MultiRom-Secondary Rom Boot Loop - ONE Q&A, Help & Troubleshooting

Hi guys!
So, i tried multi rom for my oneplus one.
But when i try to run the secondary rom( I tried CM12.1 and CM12S, in the video i am using CM12S) it bootloops and leads me to recovery mode!
Here's the video : https://www.youtube.com/watch?v=XVujftB3oPQ
Can you help me?

Welizaki said:
Hi guys!
So, i tried multi rom for my oneplus one.
But when i try to run the secondary rom( I tried CM12.1 and CM12S, in the video i am using CM12S) it bootloops and leads me to recovery mode!
Here's the video : https://www.youtube.com/watch?v=XVujftB3oPQ
Can you help me?
Click to expand...
Click to collapse
Which is your primary rom
Have u correctly flashed latest multirom
Are u using gapps to flash along with secondary romif yes don't flash gapps first time just flash secondary rom

walpanmad said:
Which is your primary rom
Have u correctly flashed latest multirom
Are u using gapps to flash along with secondary romif yes don't flash gapps first time just flash secondary rom
Click to expand...
Click to collapse
Cm11S
Yes
No the rom in the video it's without gapps

Welizaki said:
This is u r solution follow correctly
http://forum.xda-developers.com/one...ips-tricks-t3027926/post58776196#post58776196
Click to expand...
Click to collapse

walpanmad said:
Welizaki said:
This is u r solution follow correctly
http://forum.xda-developers.com/one...ips-tricks-t3027926/post58776196#post58776196
Click to expand...
Click to collapse
thank you very much mate!
Click to expand...
Click to collapse

Welizaki said:
walpanmad said:
thank you very much mate!
Click to expand...
Click to collapse
If me really helped u just press thnx button it will be my pleasure
Click to expand...
Click to collapse

walpanmad said:
Welizaki said:
If me really helped u just press thnx button it will be my pleasure
Click to expand...
Click to collapse
btw now when i boot on my CM11S it doesn't unlock.
To unlock it i have to plug in a usb cable!
It doesn unlock neither from the power button nor the double tap to wake!
Click to expand...
Click to collapse

Welizaki said:
walpanmad said:
btw now when i boot on my CM11S it doesn't unlock.
To unlock it i have to plug in a usb cable!
It doesn unlock neither from the power button nor the double tap to wake!
Click to expand...
Click to collapse
I am not so familiar with cm 11s because i never used it for long time
But u can
1)chek if hardware buttons are enabled and assigned correctly in settings ( again try to set different keys like home button or volume keys for screen wakeup)
2)Again if u r using custom kernel having synapse control then set double tap to wake option from synapse
3)check if u have enabled any deep •0ƒ8 sleep option
4)check if u enabled wakelock blocker disable it no
Click to expand...
Click to collapse

walpanmad said:
Welizaki said:
I am not so familiar with cm 11s because i never used it for long time
But u can
1)chek if hardware buttons are enabled and assigned correctly in settings ( again try to set different keys like home button or volume keys for screen wakeup)
2)Again if u r using custom kernel having synapse control then set double tap to wake option from synapse
3)check if u have enabled any deep •0ƒ8 sleep option
4)check if u enabled wakelock blocker disable it no
Click to expand...
Click to collapse
none of these, i flashed some proximity sensor fix and it worked
thanks mate
Click to expand...
Click to collapse

Related

4.2.2 Reboot options

Is it just me? Or are the advanced reboot options in 4.2.2 missing? They were there in 4.2.1 lol.
Long press still brings up safe mode but other than that reboot into recovery and bootloader appear to be gone.
That´s 4way reboot MOD, not in ROM, just somebody implemented it into his ROM.
Beloch said:
That´s 4way reboot MOD, not in ROM, just somebody implemented it into his ROM.
Click to expand...
Click to collapse
I didn't realize. I didn't "switch" ROMs...just "upgraded". Apparently the guy making the ROM I'm using forgot to include it in the his new release.
Thanks for the info Beloch =P
zath said:
Is it just me? Or are the advanced reboot options in 4.2.2 missing? They were there in 4.2.1 lol.
Long press still brings up safe mode but other than that reboot into recovery and bootloader appear to be gone.
Click to expand...
Click to collapse
Hi,
Go to settings/developer options/advanced reboot and tick it.
malybru said:
Hi,
Go to settings/developer options/advanced reboot and tick it.
Click to expand...
Click to collapse
Hm, I dont see a developer options anywhere in settings. It's usually at the bottom isn't it? Maybe this particular ROM has that menu disabled/hidden....
zath said:
Hm, I dont see a developer options anywhere in settings. It's usually at the bottom isn't it? Maybe this particular ROM has that menu disabled/hidden....
Click to expand...
Click to collapse
keep tapping the build number.
zath said:
Hm, I dont see a developer options anywhere in settings. It's usually at the bottom isn't it? Maybe this particular ROM has that menu disabled/hidden....
Click to expand...
Click to collapse
Hi,
If you are using Albinoman's ROM,all these things are clearly explained in the first post.
arabology said:
keep tapping the build number.
Click to expand...
Click to collapse
You freaking ROCK! Thanks!
malybru nah I'm using NJB http://forum.xda-developers.com/showthread.php?t=2119407
got to System Settings-->System--> Power Menu to enable advanced boot options

[Q] Back button problem

Dear all,
i am facing back button problem its not working
but when i am using other button backlight of back button is getting on
its out of warranty
so kindly suggest what should i do
azhar.munshi said:
Dear all,
i am facing back button problem its not working
but when i am using other button backlight of back button is getting on
its out of warranty
so kindly suggest what should i do
Click to expand...
Click to collapse
First, be clear while asking any Help.
Mention the ROM over which you are..??
Have you enabled anything..??
Did you flashed anything..??
Reply with Above ^^ question.
i am on avatar rom
i didnt update any thing
i am facing this from last day
Disturbed™ said:
First, be clear while asking any Help.
Mention the ROM over which you are..??
Have you enabled anything..??
Did you flashed anything..??
Reply with Above ^^ question.
Click to expand...
Click to collapse
i am on avatar rom
i didnt update any thing
i am facing this from last day
azhar.munshi said:
i am on avatar rom
i didnt update any thing
i am facing this from last day
Click to expand...
Click to collapse
If you have any backup then flash it then report.
Disturbed™ said:
If you have any backup then flash it then report.
Click to expand...
Click to collapse
i had tried it but no change
its not working in recovery mode also
azhar.munshi said:
i had tried it but no change
its not working in recovery mode also
Click to expand...
Click to collapse
Do one thing. Take the backup of your ROM & flash Stock GB using Odin V 1.85. If it still become pain then GO to SSC.
Disturbed™ said:
Do one thing. Take the backup of your ROM & flash Stock GB using Odin V 1.85. If it still become pain then GO to SSC.
Click to expand...
Click to collapse
i had tried this also but same not working can anyone gives me link for changing touchscreen of galaxy r video
please
azhar.munshi said:
i had tried this also but same not working can anyone gives me link for changing touchscreen of galaxy r video
please
Click to expand...
Click to collapse
galaxy R Video.??
What he is asking is tutorial video...
Sent from my GT-I9103 using xda app-developers app
galaxy r back and menu button
karthik050782 said:
What he is asking is tutorial video...
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
even for my galaxy r, back button is not working. I was using stock gingerbread. i flashed cyanogenmod nightly and back button doesnt work. so its hardware issue. and my menu button gets executed on its own. so if i can disable these hard keys and get the soft buttons on the screen itself, it wuld solve the problems. help me do it..
lavsen said:
even for my galaxy r, back button is not working. I was using stock gingerbread. i flashed cyanogenmod nightly and back button doesnt work. so its hardware issue. and my menu button gets executed on its own. so if i can disable these hard keys and get the soft buttons on the screen itself, it wuld solve the problems. help me do it..
Click to expand...
Click to collapse
Dont panic buddy. be Calm.
Answer these questions:
1) Is you softkeys(Lightning ones) working when you were on GB..?
2) Did you mess up with anything while installing..?? what you did brief your track.
3) Hardware keys are on screen, it may be enabled from Setting. But let give feedback of above 2 questions.
back button problem solved
It was not working in gingerbread too. So i flashed cyanogenmod nightly. However I have found some temporary solution, it was probably hardware issue.
Using ES File explorer or any file manager that has root access, go to system and mount R/W
Open build.prop in text editor
go to the end of the file and add this line
qemu.hw.mainkeys=0
save and exit and reboot
when u reboot u will get soft keys in ur screen only so u can use those soft screen instead of hardware buttons and for disabling the hardware buttons u can easily do if u r in cyanogenmod
lavsen said:
It was not working in gingerbread too. So i flashed cyanogenmod nightly. However I have found some temporary solution, it was probably hardware issue.
Using ES File explorer or any file manager that has root access, go to system and mount R/W
Open build.prop in text editor
go to the end of the file and add this line
qemu.hw.mainkeys=0
save and exit and reboot
when u reboot u will get soft keys in ur screen only so u can use those soft screen instead of hardware buttons and for disabling the hardware buttons u can easily do if u r in cyanogenmod
Click to expand...
Click to collapse
Why is editing need to take place..?? you can simply enable the hardware keys from setting.
enable soft keys like in nexus
Disturbed™ said:
Why is editing need to take place..?? you can simply enable the hardware keys from setting.
Click to expand...
Click to collapse
I dont want to enable hardware keys. I want to disable it. And editing is for getting soft nexus like buttons on the screen so u can use even if ur hard keys r not working...
lavsen said:
It was not working in gingerbread too. So i flashed cyanogenmod nightly. However I have found some temporary solution, it was probably hardware issue.
Using ES File explorer or any file manager that has root access, go to system and mount R/W
Open build.prop in text editor
go to the end of the file and add this line
qemu.hw.mainkeys=0
save and exit and reboot
when u reboot u will get soft keys in ur screen only so u can use those soft screen instead of hardware buttons and for disabling the hardware buttons u can easily do if u r in cyanogenmod
Click to expand...
Click to collapse
i had tried it but not working i had installed button saviour
can you give me some steps to disable hardware keys because its getting short
i had tried adding # in 139 & 158 line but not working
so please kindly revert
azhar.munshi said:
i had tried it but not working i had installed button saviour
can you give me some steps to disable hardware keys because its getting short
i had tried adding # in 139 & 158 line but not working
so please kindly revert
Click to expand...
Click to collapse
Go to setting->Display->Hardware keys-> disable it.
is any other way to create virtual key for back & menu
please where we have to enter that code in build.prop also
azhar.munshi said:
is any other way to create virtual key for back & menu
please where we have to enter that code in build.prop also
Click to expand...
Click to collapse
you can read it above (4 post above).
i had tried it but not working
please can you give me steps with screenshots
i am on avatar rom
to disable that key i am not getting any option in setting-display-hardware keys-

[Q] Disable the end call with power button Vipers rom

I want to disable the end call with power button Vipers rom, just to turn off the screen only, please help me
demenhtlo said:
I want to disable the end call with power button Vipers rom, just to turn off the screen only, please help me
Click to expand...
Click to collapse
go to venom tweaks
probably you have changed something there
check in buttons options
rzr86 said:
go to venom tweaks
probably you have changed something there
check in buttons options
Click to expand...
Click to collapse
I tried changing the settings and tweaks venom but can not find, you can not be more detailed instructions
demenhtlo said:
I tried changing the settings and tweaks venom but can not find, you can not be more detailed instructions
Click to expand...
Click to collapse
i was searchig too in venom tweaks to find anything about power button
i couldn't too
did you try to fix permissions from recovery?
rzr86 said:
i was searchig too in venom tweaks to find anything about power button
i couldn't too
did you try to fix permissions from recovery?
Click to expand...
Click to collapse
Lol fixing permissions aint gona help.
@op go to
Settings/accessibility
Tada
Dunno if it works r not tho lol
jmcclue said:
Lol fixing permissions aint gona help.
@op go to
Settings/accessibility
Tada
Click to expand...
Click to collapse
I've tried changing the settings/accessibility but not been there, any other way? I thought to interfere with the recovery, hic
demenhtlo said:
I've tried changing the settings/accessibility but not been there, any other way? I thought to interfere with the recovery, hic
Click to expand...
Click to collapse
don't you have the power button ends call option?
rzr86 said:
don't you have the power button ends call option?
Click to expand...
Click to collapse
Yes, but it is not working, you can try
demenhtlo said:
I want to disable the end call with power button Vipers rom, just to turn off the screen only, please help me
Click to expand...
Click to collapse
Help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Q] Lockscreen issue!

Hi, so I was using my opo with stock CM11S without a hitch and when I took the phone out and hit the power button to show the lock screen it didn't respond. I had to switch the phone off and on by long pressing power button and every time the phone goes to sleep I have to do this all over. How do I stop this?
lockscreen
Bridge Ric said:
Hi, so I was using my opo with stock CM11S without a hitch and when I took the phone out and hit the power button to show the lock screen it didn't respond. I had to switch the phone off and on by long pressing power button and every time the phone goes to sleep I have to do this all over. How do I stop this?
Click to expand...
Click to collapse
Go into Settings->Security->Screen lock and try a different screen lock setting. Reboot the phone. Set it back to original. Reboot. Cross your fingers.
You can try toggling the double-tap to wake gesture, too.
Didnt work mate
proximity sensor?
Bridge Ric said:
Didnt work mate
Click to expand...
Click to collapse
Google "power button doesn't unlock oneplus":
https://forums.oneplus.net/threads/power-button-doesnt-unlock-neither-double-tap.292269/
Among other google-y things.
P.S.--glad you tried.
pbergonzi said:
Google "power button doesn't unlock oneplus":
https://forums.oneplus.net/threads/power-button-doesnt-unlock-neither-double-tap.292269/
Among other google-y things.
P.S.--glad you tried.
Click to expand...
Click to collapse
I disabled Prevent Accidental WAkeup blah and it worked!
great
Bridge Ric said:
I disabled Prevent Accidental WAkeup blah and it worked!
Click to expand...
Click to collapse
Nice move--glad you fixed it, and thanks for reporting back--that'll be the first thing I say next time someone asks.
Well you know..., either that or "use google."
Bridge Ric said:
I disabled Prevent Accidental WAkeup blah and it worked!
Click to expand...
Click to collapse
This hasn't actually fixed the problem. I'm guessing you recently went from a Lollipop ROM back to KitKat on CM11S, right? Did you flash the KitKat modem first?
Transmitted via Bacon
timmaaa said:
This hasn't actually fixed the problem. I'm guessing you recently went from a Lollipop ROM back to KitKat on CM11S, right? Did you flash the KitKat modem first?
Transmitted via Bacon
Click to expand...
Click to collapse
I did. I read about how not flashing the modems can do stuff like screen going dead on calls and stuff but I can't be bothered to flash it as we're so close to CM12S anyway so when I update to that the issues will go away anyway
Bridge Ric said:
I did. I read about how not flashing the modems can do stuff like screen going dead on calls and stuff but I can't be bothered to flash it as we're so close to CM12S anyway so when I update to that the issues will go away anyway
Click to expand...
Click to collapse
You can't be bothered? It's a simple zip flash in TWRP, takes 15 seconds.
Transmitted via Bacon

Volume button to unlock

I am extremely satisfied with the stock marshmallow (MRA58N) . The only thing that bothers me is that I need to save my power button (random power off issue when pressing power button, may fail completely in near future). Right now I am using gravity screen app to use my proximity sensor to wake the device. This does not work all the time. I end up using the power button.
I know almost all the custom rom out there supports volume rocker to wake. But I dont want to move to custom rom. So the way is to root. So here is my question
1. Will unlock the boot loader
2. Flash StephanMc_Kernel
3. Install twrp
4. Flash super su
5. After this what to do ?
samnaction said:
I am extremely satisfied with the stock marshmallow (MRA58N) . The only thing that bothers me is that I need to save my power button (random power off issue when pressing power button, may fail completely in near future). Right now I am using gravity screen app to use my proximity sensor to wake the device. This does not work all the time. I end up using the power button.
I know almost all the custom rom out there supports volume rocker to wake. But I dont want to move to custom rom. So the way is to root. So here is my question
1. Will unlock the boot loader
2. Flash StephanMc_Kernel
3. Install twrp
4. Flash super su
5. After this what to do ?
Click to expand...
Click to collapse
Your best shot, for stock ROM is Xposed and Gravity Box. But IMO there is some bugs and we must wait little for improved versions.
samnaction said:
5. After this what to do ?
Click to expand...
Click to collapse
Install this rom http://forum.xda-developers.com/google-nexus-5/orig-development/rom-cataclysm-nexus-5-t2518660
Im using VolumeUnlock App
Sent from my Nexus 5 using XDA Free mobile app
peachpuff said:
Install this rom http://forum.xda-developers.com/google-nexus-5/orig-development/rom-cataclysm-nexus-5-t2518660
Click to expand...
Click to collapse
I dont want to use an custom rom
ensboarder said:
Im using VolumeUnlock App
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Its draining battery. It wont let your phone to sleep.
Razvan said:
Your best shot, for stock ROM is Xposed and Gravity Box. But IMO there is some bugs and we must wait little for improved versions.
Click to expand...
Click to collapse
How the custom roms managed to do ? Will i get a flashable zip for it
I don't understand your question. Please be more specific in your querry and I will respond. In fact you must flash custom ROM for that volume wake up.
samnaction said:
I dont want to use an custom rom
Click to expand...
Click to collapse
Why? If you're unlocking the bootloader, flashing twrp and flashing a kernel you're almost there anyway.

Categories

Resources