Related
So, this is what has happened so far:
I googled for a small and easy to follow guide to unlock my phone so that I can later on install a custom rom. I followed the steps provided here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
What I didn't notice on the first place was the "UPDATE: DO NOT FOLLOW THIS GUIDE INSTEAD Please see new root method which works on all Nexus S and Nexus S 4G!" link. Don't ask why - really don't know.
The result was having my Nexus S stuck on a screen that shows Google logo on the middle and an unlocked padlock on the bottom.
It seemed, or to be exact, I figured out that, the problem was the .img file mentioned on some point in the middle of this.. tutorial.
So, I decided to follow the newer guide that can be found here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Although all went well (didn't have to go all over the same processes up to the .img installatin point), I ended up with the same screen that shows Google logo on the middle and an unlocked padlock on the bottom.
I figured out that I could just install a rom at this point, and decided that I should go back to stock. So, I followed this guide here:
http://nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023/
But, when I choose to install the .zip file, I get this error:
assert failed: "getprop ("ro.product.device") == "crespo" || "getprop ("ro.product.device") == "crespo"
E: Error in /sdcard/i9020t_i9023.zip
(status 7)
Installation aborded
..let me add to this point that I have bought my Nexus S from EU, it is an i9023. Let me also add that all I wanted is to flash an ICS rom and I think I have ended with a f****d device I don't know what to do with!
Any help, really, would be so much appreciated since I need to use this phone. I have a backup for calls etc but I need some smartphone features!
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
nickmv said:
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
Click to expand...
Click to collapse
Yes, I can enter this menu - there already. My model is an i9023GSM.
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
nickmv said:
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
Click to expand...
Click to collapse
You gave me the good news so, thank you for that. Now, I should follow this guide and come back in case I have a problem.
As far as the rom, I wanted to flash an ICS since I cannot wait any longer for Google to release the official update. But right now, anything that can get my device up and running would be really good!
Edit: nvm. >_<
kijp15 said:
Why don't you just use shabby's one click root. Simple & much easier. Saves all sorts of troubles.
Click to expand...
Click to collapse
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
nickmv said:
but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
Click to expand...
Click to collapse
OK, stuck already. On Part 2 what I understand is that I have to open the CMD and copy-paste the path to the "tools" folder? Because this is what I do, and after - since this is what I have understand - I type "fastboot oem unlock" and I get "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
What do I do wrong?
EDIT:
Tottaly stuck on Part 2. It seems that there is no fastboot.exe file inside "tools" folder. I don't think the problem is something else - I'm sure I give the right commands since I tryied for fun another folder I have with fastboot.exe inside and it worked - to be exact it just gave me a FAILED messsage since device is already unlocked. Plus, regarding Part 3, Step 1, the first file for download is missing so I used the second link and downloaded 5023-cyan file. Hope this was a right move to do.
EDIT 2:
Ok, here is the story so far: I followed the guide given step by step. The USB drivers has been installed correctly so the device can be connected to the PC.
In the "tools" folder there was no such fastboot.exe file so I manually added one that I've found on the newer guide given on the 1st post. The unlocking process is failing because the device is already unlocked.
I did manage to install after this, the 5023-cyan.img file since this is the only link working from Part 3, Step 1. This gone well too!
Now, I couldn't go on with Part 4, I mean, I could not install the .zip file as it describes so through recovery mode I installed the .zip file succesfully (confirmation message to Nexus S screen).
I reboot and still get the same Google logo on the middle and an unlocked padlock on the bottom.
I cannot understand what I do so wrong? Oh, I'm so disappointed..
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
http://forum.xda-developers.com/showthread.php?t=1063664 or use ROM manager and select Stock ROM (you should then receive OTA upgrades to 2.3.6).
On the latter: You colud just back up different ROMs and switch between them using CW.
skatastamoutrasas said:
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
Click to expand...
Click to collapse
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
mixtapes08 said:
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
Click to expand...
Click to collapse
Can you give me a CM9 kangs link since as new here, I'm kinda lost?
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
skatastamoutrasas said:
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
Click to expand...
Click to collapse
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
kijp15 said:
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
Click to expand...
Click to collapse
Worked just fine! Thank you!
skatastamoutrasas said:
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
Click to expand...
Click to collapse
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
nickmv said:
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
Click to expand...
Click to collapse
It did worth the hassle, that's for sure. Now I think it's so easy to unlock a Nexus plus I now have a little more knowledge regarding Android .
I will stick with CM 2.3.7 as it looks just fine. I don't care about warranty, I don't think I will ever need the official service for a software issue. Now I have to re-install my apps, re-sync my accounts and setup the phone the way I want it. It will take a little more time.
But I'm glad that I pulled this through - with your help of course! Guys, you rock!
I wish that I'll be as helpful as you at the near future.
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
MAKE SURE THAT YOU HAVE CLOCKWORKMOD PERMANENTLY INSTALLED BEFORE DOING THIS. It saves time if you mess up. Also, make sure you get the latest gapps HERE
Instructions:
1. Go to clockwork recovery
2. Select data/factory reset/wipe
3. Select clear cache as well
4. Adv Mounts and Storage > wipe /system (note, this wipes android off the phone. It's a good idea since youre going from ver 2.x to 4.x)
5. Choose "flash from zip" (or whatever it's called.....NOT flash from update.zip)
6. Flash the cm9 update file first, then flash the kernel of your choice, then flash the gapps file.
7. Back out of the menu and select reboot.
Take note though, that the new ICS OS has incompatibilities with certain apps while GPU rendering is turned on, etc. It'll prob reboot on you sometimes, etc. For the most part it's stable, but that's completely subjective.
If you do run ICS, make sure you turn on GPU rendering in Dev Options. It takes full advantage of the GPU for UI animations, etc. Sometimes there's a stray app here and there that doesnt play nice, and you'll notice if the window looks really tiny or funny. Turning it off will fix the problem.
nickmv said:
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
Click to expand...
Click to collapse
Two questions:
The link you give me to download the ICS rom keeps loading for ever. So, I choosed this one instead:
http://forum.xda-developers.com/showthread.php?t=1356228
Right or wrong thing to do?
It it essential to install a custom kernel? I ask because I forgot to copy/paste the .zip file and due to lack of time, I procceded without it, installing the ROM and G-APPS.
I am preparing to root my Verizon GS3. The process looks pretty simple, but I still have a few questions I would like to have cleared up first just to make sure everything goes to plan.
I have downloaded the following files as instructed to in one of the threads on how to ROOT the GS3:
- USB Drivers
- Odin (unzipped with Winzip)
- Stock rooted system image (mirror link)
- CWM
My first question is whether or not I am supposed to unzip the stock rooted system image. The post says I should have a file named "rooted.system.img.tar" to select in the PDA section of ODIN, but the name of the file I have is just "rooted.system.img."
The second question I have is which custom recovery should I choose? I downloaded both, but don't know if one is better than the other or if it just comes down to personal preference. Also, do I need to unzip either one of those files? And if I choose not to push a recovery now, can I push it later if needed to flash a new ROM that I like. I ask this because the only real reason I want to root right now is to disable the ridiculous wifi notification in the notification bar and the pop up that you get when opening a "high data usage application."
Another concern I have is returning to stock. On my DROID X2, all I had to do was use RSD Lite and flash back to stock. I have downloaded the stock kernel and stock ROM off of one of the threads on here (I can't find it for some reason), but was just wondering how I would go about using that to get back to the way it was out of the box.
Thanks for the help!
Edit: As far as the first question goes, I selected the rooted.system.img in ODIN and it shows it as rooted.system.image.tar at the end, so I'm guessing no unzipping for that file is necessary, correct?
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
manchild83 said:
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
Click to expand...
Click to collapse
Sorry for the late reply. I went out to eat with the fam.
Thanks for clearing that stuff up for me! Can't wait to root my GS3 in 7 days after my return policy is used up!
Thanks again!
You're welcome good luck with the phone.
Down with Verizon for locking my bootloader
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
DROIDLOVERX2 said:
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
Click to expand...
Click to collapse
I'd follow this to root. Don't need to do anything else but what it says there.
EDIT:
SOLVED! Thanks for the support!
In the end I decided to flash back to stock factory image from Google downloaded at the following link (https://developers.google.com/android/nexus/images) and installed using the very easy method of inputting a single command. Exactly the kind of solution I needed after pulling hair out.
Hopefully this post is of assistance to others in need.
In the end I used the Chain Fire auto root. Worked a treat - so now running stock Nexus 5 image with root, just the way I wanted it.
http://forum.xda-developers.com/showthread.php?t=2507211
Original question:
Need help - I think I bricked my Nexus 5 (was running KOT49H stock ROM). And would really appreciate some sage advice now to get me out of trouble.
Not my first root, custom ROM experience - have done on 3 previous devices, but first Nexus 5 and first stuff up for me. Not a complete noob, but please be clear in your advice. Thanks.
I "followed" this guide (http://www.teamandroid.com/2013/12/10/root-nexus-5-android-442-kot49h-kitkat-install-cwm-recovery/2/)
However, at Step 13-15 I was unable to mount an SD card (Nexus 5 is all internal), and I then opted to sideload the UPDATE-SuperSU-v1.80.zip file using "adb sideload". It is now stuck in a boot animation loop (say 10mins of waiting?). So what has gone wrong here?
I also guides from the same site to unlock bootloader and install CWM - that all worked.
I am able to get back to the bootloader and can get into CWM still, just cannot boot.
Not sure if my phone is charging, but I believe I still have some juice so looking for a solution. Have I somehow replaced all of the ROM software with just the SuperSU file? Is that possible? This is my first outing with the Nexus 5 but I have rooted and custom ROMed many phones before, but this is my first with no external SD card.
I could not mount any / partition from what I could tell.... such as /data (not sure if this helps your advice?)
In another thread, someone mentioned a catch all solution might be this : http://forum.xda-developers.com/showthread.php?t=2513701
As I said, I can get into the bootloader and CWM and phone is still recognised by PC.
If I am not mistaken, this would basically sideload everything back to factory?
Would this matter if my phone was at KOT49H before everything went wrong, or will that just come down via OTA later anyway (I was getting OTA updates just fine).
I think I should still have about 50% battery charge, but I don't know if it is charging (nothing shows) and the battery is completely internal on these.
Your help = much appreciated! Please - its Christmas afterall...
Cheers Adriaan
Sorry to hear about your troubles! I know how frustrating it can be when you softbrick for no apparent reason. However, the fact the phone still boots into recovery and all that means that there shouldn't be anything we can't recover from. The link you provided would work. You might also check out one of the toolkits that helps automate most of the stuff you are looking for, like this: http://forum.xda-developers.com/showthread.php?t=2525026 .
That being said, me personally, I would attempt some fixes via CWM first (though I much prefer TWRP). It could be something as simple as wiping the caches and fixing permissions. Possibly a factory reset could help, though I suspect probably not at this stage. Are you comfortable with manual ADB and fastboot commands? I would download a rom zip and adb push it to /sdcard, perform resets and reboot. Should be fine at that point and rooted to boot. If you're all about the stock root experience (never really understood that, but to each their own ) then try this: http://forum.xda-developers.com/showthread.php?t=2557523
Once you would download that, and are able to get ADB access in recovery (should work if you have the right drivers and all - if not, would recommend switching to TWRP) then you would use this command:
adb push rom.zip /sdcard/ - where rom.zip is the name of whatever that one downloads as...
Then wipe factory reset and caches (system too if you want to be thorough) then install the rom and reboot. Should be back to where you want.
If you would like some more 1 on 1 type help, feel free to hit me up on Hangouts with this username. Good luck!
You can flash the factory images directly from Google which should get you back up and running again.
Download and extract them.
Boot your phone to the bootloader and plug into your PC.
Run the flashall.bat
Note that this will fully wipe your phone
Sent from my Nexus 4 using xda app-developers app
First reboot recovery and factory reset the phone. If it boots your good. If not install the google factory image.
Everyone, thank you for your input. My phone is back alive and well.
In the end, I decided to flash all back to a stock factory image from Google. Only had 1% battery left by the time it booted into the fresh flash. Figured this was the best place to recommence my efforts to gain root again, and hopefully this time with a better outcome.
I will probably give the chain fire auto method a shot this time, after a bit more research.
Thank you again for your help and for the very quick responses. Great community.
In the end I used the Chain Fire auto root. Worked a treat - so now running stock Nexus 5 image with root, just the way I wanted it.
http://forum.xda-developers.com/showthread.php?t=2507211
So, I did a stupid thing this morning. I spent the last, probably, five hours backing up all of my apps and data from my TF300, and once that was all done, I wiped the data on my tablet. "What makes that stupid?" What makes that stupid is, it was a miracle that I ever actually managed to root this thing in the first place, and now, I don't know a) if it's still rooted (I doubt it), and b) if I'm even mentally capable of rooting it again (I doubt it).
So, here's my situation, and if someone could just dumb down the steps for me and point me in the right direction, that's all I need. I got my tablet, I don't know, probably early 2012. I can tell you that the tablet is on ICS 4.0.3, and the build number is 9.4.3.29-20120511. It's also unlocked, I don't know if that needed to be mentioned. Now, things are better since I wiped the data on this mother, but ICS, on this tablet in particular, is slow as balls, and I'm done with it, I want KitKat. But I am so far beyond lost after what I did that if I try to work my own way out of it, I'm going to brick this thing.
I wiped the data because I was trying to do something involving the Fastboot menu or something like that. Whenever I selected the USB icon and hit up on the volume strip, the tablet just locks cold. I figured whatever caused that, would probably go away with a data wipe. It didn't. So now my data's gone, my apps are gone, my tablet's not rooted anymore, I have no idea how to get to KitKat, I can't sleep at night, it burns when I pee... let's focus on the tablet stuff for now, I'm signed up to some forums for the other stuff.
I know most of the people that read this topic will be inclined to say, "You're an idiot, read this, this, and this, and take care of it yourself." I know I'm Androidiot, and I'm humbly asking for help. Again, I'm just petrified of following the wrong topic and ruining the whole thing, so if someone could tell me how I'd go about upgrading my tablet from stock ICS to KitKat, I'd appreciate the hell out of it.
Just a little bump, not too big... no love for Tim?
Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2
zlazaar said:
Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2
Click to expand...
Click to collapse
Thank you, Zlazaar!
Well, it seems that after my device was wiped, it still didn't remove CWM as a bootloader or whatever, I don't know what I'm saying. When I hold down the power and volume down buttons, I could wait like ten seconds for fastboot, or I could tap vol up to enter the "RCK" menu. I don't know what that means. But I go into it, and I'm at the CWM menu, I think it was 5.5.0.4. You probably know better than me if I need to do anything further than that with CWM, but I should be good on that, right?
I'm almost going to go to the sites that you mentioned to download files and get more information on how to use it all. I appreciate your help, because without it, I'm sitting on an unrooted stock ROM with only most of my apps, because oh yeah, like 70 apps forgot to transfer with that backup I did... so, whoopee.
Thank you again, buddy!
The goal is kitkat, right ?
So, in order to get it you need 2 important things :
1- The latest bootloader, yours can't handle kitkat.
2- a custom recovery supporting kitkat, i.e i'm using TWRP 2.7.1.0 (link in my signature), your CWM is outdated.
The only way i know to update the bootloader is to flash Stock ROM via fastboot as described in tutorial.
I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol
Here is the driver : Universal Naked Driver
After install, you can use fastboot and complet other steps.
Tim 13 said:
I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol
Click to expand...
Click to collapse
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck
b..c said:
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck
Click to expand...
Click to collapse
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!
Tim 13 said:
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!
Click to expand...
Click to collapse
Hi Tim13,
I'm glad to hear that everything went well and my guide helped you!:good: And to answer your question flashing doesn't wipe your data. You have to manually wipe it. And lol:laugh::good: that you didn't kill your tab. I hope you find your tab faster and useful again!
It's just as slow and useless as it was. But honestly, the flashing process was fun, and I learned from it. Plus, TWRP and Cyanogen mod are awesome, and now I know that. lol
Great to see you up and running @Tim 13 :good:
Can you add SOLVED to the thread title
Thx Josh
No, I'm not gonna do that.
I'm just kidding. You're all right, darling. :good:
Edit: Actually, not being a douche, I can't figure out how to edit the thread title. I went to edit the first post and I can't change the title of the post... I'm gonna look around for how to do it a bit more but after that I'm gonna go to bed.
DOUBLE EDIT: Got it, as you can see. Thanks to all that helped out!
Just picked this up for the significant other's bday. Bootloader unlocked it with the instructions from @ipdev, and can report that method works. Can't get root.
Does anyone have this device and have achieved root? I'm a bit perplexed, even flashing a patched boot img isn't getting Magisk on there the way that it should.
Thanks!
Important to Note that the 460 has the exact same EVERYTHING as the 450, including build #s. They just gave it double the internal space is the only difference I've seen.
UPDATE: Just bricked the lil' guy. Since the device is encrypted with every system file having a -sign behind it, I went and frolicked around trying to get Magisk on there via ADB. The only way to do that was to patch the boot-sign .img and since I got the new Magisk, I let it patch, flashed, and now voila, nothing but a bootloop. Off to DM Verity my way out of it lol.
Articul8Madness said:
Just picked this up for the significant other's bday. Bootloader unlocked it with the instructions from @ipdev, and can report that method works. Can't get root.
Does anyone have this device and have achieved root? I'm a bit perplexed, even flashing a patched boot img isn't getting Magisk on there the way that it should.
Thanks!
Important to Note that the 460 has the exact same EVERYTHING as the 450, including build #s. They just gave it double the internal space is the only difference I've seen.
UPDATE: Just bricked the lil' guy. Since the device is encrypted with every system file having a -sign behind it, I went and frolicked around trying to get Magisk on there via ADB. The only way to do that was to patch the boot-sign .img and since I got the new Magisk, I let it patch, flashed, and now voila, nothing but a bootloop. Off to DM Verity my way out of it lol.
Click to expand...
Click to collapse
If it is close enough to 450, and you can get into fastboot, you can try and boot the linked boot.img
fastboot boot m19_ST16C7BNv205.img
Same modifications I had to use to get the first boot image I found to work with BNTV450.
avb, mtk type and signature removed.
Also patched with Magisk 19 (canary release)
For good measure.
https://drive.google.com/open?id=1LgtB2JKCKwLJ64mUlij5Cb_cJrBi8Av1
PS.
Tested above modified v2.0.5 boot.img on BNTV450 running v1.0.2, so it should work on BN v1.0.2 and up.
Good Luck.
Cheers.
PPS.
Just ordered one. (Should show up in 2-3 days.)
Hey @ipdev make sure you get the insurance for 2 years. Shouldn't be more than 6-8 bucks. You're going to need it.
I went ahead and tried all the versions that you posted on your OP for flashing; only one was successful - the rest softbricked on the flash. When I went back and flashed the 460 stock on it, it was a different stock and never did run back right - kept getting the blinking red border ring and unfortunately lost the serial #, flash, and every possible entry on the "About Nook" tab - essentially glitching it out. Since I''d only had it for 12 hours, I took it back and swapped it out for a fresh one
So the issues I'm seeing so far are:
1. It's encrypted and says as such - this is what is causing the probs later in flashing and you can't deactivate it from what I see so far without a custom recovery.
2. Patching the boo img via MagiskManager will softbrick it, and I tried with both 18 & 19 inase there were issues with one over another.
3. The device will try to auto update ASAP OTA so make sure you don't connect it to the internet before you disable that function.
4. There is no "official firmware" you can download - B&N will only let you direct download the firmware through notifications. Granted, if you want the only one I was able to find I can post it (it says its Oreo 8.1.0 but it looks different than what comes on the device and its running a crappy Android Go)
5. Its easy to unlock the bootloader per your instructions but after you get the Orange State it takes an awful long time for basic boot (which is more of a personal irritant than a problem, lol)
6. If you patch and flash the boot img with Magisk, you will completely lose the screen. Keep in mind though, if you plug it into the computer you will keep hearing the connect/disconnect chimes. It will keep doing that and neither adb or fastboot will function (even though you can fastboot devices command and it will show a Daemon output).
7. Booting into recovery becomes harder and harder from adb and fastboot once you unlock the bootloader - pressing volume rocker and power does not do it at all.
I'll try your new files and see what happens...I think the guy got a hell of a lot of potential and needs a nice streamlined rom or at the very least root to get the bloat off so its faster. But I think it says something on its crippled nature when the guys at B&N say it ain't worth it in the long run - apparently they aren't as great as even the nook HD line.
Articul8Madness said:
Hey @ipdev make sure you get the insurance for 2 years. Shouldn't be more than 6-8 bucks. You're going to need it.
I went ahead and tried all the versions that you posted on your OP for flashing; only one was successful - the rest softbricked on the flash. When I went back and flashed the 460 stock on it, it was a different stock and never did run back right - kept getting the blinking red border ring and unfortunately lost the serial #, flash, and every possible entry on the "About Nook" tab - essentially glitching it out. Since I''d only had it for 12 hours, I took it back and swapped it out for a fresh one
So the issues I'm seeing so far are:
1. It's encrypted and says as such - this is what is causing the probs later in flashing and you can't deactivate it from what I see so far without a custom recovery.
2. Patching the boo img via MagiskManager will softbrick it, and I tried with both 18 & 19 inase there were issues with one over another.
3. The device will try to auto update ASAP OTA so make sure you don't connect it to the internet before you disable that function.
4. There is no "official firmware" you can download - B&N will only let you direct download the firmware through notifications. Granted, if you want the only one I was able to find I can post it (it says its Oreo 8.1.0 but it looks different than what comes on the device and its running a crappy Android Go)
5. Its easy to unlock the bootloader per your instructions but after you get the Orange State it takes an awful long time for basic boot (which is more of a personal irritant than a problem, lol)
6. If you patch and flash the boot img with Magisk, you will completely lose the screen. Keep in mind though, if you plug it into the computer you will keep hearing the connect/disconnect chimes. It will keep doing that and neither adb or fastboot will function (even though you can fastboot devices command and it will show a Daemon output).
7. Booting into recovery becomes harder and harder from adb and fastboot once you unlock the bootloader - pressing volume rocker and power does not do it at all.
I'll try your new files and see what happens...I think the guy got a hell of a lot of potential and needs a nice streamlined rom or at the very least root to get the bloat off so its faster. But I think it says something on its crippled nature when the guys at B&N say it ain't worth it in the long run - apparently they aren't as great as even the nook HD line.
Click to expand...
Click to collapse
If you just need a temporary root, I put up this guide a few minutes ago since there was no definite resource about rooting this device. https://forum.xda-developers.com/nook-7/how-to/how-to-temporary-root-bntv460-t3963304
turtleletortue said:
If you just need a temporary root, I put up this guide a few minutes ago since there was no definite resource about rooting this device. https://forum.xda-developers.com/nook-7/how-to/how-to-temporary-root-bntv460-t3963304
Click to expand...
Click to collapse
I appreciate it, but I've since taken it back. Tell you what though, maybe I'll pick up a used one on ebay and try it