Hi All,
I'm running into a problem with rooted page 4.4.2 release, if I kill deamonsu, with the terminal I able to successfully enter a lock pin and initiate the encryption process. Upon completion and reboot I'm unable to enter the unlock pin and after the 10th time the table is erased.
Any suggestions or ideas on how I can make this work?
Thanks,
Laz.
Sent from my SM-P905V using Tapatalk
Related
Hi,
I have for the first time rooted my HTC Desire. And for the first time also just installed a ROM, LeeDroid 3.0.6-R2. Everything works fine, so I think, but one thing.
I've set up my Exchange account to my work and entered a new pin code. The pin code works every time when the phone locks and I need to enter the pin to unlock it. But as soon as I go into Clockwork Recovery mode and then do nothing but restart the phone, it doesn't accept my pin code. After 8 failed attempts it wipes my phone automatically.
When it happened the first time I thought I messed up with the pin code. So I wiped the phone and started over (not reflashing the ROM), setting up Exchange with the same pin code. But it didn't accept the one I used previously. So I choose a new one, simple, 0000. Tried several times to unlock with the pin after the phone had locked. Then just now I rebooted again with Clockwork Recovery and just restarted the phone and it again won't accept my pin code.
I don't want to disable the policy and not have a pin code via some app.
Has anyone had this issue before? It's like my pin code isn't saved once I go into Recovery mode. But it still enforced the policy.
This will be the 4th time I have to wipe my phone and start over -.-
TIA
Ok, so I tried after my last wipe last night to not configure Activesync and just go into security and set a regular pin. Let the phone lock, worked. Restart phone into recovery, restart again. Doesn't work.
So I think I've managed to solve the issue. Reboot the phone completely (not into recovery) after I've set the pin code. Try to see if it works, which it did, then boot into recovery and again reboot to normal. Pin code still works. Odd....
Sigh.....nope. Still the same problem when I rebooted the phone. I still need help :'(
Someone must have some ideas?
Bumping. Halp!
Hi all,
I'm running CM11 on a Moto G. Due to work requirements I encrypted my phone via the security settings. It all went as expected, until I got to the screen where I have to enter my password to decrypt storage...
Once I enter the correct password, it loads a screen with an android on (I think it was similar to the one from the encryption screen) very briefly, then goes blank. I presume it turns off as it doesn't do anything else for quite a while. If I reboot and try enter an incorrect code, it prompts for the right code, so I'm definitely entering the correct pin.
My questions is - is there any way around this (without wiping the phone)? Any idea what's gone wrong?
I can still access recovery, but obviously it's rather limited as it's all encrypted. Is there any way I can connect via PC to get my files and decrypt them as I know the password?
I have an HTC One S running Candy ROM 4.4.4
When I run the encryption process it asks for my pin, reboots and goes through the encryption process,
but when it boots up it asks for a password that i didn't set.
When I try to set a password and encrypt my phone it doesn't let me,
it just goes through a normal reboot.
Could there be a built in password that it is looking at and if so is there a way to change it?
ogre55 said:
I have an HTC One S running Candy ROM 4.4.4
When I run the encryption process it asks for my pin, reboots and goes through the encryption process,
but when it boots up it asks for a password that i didn't set.
When I try to set a password and encrypt my phone it doesn't let me,
it just goes through a normal reboot.
Could there be a built in password that it is looking at and if so is there a way to change it?
Click to expand...
Click to collapse
The password is your PIN. The android system uses the lock screen pin for the encryption process.
How do I reset the passcode on a nexus 5 without doing a reset? I've tried logging into the google acconut, and I can use the "find" option in the device manager to locate the device, but if i press the "lock" button and try to enter a new password, for a split second it says "We have sent a lock request to the device", but then it says "Since Google has verified that a screen lock is already set, the password you entered won't be needed." Wtf is going on? Is there another way to reset the password?
I have not tried this and I do not know if it's updated for Lollipop, so use with caution.
This thread discusses how this can be accomplished if you have custom recovery installed or if USB debugging is enabled. If neither of those are true, you'll have to do a factory reset, there are no other options.
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
BluGuy said:
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
Click to expand...
Click to collapse
You need to re-enable the pin from lockscreen options
Sent from my A0001 using Tapatalk
cloudx720 said:
You need to re-enable the pin from lockscreen options
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I think you misunderstood. The lockscreen still ask for a pin. When the phone has encryption turned on, when you either restart or turn the phone on you will receive a prompt on a grey screen to enter you pin. At this point Android hasn't fully booted yet. It then checks the pin and then boots Android. My phone is no longer brining me to this grey screen, it flashes grey but seems to just skip that screen. It is just fully loading android all the way.
BluGuy said:
I have had my phone encrypted for a while now. The other day I decided to install the Google Screenwise app since I take part in the panel. During the setup process it said I had to enter my pin because it "affected" encryption. Well I entered it and went about my business.
Now for the weird part. I needed to restart my phone later on and as it booted up, where it would ask me for my pin before it would boot Android, it now flashes a grey screen really fast and continues booting to the lockscreen where I can enter my pin. When I check under settings it says that my phone is still encrypted, and yet never ask me for my pin during boot up.
Anyone know what's going on here? Am I going to have to do a factory reset to get encryption working correctly again?
I am on Cyanogen OS 12.1 build YOG4PAS3JL.
Click to expand...
Click to collapse
If you set up pin code again will ask if you want pin to boot.
You have two option
One is pin to boot
Other pin after boot
I do not use screenwise for related issues
But i am familiar with encryption
Encryption will exist unless do factory reset
geowolf1000 said:
If you set up pin code again will ask if you want pin to boot.
You have two option
One is pin to boot
Other pin after boot
I do not use screenwise for related issues
But i am familiar with encryption
Encryption will exist unless do factory reset
Click to expand...
Click to collapse
I didn't even know it had the other option in it to ask for the pin during boot up. I would have thought if there was an option for that it would be in the Security menu with encryption rather than the lockscreen menu. Thanks.