Related
Hi everyone
i have a new problem :S
today i have root my phone
and install clockworld recovery
but when i go to recovery i see Exclamation mark and android logo !!!
i press power + volume up to see option .. but i don't see all option .. like install zip from sd card !!
i want to install CM7 !!
Plz help
That's the stock recovery, not CWM.
You have to boot into bootloader mode then flash CWM recovery image from there. After flashing, select recovvery in the bootloader menu and you'll be in CWM.
suksit said:
That's the stock recovery, not CWM.
You have to boot into bootloader mode then flash CWM recovery image from there. After flashing, select recovvery in the bootloader menu and you'll be in CWM.
Click to expand...
Click to collapse
Sounds like you did not remove /etc/install-recovery.sh if you've already flashed CWM and rooted.
This script is going to install the stock recovery image on each reboot. Boot up - remove / rename this file through root explorer or something similar (or adb if you like) and then reflash CWM either via fastboot or Rom Manager.
This guide is for the Australian samsung galaxy ace plus S7500T.
---------------------------------------------------------
1. Download 0din, it allows you to flash samsung devices.
2. Put the phone into download mode.. to do so, have the phone completely off and hold volume down + home button + power, then press up.
3. Connect phone via USB to computer and open odin, you should see the device come up, tick PDA and select the recovery.tar file attached, leave all other settings as is and flash.
4. Once flashed, to get to recovery mode, have the phone completely off push and hold volume up + volume down + home + power, you will enter custom recovery.
5. Extract rootme.zip on your computer and while your phone is connected and in custom recovery, execute runme.bat – this will root the phone.. you may need to run the batch file twice.
---------------------------------------------------------
Referenced files
0din flashing software:
http://www15.zippyshare.com/v/56903223/file.html
Custom Recovery file:
http://www15.zippyshare.com/v/5017304/file.html
Root package:
http://www15.zippyshare.com/v/93779284/file.html
------------------------------------------------------
So now you should be running a custom recovery and have root access on your device.....
Flashing a custom ROM isn't too hard, though you will need to use the phones original boot.img with the new ROM for it to work.
Thank you very much, take some time looking for ways to rooting my s7500t. This is the first article I find where there is a functional description. Thanks again.
No worries, I know how hard it was for myself to figure out the process, as there is next to no information regarding our (t) model.
Sent from my GT-S7500 using xda app-developers app
how to install custom rom
Flashing a custom ROM isn't too hard, though you will need to use the phones original boot.img with the new ROM for it to work.[/QUOTE]
thanks for rooting my s7500t!i have a question how do i install a custom rom i read your posts and i changed the boot.img of the rom to mine after backup and when i flash it in CWM it says installation aborted please help or please upload the modified rom you using thanks
You can just backup your phone in recovery, flash custom ROM, then restore boot image using cwm restore advanced.
Sent from my GT-S7500 using xda app-developers app
how can I flash a jelly bean/KitKat rom, I actually tried to do it but it got stuck in a bootloop
guys,
my tab2 starts up with a system recovery screen.
i started reading on the forum, and according to many threds, i ned to wipe data/factory reset and then flash a ro. so i copied a rom(omni 4.4.2) to my micro sd, wiped data/factory reset but then it stops. There is no flash option in the system recovery screen.
anyone who can help?
thanks ina dvance.
Sounds like you are dealing with the Stock recovery.
To flash a custom ROM you FIRST need to flash a custom recovery to flash the ROM.
- For CM11 flash Philz Touch or CWM Swipe Edition through ODIN3.
- For OMNI flash TWRP through ODIN3.
This means: Get the .tar.md5 from Android Andi's file repository, install ODIN3 + USB drivers on your computer, put the Tablet into Download Mode, start ODIN3, select the recovery file as a "PDA" file, connect the tablet, flash it, disconnect after flashing, get into the custom recovery (Power + Vol UP), flash the ROM + gapps.
Or ... maybe read the OP post of the custom ROM you want to flash with a bit more care and attention - it's usually pointed out that you need a custom recovery in order to flash the ROM (stock recovery won't cut it).
BoneWithABeagle said:
Sounds like you are dealing with the Stock recovery.
To flash a custom ROM you FIRST need to flash a custom recovery to flash the ROM.
- For CM11 flash Philz Touch or CWM Swipe Edition through ODIN3.
- For OMNI flash TWRP through ODIN3.
This means: Get the .tar.md5 from Android Andi's file repository, install ODIN3 + USB drivers on your computer, put the Tablet into Download Mode, start ODIN3, select the recovery file as a "PDA" file, connect the tablet, flash it, disconnect after flashing, get into the custom recovery (Power + Vol UP), flash the ROM + gapps.
Or ... maybe read the OP post of the custom ROM you want to flash with a bit more care and attention - it's usually pointed out that you need a custom recovery in order to flash the ROM (stock recovery won't cut it).
Click to expand...
Click to collapse
thanks for the reply.
SOmehow i got the tab back into flashing to a samsung rom. Am happy it is working again, although it is with a samsung rom(those things are slow )
Will start the procedure youre suggesting.
Regards.
Hi, first, thanks for reading. Second, i've already searched de whole google world, and inside all this threads, but....
I CAN'T FLASH ANY RECOVERY! I don't know why!
In fastboot, i put the commands for flashing CWM, TWRP, Philz, and it works with no error. But, when i select the recovery option in my xt1032, it always boot the CUSTOM recovery. What can i do?
And sorry about my english, i´m from argentina.
Thank You!!
Hi. I don't get it. TWRP or CWM or Philz is custom recovery, so if you flash them to your device, of course the stock recovery will be replaced by custom recovery, so when you select Recovery option in Bootloader screen, of course it will bring you to a custom recovery. Yesterday I flashed all kinds of recovery in order to flash ROM (flashable zip file) into my phone but it failed all the time, so I decided to install stock firmware by using mfastboot (and removed custom recovery also).
outerspacebuddy said:
Hi. I don't get it. TWRP or CWM or Philz is custom recovery, so if you flash them to your device, of course the stock recovery will be replaced by custom recovery, so when you select Recovery option in Bootloader screen, of course it will bring you to a custom recovery. Yesterday I flashed all kinds of recovery in order to flash ROM (flashable zip file) into my phone but it failed all the time, so I decided to install stock firmware by using mfastboot (and removed custom recovery also).
Click to expand...
Click to collapse
So, i'm getting it wrong.... Please tell me: if i flash a custom recovery, like twrp, how can y acces to it? I though it was from fastboot>recovery
Actualy, I can't flash ANYTHING! It's so frustrating. I've tryied to flash the bootlogo, but it doesn't work either!
outerspacebuddy said:
Hi. I don't get it. TWRP or CWM or Philz is custom recovery, so if you flash them to your device, of course the stock recovery will be replaced by custom recovery, so when you select Recovery option in Bootloader screen, of course it will bring you to a custom recovery. Yesterday I flashed all kinds of recovery in order to flash ROM (flashable zip file) into my phone but it failed all the time, so I decided to install stock firmware by using mfastboot (and removed custom recovery also).
Click to expand...
Click to collapse
Sorry, i misunderstand you. "so when you select Recovery option in Bootloader screen, of course it will bring you to a custom recovery", you said. But no, it only boot de stock recovery! No matter how many times i've flahsed twrp cwm philz...
solauciel said:
Sorry, i misunderstand you. "so when you select Recovery option in Bootloader screen, of course it will bring you to a custom recovery", you said. But no, it only boot de stock recovery! No matter how many times i've flahsed twrp cwm philz...
Click to expand...
Click to collapse
If you want to flash a custom recovery, you need to have:
- Minimal ABD & Fastboot. Extract it into a folder.
- The recovery's .img file from its website. Its name may be very long, so you should rename it into something shorter, for example "newrecovery.img". Put this file into the same folder that you've just extracted Minimal ADB & Fastboot.
- Boot your phone into Bootloader screen (by first keep holding your Volume Down then press Power button for a short while). Connect the phone to your computer. In your computer, open the folder that contains Minimal ADB & Fastboot and the .img file of the custom recovery aforementioned. Now hold Shift key on your computer's keyboard and right click your mouse on the blank space of the folder. Choose "Open command prompt here''. When you see a black window, type:
fastboot flash recovery newrecovery.img
then Enter. The custom recovery will be installed right away. After that, choose Recovery on your Bootloader screen and the custom recovery will open. Yesterday I read on a website that some ROMs overwrote your custom recovery when your phone rebooted so that might be the reason why you cannot use the custom recovery you've just installed. I don't know how to solve this as I'm just a noob.
However, why do you need to install custom recovery? Does your phone still work properly? What kind of ROM are you using? If your phone doesn't work since the ROM has been messed up, I suggest you do a fresh install as this thread tutors: http://forum.xda-developers.com/showthread.php?t=2542219. After restoring your phone to a good state, you may try installing custom recovery again.
outerspacebuddy said:
If you want to flash a custom recovery, you need to have:
- Minimal ABD & Fastboot. Extract it into a folder.
- The recovery's .img file from its website. Its name may be very long, so you should rename it into something shorter, for example "newrecovery.img". Put this file into the same folder that you've just extracted Minimal ADB & Fastboot.
- Boot your phone into Bootloader screen (by first keep holding your Volume Down then press Power button for a short while). Connect the phone to your computer. In your computer, open the folder that contains Minimal ADB & Fastboot and the .img file of the custom recovery aforementioned. Now hold Shift key on your computer's keyboard and right click your mouse on the blank space of the folder. Choose "Open command prompt here''. When you see a black window, type:
fastboot flash newrecovery.img
then Enter. The custom recovery will be installed right away. After that, choose Recovery on your Bootloader screen and the custom recovery will open. Yesterday I read on a website that some ROMs overwrote your custom recovery when your phone rebooted so that might be the reason why you cannot use the custom recovery you've just installed. I don't know how to solve this as I'm just a noob.
However, why do you need to install custom recovery? Does your phone still work properly? What kind of ROM are you using? If your phone doesn't work since the ROM has been messed up, I suggest you do a fresh install as this thread tutors: http://forum.xda-developers.com/showthread.php?t=2542219. After restoring your phone to a good state, you may try installing custom recovery again.
Click to expand...
Click to collapse
I think you're rigth... I need to instal custom recovery because flashing from fastbooy doesn't worked at all... Realy, i've flashed a lot of firmwares and none of them seems to "get flashed" in mi device
Found this how-to guide and thought it might be nice to have it on site here in XDA. This is to go back to Stock ROM and Recovery. I know a lot of the roms right now are pretty experimental so here's a guide to go back to stock if you need a more solid daily driver for now. Anyway, onto the guide, but first, the sources:
Credit goes to Pedro Armindo over at: https://eusouandroid.co/instalacao-rom-original-zenfone-3-android-7-0-ou-6-0/
There's also a video here: Revert Zenfone 3 to Stock
HOW-TO: Go back to Stock Rom on ZE552KL/ZE520KL
Download the Original Rom
1. First things first, we need to download the original rom zip from ASUS for either Android 6.0 or 7.0. Go to the ASUS site and download the one that corresponds to your phone. The latest firmware for ZE552KL is WW-14.2020.1708.56:
Zenfone 3 ZE552KL - Download Original ROM
Zenfone 3 ZE520KL - Download Original ROM
2. Download the ROM, put it inside your SD (memory card) and put the SD in ZenFone. If you do not have a memory card, get one!
Install the Original Recovery
1. Download the original recovery for you ZenFone 3. Get the Recovery for the ROM you just downloaded eg. If you downloaded WW-14.2020.1708.56, donwload the corresponding recovery.
Download Original Recovery
2. Download the RootKit zip file that includes fastboot and extract it somewhere: Zenfone 3 Rootkit
3. Copy the recovery.img and boot.img to that folder from the zip you downloaded in Step #1.
4. Turn off your ZenFone 3 and turn on MODE Download (Fast Boot), to do this hold Volume Up + Power Button for 3 seconds.
5. Plug your Zenfone 3 into the computer.
6. In the RootKit folder, hold Shift and right-click anywhere on the screen and select Open Command Window here.
7. The next command will install Recovery Original, type:
Code:
fastboot flash recovery recovery.img
8. Now install the Original Boot, type:
Code:
fastboot flash boot boot .img
9. After that, wait for the success message to hold the power off button until Zenfone 3 reboots;
Installing the Original ROM
1. Turn on Recovery Mode by holding Volume Down + Power Button
2. You will be in the original Recovery.
3. Navigate with the volume buttons to Install update from SD.
4. Select the ROM you downloaded and wait for the installation to finish.
5. Go back and do the wipes
Code:
Wipe Data Factory Reset
Wipe Cache Partition
5. Restart and the Original Zenfone 3 Rom will be installed.
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
CLIIV3 said:
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
Click to expand...
Click to collapse
Did you make sure the boot.img was not corrupt. Maybe try downloading and flashing it again? Sounds odd.
CLIIV3 said:
when i do the <fastboot flash boot boot.img> and reset go into recovery it shuts down instantly can u help had to <fastboot flash recovery twrp.img> again
Click to expand...
Click to collapse
maybe a mismatched recovery/kernel version.
Which version of android are you running? Easiest way to test is just to flash a newer stock Rom. Since you have TWRP, do a full nandroid back up and then flash the latest nougat Rom and it should overwrite recovery. If recovery now works, extract the recovery partition, flash TWRP, restore your data backup and then restore your recovery backup.
got it done now just had to get the right rom for the phone and flashed it over on twrp but know it said it was rooted and then kinda just took itself off of it when doing root check its taking around 30secs to tell me unrooted when before it would tell me if it wqs or wasent in a few seconds
I have done every thing correctly, in original recovery when i press "install update from sdcard" i get "Couldent mount /sdcard" and thats it. iam stuck.
(BTW there is no sd card installed, only internal memory)
how can i resolve this?
UnKnOwN-1 said:
I have done every thing correctly, in original recovery when i press "install update from sdcard" i get "Couldent mount /sdcard" and thats it. iam stuck.
(BTW there is no sd card installed, only internal memory)
how can i resolve this?
Click to expand...
Click to collapse
try to use adb sideload
I used an external sdcard and all is working, thanks ?
Bootloader open.
ZE552KL bootloader relock isn't working.
Hi,
I would like to revert to stock but i cannot find the original recovery for my ZE520KL (ASUS_Z017D) because on your mega link there is only the original recovery for the Z012D_WW_14.2020.1708.56
Could you add "Z017D_WW_14.2020.1708.56" or indicate which one to use please ?
kyle_l88 said:
Found this how-to guide and thought it might be nice to have it on site here in XDA. This is to go back to Stock ROM and Recovery. I know a lot of the roms right now are pretty experimental so here's a guide to go back to stock if you need a more solid daily driver for now. Anyway, onto the guide, but first, the sources:
Credit goes to Pedro Armindo over at: https://eusouandroid.co/instalacao-rom-original-zenfone-3-android-7-0-ou-6-0/
There's also a video here: Revert Zenfone 3 to Stock
HOW-TO: Go back to Stock Rom on ZE552KL/ZE520KL
Download the Original Rom
1. First things first, we need to download the original rom zip from ASUS for either Android 6.0 or 7.0. Go to the ASUS site and download the one that corresponds to your phone. The latest firmware for ZE552KL is WW-14.2020.1708.56:
Zenfone 3 ZE552KL - Download Original ROM
Zenfone 3 ZE520KL - Download Original ROM
2. Download the ROM, put it inside your SD (memory card) and put the SD in ZenFone. If you do not have a memory card, get one!
Install the Original Recovery
1. Download the original recovery for you ZenFone 3. Get the Recovery for the ROM you just downloaded eg. If you downloaded WW-14.2020.1708.56, donwload the corresponding recovery.
Download Original Recovery
2. Download the RootKit zip file that includes fastboot and extract it somewhere: Zenfone 3 Rootkit
3. Copy the recovery.img and boot.img to that folder from the zip you downloaded in Step #1.
4. Turn off your ZenFone 3 and turn on MODE Download (Fast Boot), to do this hold Volume Up + Power Button for 3 seconds.
5. Plug your Zenfone 3 into the computer.
6. In the RootKit folder, hold Shift and right-click anywhere on the screen and select Open Command Window here.
7. The next command will install Recovery Original, type:
Code:
fastboot flash recovery recovery.img
8. Now install the Original Boot, type:
Code:
fastboot flash boot boot .img
9. After that, wait for the success message to hold the power off button until Zenfone 3 reboots;
Installing the Original ROM
1. Turn on Recovery Mode by holding Volume Down + Power Button
2. You will be in the original Recovery.
3. Navigate with the volume buttons to Install update from SD.
4. Select the ROM you downloaded and wait for the installation to finish.
5. Go back and do the wipes
Code:
Wipe Data Factory Reset
Wipe Cache Partition
5. Restart and the Original Zenfone 3 Rom will be installed.
Click to expand...
Click to collapse
Obrigado por dar meus créditos. Mas a pasta do MEGA com o Recovery esta offline. Você tem esses arquivos?
Thanks. But this folder on MEGA is offline. Do you have this files?
is there any way of doing this without and SD Card ?
boot and recovery
https://mega.nz/#F!LIhwiCia!b_pyuHXS9E7f2VbyXcLyXA
Rom
For ZE552KL
http://dlcdnet.asus.com/pub/ASUS/Ze...2.1095520231.1509020682-1437112090.1509020682
For ZE520KL
http://dlcdnet.asus.com/pub/ASUS/Ze...8.1095520231.1509020682-1437112090.1509020682
Link for stock recovery is dead
angeloamorato said:
Link for stock recovery is dead
Click to expand...
Click to collapse
https://mega.nz/#F!LIhwiCia!b_pyuHXS9E7f2VbyXcLyXA
I want to downgrade from latest stock to a previous version. Do I really need to install the recovery from the previous version?
jpeg725 said:
I want to downgrade from latest stock to a previous version. Do I really need to install the recovery from the previous version?
Click to expand...
Click to collapse
yes
I've installed TWRP & donwgraded to Android 6.
Now I want to upgrade to 7.0 because it supports VOLTE... do I really need to rollback twrp to the original recovery?
bibile said:
I've installed TWRP & donwgraded to Android 6.
Now I want to upgrade to 7.0 because it supports VOLTE... do I really need to rollback twrp to the original recovery?
Click to expand...
Click to collapse
yes
Stock recovery not working.
I have changed the ROM to my Asus Zenfone 3 ZE552KL many times. Tried again this morning,and last night.Failed.
Long story,please be patience with me.
- I managed to get the latest ROM from: https://www.asus.com/ro/Phone/ZenFone-3-ZE552KL/HelpDesk_Download/ (actually i got it from the english version) and installed the latest using the stock recovery.
- Previously i had root on my phone by flashing with TWRP, SuperSu. With the latest firmware from the official Asus site, SuperSu is not working anymore. I tried different versions of Supersu (flash versions and app versions) nothing worked. I was unable to get root back on my phone. For me root is very important.
- If i try to install stock rom's using TWRP 3.02. i can't. TWRP 3.0.2 does not recognize my sd-card, i can only copy rom's into internal storage. NO stock rom (even the old ones from 2016) will install on twrp 3.02.
If i install TWRP 3.1.0 or TWRP 3.1.1 i can access sd-card and install all the rom's. Installing is successful but it will boot about 5 times until i get message "your device has failed verification and may not work properly . The device will shutdown in 10 seconds"
- The solution that i found 1 month ago, is to flash stock recovery, and install using stock recovery a stock rom from asus website. I tried to do this last night & this morning. Failed to do so. Reason: no stock recovery works anymore. You can find stock recoveries here : https://www.asus.com/zentalk/thread-88883-1-1.html I also tried to ask for help on that forum, but it won't let me post in that thread.
- I had an old stock recovery, but i lost it. I need a stock recovery that will work. After i flash the stock recovery it gets stuck at "powered by Android" it does not continue from there.
- I can flash back custom TWRP recovery, but even if i install official stock rom it wont boot. I need a working stock recovery, or any solution.
I am stuck . Please help me!