I'm after the easiest way to tether my new moto G without it being picked up by my carrier. Previously I had a first gen moto G running various custom ROMS and it wasn't a problem. This is the first phone I've bought so close to launch and it's starting to be an issue, as the WIFI in my house is patchy at best and I can't be doing with hours of downtime. Anything which requires a client side programme is no good to me as I'm running a chromebook & things can be a little weird.
some luck
I have a moto e but same problem, ive done everything, edit with sql, edit buildprop, change apn settings. nothings helps but I did install xposed framework and the module X tether, that at least got native tethering to turn on but it wont connect to the net because of a dns problem, however, blue tooth tethering does work just fine so that's an option for you.
Any update on this? Does anyone know a ROM for this phone that still have the 'twist' to take a photo? Or the active display that's famous across all the moto phone?
I really enjoy those features but looking for a ROM or way to undetectable tether
Related
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
elguapo76 said:
Wifi tether doesn't seem to work for some of us. For me personally it connects but does not have an internet connection. Is it working for anyone? Failing?
Click to expand...
Click to collapse
Having same issue as you. My dell mini 10v connects, takes a bit longer then usual to acquire network address, and when it does the internet still doesnt work.
I'm sure its just a matter of the program being updated to work on the CDMA hero
Ditto
I'm having the same problem as well. Connects after a very long time and receives IP information, but nothing after that. Has anybody reported to the wifi-tether developer yet?
As soon as it works on the Hero, I'm ready to donate, as I gladly paid money for WmWifiRouter on my previous phones.
Same problem with me. Is anyone else getting the "AC disabled" message in the notification window once the PC is "supposedly" tethered? I noticed my phone getting really hot.
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
teli said:
I'd really like to know why this works in the Mocado ROM but not just by installing the application alone after rooting. I don't want to start messing with custom ROMS just yet.
Click to expand...
Click to collapse
Not sure but what I did notice is that when I ran it for the first time on Mocado's ROM I got a prompt asking me to "Allow" the app certain rights. Now when I installed the app before I flashed his ROM but right after rooting my phone I did not get this prompt. Maybe the way it's installed on his ROM has something extra that has it correctly and fully installed on the ROM to allow it to work properly.
the permissions screen is just adding the program to the super user whitelist kinda like a list of programs permitted to run as su maybe downloading super user white list off the market I remember getting it from there with my G1 if not just pull the apk from the modaco Ron but you should try the modaco rom you don't even have to wipe all your settings and everything will stay the same.
I know it isn't ideal, but you can share the internet connection ICS style if you do the following:
adb shell
Code:
su
/system/bin/netsharing net on
echo 4 > /sys/devices/platform/msm_hsusb/usb_function_switch
At which point you will get disconnected from your adb shell and the internet Windows will recognize the Hero as an NDIS adapter. To turn it off I just go into Settings -> Wireless -> Mobile network sharing and toggle it on then off again.
There might be a way to get netsharing to also flip the usb function, using net_and_usb but it doesn't seem to work and my ARM disassembly skills aren't good enough to tell why.
Hey guys,
My wifi tether did not work, even with root, until I installed MoDoCo's ROM. After I did, it was gravy from there. 2.4 down .60 up.
mine works
mine works too, i just use it as a wireless router...
Mine works flawlessly on MoDaCo's Rom. Im guessing it has something to do with a string of code that the custom rom has that the stock one doesnt.
I finally took the plunge into the MoDaCo rom. Easy as pie and tethering works with no prob. Just Do it.
Yeah. I see no reason why not to go with the MoDaCo's. This was my first time flashing a rom on anything and it got it easily the first try.
Can all of ya'll confirm that the encryption or device access list does NOT work on wifi tethering app?
Device access list seems to work fine for me, but the encryption does not.
Anyone know if there's a workaround for USB tether yet, that allows native mobile network sharing? (not that crazy switch off/switch on quickly workaround that doesn't always work)
I don't really like the wifi tether because it drains my battery, even if my phone is plugged in to my laptop via USB.
Also, I haven't been able to get above 1.2 mbps down speeds with the wifi tether, and I was hoping that native mobile network sharing might help this. Anyone else having slow connection issues with this?
Wifi tether does not work on the stock Sprint ROM. It does (for some reason) work on Modaco's.
Check this link for the developers thread on whats happening - http://code.google.com/p/android-wifi-tether/issues/detail?id=188
He doesnt have a Sprint Hero to test with so he needs our help.
fixed!
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
auto_exec said:
The developer has released a new "pre-version" of Wireless Tether that works on the stock Sprint HTC Hero ROM (with root access, obviously)! As per user capnbry, "..the problem is that the gprs table has a default route on it, and it has a higher priority than main, which is where the wireless route goes. If you `ip route delete table gprs` after starting android.tether everything works like a charm." The developer has added this step into the program, and it works!
See the thread for details, or download the new "pre-version" here: http://android-wifi-tether.googlecode.com/files/wireless_tether_1_61-pre1_htc.apk
Click to expand...
Click to collapse
I just tried this app on my computer, and I can confirm that the pre release works on the HTC Hero stock rom with no problems. I did this test on Windows 7 x64
So I rooted my LG Lucid 2 from this guide: http://androidforums.com/lucid-2-al...ition-5-7-13-full-technical-notes-inside.html
The one thing I noticed is that afterwards, tethering by any method (wifi tether, usb tether, bluetooth tether) is now impossible. After doing some research i think that the rooting method removed the system app "hotspotprovision.apk"
I know the root for this phone had to dissable some root checker tool that lg built into the phone, but do you think that removing the hotspot app is necessary? or can i get it back without having my phone tell verizon that i'm messing with my phone (the link tells all about the weird root checking tool LG tried to hide)?
Any help would be awesome! I just need some way to tether due to it being my main source of internet when i am at school.
all apps like pda net, foxfi, wifi tether, and all the other apps just start with errors, and when i try to start up the built in usb tether option i just get an error saying "Sorry! Unfortunately Provision has stopped"
Even with a factory reset and/or re flashing the firmware is still doesnt work.
Has ANYONE else with this phone tried to use any tether apps? If so have they worked or failed? I don't even know if this is happening to just me, or if everyone who owns this phone is without the tether ability
It would just help me a lot to know if somebody else has the same problem or even doesn't. I'm trying to decide if I need to return the phone or if i just need to wait for a software update of some sort..
Thanks guys for the help.
USB tethering
Nikguy said:
Even with a factory reset and/or re flashing the firmware is still doesnt work.
Has ANYONE else with this phone tried to use any tether apps? If so have they worked or failed? I don't even know if this is happening to just me, or if everyone who owns this phone is without the tether ability
It would just help me a lot to know if somebody else has the same problem or even doesn't. I'm trying to decide if I need to return the phone or if i just need to wait for a software update of some sort..
Thanks guys for the help.
Click to expand...
Click to collapse
I recommend EasyTether. It works with non-rooted phones, and the LG LUCID that has been rooted. I particularly like the fact that I can use it with both Windows and Linux.
Ok thanks ill give it a shot! Ill let everyone know if it works in a sec
So for some reason no matter what i do, wireless tethering wont work unless i bought the tether service for verizon... i got the usb tether side of foxfi to work but so far wireless tethering is out of the question.
I cant believe no one has posted about this problem except me! Is it literally only me that has this problem? Ive been posting about this all over the internet since the phones release and so far no one has tried to use a tether app to confirm that this is not just a defect with my particular phone!
Im having the same problems
No functional WiFi tethering
But other people have had successes
I going to try usb wired tethering next
Ok cool, thanks for the response. I was able to get usb tethering to work on pda net, but that requires installing another client on my computer as well, and connecting isnt always seamless. I mostly want a wifi hotspot to power all my other wifi only devices once i go off to school at the end of august.
So has anyone figured out how to get the wireless tether working after root? Just curios.
Not that is know of... Head over to android central. They are working on a ROM there which cooooould lead to a tether option in the future
Mine wont work either.
how to get your lg lucid running ICS 4.0.4 with wifi tether
jenkies said:
So has anyone figured out how to get the wireless tether working after root? Just curios.
Click to expand...
Click to collapse
I have managed to get my lg lucid running ICS working with wifi tether (infrastructure mode)
check out the how-to over at my site.
i'm sorry it will not let me post links. heres address no dots
gringo466howto blogspot com
I had that issue with an old LG Optimus Logic
I'm glad I read this thread, because i was about to root my Lucid 2, but I probably would've ran into this problem too. I think some people who have this phone with Verizon Wireless were given a different type of software for tethering. I'm guessing me and you have one of those ones where It only works solo. No mods allowed, but the app below has been said to work regardless. I guess it's worth a shot.
Verizon uses an authentic piece of software for their tethering protocol. I don't know why it seems so mysterious, but it doesn't seem to work exactly like most hotspot protocols. You might have to confess, and get them to help you out. If i were you, and If the original tethering app doesn't work, then try to install the stock firmware back, and use a different root method next time.
-update-
Try 'Tetherfy(WiFi Tether w/o Root) on play store. I don't think i'll be able to make an 'apk' file out of Verizon's 'Mobile Hotspot' app. I believe they have it locked into phone.
The guy's method in the post above might work too. I don't see why not.
hey there
I have noticed your post for a long time and tried various kinds of methods to use wireless tether but failed.
someone told me this device can be flashed to as980 firmware,so i tried and then my android native hotspot function works!
there is my way .
1.download as870 .kdz firmware from somewhere.here is downlaod link(add dots by yourself plz) pan baidu com/s/1ETkrO
下载724.7M)
2.enable "download mode"on your phone
3.use KDZ_FW_UPD to flash
system will be automaticly restart and you will found that your apps and settings are remained.
[HOW-TO] Enable Wifi and USB Tethering on AT&T Samsung Galaxy S4 with Android 4.3 MK2
After some research on various forums including this one, I got both Wifi and USB Tethering working on my AT&T Samsung Galaxy S4 with Android 4.3 (build MK2). Figure others may look for similar solutions so I put together the steps I used in this post.
1. Background
I have been tethering with SVTP (paid version) since acquiring the Galaxy S4 in June 2013, with my unlimited data plan. Then it stopped working after a week when AT&T pushed out the software update. Furious, I googled around and found the "Click the home button when the checking popup appears" trick, and had been happily tethering, until AT&T push another update (MK2) two weeks ago. It defeated that trick and none of the tethering apps work. Oh man, not again!
I googled again and found FoxFi. The wifi tethering didn't work (it only work on Verizon as reported(), but the USB and Bluetooth tethering do work. I am relived as I had a temporal solution. However, both the USB and Bluetooth tethering drop and resume the internet connection every minute. Very annoying when downloading a bigger file, or playing online games that require constant connection. Finally can't stand it anymore. I keep googling around and found there's no other solution except rooting the device. And I decide to take the risk and give it a shot.
2. Result
After following the steps, I was able to get all tethering apps works. Specifically all these works;
SVTP
ES File Manager
FoxFi
And, the native Tethering from the phone also work. This give me the hint that probably most, if not all, tethering apps should work.
Furthermore,the built-in USB tethering also work! Unlike the one from FoxFi, this one work continuously without dropping/resuming the connection every minute. This can be handy as you can charge your phone while tethering. Pretty cool, uh?
Last but not least, I disable the AT&T Software update, so I don't have to do this again
3. Steps
Here's the steps I used. I piece them together from various sources. Many thanks to the folks who put them together, and to the folks who tried before me and post the positive result. Basically you need do to a few things:
a. Root the device
b. Modify the tethering file
c. Turn on tethering and verify it works
d. Disable the AT&T Software update (Optional)
Please see the next post for details.
Steps
a. Root your device
Scary, isn't it? I was in the same boat and really hesitated to do it. However with no other option available it may worth a try. It does work well and give you good control of the phone. Worthy in my opinion, especially when it allows you to do what you want to do.
a1. If you are new to rooting your phone like me, some background reading may help:
http://www.kingoapp.com/help/android-rooting.htm
https://sites.google.com/site/tomsgt123/all-videos/samsung-galaxy-s4
a2. Watch this video as a preparation and confidence building:
http://www.youtube.com/watch?v=uii_mYm8IGE&feature=youtu.be
a3. Root your device using the steps here. It echoes the steps in the video. Even though it is made for the Verizon model, it works on AT&T too:
http://forum.xda-developers.com/showthread.php?t=2565758
b. Modify the tethering file:
b1. Follow the steps in the post. It works:
http://forum.xda-developers.com/showthread.php?t=2535141
b2. Pay attention to the mount /system as RW mode step. It is missing in the original post:
"I was not able to rename files or copy until I change 'Mount R/W'.
To do this, you click on globe/phone on top left corner.
Scroll down to "Root Explorer" and hold for a second or two.
When you let go, a pop-up screen appears. Click on Mount R/W,
and change "/system" from OR to RW."
http://forum.xda-developers.com/showpost.php?p=48950107&postcount=87
c. Verify tethering works
c1. Use your favorite tethering app, it should work. Just disregard the AT&T Popup (click OK).
And if you don't use any tethering app before, rest at ease. Your phone's native Wifi and USB tethering also work. That maybe the best part as you don't need to purchase any "unlocked" version of those apps. Just go to "Settings->More networks->Tethering and portable hotspot". Turn on Mobile Hotspot and you can use Wifi tethering as usual.
c2. Or while at the same screen, connect your phone to the laptop with a USB cable and enable "USB tethering". Your laptop will automatically install a USB driver and you will be connected to the internet via USB. This option works especially well when all you need is connect one laptop to the internet. It not only saves the battery of your phone by not using Wifi, but also charge your battery while tethering!
c3. Stil not enough? How about make your laptop a wifi hotspot? Follow the steps here:
http://lifehacker.com/5369381/turn-your-windows-7-pc-into-a-wireless-hotspot
This way, you charge your phone while tethering using USB, your laptop is on the web, and others can connect to the internet via the Wifi hotspot on your laptop. It is a win-win-win situation
d. Finally, if you don't want to be annoyed in the future and redo all these again (which may or may not work anymore as they may close the door), turn of AT&T Software update. Follow the steps here:
Stopping AT&T Auto Software Update
Download and install "App Quarantine ROOT/FREEZE" from Play Store.
Open the app and go to settings by tapping on the wrench icon at the top right of the screen.
Uncheck the "Hide system services" option.
Go back to the app and select "AT&T Software update".
Tap on the lock icon on the top right of the screen.
It may ask you to enable the USB debugging.
Feel safe from AT&T's new attack
http://forum.xda-developers.com/showthread.php?t=2387577
Again, many thanks to those who put the information together, and to those who tried it and proved it worked. You guys are great! Happy new year and happy tethering!
Good job!
I'm sure a lot of people will benefit from this.
I can verify that this method works perfectly for my ATT S4 Active ML2 - thank you!!!
Just found this thread today, I've been planning on rooting my phone for some time now and tethering is one of the biggest reasons why.
I just wanted to confirm that this fix has allowed you to tether using the native tethering function in android with an unlimited (grandfathered) AT&T data plan and you haven't had any problems with AT&T harassing you about it. I'm in the same boat and don't want to lose my unlimited data as I've heard as happened to some people.
Also thanks for the guide!
Does anyone know if this will work on non samsung AT&T phones. Like the HTC M8?
ProdigalHacker said:
Just found this thread today, I've been planning on rooting my phone for some time now and tethering is one of the biggest reasons why.
I just wanted to confirm that this fix has allowed you to tether using the native tethering function in android with an unlimited (grandfathered) AT&T data plan and you haven't had any problems with AT&T harassing you about it. I'm in the same boat and don't want to lose my unlimited data as I've heard as happened to some people.
Also thanks for the guide!
Click to expand...
Click to collapse
Yes, it works fine with the AT&T unlimited data plan.
This is for everyone who has been pulling their hair out trying to figure out how to wifi- tether on T-Mobile LG-G2, without getting blocked by T-Mobile. I have tried multiple methods and this is the only one that seems to work perfectly every time. this method uses the native hot-spot and NOT wifi-tether. I was only able to get Wi-Fi tether to wok on ASOP rom. (cm10.2) This method works great on the stock rom. Keep in mind I do have the unlimited data plan.
I actually just called T-Mobile yesterday and had them upgrade my plan to the 2.5 GB of free hotspot data (was 500MB previously) that is included in the unlimited $70 plan.
need to be rooted (not sure if custom recovery is needed by I do have one)
have HOTSPOT SHIELD VPN installed on your phone
Turn on hotspot shield vpn and let it connect and secure your connection. once you see the key in the top left corner you are good.
Then you turn on the native hotspot on the phone, configure your SSID and password if you like. the native hotspot should now be detected by other devices, simply connect and you should be good to go without using your hotspot data or receiving the blocked site page from T-Mobile, just as long as the vpn is still connected.
trust when I say I have spent hours and hours and days and days trying to find a method that worked, and this one does seem to do the trick (at least for the past few days lol) I have used it to connect to my kindle fire, other android phones, and my ps3.
Test it out and see how it works for you. let me know if you have success or not.
**Now I do believe you must have some amount of hotspot data remaining in order to use this method or it wont connect. otherwise you will have to wait until your hotspot data allotment refreshes at the beginning of your new billing cycle**
The way I do mine is by changing the user agent on chrome to something else and it works. Now i have a d802 rom so im not sure about stock rom,
Before there was tether in the plan it used to tell you right away to add it when you turn on tethering on the samsung devices but by doing some mods with framework-res.apk to change the tethering apns it would let you use it without that pop up. But always have a user agent
gypsy214 said:
The way I do mine is by changing the user agent on chrome to something else and it works. Now i have a d802 rom so im not sure about stock rom,
Before there was tether in the plan it used to tell you right away to add it when you turn on tethering on the samsung devices but by doing some mods with framework-res.apk to change the tethering apns it would let you use it without that pop up. But always have a user agent
Click to expand...
Click to collapse
You know i have tried using a user agent but i didnt work for me for some reason. Im running Buckeye V2.1 rom which is a stock rom but its super fast over the stock out of the box rom. I seem to like the lg g2 rom over asop which judt seems a bit boring now. I will have to try the user agent method again and see whats happens. There doesn't seem to be a whole lot of support or love for the d801 right now so i was banging my head against the wall trying to get it to work but this seemed to work for me. I always check my hotspot data via the t mobile app just to make sure no hot spot data is being used and so far so good using vpn. Just wanted to share in case it works for others.
JKLIMES1 said:
You know i have tried using a user agent but i didnt work for me for some reason. Im running Buckeye V2.1 rom which is a stock rom but its super fast over the stock out of the box rom. I seem to like the lg g2 rom over asop which judt seems a bit boring now. I will have to try the user agent method again and see whats happens. There doesn't seem to be a whole lot of support or love for the d801 right now so i was banging my head against the wall trying to get it to work but this seemed to work for me. I always check my hotspot data via the t mobile app just to make sure no hot spot data is being used and so far so good using vpn. Just wanted to share in case it works for others.
Click to expand...
Click to collapse
I use Chrome and I change my user agent to safari on mac. It seems to work. I reached the 2.5GB of hotspot for tmobile but changing the user agent i dont get that tmobile screen. Also tried it on stock out of box rom and it works
i tried this with the Hotspot shield but it was a no go for meit still counted towards my hotspot data. is there a more detailed way?
Doesn't work for me either.
Sent from my LG-D801 using Tapatalk
dymmeh said:
After reading about the Xposed framework I decided to write a module to bypass the validation checks for wifi tethering / mobile hotspot.
This method will allow you to bypass the validation without having to worry about moving around APKs, backing them up, setting permissions, etc. It also will no longer contact the actual servers used to verify if you have permission to use the tether.
This Xposed module works by replacing the list of entitlement apps available in the string array "config_mobile_hotspot_provision_app" with an empty set. This means that the entitlement app is not run at all and defaults to the native tether immediately.
Works with VZW, AT&T, Sprint, DE and non-DE devices running 4.4 or 4.4.2.
Installing
Be rooted and have the Xposed framework installed
Search for and download "X Tether" under the download section of the Xposed installer
Activate the module in Xposed.
Reboot.
Tether away!
SPRINT ONLY: Change the line ro.mot.tether_dun_required=1 in your build.prop file to ro.mot.tether_dun_required=0
Link to Xposed repo
Click to expand...
Click to collapse
This guy made this for the Moto X, however people on rooted Moto G's have this working on their devices.
I just recently purchased an unlock code and rooted my Verizon Moto G (Yes, you read that right, Verizon) and installed this tweak.
The Verizon Moto G doesn't even have the menu options for tethering, however it did make this app work. (It used to say that my plan doesn't have tethering and whatnot)
When enabled, my phone does broadcast and other devices can connect, but it seems as if DHCP isn't getting enabled because no device can get an IP lease.
So close, yet so far.
Anyone here knowledgable enough to get this working right?
but2002 said:
This guy made this for the Moto X, however people on rooted Moto G's have this working on their devices.
I just recently purchased an unlock code and rooted my Verizon Moto G (Yes, you read that right, Verizon) and installed this tweak.
The Verizon Moto G doesn't even have the menu options for tethering, however it did make this app work. (It used to say that my plan doesn't have tethering and whatnot)
When enabled, my phone does broadcast and other devices can connect, but it seems as if DHCP isn't getting enabled because no device can get an IP lease.
So close, yet so far.
Anyone here knowledgable enough to get this working right?
Click to expand...
Click to collapse
Few things:
Can you link to who or how you got the unlock token (seen it before but it ended for the one source)
Supposedly the kernel has been modified to kill tethering at the core or something. Some tether apps that require root, can fix this by putting in what was removed.
Also, you can use pdanet+ to use bt to share your internet. It requires pda tablet on the other device and you probably can't share more than one device at a time but at least it doesn't require root or any major workarounds.