No profiles on 3G or LTE devices - Android General

I recently bought a tablet with Android Lollipop and 3G modem. I was astonished seing that there is the "profiles" feature missing. You can only set up new users but no restricted profiles. I a similar thread on a Sony model this was mentioned, too.
Is this a general "feature" of devices with 3G/LTE modem? Is there a workaround for non-rooted devices?

Related

[Q] How to create an ad-hoc wifi network from the SNS

We are attempting to connect several (rooted) developer Samsung Nexus S phones running 2.3.4 to each other using ad-hoc WiFi (with NO access-point, just the phones)
We've gone through the steps of modifying wpa_supplicant.conf to allow the phones to *connect* to ad-hoc networks. We're stuck now not being able to *create* an ad-hoc network from the phone.
Other posts on XDA show that it can be done on phones with the TI wifi chipset (modifying tiwlan.ini). Unfortunately, the SNS does not have this chipset.
These phones do support the wireless-hotspot app, which, IIRC, does create an ad-hoc wifi network, so there must be some support to create one on the phone.
Has anybody successfully *created* a wifi ad-hoc network on the SNS before?
Thanks,
Aaron

Wi-Fi Issues on MM - Original Shield Tablet

Alright, first let me say that I have had zero issues with this tablet until I upgraded to MM.
For some reason, I am having constant issues with the Wi-Fi either dropping, or changing channels. If I set the Wi-Fi to 5Ghz only, it will eventually switch over to 2.4Ghz. If I set the wireless to automatic, it will constantly switch back and forth between 2.4Ghz and 5Ghz. Setting the wireless to just 2.4Ghz still results in random drops.
So far, I have experienced this issue on all of the major MM ROMs found here in the NVidia Shield section. I event restored my tablet with the latest image from NVidia.
Is this just an inherent issue with MM on the original shield tablet? Am I going to be stuck using 5.11?
The only thing I haven't done is flash back to the original stock image and do OTAs back the latest MM update.
Any help would be appreciated.
I agree, wifi on lollipop was miles better. I also think lollipop was better on the whole. I'm on stock unrooted.
Setting the "Wi-Fi frequency Band" to "5 GHz only" shouldn't drop you to 2.4 GHz. This setting works perfectly for me as setting it to "2.4/5GHz only" results in the other band completely shut off.
If your SSID is identical for 2.4GHz and 5GHz, then yes, it can switch back and forth. However since most Wi-Fi clients are too stupid to know when to switch over, it is highly recommended to use a different SSID for 2.4 and 5GHz.
On Lollipop, there is an Android bug (it affects my phone too) where if you have SSID and SSID-5G or SSID_5G (and perhaps others), even if you never joined SSID, it'll occasionally drop the 5GHz connection and connect to 2.4GHz. This is apparently fixed on Marshmallow as my LTE tablet has remained connected to 5GHz since the update.
At least for me, my WiFi experience drastically improved with Marshmallow. So my suggestion is to make sure the 2.4 and 5GHz SSID's are different and check for interference from the neighbors using an app like WiFi Analyzer or NetX. I recommend NetX over WiFi Analyzer as it can also show you WiFi SSID's that span 40MHz.
Also note that your own home devices can also cause interference. The Roku box w/ WiFi Direct is notorious for this.
Isira said:
Setting the "Wi-Fi frequency Band" to "5 GHz only" shouldn't drop you to 2.4 GHz. This setting works perfectly for me as setting it to "2.4/5GHz only" results in the other band completely shut off.
If your SSID is identical for 2.4GHz and 5GHz, then yes, it can switch back and forth. However since most Wi-Fi clients are too stupid to know when to switch over, it is highly recommended to use a different SSID for 2.4 and 5GHz.
On Lollipop, there is an Android bug (it affects my phone too) where if you have SSID and SSID-5G or SSID_5G (and perhaps others), even if you never joined SSID, it'll occasionally drop the 5GHz connection and connect to 2.4GHz. This is apparently fixed on Marshmallow as my LTE tablet has remained connected to 5GHz since the update.
At least for me, my WiFi experience drastically improved with Marshmallow. So my suggestion is to make sure the 2.4 and 5GHz SSID's are different and check for interference from the neighbors using an app like WiFi Analyzer or NetX. I recommend NetX over WiFi Analyzer as it can also show you WiFi SSID's that span 40MHz.
Also note that your own home devices can also cause interference. The Roku box w/ WiFi Direct is notorious for this.
Click to expand...
Click to collapse
Having the same SSID for different frequencies should never be a problem. As a system administrator, I have never run into an issue such as this, unless it you have your device set to "automatic" so that it can swap back and forth between the two different bands. If I set the radio to 5Ghz only, then it should stay on 5Ghz, and vice versa with 2.4Ghz.
The issue appears to be something with MM and the original shield tablet. I reconfirmed that flashing back to the LP image I have no problems with the Wi-Fi at all.
I guess I'll keep plugging away at trying various things until I get this figured out or someone else points me in the right direction.
Just got my brand new replacement tablet from Nvidia from the battery recall. came loaded with 5.11 and zero wifi issues. I updated to 6.01 and boom! wifi issues. That means I have two tablets with the same issue. Something is up with 6.01 and the original shield tablet.
Sounds like an incompatibility with your specific network setup and the SHIELD Tablet/Google Marshmallow.
I have two SHIELD LTE Tablets both running Marshmallow 6.0.1 and I have zero issues. I find the 2.4GHz/5GHz only modes work as intended. However my 2.4 and 5GHz SSID's are different, whereas you apparently have the same SSID's for both bands.
For an experiment, I created a single identical guest SSID for the 2.4 and 5GHz networks and put the tablet in 5GHz mode. What I noticed is that 5GHz only does indeed fail occasionally, but the 2.4GHz behavior is interesting. It will only pick up all SSID signals for the single 2.4GHz channel the Guest SSID is associated with, so in my case all 5GHz channels and only Channel 1 of 2.4GHz. After a few minutes of usage, the tablet seems to go back to 5GHz only mode and the Channel 1 2.4GHz SSID signals disappear. Similarly, If I put the tablet in 2.4GHz only mode, then it will also occasionally pick up the single 5GHz channel the Guest SSID is associated with, so all 2.4GHz channels and only Channel 149 of 5GHz.
If I have my tablet connected to an SSID that is different on both 2.4/5Ghz bands, then 2.4/5Ghz only modes work as intended.
So yes, I can confirm that if you have an identical SSID for 2.4 and 5GHz modes, then the 2.4/5GHz only mode will not work properly under Marshmallow. The suggested workaround is to have different 2.4/5GHz SSID's.
Here is my question. How did I go from having zero issues on every other Android OS before marshmallow, but now this is an issue? If I load an older rom based on 5.11 onto my tablet, I don't have a single issue. To me this points to an issue with MM
TheLastBoyScout said:
Here is my question. How did I go from having zero issues on every other Android OS before marshmallow, but now this is an issue? If I load an older rom based on 5.11 onto my tablet, I don't have a single issue. To me this points to an issue with MM
Click to expand...
Click to collapse
Yes, we've already established and confirmed that there is a Marshmallow related bug with your specific use case. I have provided a workaround, which is to create a separate SSID for the 5GHz band. You have also provided a workaround, which is to downgrade to Lollipop. It is your choice to make.
You don't sound like somebody who understands software development. Basically, with every major Android OS release, Google can significantly change the underlying code which can introduce bugs. NVIDIA then takes that code and tries to make it work with the SHIELD Tablet which can introduce even more bugs.
There is a programming joke sung to the tune of "99 Bottles of Beer":
99 little bugs in the code.
99 little bugs in the code.
Take one down, patch it around,
127 little bug in the code...
Click to expand...
Click to collapse
Without a secondary Marshmallow device, I cannot confirm if the problem is on Google's end or NVIDIA's end. Nevertheless, I suggest reporting it to Google and NVIDIA. At the very least, Google can fix the problem before Android N is released, and maybe NVIDIA can fix it for a future Marshmallow release.
While I am not a programmer, I work with several programmers and do testing of software on a test system before updates are pushed out. I guess I incorrectly assumed NVidia would do the same.
Now, I've tried multiple times based off of CM and AOSP, in addition to stock (all MM based) and still have this issue, so I would assume it's an issue on Google's end.
TheLastBoyScout said:
While I am not a programmer, I work with several programmers and do testing of software on a test system before updates are pushed out. I guess I incorrectly assumed NVidia would do the same.
Now, I've tried multiple times based off of CM and AOSP, in addition to stock (all MM based) and still have this issue, so I would assume it's an issue on Google's end.
Click to expand...
Click to collapse
Honestly, this is an edge case that is rather difficult to diagnose and wouldn't even be detected under normal testing conditions. It's quite unfair to say NVIDIA didn't do any testing in this case.
I suggest submitting a highly detailed bug report to NVIDIA so that they can reproduce the issue. If NVIDIA fixes it and it is determined it is an issue with the base Android OS, they may submit the patch upstream to Google so hopefully it won't be an issue with future versions of Android.

Smartwatches with WiFi connectivity and custom apps

Hello guys!
I'm looking for a smartwatch (branded or not) with standalone possibility and wifi connectivity. I'd like to use it in a custom project, so I need to have a watch without need to be paired to a smartphone and with WiFi.
I've found a lot of chinease devices for this porpuse, but I don't know which is the best. Also, a branded watch will be preferred.
Any advice?
Thanks!

What is the go to software for hotspot cellular restriction bypassing (on a rooted device)

Hi Team!
I am super new here (and new tot he android ecosystem too!)
I recently got my first android table (Samsung Galaxy Tab A7 505 - LTE version) and successfully rooted it.
I am after a software that could allow me to hotspot my LTE/Cellular on the tablet that would not need me to alter any settings on my computers which will use the hotspot.
In the apple world (on a jailbroken device) I have used TetherMe which essentially you just turn on HotSpot on the iPhone and every device connects directly and everything magically works. (no need to set up proxies or VPNs or adjust TTLs on devices) is there anything like this in the android world (paid or free?)
Many thanks!
Bump - if anyone could give me a sort of direction?

Question Oppo A54 5G: Set different SSIDs for mobile hotspot 2.4GHz and 5GHz?

Hi everyone,
I've bought an Oppo A54 5G on the cheap here, in France, for the sole purpose of using it as a mobile hotspot, since it has 5G connectivity on both SIM cards. The phone works flawlessly, but I have an issue with one of my laptops (an Asus VivoBook X515FAC_X515FA) that will only connect in 2.4GHz mode.
I'd like to know if someone knows a way, or a third-party app, that would let me create two profiles for the mobile hotspot, one in 2.4GHz and one in 5GHz, each with its separate SSID. I think my Asus laptop might be confused when I switch from 2.4GHz to 5GHz in the hotspot settings, since both bands bear the same name (SSID).
The mobile hotspot menu in Settings is very basic, and though I can change the SSID name, I can't figure out how to create two different ones.

Categories

Resources