Hi everyone,
Currrently facing problem with my samsung grand neo i9060 which is:
- NO OS Installed, NO DATA in memory internal (wiped by mistake)
- Twrp recovery (2.8.0.0) can't read external memory (sd card)
- Windows 7 or Odin (1.85/3.07/3.09) can't detect my device.
Already run 'adb sideload' method but still NO DEVICE FOUND in result.
Have installed many version of my device drivers but none of them is work.
please anyone...
Your suggestions will be really appreciated
Thanks in advance.
Follow this procedure to overcome in flashing phone
First of all you need to completely uninstall any driver related to your device from device manager and odin.
click on system --> property --> device manager and uninstall all driver related to your device.
Restart your system
Install drivers
Install odin
Restart system
Put your phone in download mode.
Wait if any driver install automatically.
Flash the firmware.
Done :victory:
Related
I have a Tab named Teracom-Lofty ALPS TZ100
1. I have CWM recovery installed in it with the help of MTK Droid Tools
2. i had backed Up using MTK Droid Tools (got a Zip file Named : TZ100_121214_backup_140618-105714 )
3. I tried a repartition Manager
4: I had 500 MB internal and 2.09 GB as phone storage
5. I Mistakely repartitioned it with 2.5 GB selected,it should have been selected as 2 GB
6. Then i rebooted into recovery and factory resetted to have partition successfully done
7. i Just Got my Tab turned On with just a blacklight glowing and nothing Works ( i could Get into CWN recovery mode)
8. So i thought of installing a custom ROM & downloaded this custom ROM 6572422-cleveri-rom-kitkat-wanna-be.html
9. Did not see that it was for MTK6572 , MY device is MT6575 Shown in MTK droid tool
10. installation completed succesfully,But even then it wont get booted,same problem as said in point 7
11. so i tried to install the ROM from the ZIP file of MTK droid tools backup (ie: my STOCK ROM i think) But installation Aborted now
12. Even i get the same problem
Please Help
This is my device configuration when it was working
Is in the attachment
Only Hard reset button is now used to turn the device OFF
What should i do to get the tab working
Bumping the topic, Guys please help me out
[Q] Bassoon 7" dual sim .zip SDcard recovery rom needed or USB driver for flashtool
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
MacShrike said:
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
Click to expand...
Click to collapse
Greetings Mac,
I have a similar problem with same tablet but I was able to fine the direct download site for Bassoon. It's in Chinese but you can figure it out. Scroll to the model and version (version # under 2nd battery i.e. 061) as well as the , click on link and on the page there is a down arrow and horizontal bracket on button on top to download. "SP_Flash_Tool". I am currently downloading the rom for my device but will post results.
Here's the link: http://pan.baidu.com/share/home?uk=2285182452&view=share#category/type=0
Good Luck!
bassoon stock roms with flash tool
MacShrike said:
Ls,
I'm trying to help a friend who deleted too many files from his Bassoon 7"dual sim tablet.
Now it fails to make calls and keeps saying that: "unfortunately, the system laucher has stopped".
I have no idea what he deleted (after I adviced him to install SU so he could move apps to the SDcard, so i feel responsible)
So im trying to reinstall the entire thing.
Factory reset doesnt help.
On needrom.com I found some jxd p1000 roms that might work(apparently the bassoon 7"is a jxd p1000 clone)
I have found several roms on needrom.com that might apply.
There's only 1 .zip rom that will attempt to install from SDcard. It starts but fails after a while because its the wrong ROM prob. It has android 4.1.1 and the tablet says 4.2.2.
The other roms require the flashtool.
I tried all possible flashtool that were adviced on this, and other, forums.
The problem is that the flashtools dont seem to recognize the device, neither does adb.exe.
I can use sideload but dont have the right .zip file for it. I can also copy it to the sdcard and use; recovery boot and install from SDcard but again, i dont have the right .zip ROM for that.
WIndows recognizes and is able to acess the device as a USB or as a m72_nand_p88 device.
I have installed the MTP-65xx usb drivers. some HTC usb drivers (windows reported the device as a HTC desire at some point) and the ADB usb drivers(windows reports the device as a ADB usb device if connected in recovery mode)
Questions(calls for help );
- Is there a USB driver that I haven't found that will enable me to use the flashtools so I can try the other ROMS from needrom.com
and/or
- Is there a way to convert the .rar ROMS that use the scatterfile to a .zip that i can use in reboot recovery from SDcard or use ADB sideload
and/or
:cyclops: :silly: im going crazy here....
Recap:
- I cant connect to the device with the flashtool
- I do not have the rom in a .zip that I can use in recovery from SDcard :silly:
- I do not know how, or if its possible to, convert the scatterfile/flashtool roms to a format (.zip) that I can use with recovery from SDcard or sideload (the scatterfile .rar roms are about 170Mb the .zips are about 400+ Mb so eitehr they are pre-unpacked-installed...?)
- I seriously have no idea what to do next..
Device:
samsung p1000 look alike clone; it has dual sim, 7 inch display, says bassoon on the back.
android 4.2.2
baseband: MOLY.WR8.W1315.MD.WG.MP.V8
Kernel: 3.4.5 [email protected]#1
Build: ALPS.JB3.MP.V1.12
Custom build V023
Any and all help is much appreciated!
Highest regards,
Mac
Click to expand...
Click to collapse
this is the link where you can download the stock rom for basoon phablets https://androidmtk.com/download-bassoon-stock-rom-models
they have some bugs like wifi nvram warning, no working gps, gravity, and compas
and one very very annooing chinese app that constandly sends you app announcements that you can install if you delete it than youre contacts and phone functions will not work
maybe you can fix those things
greetings flappie311
i was trying to root my phone i done it and i am trying to install a rom to it
after that i twrp and delete all files.
i have files still in my pc can someone help me how to put some zip in the phone because my pc cant detect my phone anymore.
thanks guys
Try re-installing the proper drivers for the device and also try to boot to fastboot and check if it detected. And if it does so, try restoring to official firmware.
If you can buy an OTG cable and try a pendrive. An OTG cable is a life saver in case of Mi4i since it doesn't have an MicroSD. If you haven't bought it yet, today maybe the time
If you have installed the driver. The copying from TWRP only works sometimes.
If you rooted then you must have used Fastboot so the drivers are there.
As hunkerpunk1 said install default ROM via fastboot using MiFlash.
Also if you are going to install CM12.1 or any custom roms here. You're phone must have MIUI 6 installed before not MIUI 7. So flash MIUI 6. Then root it and flash TWRP. Then install the ROM. This time copy the files inside the phone before hand
Please check if you're able to go into recovery (TWRP, NOT Stock), if answer is yes, you can use the mount option to copy those files again into your phone.
You simply need to :
1. Boot into TWRP
2. Connect the phone with PC (With Proper drivers installed)
3. Select the MOUNT option on TWRP Recovery
4. You'll see the prompt on your PC that Mi4i (with some Chinese words prepends) detected.
5. Copy the ROM & Gapps in phone.
6. BOOM (now I'm assuming you know how to move further)
I bricked my device last week with a stupid flash, and since then I've been looking for a solution flash the stock ROM back on it, and finally here is what I found! :victory:
It will overwrite your system, not the kernel, but I hope you did not touch that, it worked for me.
Requirements:
-Vowney Lite (bricked for more fun)
-SP flash tool, download here: https://mega.nz/#!uEtxzSqY!pKLnobqUsrELE8VtTQRYIMwSlCAcrcDdix-avGvwqv4
-MT6795 Scatter File, download here: https://mega.nz/#!xE0QSS4D!avdr3ARS5cIiwEU4iK8stLVFHiiUeGFYVwg3ndwWJEE
-My system image dump, download here: https://mega.nz/#!FVVhnJzC!r72wbSVdZrwp1NnPhTC2Qz9fmffJBIQMMNbbisJMndQ
-MTK preloader drivers installed, tutorial here: http://bbs.elephone.hk/thread-71-1-1.html#.VstQKvHhChc
1. Turn off your device (probably done )
2. Launch SP flash tools
3. Load the scatter file you downloaded
4. Uncheck everything, then check system
5. In the location section of the system, find the system.img you downloaded
6. Click on Download
7. Plug your device
8. When the green check appears, quit SPFT
9. Boot in recovery mode, with power + volume up
10. Wipe Cache then Wipe Data
11. Reboot :fingers-crossed:
In the image system I dumped from my phone you will get root permission with SuperSU, Cerberus Anti theft as a System App (call 2356 for settings), and few of my settings, like faster animations in developper options etc
Tell me if you find out anything else.
Hi Luxumbra! Me again
Phone was messing around yesterday and not opening any apps/crashing, so thought i'd just do a stock flash.
I followed all the steps, however I couldn't get the preloader drivers on my computer. Im runnning windows 7 and when I head to device manager, I only have "MTP USB Device" and then subsequently trying to update the drivers shows up with "WIndows has determined the driver software is up to date".
I figured out that the problem was a corrupted microSD card, however I did unroot in the process and would like to flash your provided system image on! Any ideas?
Thanks!
Thanks, I followed the steps and unbricked my Vowney. In addition to checking System in step 4, I also checked Boot. The phone is up and running.
Thanks again!
Happy to help aLmoravado
lidlband I just saw your post ^^ do you still have the problem?
Sorry I stopped a bit messing up with my phone, so I didn't come here a lot...
hello , i have flash rom but not have air gesture and possiblity to ps calibrate
is normal?
He has done the procedure you said but the touch scree does not respond, how do I help to fix the phone no longer works.
Hi all,
i have xolo q3000 . i have twrp 2.8..5.0 as recovery. i wiped everything from dalvik/cache to system to cache to data to emmc .. i have miui 7.9.30 with its port path .... when i install the miui zip file it says corrupt file , i downloaded the file twice but still says "E:Zip file is corrupt!".
i downloaded xolo_q3000_KK_S007_2052014.zip
it (twrp) says zip signature verification failed
error flashing ip /sdcard/xolo_ the whole file mentioned above.
how should i proceed ... now that i dont have OS installed , when i plug the phone to my desktop it says USB device not recognized inspite of all the mediatek usb vcom file , android cdc file installed
i ran some software which changed the partition ... my /emmc partition now is 9GB. i cant find the other
7 GB, it must be somewhere!
Where is Mr. iammurugesh?
anandvoyager said:
Hi all,
i have xolo q3000 . i have twrp 2.8..5.0 as recovery. i wiped everything from dalvik/cache to system to cache to data to emmc .. i have miui 7.9.30 with its port path .... when i install the miui zip file it says corrupt file , i downloaded the file twice but still says "E:Zip file is corrupt!".
i downloaded xolo_q3000_KK_S007_2052014.zip
it (twrp) says zip signature verification failed
error flashing ip /sdcard/xolo_ the whole file mentioned above.
how should i proceed ... now that i dont have OS installed , when i plug the phone to my desktop it says USB device not recognized inspite of all the mediatek usb vcom file , android cdc file installed
i ran some software which changed the partition ... my /emmc partition now is 9GB. i cant find the other
7 GB, it must be somewhere!
Where is Mr. iammurugesh?
Click to expand...
Click to collapse
Hi....
Download stock rom,sp flash tool,vcom driver.
And remove battery and put it again (not start device only battery put)then connect device to pc during rom flashing.
First driver of mtk is installed properly then flash it
iammrugesh said:
Hi....
Download stock rom,sp flash tool,vcom driver.
And remove battery and put it again (not start device only battery put)then connect device to pc during rom flashing.
First driver of mtk is installed properly then flash it
Click to expand...
Click to collapse
i am so happy for the reply .... my concern at this point is your last statement
"First driver of mtk is installed properly then flash it".
i have installed every possible drivers related to mtk65xx , but my desktop wont detect the connect mobile with or without battery.. any idea ?... if you have time i can provide you teamviewer bro!. what you say...
anandvoyager said:
i am so happy for the reply .... my concern at this point is your last statement
"First driver of mtk is installed properly then flash it".
i have installed every possible drivers related to mtk65xx , but my desktop wont detect the connect mobile with or without battery.. any idea ?... if you have time i can provide you teamviewer bro!. what you say...
Click to expand...
Click to collapse
Pm me