links not working for me. When i click on them it says webpage not available!! (on PC using Chrome) . Problem with mega?
EDIT: after installing mega app extension it's not downloading.
EDIT2: fine. its working on mobile. some problem with mega i think.
i can't see link download ?
re up plz!!
thank
shinsangwoo26 said:
i can't see link download ?
re up plz!!
thank
Click to expand...
Click to collapse
http://n5x.mobi/motog/
first of all.. please give link to n5x gapps... i only found package with rom+gapps..not gapps alone
1. both halo and hover not working for me
every other things seems working till now
I did like to use a special kernel with my Moto G.
Kernel: http://forum.xda-developers.com/showthread.php?t=2786336
The kernel needs these commits:
https://github.com/TheMuppets/propr...mmit/02f25b73a8bba07085f51bc817369ff71241eed2
https://github.com/TheMuppets/propr...mmit/c641edba2ec793a3331ab35b455316b3b4590156
https://github.com/CyanogenMod/andr...mmit/2fea05c7a9ed37b1d8bda7da8afe4cafaab8ddb3
Can you add these commits for Moto G please?
And resync the cm repo, it needs to be 07/02 or later
gentle reminder,this rom runs with ART on default,so the boot time might be long at first,but it boots
I have xt1034, and I don't get any data. Tried using another kernel as well but that didn't work either. Any ideas?

[ROM][5.0.2][20150306][SaberMod][N7100] CM12 Unofficial Build [BETA] need testers!

Welcome to wilson3q's CM12 Unoffical Build!
I don't own a n7100, please help to test.
Disclaimer: I take no responsibility for bad things that happen as a result of flashing this.
All are pretty standard cm12 stuffs, except those patches I applied on top of them.
[Download]
ROM (please don't mirror)
build - 20150306
Gapp:
http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
Recommended launcher:
Nova Launcher (really like its JB zoom app animation, hate L slide up animation)
Recommended theme:
Deep Darkness
[Flashing Guide]
1. Reboot to CWM/TWRP recovery
2. Flash ROM zip file
3. Flash Gapps
4. Reboot
* Wipe data first if you come from another rom *
* Newer boot loader, modem and recovery is highly recommended (don't use twrp 2.8.4, use 2.8.1 instead) *
* No other kernel will be supported, use the stock one, for your best experiences too *
[Patches]
My additional patches over cm12 includes:
Enhancements and bug fixes cherry-picked from other ROMs, including Slim LP, Nameless, LiquidSmooth
SaberMod for ROM and kernel
O3, JustArchi optimization
Added Boeffla sound engine 1.67 (Get Boeffla Sound app to enable)
Added CPU governor zzmoove, smartassv2, savagedzen
Video playback forward/backward fix
Removed all kernel debuging stuffs
Fixed keyboard not showing up during setup wizard
Fixed Camera issue
Fixed Day Dream
Fixed Netflix streaming (one more reboot needed after installation of Netflix)
Fixed audio
Enabled Multi-user
LMK minfree tweaks
Misc tweaks
Changed DPI to 280
more...
For better experience, change Nova animation/scroll speed to Fast...
[Known Bugs]
I am not sure what issues you will get, but one thing is for sure: YOUR PHONE WILL FLY!
chrome glitch: type chrome://flags as URL and disable GPU thank @bigmarv31)
Thank cm team for the amazing ROM.
Special thanks to: @DerTeufel1980, @sbrissen, @rogersb11, @TheBr0ken...
Please help to test if baseband issue is fixed or not...
Thanks
Welcome on board mate
Awesome buddy one more flawless rom for our device....gr8 @wilson3q
Great news! I can't wait to try it! Thanks
20150227 build does not boot
mimmo13 said:
20150227 build does not boot
Click to expand...
Click to collapse
Clean install?
Logcat...plz.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Clean install.... bootloop...
@wilson3q after note 2 logo, i have black screen and after 2/3 mins, the phone reboots.
Sorry , but i'm not able to do a logcat.
wilson3q said:
Clean install?
Logcat...plz.
Click to expand...
Click to collapse
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Welcome on board !
Please tell us call recorder could works and loud with this rom !
KNIGHT97 said:
Disable selinux, in kernel and make the trees permissive, refer to nameless git for the same. You kernel is crashing at boot, that's why logcat, dmesg or a kmsg is a no go.
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Click to expand...
Click to collapse
Already disabled..
Hard If no Logcat...
Can u try to use another kernel? See if any other issues...
I will look at the kernel again..
I tried with purecm and it seems to boot.
Edit: No Baseband
NisseCool said:
I tried with purecm and it seems to boot.
Edit: No Baseband
Click to expand...
Click to collapse
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Okay
New build up...
Try to see if can boot...
wilson3q said:
New build up...
Try to see if can boot...
Click to expand...
Click to collapse
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
NisseCool said:
It does boot.
nvm. It starts rebooting after it gets to setup wizard.
Click to expand...
Click to collapse
Logcat?
Yannn said:
Welcome on board !
Please tell us call recorder could works and loud with this rom !
Click to expand...
Click to collapse
Not sure...I don't have a device to try.
thanks man! i'm gonna try it!
---------- Post added at 01:12 AM ---------- Previous post was at 01:05 AM ----------
[email protected] said:
Ohh then dwnld and flash one from Androidwizzards thread...u will get BB working
Click to expand...
Click to collapse
I have no baseband too.
Where i can find Androidwizard thread?

Experimental Moto Z Play. Kernel for 7.1.1. Stock.

Experimental Moto Z Play. Stock.
Motorola source NDN26.118-23-12
Features
+f2fs fix
+safetynet
+crc
+sio, fiops, zen, bfq, maple
maple - default
+adrenoboost msm_adreno_tz
+fsync on/off
+kcal
+vibration adjustment
+net/wireguard
+Fingerprint as Home
+sweep2sleep
+Block Wakelock
+modules greybus
module wifi
+etc.
Installation
+ Flash in twrp recovery
For settings use EX Kernel Manager.
Credits
flar2
Test
I tested in my moto z play RR Remix last rom version and stock in boot, so the kernel its not compatible with cm ?
omar4069 said:
I tested in my moto z play RR Remix last rom version and stock in boot, so the kernel its not compatible with cm ?
Click to expand...
Click to collapse
It's already said in OP, it's for stock ...
Imagine the time saved if people were to read and think first.
ive installed this kernel on my prerooted stock N rom so far everything good safetynet pass and modules can be installed fine.
Thanks, trying now
thanks for work.
Fingerprint as Home can not work
zq6559636 said:
thanks for work.
Fingerprint as Home can not work
Click to expand...
Click to collapse
ExKernel Manager
OMG thanks a million bro finally my camera issues are gone you are a life saver
Hi, is possible to add front notification LED ? Thank you,
Amazing kernel ! works like a charm without any issues
Hi,
Is it mandatory to use EX Kernel Manager or i can use some other app for changing settings ?
THanks
it is recommended to use ex kernel manager
Other programs can also be done if there are enough settings.
This kernel analog is an elementalx for which the ex kernel manager was created.
Anyone try applying this patch to the November patched NDN26.118?
Yes, flashed it and afterwards magisk 16.0. Magisk said it is not installed. Installed it again and it said again it is not installed...tried some times to install magisk via twrp, it always showed up as not installed, so reflashed my nand I took before.
Can you please make the same kernel for 8.0 Oreo?
Please update the download link sir. It seems like there is a 410 error while clicking the link. I am a Moto Z Play user currently running 7.1.1 with Magisk. Safetynet is working and root is proper. But the modules return a merge error and after going through several forums here, I have come to the conclusion that the f2fs bug fix zip helps to get rid of the problem, but it didn't help me. I hope that this kernel helps me to fix that issue.
PS: I had messaged the thread owner about the link error but there hasn't been a solid reply from him since 36 hours. If there are members here that do have the zip file of this kernel in their system then please be kind enough to mail it to me at [email protected] Do DM me here after the zip has been sent. Thanks in advance.

Categories

Resources