Guys,
I have a OPO 64gb which is in Dead State (Hard-bricked) currently.
It doesn't switch on. Nothing comes up on the screen after pressing Power button. Can't even go to Recovery Screen or Download Screen. No display, no logo, no vibration. I even tried it after keeping it for charging overnight.
This happened after my cousin tried to flash something (I have no idea what he was doing).
I have gone through many thread on this and various other forums which gives solution of Unbricking the phone. However none of them helped, because my case is a little different.
In all those Recovery procedures, it is mentioned to connect the phone to PC and press Vol Up + Power button. When I connect the OPO to PC, it is not detected at all. Even it doesn't show up in the Device Manager (no QHSUSB_BULK, as many mentioned). There is absolutely nothing which indicates that the phone is connected to PC. This is were I get stuck because I don't know what needs to be done from here.
Has anyone ever faced such an issue? How to I bring back the OPO back to life from this state? Is there a solution to this?
Please help!
What did you end up doing???
What did you end up doing???
I have the exact same situation though I wasn't trying to update anything, it just crashed and all the same symptoms appeared...
@SuzAnDroid
Dont worry,
If you are still facing the problem,
Then You can follow this Superb Link
http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Related
Hello XDA friends. This is my first official posting on the XDA site and I'm in need of serious help.
I've noticed that intense research and development has been put into this phone. With so many rom selections available for the MT4GS I decided to try out several different roms kind of playing around. Many of the roms available were very well put together.
I decided to try out the Doubleshot MIUI v0.3 as I have used on other devices in the past and liked its customization. After installing the rom I made some adjustments in the settings to personalize my phone. Everything was working fine until I rebooted my phone and now it is hard-bricked. My device is S-Off with bootloader unlocked, and prior to installing MIUI I formatted all data, Dalvik, and system. I don't know what I did to brick my device and I can't find similar issues among others.
Issue Details:
When I have the phone powered off then hit the power button my backlight will slightly light up (very dim with no splash or image), and it will vibrate (Like on a normal boot). What else is crazy is every 37 seconds it will vibrate, and this is ongoing if I let the phone sit in that state.
If I have the phone off and plug it in a power source I get no love.
I'm unable to access HBOOT or Recovery mode, and the phone is not detected when connected to PC.
Please help me.......
that looks like a screen/digitizer problem. I don't think you're even bricked seeing as you didn't mess with any partitions according to what you did above. Also if the phone vibrates and the backlight turns on then it's still alive.
Thanks for the response. I'm sure the screen is fine. I performed the reboot when the issue first happened. This phone is driving me crazy.
wait u said you phone isn't connecting to adb right?
Did you try Fastboot?
I'm not able to bring up the HBOOT menu to enter fastboot mode.
have you tried a battery pull?
Thanks for the reply. I have tried pulling/replacing the battery and didn't have any luck. I also have two spares and the issue continues........
I can't figure it out, or figure what I did exactly to cause this.
Any other ideas?
does adb recognize it when it is plugged in?
Hi all,
I've a Samsung Nexus S here from a friend of me.
The phone was rooted and flashed with Cyanogenmod 10.1. Without any special action the phone doesn't power on again after a reboot (during a software update CM10.1). There's nothing. Only a black screen. No lights! Nothing...
I've tried to power on it for several times. I've tried to start it into the download mode and the fastboot mode. But only a black screen. My computers Mac, Linux, Windows are detecting nothing when I'm connecting them to the phone.
Do you've any ideas for unbrick this nexus s?
regards
Marco
MarcMarin said:
Hi all,
I've a Samsung Nexus S here from a friend of me.
The phone was rooted and flashed with Cyanogenmod 10.1. Without any special action the phone doesn't power on again after a reboot (during a software update CM10.1). There's nothing. Only a black screen. No lights! Nothing...
I've tried to power on it for several times. I've tried to start it into the download mode and the fastboot mode. But only a black screen. My computers Mac, Linux, Windows are detecting nothing when I'm connecting them to the phone.
Do you've any ideas for unbrick this nexus s?
regards
Marco
Click to expand...
Click to collapse
That's exactly what I'm working on right now.. Let's start with the basics.. Do you have a good cable (tested with other micro-usb devices?)? If so, on Linux, under terminal, does the lsusb command show any Samsung devices while connected?
Hi,
I have a similar problem.
My Nexus S suffers from the power button bug with the power button occasionally not working. When I turned it off today (using the terminal as I always do) it shut down as normal. However, when I tried to start it again it, it would not boot. When I press the power button (it usually works to start the phone, it just does not work within the recovery / OS), the backlight turns on but there is no vibration and it does not proceed to the Google logo. Similarly if I try to start it using the charger, the backlight turns on but it does not proceed from there.
Linux does not recognise the device, i.e. neither dmesg nor lsusb show any output. Therefore I cannot use the Unbrickable Resurrection tool.
Would doing that be helpful?
http://forum.xda-developers.com/nexus-s/development/i9020t-nexus-s-development-platform-aka-t1566475
I cannot enter Fastboot or Download mode. Again, only the backlight turns on.
Is it a hardware fault?
Has anyone had similar problems?
Thanks.
Yes, it will if yours is a i9020a or t. BUT you need a VERY steady hand and PROPER soldering equipment.. I had mine in Dev mode but it wasn't flashing anything, so I thought I didn't do something right, took it all back apart, and 20 mins and a popped micro resistor (from too much heat from the soldering wand) later, I had a completely dead phone.. So if you attempt it, be very careful.. If you don't feel comfortable you can do it, I would definitely find someone who can..
I wanted to solve this problem on my own but after almost 6 hours I just can't figure it out. Its either totally bricked or I'm just missing something simple. I've seen many people complain about this problem but none of them seem to have had the same problem I do. Thing is I was just really starting to love the way I had the phone set up. DAMN!
I used this thread to root: (CF)
http://forum.xda-developers.com/sprint-galaxy-s5/help/q-root-galaxy-s5-sport-sm-860p-t2859473
SPRINT GALAXY S5 SPORT SM-G860P
Android 4.4
I had CW recovery installed
(wish I had more info about the software)
Here's whats happening:
START
(vibrate)
RECOVERY BOOTING...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
(Also on Screen are the logos)
Samsung Galaxy S5 Sport
Powered by Android
This stays on for about 10 seconds.
Then blank screen (2 seconds)
(vibrate)
Screen still blank (2 seconds)
REPEAT (Auto reboot and goes back to start)
Other notes:
Trying to boot into recovery (home+vol up+power) Nothing Happens
Try to power off and nothing happens.
Pulled battery, did the 30 sec and restarted no change.
I have all updated usb drivers.
Odin will not see the device because its not on long enough. (Kies didn't see it either.)
Plug into PC via usb - Nothing Happens, device doesn't even show up because its not on long enough (win 8.1 and 7)
Pull battery to get it to stop, once battery goes back in, it auto starts again.
I TRIED AS MANY SD CARD / BATTERY/USB CABLE/POWER CABLE/BATTERY PULL/BUTTON COMBINATIONS AS I COULD FIND ONLINE AND THEN SOME. No Luck with anything.
I know this isn't a "help desk" I just wanted to give as much info as possible hoping to help you help me!
Please point me in the right direction.
Thanks!
Try to hard-reset your phone. There is a button combination for that., search it over the internet.
Thanks for the reply.
Unfortunately the hard reset combo does nothing. I've tried every button combination that I have been able to find with no luck. Factory reset, hard reset, etc. etc. no luck. I've also searched for a possible "hidden" button underneath the back cover or something of the like...nothing.
hmmmm
At least, it is not hard-bricked. So there is hope.
Have you checked if it is entering the download mode? If not, then try it. You can use this mode to flash file via the PC.
Check this link
It worked! Obviously I didn't search or try as many things as I thought I did. : / I can't thank you enough! wow. Amazing!
Thread closed.
My MI4c is stuck in the Enter Download Mode and now its Blacked out (wont turn on, tried pushing buttons and its combinations but nothing seems to work)
So, the chronology before this catastrophe happened is as follows :
>I was interested to try the new MIUI, and followed the following tutorial : miuitutorial.com/2016/09/sudah-jamannya-miui-8-xiaomi-mi4c-kamu.html
>As the story goes, i finally ended up in the Enter Download Mode (the tutorial stated that under the mode, the Screen will go Blank, and it did, up to the moment i posted this)
>The next step in the tutorial is to open MiFlash and push the Refresh button, but when i did the program responded with 'Specified Cast is not Valid'
>I tried the following solution i found in here : miuitutorial.com/2016/08/bermasalah-dengan-driver-signature-mi.html
>I did it through again up to the restart laptop phase
>The Screen was still Blank (no signs of life whatsoever, the charging lights wont even beep upon charging)
>I was beginning to suspect something was wrong, and as i checked MiPCsuite, the Tray Icon showed that no device was connected (the phone was officially dead)
>Thus i panic and tried almost everything, pressed buttons and combinations, plugging chargers on and off, etc. but nothing seems to work
There goes my story, for the record, the phone i have is still new and everything.
I havent tried googling deep for this matter, but as i am panicking i think my judgement and analyzing skills are currently on the low, so if anybody have anything that might help or links or anything please Hook me Up, I'm all Ears.
Thanks a lot beforehand and Big Ups to the XDA community.
vivasto said:
My MI4c is stuck in the Enter Download Mode and now its Blacked out (wont turn on, tried pushing buttons and its combinations but nothing seems to work)
So, the chronology before this catastrophe happened is as follows :
>I was interested to try the new MIUI, and followed the following tutorial : miuitutorial.com/2016/09/sudah-jamannya-miui-8-xiaomi-mi4c-kamu.html
>As the story goes, i finally ended up in the Enter Download Mode (the tutorial stated that under the mode, the Screen will go Blank, and it did, up to the moment i posted this)
>The next step in the tutorial is to open MiFlash and push the Refresh button, but when i did the program responded with 'Specified Cast is not Valid'
>I tried the following solution i found in here : miuitutorial.com/2016/08/bermasalah-dengan-driver-signature-mi.html
>I did it through again up to the restart laptop phase
>The Screen was still Blank (no signs of life whatsoever, the charging lights wont even beep upon charging)
>I was beginning to suspect something was wrong, and as i checked MiPCsuite, the Tray Icon showed that no device was connected (the phone was officially dead)
>Thus i panic and tried almost everything, pressed buttons and combinations, plugging chargers on and off, etc. but nothing seems to work
There goes my story, for the record, the phone i have is still new and everything.
I havent tried googling deep for this matter, but as i am panicking i think my judgement and analyzing skills are currently on the low, so if anybody have anything that might help or links or anything please Hook me Up, I'm all Ears.
Thanks a lot beforehand and Big Ups to the XDA community.
Click to expand...
Click to collapse
See here if this helps http://en.miui.com/thread-170110-1-1.html
post #7
Hi , i have working with more than 100 xz2 phones , i got many problems and fix it (google and xda) , so I think I can help you to fix your problem with xz2 asap if u ask me in this post
My exp :
Flash
Unlock
Root
and some small problems...
[deleted]
sinommo said:
Hi , i have working with more than 100 xz2 phones , i got many problems and fix it (google and xda) , so I think I can help you to fix your problem with xz2 asap if u ask me in this post
My exp :
Flash
Unlock
Root
and some small problems...
Click to expand...
Click to collapse
Hello,
My wife's Sony Xperia XZ2 Compact with model number H8324 has an issue with booting or maybe the launcher getting stuck in a loop after getting to the lock screen for a split second.
The phone seems to boot like normal and gets to the lock screen, we are even able to punch in one or two digits of the 4 digit pass code. Then it goes into a loop of the notification bar and back button flickering. From then on the phone is not responding except for the power button which brings up the normal "Turn off, Reboot, and Lockdown" menu. The issue just started out of nowhere yesterday morning and we haven't been able to fix it yet. We haven't done any rooting or custom rom flashing, it's running the official Sony software but it's out of warranty.
Here's a video showing the issue. The video shows the whole boot process but the link takes you to the last part after the logos.
We would love to get some files off it so if there is a way anyone can help us with that we'd prefer it over a hard reset.
Things we've already tried
Turning the phone off and on again
Unlocking the phone in the split second the lock screen works, this is just too short to swipe up and then put in four digits.
Rebooting the phone
Booting while charging
Booting into safe mode (this has the same issue)
Connecting the phone with USB to a pc, the phone is recognized by Windows, but it doesn't share it's filesystem with Windows.
Connecting the ADB to it, alas usb debugging is not yet enabled on the phone
Trying to get into recovery mode, we haven't been able to get into the recovery menu. Googling seems to indicate it might be holding volume up + power button when the phone is off but then it doesn't seem to do anything at all.
We're currently trying to run out the battery of the phone to see if that will resolve the issue on it's own.
If anyone has any idea, we would love to hear it.
mohhom said:
Hello,
My wife's Sony Xperia XZ2 Compact with model number H8324 has an issue with booting or maybe the launcher getting stuck in a loop after getting to the lock screen for a split second.
The phone seems to boot like normal and gets to the lock screen, we are even able to punch in one or two digits of the 4 digit pass code. Then it goes into a loop of the notification bar and back button flickering. From then on the phone is not responding except for the power button which brings up the normal "Turn off, Reboot, and Lockdown" menu. The issue just started out of nowhere yesterday morning and we haven't been able to fix it yet. We haven't done any rooting or custom rom flashing, it's running the official Sony software but it's out of warranty.
Here's a video showing the issue. The video shows the whole boot process but the link takes you to the last part after the logos.
We would love to get some files off it so if there is a way anyone can help us with that we'd prefer it over a hard reset.
Things we've already tried
Turning the phone off and on again
Unlocking the phone in the split second the lock screen works, this is just too short to swipe up and then put in four digits.
Rebooting the phone
Booting while charging
Booting into safe mode (this has the same issue)
Connecting the phone with USB to a pc, the phone is recognized by Windows, but it doesn't share it's filesystem with Windows.
Connecting the ADB to it, alas usb debugging is not yet enabled on the phone
Trying to get into recovery mode, we haven't been able to get into the recovery menu. Googling seems to indicate it might be holding volume up + power button when the phone is off but then it doesn't seem to do anything at all.
We're currently trying to run out the battery of the phone to see if that will resolve the issue on it's own.
If anyone has any idea, we would love to hear it.
Click to expand...
Click to collapse
I think u just need to reinstall rom file with newflasher and stock rom , did u tried it ? with newflasher newest version , u still can keep the personal files and flash stock rom for the phone , then i think this phone will run normal again
If u dont know how to do that , reply comment here , but u should turn off the phone to keep battery well , if u can't turn off the phone , try to press and hold volume up button + power button within 5 sec , phone will vibrate 3 times and totally off
Is there a way to get a stock recovery if somehow the recovery has been deleted?