hello i got a Q102 A31S tablet,
i flashed a wrong CWM .
i try to re flash it with firmwares for this model . i got 3 differents firmwares :
from livesuit all say " image file invalid"
from phoenixsuite " error 0x162 mbr down"
with phoenixcard, i can make a bootable microsd as "product" : the tablet boot with a red rectangle progress bar,
and stuck here,no progress, even if i wait 2 hours.
if i burn card as "startup" its boot from extsd and work,but with no intsd card mounted, 2go internal storage instead of 16go,
and apps/browser cant save downloaded content " no sdcard mounted"
i tried with FElix-master from github (windows version)
if i try to flash image or rewrite mbr with the command "ruby felix --mbr sunxi_mbr.fex"
i got a error , 'cant write new partition'
so i just wonder if the cause is the wrong CWM , or if my tablet is just dead ?
what can i do if programs cant rewrite partition ?
thanks if someone can give me any hint for a solution .
Related
Hello, (i'm sorry if my english is not good, i m a frensh people...)
After flashing rom with official Gingerbread 2.3.3, i lost my internal memory ==> my galaxy tab P1000 have near 16.0 Go memory and now i have 1.19 Go !!!
I tried to flash with other rom like overcome and cyanogen but it is always the same.
I tried to format my disk with no results.
Moreover, i dont want to return with a rom less than 2.3.3, somebody have a solution ????????????????
Could you help me please ?
THANK YOU VERY MUCH.
Is there any software which could format my internal memory or format all of the tab memory ?????
It seems that my internal sdcard could not be mounted:
on recovery, when i launch "mount /sdcard" i have the following error:
"error, can't mount sdcard"
How can i mount my internal sdcard ????
Please help Me..................
Hello,
Nobody could reply ????
I think this link could help me: http://forum.xda-developers.com/showthread.php?t=1117142
Because my sdcard is not reconized.
But my problem is: how boot the galaxy tab to "fastboot mode " ?
I know how set it to download mod or recovery but not fastboot....???
when i launch this command: "fastboot devices" no device is found, nothing happend.
Do you have an idea please ????
Could you help me because i spend a lot of time without finding anything.....
Thank you very much
Hi,
I've got a "FLYTOUCH 8 SUPERPAD Android 4.0" with 4gb of hdd (nand). (rooted)
i've tried to add a 32gb sdcard inside this tablet, and after i've putted in the internal slot, everything was ok (it was recognised as
/mnt/extsd/sdcard2), but i've wanted it to be mounted on /mnt/sdcard to install linux with "linux-complete-installer" -> 2gb wasn't enought.
I've made a backup of the /system partition using dd on the external sdcard, and i've remouned the /system in write mode and modified the vold.fstab in /system/etc.
(i've also made a backup of /data patition, but i dont know if it fully worked because i needed to run e2fsck to repair it)
I've deleted the sdcard line (commented this nand partition) and put the sdcard2 partition on /mnt/sdcard, rebooted this tablet and i'm stuck on android loading screen.
I've tried to restart in recovery mode, but the only thing that i found is a combination of (power + home), but have a weird droid picture (he is dead with a red triangle) and tried to get a menu with +, -, home etc but nothing appear.
I've got few questions:
_why this partition/modification make android crash (the 32gb card is formated as *fat partition, and was recognised with android)
_is there a way to restore the /system backup with another SD, or using adb of something else?
_where is the boot script to see if there is a way to read somenthing useful on the /system backup?
(the /system partition is on nand so i cant run a dd to restore it...)
Others info, on the /system backup, i've get a buid.prop file (i can post the whole file if needed, maybe useful or not)
ro.build.version.released=4.04 (probably the android version)
ro.product.model=BC1003
ro.build.product=crane-bc1003
ro.product.firmware=1.5rc4
...
Thanks a lot!
I've solved this problem.
Connecting it to a computer make it boot (i've tested using DDMS on eclipse to see processes).
I've restored the old vold.fstab with adb. (mounting the rescue image)
I've changed sdcard -> the nand to extsd (on sdcard2) and sdcard2 to /mnt/sdcard with an sdcard type.
So now i've got my 32gb microsd working as internal storage.
Happy new year
Tablet flytouch 8 brick
hello guys!
I would like to have help. I have a Flytouch 8, and it will not start. when I click on POWER and HOME buttons appears a red triangle with an exclamation point. somehow recover the tablet!! help!
Hi guys ! I have the same problem - after POWER+HOME appears droid pictures with red triangle, but without text menus . Did anyone know how to fix that ?
Marco.ml said:
I've solved this problem.
Connecting it to a computer make it boot (i've tested using DDMS on eclipse to see processes).
I've restored the old vold.fstab with adb. (mounting the rescue image)
I've changed sdcard -> the nand to extsd (on sdcard2) and sdcard2 to /mnt/sdcard with an sdcard type.
So now i've got my 32gb microsd working as internal storage.
Happy new year
Click to expand...
Click to collapse
Bro I almost have the same problem. My tablet is Skyworth S71 3G, I replaced the vold.fstab with the one I have downloaded somewhere. I have a backup of the original fsta. Do you think I can restore it using DDMS? I do not have a stock ROM, even searching the internet, I cannot find one. Please help.... Thanks.
help please
Marco.ml said:
I've solved this problem.
Connecting it to a computer make it boot (i've tested using DDMS on eclipse to see processes).
I've restored the old vold.fstab with adb. (mounting the rescue image)
I've changed sdcard -> the nand to extsd (on sdcard2) and sdcard2 to /mnt/sdcard with an sdcard type.
So now i've got my 32gb microsd working as internal storage.
Happy new year
Click to expand...
Click to collapse
Hi, could you be more specific on how you changed the external sd for the internal sd? i would appreciated it too much if you paste all the vold.fstab. thanks :fingers-crossed:
b0gue said:
Hi, could you be more specific on how you changed the external sd for the internal sd? i would appreciated it too much if you paste all the vold.fstab. thanks :fingers-crossed:
Click to expand...
Click to collapse
finally got it
dev_mount sdcard2/mnt/extsd/sdcard2 auto....
dev_mount sdcard /mnt/sdcard auto...
thank you
b0gue said:
finally got it
dev_mount sdcard2/mnt/extsd/sdcard2 auto....
dev_mount sdcard /mnt/sdcard auto...
thank you
Click to expand...
Click to collapse
I got an error "access denied" when when pushing the file thru adb. Also, the file explorer at DDMS is EMPTY. Please help, greatly appreciated.
If you pressed POWER + HOME and got stuck with the red triangle, you must press HOME again to display the recovery menu. Then choose the option you want with VOL +/- and confirm with POWER.
wsurfer0 said:
If you pressed POWER + HOME and got stuck with the red triangle, you must press HOME again to display the recovery menu. Then choose the option you want with VOL +/- and confirm with POWER.
Click to expand...
Click to collapse
I have the same problem but it wont enter in recovery. Its stuck in the dead android with the red triangle. Any ideas?
Marco.ml said:
I've solved this problem.
Connecting it to a computer make it boot (i've tested using DDMS on eclipse to see processes).
I've restored the old vold.fstab with adb. (mounting the rescue image)
I've changed sdcard -> the nand to extsd (on sdcard2) and sdcard2 to /mnt/sdcard with an sdcard type.
So now i've got my 32gb microsd working as internal storage.
Happy new year
Click to expand...
Click to collapse
How you restore de old vold.fstab with adb? please help me, I have a bricked tablet for change the vold.fstab.
Flytouch 8 ,SuperPad VIII ,Crane BC1003 [Allwinner A10]
Recovery ,Costum roms ,stock roms ,Programs to flash etc - on one please to download [Has on it own tut maked by my but in Polish - but no problem to use Google Translate to translate needed text]
Link: I dont have 10 post to pasta her link - so link in my profile
Hey guys,
I want to repair the i9003 for a friend and I'm a little bit confused o.0
I own a i9001 so I'm familiar with Odin and that stuff.
He gave me the device which only had access to the Download Mode. So I flashed a Stock ROM (MODEM, CODE, CSC, ...). It ended in bootloop and previous appeared note in recovery that it wasn't able a access to the sd card anyway ("unable to write to ums lunfile" and can't mount).
I flashed various Stock ROMs but everytime the same conclusion (bootloop). I've already tried to format/(un)mount sdcard through CWM but no chance.
Can anyone help? I read about a method where you have to open the device and connect something to the mainboard but it isn't my device, so I wouldn't do it.
Need help
rboy28 said:
Hey guys,
I want to repair the i9003 for a friend and I'm a little bit confused o.0
I own a i9001 so I'm familiar with Odin and that stuff.
...
Need help
Click to expand...
Click to collapse
if phone is rooted go this dir mnt/sdcard/(files)
u can do this with wondershare mobile go program (wondershare mobile go is a software that allow u to manage phone file edit or install app or read massage that nice):cyclops:
so.. mnt/sdcard(files) .export those files with wondershare mobile go from that toolbar .
see can u do this or u will get error during export(beware after export import it and make backup) ?or check it maybe these files are deleted and sdcard folder is empty like my problem.
all my regret is why i didnt backup from that.when i bought it first day.
anyway i have same problem .phone doesnt recognize int/ex sd card and unavailable keep goin thread to find .wont fix with flash by odin at all .
tell me about those files try find them maybe they are corrupted .like mine.i think must take it from other i9003 that hasn't sd card problem.when u find plz upload cuz i need too
and it this case problem will fix with a simple copy paste and if not u dont lose nothin
I can't do that. When I type "diskpart" in cmd.exe and "list disk" there will be no device found (only the hard drive in the computer).
But the PC recognize a device connected to it because in the taskbar the icon for a connected USB drive is shown.
In short:
- device doesn't boot normally (bootloop at logo)
- in stock recovery and CWM there is no internal sdcard shown ("E: can't mount sdcard")
- windows recognize a device but has no access to it
Is it possible to use adb sideload anyway on the i9003 or anything else where I can use adb.exe? I don't know if adb works in Download Mode ... does it?
I tried this CWM: http://forum.xda-developers.com/showthread.php?t=1351056 and an another one with green letters.
The first is quite outdated (packed in 31.01.2012).
Is there a newer one?
Here are photos what the Recovery (stock) says after Odin flash (stock firmare)
rboy28 said:
I can't do that. When I type "diskpart" in cmd.exe and "list disk" there will be no device found (only the hard drive in the computer).
But the PC recognize a device connected to it because in the taskbar the icon for a connected USB drive is shown.
In short:
- device doesn't boot normally (bootloop at logo)
- in stock recovery and CWM there is no internal sdcard shown ("E: can't mount sdcard")
- windows recognize a device but has no access to it
Is there a newer one?
Click to expand...
Click to collapse
i had exact same paroblem
do this maybe work (worked for me) .
this problem occurred when i used 16 gb toshiba as ex sd card (doesnt matter brand) after flash sd card and format it by pc that said ex sd remove unexpecteldy and turned off and whole battery charge was over. then i changed ex sd with my other phone and it work with no problem and when i replaced again 16 gb toshiba in phone ,again problem.
but after i format internal storage by phone from setting/phone storage . phone couldnt mount int sd till now.
so i inserted new ex sd and flashed whole rom with odin (MODEM, CODE, CSC, ...) phone started but without int storage i found out sd card directory is different and wont fix with flash STOCK ROM .but i doubt it for Custom ROM.
then i took ex sd card out from phone and turn it on again phone didnt boot up and was hang on samsung logo (same problem with 16 gb toshiba).then put that new ex sd card in and phone was boot up with no problem but int storage didnt come back..
so try with new ex sd and try flash rom (MODEM, CODE, CSC, ...) with odin then it will boot up.
---------- Post added at 07:59 AM ---------- Previous post was at 07:46 AM ----------
rboy28 said:
I can't do that. When I type "diskpart" in cmd.exe and "list disk" there will be no device found (only the hard drive in the computer).
But the PC recognize a device connected to it because in the taskbar the icon for a connected USB drive is shown.
In short:
- in stock recovery and CWM there is no internal sdcard shown ("E: can't mount sdcard")
- windows recognize a device but has no access to it
Is there a newer one?
Click to expand...
Click to collapse
after phone booted up again (in not case bootloop again)try root it with odin if u on 2.3.6 or super on click or other if u on froyo 2.2 then go turn on usb debuggin and use ''wonder share mobile go'' (software) and plug usb up run wondershare and it will recognize phone go to phone thorough wondershare if ur device is rooted u can access all phone files and folder then go to tis dir>>mnt/sd card/(files) <<<<upload for me these files
---------- Post added at 08:07 AM ---------- Previous post was at 07:59 AM ----------
rboy28 said:
I can't do that. When I type "diskpart" in cmd.exe and "list disk" there will be no device found (only the hard drive in the computer).
But the PC recognize a device connected to it because in the taskbar the icon for a connected USB drive is shown.
In short:
- in stock recovery and CWM there is no internal sdcard shown ("E: can't mount sdcard")
windows recognize a device but has no access to it
Is there a newer one?
Click to expand...
Click to collapse
and if ur int sd card come back again it will solve E:cant mount sdcard .first do two prior steps . for bring back internal sd again i think we need >>mnt/sdcard/(files) and copy paste those files in that location from other i9003 phone to our devices IMO cuz i tried many method they are useless. upper 60% im sure those files will revive int sd
I already solved it by destroying the internal memory on board and force install the stock ROM on an external sdcard. I successfully installed CM11 and it works except camera and downloads ^^
hi, have anyone found solution on this issue?
i am also facing same issue....
rboy28 said:
I already solved it by destroying the internal memory on board and force install the stock ROM on an external sdcard. I successfully installed CM11 and it works except camera and downloads ^^
Click to expand...
Click to collapse
Hi Friend,
I have the same problem. flashing Stock, Kernel , custom rom. Nothing make my phone successfully boot up.
Can you help me how exactly you did this. It might give a life for my friends phone too...
Remove or replace microSDCard.
Perform a clean flash with ddlf2 or original firmware.
And let us know how it went.
Also i see people saying this mistake several times...
Internal SDCard or SDCard stands for phone storage.
Emmc/External Storage/ External SDCard Stands for the microSDCard.
Noting that custom roms usually change the names.
With a custom rom the microSDCard is called emmc inside the system.
Please press "Thank" button if it helped you.
Sent from my GT-I9003 using XDA Free mobile app
Hello,everyone.These days I'm trying to port twrp recovery to my device,but it occured that this recovery need at least about 16 MB free space in the recovery parition which my vender left me only 6 MB space.(눈_눈)
I tried to use the fdisk comand in terminal emulator,to edit the android-scatter.txt in the usb flash package,or to edit the mbr and ebr file,but all these did nothing but turned my device into a brick.
Is there any solutions?Is it possible to put the recovery in data parition and lauch it?
Thanks for help.
ch2925437466 said:
Hello,everyone.These days I'm trying to port twrp recovery to my device,but it occured that this recovery need at least about 16 MB free space in the recovery parition which my vender left me only 6 MB space.(눈_눈)
I tried to use the fdisk comand in terminal emulator,to edit the android-scatter.txt in the usb flash package,or to edit the mbr and ebr file,but all these did nothing but turned my device into a brick.
Is there any solutions?Is it possible to put the recovery in data parition and lauch it?
Thanks for help.
Click to expand...
Click to collapse
Ask Here
Ferenczy68 said:
Ask Here
Click to expand...
Click to collapse
Thanks for help.I've moved my question.
Asked elsewhere [Q]How to expand android partitions?
Thread closed.
I have got notification on my mobile "Damaged Phone storage". The problem is the internal storage, which can not be physicaly repleced with other one.
After connecting the mobile to PC everything is working. There are all files on the card, it is possible to copie new files on it, an from it, etc. The problem with the storage is only on Android. Of course I tried to format it on adroid.
I try to solve this problem the whole week, and have no more idea how to do this
I made all possible action form Recovery. I tried to change the vold.fstab file in system, which is not possible 4.4.2
I flashed the mobile via SP Flash Tool several time, and it still does not work. Unfortunately I have not the oryginal ROM, only the backup from my mobile. My mobile is Chinese Alps A9+ built on MTK 6582. I even tried to change the primary partition from this topis: http://forum.xda-developers.com/showthread.php?t=2455850 , but no matter how big the size of storage is, on PC it is working on Adroid it does not.
So, have you the Custom ROM for Alps A9+ (MTK6582) - (The only one i can find on the internet does not work "A-9+_141014_backup_150326-103833")
or maybe you know the other proceder how to fix it
I tried to flash new rom, but they still do not work properly. Each time was end up with the same notification "Damaged SD Card" or "Damage Phone storage"
I made Memory Test via SP Flash Tool and the Test has finished with two errors:
NAND Flash wos not detected!
and
UFS was not detected!
What exactly do they mean?